Drawing 600 mtrs HT ABC using HT pole from Tharatta to Nilami at Electrical Section Kachani under Electrical Div

Fitting one Additional75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Providing Strut using LT PSC pole incl. digging & back filling pit.

Cutting Channel/Cross Arm/Angle Iron into two pieces.

Welding charge for welding on iron parts using arc welding as per standards (cost index(e) : 1 included in Rate)

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms,insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Stringing one km LT 3ph 5 wire line (Rabbit for Ph and Weasel for N&St.main) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Straightening one Slanted LT pole after unbinding the line and rebinding the line after work.

Renewal of existing damaged/broken old LT stay with existing stay rod.

Additional rate for excavation of one Pit for LTPole/LT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Providing Stay for LT poles incl. digging & back filling pit.

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Installing One No. 4 waySatellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Providing End Caps

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Erection of suspension clamp for 11KV ABC of any size

Erection of suspension clamp for LT ABC of any size

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross Arm.

Erecting one 160kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane