Construction of Nagarpalika Library at Devbhoomi Dwarka, Dist. Devbhoomi Dwarka (Third Attempt)

Bill of Quantities

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Clearing and grubbing road land including uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

1 Hectare 0.12 28,455.09 Hundred Fifty

stumps of trees cut earlier and disposal of unserviceable materials (C)

By mechanical means in area of light jungle Nine Paise

Excavation for foundation upto 1.5 m depth including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto Cmt 441.20 627.47

50 Meter lead.(E) Hard Rock Seven Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including

3 sorting out and stacking of useful materials and disposing off the Cmt 157.70 651.26

excavated stuff upto 50 Meter lead.(E) Hard Rock Six Paise

Filling in plinth and foundation with sand under floors including Eighty One

watering ramming, consolidating and dressing complete Rupees Eighty

Filling in foundation and plinth with murrum or selected soil in layers

5 of 20cm. thickness including watering, ramming and consolidating Cmt 558.50 301.78

etc. complete. (more than 10 ton) Paise

Filling available excavated earth (excluding rock) in trenches. One Hundred

plinth, sides of foundations etc. in layers not exceeding 20 cm. in Thirty Six

depth consolidating each disposited layer by ramming and Rupees Ninety

watering. Two Paise

Carring out plinth treatment to post construction / existing structure

by spraying chemical solution for termite control treatment including

labour and material consistent with I.S.I specification. Using

Chlordane and Chiorpurfiles 20 EC. As Per 6131_paret-II

7 Concentration Weight one percent is recommended i.e one liter 20 Smt. 276.20 124.35

EC chemical emulsion with 19 liter give 1 % concentration inclusive Five Paise

of one liter chemical emulsion application at the rate of 5 Liter

chemical/ Sqm of surface is recommended as per I.S. (The Product

performance shall carry Guarantee for 5 years)

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse Seven Hundred

8 sand : 4- graded stone aggregates 20 mm nominal size) and curing Cmt 152.94 3,784.74 Eighty Four

complete excluding cost of formwork in (A) Foundation and Plinth Rupees

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

9 sand : 6- crushed stone aggregates 20 mm nominal size) and curing Cmt 0.00 4,130.19

complete including cost of formwork in (A) Wall Caps / Coping Nineteen Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

GRADE SLAB (M200) : Providing and laying controlled cement Four Thousand

concrete M.200 Concrete with all lead, including all transportation, Eight Hundred

10 pumping, pouring, curing of concrete etc complete including the cost Cmt. 36.50 4,868.00 Sixty Eight

of formwork but excluding the cost of reinforcement for reinforced Rupees Zero

concrete work in M200 Grade Slab Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

11 Cmt. 97.20 4,797.50 Ninety Seven

excluding the cost of reinforcement for RCC work in Foundations

footings, base of columns and Raft etc., for any type of cross section Paise

area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

12 Cmt. 11.00 6,866.99 Sixty Six

excluding the cost of reinforcement for RCC work in column up to

plinth lvl. etc., for any type of cross section area complete as directed Nine Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

13 Cmt. 37.70 6,787.20 Eighty Seven

excluding the cost of reinforcement for RCC work in TIE, GROUND, &

PLINTH BEAMS for any type of cross sectional area. etc., complete as Paise

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with Seven

vibrator curing centering & shuttering in true line and level etc, but Thousand Nine

14 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical Cmt. 28.50 7,980.82 Hundred Eighty

and horizontal fins)., & (F1) Wall cap & coping up to G.F. level., etc. Rupees Eighty

Complete, as per detailed & directed by Architect / Consultant & and Two Paise

directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

15 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical Cmt. 2.50 8,022.23

and horizontal fins)., & (F1) Wall cap & coping For First Floor level., Three Paise

etc. Complete, as per detailed & directed by Architect / Consultant &

and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

16 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical Cmt. 0.20 8,063.64

and horizontal fins) & (F1) Wall cap & coping For For Second Floor Four Paise

level., etc. Complete, as per detailed & directed by Architect /

Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing Seven

complete including cost of necessary, form work, compacting with Thousand Nine

vibrator curing centering & shuttering in true line and level etc, but Hundred

excluding the cost of reinforcement for RCC work in (D) For Columns Twenty One

for any type of cross sectional area for G.F. Lvl. etc., for any type of Rupees Ninety

cross section area complete as directed by E. I. C. Four Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and laying controlled cement concrete M:25 and curing Seven

complete including cost of necessary, form work, compacting with Thousand Nine

vibrator curing centering & shuttering in true line and level etc, but Hundred Sixty

excluding the cost of reinforcement for RCC work in (D) For Columns Three Rupees

for any type of cross sectional area Work at First floor etc., for any Twenty Four

type of cross section area complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

19 Cmt. 5.30 8,004.65 Four Rupees

excluding the cost of reinforcement for RCC work in (D) For Columns

Sixty Five Paise

for any type of cross sectional area Work at Second floor etc., for any

type of cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

20 Cmt. 8.60 7,029.50 Twenty Nine

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

LINTEL & SILL & COPING for all cross sectional area at G.F. Lvl. etc., Paise

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

21 Cmt. 6.80 7,070.81 Seventy

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

LINTEL & SILL & COPING for all cross sectional area at F.F. Lvl. etc., One Paise

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing Seven

complete including cost of necessary, form work, compacting with Thousand One

vibrator curing centering & shuttering in true line and level etc, but Hundred

excluding the cost of reinforcement for RCC work in LINTLE-BEAM, Twelve Rupees

LINTEL & SILL & COPING for all cross sectional area at S.F. Lvl. etc., Twenty Two

complete as directed by E. I. C. Paise

Providing and laying Controlled cement concrete M:25 and Curing

Complete for reinforced concrete Chhajjas up to all floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

23 Cmt. 10.10 7,031.62 Thirty One

cement, 3 Fine sand) to give a smooth and even surface centering

and formwork and curing complete excluding cost of reinforcement. Two Paise

etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

24 Cmt. 28.90 7,029.50 Twenty Nine

excluding the cost of reinforcement for RCC work in SLAB BEAMS for

Ground floor & Super structure, & for any type of cross sectional Paise

area. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

25 Cmt 19.80 7,070.81 Seventy

excluding the cost of reinforcement for RCC work in SLAB BEAMS at

First Floor & for any type of cross sectional area. etc., complete as One Paise

directed by E. I. C.

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and laying controlled cement concrete M:25 and curing Seven

complete including cost of necessary, form work, compacting with Thousand One

vibrator curing centering & shuttering in true line and level etc, but Hundred

excluding the cost of reinforcement for RCC work in SLAB BEAMS at Twelve Rupees

Second Floor to Terrace Floor & for any type of cross sectional area. Twenty Two

etc., complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

27 Cmt 13.20 6,781.85 Eighty One

excluding the cost of reinforcement for RCC work in Staircase with

steps / Kadi Tappa, waist slab and landing at any height and level as Five Paise

directed etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

28 Cmt 43.40 6,809.93 Nine Rupees

excluding the cost of reinforcement for RCC work at Plinth to Ground

FLOOR SLAB for all thickness/cross section etc. complete as directed Paise

Providing and laying controlled cement concrete M:25 and curing Six Thousand

complete including cost of necessary, form work, compacting with Eight Hundred

29 vibrator curing centering & shuttering in true line and level etc, but Cmt 33.40 6,851.34 Fifty One

excluding the cost of reinforcement for RCC work at FIRST FLOOR Rupees Thirty

SLAB for all thickness/cross section etc. as directed by E. I. C. Four Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

30 Cmt 9.90 6,892.64 Ninety Two

excluding the cost of reinforcement for RCC work in SECOND FLOOR

SLAB for all thickness/cross section etc. complete as directed by E. I. Four Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including Seventy Seven

31 bending, binding and placing in position complete upto ground floor Kg 34195.00 77.29 Rupees Twenty

level Nine Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including Seventy Eight

32 bending, binding and placing in position complete upto First floor Kg 10883.00 78.34 Rupees Thirty

level Four Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including Seventy Nine

33 bending, binding and placing in position complete for Second floor to Kg 3813.00 79.39 Rupees Thirty

terrace floor Lvl. Nine Paise

Brick work using common burnt clay building bricks having crushing Two Hundred

34 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cmt 43.70 4,214.33 Fourteen

Cement Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional Rupees Thirty

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement

35 Cmt 55.40 4,496.05 Ninety Six

Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Ground Floor

etc. Complete. Paise

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at First floor Lvl. in cement

36 Cmt 45.30 4,538.48 Thirty Eight

Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For First Floor

etc. Complete. Eight Paise

Brick work using common burnt clay building bricks having crushing Four Thousand

strength not less than 35 kg./Sq.Cm. at Second floor to terrace floor Five Hundred

37 Lvl. in cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional Cmt 26.40 4,580.91 Eighty Rupees

For above First Floor to Terrace Floor etc. Complete, as per detailed & Ninety One

directed by EIC. Paise

Half brick masonry in common brunt clay building bricks having Six Hundred

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Eighty Four

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Rupees Twenty

Ground Floor level.(B) Conventional Six Paise

Half brick masonry in common brunt clay building bricks having Six Hundred

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Ninety Rupees

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at First Fifty Seven

to Terrace Floor Lvl.(B) Conventional Paise

Half brick masonry in common brunt clay building bricks having Six Hundred

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Ninety Six

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Rupees Eighty

Terrace Floor Lvl.(B) Conventional Seven Paise

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any

41 height with all labour & material, etc. Complete, as per detailed & Smt 223.30 326.13

directed by EIC. Thirteen Paise

Providing 15mm thick cement plaster in single coat on Rough One Hundred

(Similar)side of single or half brick walls for interior plastering for Sixty Rupees

Ground floor level and finished even and smooth in (ii) Cement Eighty Five

mortar 1:4 (1-cement :4-sand) Paise

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering for

43 Smt 394.60 184.75 Rupees

First floor level and finished even and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand) Paise

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering at

44 Smt 130.10 208.65 Eight Rupees

Second Floor to Terrace floor level and finished even and smooth in

Sixty Five Paise

(ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 10mm thick cement plaster in single coat on brick/concrete

45 Ceiling for interior plastering for Ground Floor level and finished even Smt 293.30 148.00

and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing 10mm thick cement plaster in single coat on brick/concrete

46 Ceiling for interior plastering for First Floor level and finished even Smt 266.60 171.89

and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) Nine Paise

Providing 10mm thick cement plaster in single coat on brick/concrete

Ceiling for interior plastering at Second Floor to terrace floor Lvl. and

47 Smt 51.20 195.79 Rupees

finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4-

Providing and applying ready mix concrete plaster on RCC elements

to give expose finish including 2mm thick base coat of same material One Thousand

48 and 3mm thick top coat of concrete platser of approved shade and Smt 456.60 1,016.12 Sixteen Rupees

brand. Job includes proper griding of RCC joints before applying Twelve Paise

plaster complete with scafolding directed as per Architect and EIC

Providing 20mm thick double coat external cement plaster on brick/

concrete work for plastering comprising of base coat of 12mm thick Two Hundred

cement plaster in cement mortar (1 Cement:4 coarse sand) in rough Eighty Three

finishing and 8mm thick top coat of cement mortar 1:2 (1 Cement: 2 Rupees Ninety

Coarse sand) finished rough / with Trovel including scaffolding curing Five Paise

Washed stone grit plaster on exterior walls height upto 10 metre

above ground level, in two layers, under layer 12 mm cement plaster

1:4 (1 cement : 4 coarse sand ), furrowing the under layer with

scratching tool, applying cement slurry on the under layer @ 2 Kg of Nine Hundred

cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2(1 Ninety Five

cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in Rupees Thirty

panels with groove all around as per approved pattern, including Paise

scrubbing and washing the top layer with brushes and water to

expose the stone chippings ,complete as per specification and

direction of Engineer-in-charge

Add for plaster groove in plastered surface or moulding to R.C.C.

51 Rmt 551.90 43.05 Rupees Five

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) One Thousand

or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed Eighteen

with grey cement slurry mixed with pigment to match the shade of Rupees Ninety

slab including rubbing and polishing etc. complete. (A) Two Paise

Providing and laying polished kota stone slab 25mm thick in risers of One Thousand

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 One Hundred

53 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed Smt 41.90 1,144.15 Forty Four

with pigment to match the shade of slab including rubbing Rupees Fifteen

and polishing etc. complete. Paise

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) One Thousand

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface Four Hundred

or fixing on existing flooring by adhesive material including Sixty Seven

dismentaling of existing flooring and jointed with color cement slurry Rupees

including finised with flush pointing & cleaning the surface etc. Seventy Two

complete for antiskit. Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" One Thousand

or as specified in skirting risers of steps and dedo on 10mm thick. One Hundred

55 cement plaster 1:3 (1-cement: 3-coarse sand) and jointed with white Smt 250.90 1,195.02 Ninety Five

cement slurry as per the detailed by Architect & direction of Engineer- Rupees Two

in- Charge. Paise

Providing and laying Ceramic tiles 6mm thick in flooring, treads of

steps and landing laid on a bed of 12mm thick Water proof cement

plaster with mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing

Chemical Agent and cement vata (10cm. x 10 cm. size) quarter round

56 Smt 34.00 1,233.51 Thirty Three

in cement mortar 1:1 including neat cement finishing, watering etc.

complete finishing with flush pointing in white cement. (For UG tank One Paise

Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps One Thousand

and dedo on 10mm thick Water proof cement plaster with mortar 1:3 Two Hundred

57 (1-cement : 3- coarse sand ) & Water Proofing Chemical Agent and Smt 99.00 1,272.55 Seventy Two

finishing with flush pointing in white cement. (For UG Tank walls) Rupees Fifty

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss]

polished at all exposed Surface, Pre-moulded and pre-polished,

machine cut Granite of any colour and shade, & finish, as per detailed

by architect / Consultantfor flooring, dado skirting, cladding, steps

and risers, kitchen platforms, vanity counters, window sills , fascias Three

and similar locations of required size, approved shade, colour and Thousand Four

58 texture laid over 20 mm thick mortar 1:4 (1 acid proof cement : 4 Smt 159.00 3,400.27 Hundred

coarse sand). And In dado/skirting on In dado/skirting on 12 mm Rupees Twenty

thick mortar 1:4 (1 acid proof cement : 4 coarse sand), joints treated Seven Paise

with white cement, mixed with matching pigment, epoxy touch ups,

including Spacer tape 6.4 mm thick x 4 TO 6 mm as per detailed

groove, rubbing, curing, moulding and polishing to edges to give high

gloss finish as per concept etc. complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm One Thousand

(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse Eighty Rupees

sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry Sixty Eight

including rubbing and polishing etc. complete. (B) 30mm thick. Paise

Providing and fixing sandwich type platform including supplying and

fixing granite stone 18 mm thick mirror polished stones in top and Seven

side position and vertical strip at front over 25 mm thick polished

60 kota stone platform fixing in top and sides and intermediates Smt 3.00 7,478.49

supports fixing with cement mortar and adhesive and finishing Rupees Forty

including making recess for Kitchen/ Laboratory sink etc. complete as Nine Paise

approved and directed by Consultant / EIC.

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

61 creme out upto surface using white cement including rounding off Smt 275.30 779.70

junctions and extending them upto 15 cm along the wall,clearing with Seventy Paise

water and oxalic acid etc. as directed. (The Product performance shall

carry Guarantee for 10 years)

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and laying cement concrete flooring 1:2:4 (1-cement:2- Three Hundred

coarsesand: 4-graded stone aggregate 20mm nominal size) laid in one Thirty Nine

layer and finished with a floating coat of neat cement. (B) 50mm Rupees Eight

Providing wood work in frames of Size 12.5 x 10 Cm. for doors,

windows, clerestory windows and other frames, wrought framed and

fixed in position with hold fast lugs or with dash fasteners of required

dia & length Incl. Providing and fixing 35 mm thick (or as specified)

ISI marked flush door shutters conforming to IS : 2202 (Part I)

decorative type, core of block board construction with frame of 1st

class hard wood, with 1mm. thk, ISI marked designed laminate in any

63 Smt 41.20 6,771.29 Seventy One

finish on both faces of shutters., slit openings with bidding Patti &

6mm thk designed acid wash glass,. Stainless Steel butt hinges Nine Paise

[125x65x2.5mm. IS1281712] with necessary screws, using branded

S.S. matt /glossy / platinum finished accessories, Colour / polishing

all bidding parts, and also incl. with all Material, labour, tools,

tolerance, scaffolding etc. complete as per concept /direction and

approved by Architect, and directed by Engineer-In-Charge.

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections

(JINDAL-DOMAL Series OR Equivalent), hI-perfomance Sliding/

Openable window/door with Required thick toughened designer glass

of Saint Gobain or equielent, is used for Aluminum Hi-Profile Section

with necessary accessories and with additional shutter with Stainless

Steel Mosquito net. [In Opening Position always one of Mosquito net

shouter should be in Close Position], captive bead, extremely difficult Seven

to remove once glazed, high performance weather stripping, internal Thousand

wedge gasket, Bottom, side and top section including necessary filling Seven Hundred

up the gaps at junctions, with required EPDM rubber/ etc. and ISI Forty Two

ebco make,"Lx. Premium" Required Finish door fixture Accessories As Rupees Sixty

per Architect Concept, High security interlocking bead, Sheet One Paise

membrane flashing , 2" over jamb flashing, New Blocking with new

backer rod and sealant, channel glide with runner, slide fold hinge

when ever need of sufficient capacity, with warranty, all types of

material, labour, transportation, tools tolerance and matching

required level with Flooring etc. complete as per Architect concept

and as per detailed by Architect / consultant & Directed by EIC.

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

65 Smt 4.50 1,175.56 Seventy Five

alluminium frame for ventilation with 5 mm thick frosted glass as

Rupees Fifty Six

details etc complete for Ventilation Paise

Providing and fixing hydraulic door closer of approved size and make Thirty Nine

as directed engineer in charge. all lift, level and leads. Rupees Eleven

Providing & Fixing M.S. grills of required pattern to wooden frames of

windows, RCC or as specified in drawings etc. with M.S. flats at One Hundred

67 required spacing & frame around, square or round bars with round Kg 3295.00 109.08 Nine Rupees

headed bolts & nuts or by screws (A) Plain Grill, as per detailed & Eight Paise

directed by EIC.

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing, supplying, fixing, fabricating, erecting, aligning the

structural steel like pivot ,tubular 'T', 'I" section, angle, plate, beam,

channel section, Bar , hollow box or Z purloins, Round or Square

Pipes, of approved make, for built up purloins, roof trusses, columns,

side runners, tie beams, sag rods, base plates gusset plates, cap

plates, bearing bracing, gantry girders, rails, require support, pipes,

including all welded or bolted steel structures of various types with

approved I.S.I. mark electrodes, bolts, anchor bolts including cost of One Hundred

thread, Anchor plate cleats etc. in RCC or masonry work, including Thirty One

cutting, bending, welding ,fixing, supplying , Fabricating Decorative Rupees Eighty

fevisted section or any structured member required to complete the Three Paise

job for Bridge, Trusses, Canopy, doors, Frame, Railing, Entrance gate,

pergola, Decorative hanging light , New window, parking shed or

space frame or any other required specified area as shown on

drawing and detailed specification or as per design incl. three coats of

approved brand primer and two coats of paints, necessary

scaffolding, tools tolerance etc. complete as directed by Engineer In

Charge. (payment will be made for weight of metal used in the work)

Finishing wall with Weather proof exterior emulsion paint on wall One Hundred

surface (two coats) to give an required shape even shade after Twenty Rupees

thoroughly brushing the surface to remove all dirt, and remains of Twenty Six

loose powdered materials.etc complete. Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats

of primer at Wall painting (two coats) with plastic emulsion paint of One Hundred

approved brand & manufacture on undecorated wall surfaces to give Twenty Four

an even shade including thoroughly brushing the surface free from Rupees Ninety

mortar droppings & other foreign matter & sand papered smooth, as Six Paise

per detailed & directed by EIC.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats

of primer at Ceiling painting (Two coats) with plastic emulsion paint One Hundred

of approved brand and manufacture on undecorated Ceiling surface Thirty Rupees

to give an even shade including thoroughly brushing the surface free Forty Eight

from mortar droppings and other foreign matter and sand papered Paise

smooth, as per detailed & directed by EIC.

Painting two coats (including priming coat) on new steel and other One Hundred

metal surface with enamel paint, brushing, interior to give an even Twenty Eight

shade including cleaning the surface an even shade including cleanicn Rupees Sixty

the surface of all dirt, dust and other foreign matter. Two Paise

Providing and fixing roof panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on Eight Hundred

both side of the sheet and polyester top coat 15-18 micron. The PPGI Sixty Seven

Sheet shall have plastic protective guard film of minimum 25 microns Rupees Thirty

to avoid scratches during transportation. The ridge shall be fixed to Nine Paise

the steel members by pop rivet or self drilling/self stitching fastners

@ maximum 450 mm c/c along length of capping/flashing etc

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-

304 grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos.

16mm dia SS pipe of 16 gauge, round balustrade of 32mm [50mm

16G Grade 304 with glossy finish consisting of 32 NB or nearest size

vertical posts 900 Height at maximum spacing 900c/c with suitable

cups at bottom and top rail of 50 NB or nearest size & intermediate Three

rails of 16 NB or nearest size etc complete] with complete assembly

74 of SS studs to house the horizontal 16mm pipes and top handrail, Rmt 51.80 3,646.91

bend and coupler to be used as per architectural detail drawings for Ninety One

the railing in parapet, stair etc. including fabricating, hoisting, fixing in Paise

position with angle cleats, holdfast etc. in RCC or masonry in true line

level and plumb, including complete assembly, including matt

polishing and buffing complete, including scaffolding etc. complete as

directed by EIC.(Actual length of stair railing shall be measured at site

& same shall be paid. No wastage should be measured or paid.)

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-

304 grade using 50mm dia Stainless Steel pipe of 16 gauge, [top rail

of 50 NB or nearest size complete] with complete assembly, bend and

coupler to be used as per architectural detail drawings for the railing One Thousand

in parapet, stair etc. including fabricating, hoisting, fixing in position Three Hundred

with angle cleats, holdfast etc. in RCC or masonry in true line level Fifty Six Rupees

and plumb, including complete assembly, including matt polishing Eighteen Paise

and buffing complete, including scaffolding etc. complete as directed

by EIC.(Actual length of stair railing shall be measured at site & same

shall be paid. No wastage should be measured or paid.)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic

Grade Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x

6mm. Descaling and degreasing the board as per requirement using

epoxy reflactive process by screen painting as directed etc. complete Seven

including transporting and fixing in C.C. 1:2:4 with necessary Thousand Six

76 excavation curing etc. complete as per I.R.C. 67-2012 design. A Smt. 4.50 7,610.66 Hundred Ten

warranty for 7 years for the Retro reflective sheeting from original Rupees Sixty

manufacturer & a certified copy of 3 year outdoor exposure test Six Paise

report from third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-4(MDR/ODR) retro

reflective sheeting

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane over uniform surface of slab. Apply 2 coats at

dosage of 1.5 kgs per sq.m to achieve the required minimum DFT

of 1.5mm. It should have following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ± 0.1 Nine Hundred

3. Elongation % ≥ 700% Seventy Nine

4. Dosage 1.2 - 1.5 kg/m2 in two coats Rupees

5. Tack Free Time 24 - 48 hrs Fourteen Paise

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

(The Product performance shall carry Guarantee for 10 years)

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic Seven Hundred

compressed / vibrated mechanically and as per approved design Six Rupees

Confirming to IS 15658 : 2006 including 35 mm Sand layer for Ninety Three

levelling and filling the joint with sand in proper line and level as per Paise

guidlines of IRC SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length, 30cm height and 15cm thick of Four Hundred

79 M200 grade concret as per approved design and including excavation Rmt 100.00 400.87 Rupees Eighty

for fixing in proper line and level, filling the joint with C:M 1:3 (1 Seven Paise

cement:3 fine sand) etc complete.

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: M-20 Cement

Concrete laid in required slope at concrete floor as directed and

specified using necessary steel form work with M.S. Channels

including forming construction & contraction joints 4 mm to 6mm

wide by cutting the floor up to ¼ th depth of thickness of the Seven

concrete depth using mechanical saw and sealing the joint with poly Thousand

sulphide sealant up to full depth of cutting including providing & Three Hundred

fixing M.S. dowels bars with bitumen painted of full length as shown Seventeen

in drawing as to form the bays not exceeding 6.0 m X 4.5 m etc. Rupees Sixty

complete as per directed by Architect or Engineer-In-Charge. For all Paise

level and leads.(a) For RCC Road Note: Rates are Incl. cost of Cement

Concrete Pavement shall be 150mm. Thk. or as detailed and rolling

times as per mentioned above and also all tools tolerance, shuttering,

channel, etc. complete as per detailed & Directed by Architect & EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C.

SWR type B pipe confirming to IS 13592-1992 with one end plain &

other end socket with rubbering & Fixing conforming to ISI 14735-

1999 of approved make for drain system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on

81 wall using PVC clamps of the size 160mm dia x 210mm length x Rmt. 57.50 876.90

196mm high at every 2000mm centre to centre or shall be concealed Paise

in wall as directed necessary fittings such as bends, shoes, etc. incl.

testing of pipe & joint & jointed with adhesive solvent, cement incl.

cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM Thousand Two

82 as per IS 9079 at departmental stores with following MOC: Casing: CI- Nos 1.00 24,240.00 Hundred Forty

FG260, Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m head Rupees Zero

Control panel- DOL / Star Delta starter suitable for local & remote Six Thousand

pump control application consisting of MPCB, overload relay and Nine Hundred

83 contactors as per Type II coordination including digital voltmeter, Nos 1.00 6,993.24 Ninety Three

analogue ammeter with selector switch, run hour meter, required Rupees Twenty

protective relays & control accessories. Four Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing laying and jointing in true line and level 75mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

84 clamp at every two metre C/C or shall be concealed as directed Rmt. 90.00 280.23

including necessary fittings etc. including testing of pipe and joints Paise

and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of Seventy Two

85 clamp at every two metre C/C or shall be concealed as directed Rmt. 37.50 72.65 Rupees Sixty

including necessary fittings etc. including testing of pipe and joints Five Paise

and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of Ninety One

86 clamp at every two metre C/C or shall be concealed as directed Rmt. 41.00 91.84 Rupees Eighty

including necessary fittings etc. including testing of pipe and joints Four Paise

and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

87 clamp at every two metre C/C or shall be concealed as directed Rmt. 56.00 148.12

including necessary fittings etc. including testing of pipe and joints Paise

and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

88 clamp at every two metre C/C or shall be concealed as directed Rmt. 61.00 195.67

including necessary fittings etc. including testing of pipe and joints Seven Paise

and fixing the same with adhesive solvent, including cost of all

Providing & Fixing gun metal check or no return full way wheel valve Twenty Rupees

etc. complete as per the instruction of EIC. (C) 25 mm. Dia Sixty Three

Providing & Fixing gun metal check or no return full way wheel valve Sixty Three

etc. complete as per the instruction of EIC. (E) 40 mm. Dia Rupees Forty

Providing and fixing screw down bib taps of following size.(A) Brass Fourteen

screw down bib tap polished bright. (i) 15mm dia. Rupees Eighty

92 Providing and fixing brass screw down stop tap.(B) 20mm dia. Each 7.00 223.81

Providing erecting and fixing double coated ISI water tank of required Three Rupees

93 capacity each with all necessary fittings and connection etc. complete Liter 8000.00 3.95 Ninety Five

on terrace Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm

diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of the

94 following nominal diameter of self cleansing design with C.I screed Each 14.00 586.27

down or hinged grating including the cost of cutting & making good Seven Paise

the walls, as per detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

95 Each 8.00 1,292.19 Ninety Two

size (inside) with standard weight.(i) Square mouth traps. (A)

100mm x 100mm size P type. Nineteen Paise

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm internal dimensions, total weight of cover with frame to be Two Thousand

not less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) Nine Hundred

96 (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse sand :4-graded Each 6.00 2,932.93 Thirty Two

stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster Rupees Ninety

15mm thick with cement mortar 1:3 finished smooth with a floating Three Paise

coat of neat cement on walls & bed concrete for (i) Inside dimensions

455mmx 610mm & 450mm deep for single pipe line. etc. complete

as per detailed, directed & approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

1 cement : 2 coarse sand :4 grade stone aggregate 20mm size )

foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats

40 mm size ) inside plaster 15mm thick with CM 1:5 ( 1 cement :

Coarse sand ) finished with a floating coat of neat cement & making Nineteen

channels in cement 1:2:4 mix ( 1 cement : 2 coarse sand :4 stone Thousand

aggregate 20mm nominal size ) finished smooth complete including Three Hundred

curing & testing… ( I ) inside 900mm x 1200 mm & 1.5 m deep Forty Nine

including R.c.c. cover with frame size 560 mm diameter ( A ) with Rupees Sixty

230mm thick walls of brick masonry using brick having crushing Three Paise

strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse

sand ), (2) B type depth 1.50 Meter for 150mm diameter sewer.. etc.

complete as per detailed, directed & approved by the consultant /

Providing Septic Tank of 5.00 mt x 3.00 mt x2.00 mt size for Sewerage

including excavation with any strata up to four meter depth,PCC in One Lakh

Bottom Slab 1:3:6,Brick Work in cement mortar 1:5, RCC M200 Slab Thirty Six

98 on Top And bottom, required filling for Tank including making Each 1.00 1,36,015.69 Thousand

Required line for water inlet, precast RCC M.200 Frame & cover Fifteen Rupees

etc.as directed by engineer in charge. etc complete, septic tank as per Sixty Nine Paise

detailed drawing.

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing & Laying & jointing in true line level U.P.V.C. SWR type B

pipe confirming to IS 13592-1992 with one end plain & other end

socket with rubbering & Fixing conforming to ISI 14735-1999 of

approved make for drain system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using Eight Hundred

PVC clamps of the size 160mm dia x 210mm length x 196mm high at Thirty Four

every 2000mm centre to centre or shall be concealed in wall as Rupees Thirty

directed necessary fittings such as bends, shoes, etc. incl. testing of Eight Paise

pipe & joint & jointed with adhesive solvent, cement incl. cost of all

material etc. complete as per detailed, directed & approved by the

consultant / EIC. (A) 160mm dia. etc. complete as per detailed,

directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete Six Hundred

Light duty non-pressure pipes I.S. class NP2 of the following internal Seventy Eight

diameter with collars and butt ends prepared for collar joints Rupees Two

including testing of joints complete.(D) 300mm Paise

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal

clear dimention including the cost of excavation, P.C.C. 1:4:8 and

filling brickbats with dry masonry work, Honeycomb masonary work,

101 M:20 RCC. SLab incl. form work including FE-500 Reinforcemnt, Each 1.00 35,009.63

M.S.cover, C.I. Pipe & cowl vent, vatas in C.M. 1:3 with finishing Three Paise

curing etc. complete as directed.. etc. complete as per detailed,

directed & approved by the consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter

wash basin with single hole for pillar type with Cl or MS brackets

painted white including cutting holes, ranking bolts for Fixing &

marking good the same, including Fixing C.P. Brass waste coupling Two Thousand

32mm dia & Bottal trap & 15mm dia pillar tap, Bottle Trap, as Eight Hundred

approved, capstan head C.P. screwed down high pressure with screw Thirty Nine

shank & back nuts & rubber plugs, 15mm dia brass stop cock Rupees

(50/75mm p.v.c. Drain connection pipe, Water Connection Pipe of Seventy Seven

required Size, & testing the same for leak proof, etc. with all material Paise

& labours to complete this job in all respected manners, etc.

complete as per detailed & approved by the consultant & directed by

Providing and fixing wash down water closet (European type,Wall

hung W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with Seven

plastic seat and cover for wash down water closer with C.P. brass Thousand One

hinges, C.P. brass toilet paper holder, Jet Spray, Metropole flush valve Rupees Sixty

Incl. Connection and rubber buffers. (A) Vitreous China., etc. Two Paise

complete as per detailed & approved by the consultant & directed by

Providing and fixing water closet squatting Pan including trap and

foot rest (Indian type W.C. Pan) size 580mm (Earthwork, bed

104 Each 1.00 1,439.67 Thirty Nine

concrete to be measured and paid for separately) (A) Vitreous

China.(I) Long pattern = White colour Seven Paise

Providing and fixing Urinal or approved quality including conecting

105 the Urinal with waste pipe , tap etc. complete.(A) White earthenware Each 3.00 1,074.86

flat back or corner type size 430mm x 260mm x 350mm. Six Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing & Fixing C.P. brass towel rail Approved Make complete with

C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws,, etc. Six Hundred

complete as per detailed, directed & approved by the consultant / Sixteen Rupees

EIC. (B) 600mm x 20 mm size, etc. with all material & labours to Forty Two

complete this job in all respected manners, etc. complete as per Paise

detailed & approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to Eight Hundred

wooden plugs with C.P. brass screws & washers, etc. with all material Fifty Nine

& labours to complete this job in all respected manners, etc. Rupees Forty

complete as per detailed & approved by the consultant & directed by One Paise

Providing & Fixing handicap toilet set with Wall-mounted European

Closet & wash basin & all handicap requirement with dual flush tank,

seat & lead (heavy duty) including C.I. Brackets, C.P. brass hinges,

M.S. / C.I. painted brackets, Waste Coupling, 32mm size bottle trap

etc. all Internal fittings complete with grab rails, swin type grab bar Forty Thousand

etc. rubber buffers, C.P nuts, bolts etc making holes in walls & floors, Four Hundred

108 & finishing for ready to use. The rate includes all necessary Each 1.00 40,425.96 Twenty Five

connection charges as per product detail to the satisfaction of Rupees Ninety

Architect / engr. in-charge where required & the final handing over Six Paise

etc. complete as per specifications, drawings & as directed by the

Engineer-in-charge. The scope includes Providing and fixing all the

necessary fittings of approved brand and as per directed by

Providing & Fixing pillar tap, screw down high pressure with screws, Eight Rupees

shanks & back nuts. (i) 15mm dia. Seventy Three

110 Providing & Fixing brass screw down stop tap. (A) 15mm dia. Each 6.00 205.83

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. Three Hundred

111 brackets, painted white including cutting holes in walls and making Each 0.00 2,326.66 Twenty Six

good the same but excluding fittings. Rupees Sixty

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling

112 Each 10.00 707.00 Seven Rupees

Piping Work as Per Directed By Engineer In Charge

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing One Thousand

drain pipe etc. and repairing the hole after insertion of drain pipe etc. One Hundred

113 with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded Each 20.00 1,161.50 Sixty One

stone aggregate 20 mm nominal size), including finishing complete so Rupees Fifty

as to make it leak proof. Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and laying Precast Lightweight concrete hollow core wall

with hollow core concrete unit of approved make & size of 120 mm

thick, 600 mm wide and 2400 mm / 2600 mm / 2850 mm / 3000 mm

114 / 3300 mm in legth made from of controlled cement concrete M20 Smt 215.00 850.42

having cube compressive strength not less than 20 MPa jointing with Paise

high strength & tensile adhesion non-shrink cementitious joint

compound / P.U. Foam. (Plaster not required)

Point wiring in Copper (Modular) Point wiring for Light / Bell with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell push & Four Hundred

accessories and earth continuity of following type, erected on PVC / Eighty Five

Metallic box, single mounting base frame covered with Rupees Eighty

textured/metallic front plate modules erected on / in wall / ceiling as One Paise

per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with

116 accessories erected on Metal / PVC box covered with 3 mm thick Pt. 78.00 167.66

PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with Six Paise

necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as

Mains for Secondary Point. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan Six Hundred

regulator with separately mounted and accessories with earth Seventy Four

continuity of following type erected on PVC / Metallic box, single Rupees Sixty

mounting base frame covered with textured/metallic front plate Eight Paise

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

118 Pt. 40.00 510.05 Ten Rupees

appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular Seven Hundred

type switch & 5 pin Plug erected on PVC / Metallic box covered with Forty Five

appropriate front plate modules erected on / in wall / ceiling as per Rupees Thirty

pipe erected with following type of accessories. Eight Paise

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (FRLS) CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

120 Pt. 6.00 915.06 Fifteen Rupees

appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (FRLS) CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic box, single mounting base frame Two Hundred

covered with textured / metallic front plate modules erected on / in Fifty Seven

wall / ceiling with following type accessories. Rupees Fifty

Single mounting base-frame & Textured / Metallic front plates. Five Paise

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling ,complete

with 6A Modular type switches and following type of accessories

122 erected on PVC / Metallic box, single mounting base frame covered Pt. 6.00 603.98

with textured / metallic front plate modules erected on / in wall / Paise

ceiling as per pipe erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with

pvc / metallic box, single mounting base frame covered with textured Twenty Five

123 / metallic front plate , modules erected with necessary connection. Ea. 20.00 25.25 Rupees Twenty

As desired by Engineer In charge Five Paise

(7) Blank Plate Single Cat-III

124 Decorative call bell Ting-tong box type 250 volts complete erected Ea. 1.00 71.71

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with

125 Ea. 11.00 160.59 Sixty Rupees

necessary connections as per site situation directed by Engineer In

Fifty Nine Paise

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected Thirty Three

126 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr. 500.00 33.33 Rupees Thirty

solution & Clamps with following dia of pipes, in approved manner as Three Paise

directed b) 25 mm

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected Sixty Seven

127 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr. 40.00 67.67 Rupees Sixty

solution & Clamps with following dia of pipes, in approved manner as Seven Paise

directed d) 40 mm

Providing & erecting PVC Corrugated Flexible Conduit with required Twenty One

128 nos. of coupling, PVC bushes, Check-nuts etc. complete of following Mtr. 200.00 21.21 Rupees Twenty

sizes. (2) 25 mm One Paise

(A) Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free &

129 Mtr. 70.00 277.75 Rupees

flame proof confirming BS .All necessary accessories and measuring

of following sizes. (1) 75 mm x 50 mm trunking Paise

(A) Supplying and laying UPVC cable trunking system comprising One Hundred

unplasticised polyvinyl, chloride rigid material with ignition free & Eighty Eight

flame proof confirming BS .All necessary accessories and measuring Rupees Eighty

of following sizes. (3) 50 mm x 50 mm trunking Seven Paise

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

131 Mtr. 600.00 62.62 Rupees Sixty

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (general wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper Eighty Two

132 conductor FRLS PVC insulated stranded wire of green colour for earth Mtr. 1200.00 82.82 Rupees Eighty

continuity of following size (general wiring + in street light) Two Paise

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

133 Mtr. 250.00 112.11 Twelve Rupees

stranded wire of green colour for earth continuity of following size

(FRLS) (a) with medium class Rigid PVC pipe and accessories (a) 2 wire

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

134 necessary clamps or in existing trench / pipe of following size of Mtr. 10.00 284.82

cables Two Paise

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Two Hundred

multistrand Copper conductor for 1.1 KV. to be laid on wall with Eighty Seven

necessary clamps or in existing trench / pipe at road crossing or Rupees Eighty

floor of following size of cable. (B) 3 core 4 Sq. mm Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Three Hundred

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall Sixty Four

with necessary clamps or in existing trench / pipe at road crossing or Rupees Sixty

floor of following size of cables. (B) 4 core 4 Sq. mm One Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall

137 Mtr. 300.00 510.05 Ten Rupees

with necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Six Hundred

multistrand Copper conductor for 1.1 KV. to be laid on wall with Seventy Six

necessary clamps or in existing trench / pipe at road crossing or Rupees

floor of following size of cables. (A) 4 core 10 Sq. mm Seventy Paise

Supplying and erecting Flexible PVC insulated multi strand multi core Forty Six

139 1.1 kv grade ISI marked copper wires of following size to be erected Mtr. 250.00 46.46 Rupees Forty

as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed Six Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

140 Ea. 8.00 33.33 Rupees Thirty

going tails, insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

141 Ea. 6.00 38.38 Rupees Thirty

going tails, insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

142 Ea. 4.00 38.38 Rupees Thirty

going tails, insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass double Seventy Five

compression type cable gland with rubber ring for PVC insulated Rupees

armoured cable complete with out going tails, insulating tape etc for Seventy Five

following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm Paise

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool & Fifteen Rupees

connected to switchgear terminals with brass/cadmium plated nut Fifteen Paise

bolts in an approved manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool & Twenty Rupees

connected to switchgear terminals with brass/cadmium plated nut Twenty Paise

bolts in an approved manner. (D) 35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & Eight Rupees

connected to switchgear terminals with brass/cadmium plated nut Eight Paise

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & Ten Rupees

connected to switchgear terminals with brass/cadmium plated nut Ten Paise

bolts in an approved manner. (B) 10 Sq.mm

Making trench in soft soil of suitable width of 90 cms deep for laying Fifty Five

148 cable or locating the fault all over the run and backfilling the same Mtr. 200.00 55.55 Rupees Fifty

and making the surface as normal ground. Five Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying

149 Mtr. 160.00 62.62 Rupees Sixty

of cable. below ground / road surface for enclosing cable and back

filling the same to make ground as per original. (A)50 mm dia

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying

150 Mtr. 180.00 95.95 Rupees Ninety

of cable. below ground / road surface for enclosing cable and back

filling the same to make ground as per original. (C)90 mm dia

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with Fixed thermal &

151 Ea. 1.00 6,173.12 Seventy Three

magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in Paise

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking

152 Ea. 93.00 112.11 Twelve Rupees

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark - Cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

153 Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Ea. 4.00 668.62

in existing box having following capacity (b)40 Amp. Cat.III Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive Five Hundred

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Eighty Seven

in existing box having following capacity (a) 6 to 32 Amp. Rupees Eighty

Cat.III Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive Six Hundred

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Forty Seven

in existing box having following capacity (b)40 Amp. Rupees Forty

Cat.III One Paise

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth One Thousand

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without One Hundred

156 MCB to house appropriate nos. of MCBs.(The DBs should be used of Ea. 2.00 1,152.41 Fifty Two

same company of MCB to be used) suitable for (A) single phase Rupees Forty

incoming and horizontal single phase outgoing (b) sheet steel double One Paise

door (IP-43) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth Two Thousand

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without Nine Hundred

157 MCB to house appropriate nos. of MCBs.(The DBs should be used of Ea. 4.00 2,913.85 Thirteen

same company of MCB to be used) suitable for (B) three phase Rupees Eighty

incoming and single phase horizontal type outgoing Per phase Five Paise

isolation type (PPI) (b) sheet steel double door (ii)6 way

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54

158 Ea. 1.00 18,663.60 Hundred Sixty

suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three

phase outgoing as per following .(The DBs should be used of same Sixty Paise

company of MCB to be used)

(D)12 way outgoing

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

159 Ea. 10.00 1,969.50 Sixty Nine

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for Paise

following Max. rating erected as directed (i) 25 Amps.DP Cat. III

Supplying & erecting approved make IP 55 grade Company fabricated

Timer Panel of following capacity for switch On-Off street lights on Twelve

time scheduling basis made from 16G CRCA sheet duly epoxy power

painted inside and outside with hinged doors and locking

160 Ea. 1.00 12,399.77 Ninety Nine

arrangement consisting of suitable size of 4 Pole MCB and 4 pole

contactor (cat-III)with analog time switch, auto manual switch of Seventy Seven

same make and suitable input and output Bakelite terminals and Paise

with door earthing approved by Engineer in charge.(A) 32 Amp

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

161 Ea. 6.00 2,235.13 Thirty Five

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for Thirteen Paise

following Max. rating erected as directed (ii) 40Amps. DP Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%, Two Hundred

CCT 3000 K to 6500K, Ninety Five

Luminaire efficacy> 85 lumens/watt ,LED Rupees Ninety

LED driver efficiency > 85 % Three Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted

body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

163 Nos. 11.00 220.18 Twenty Rupees

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (i) 9 watts,Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted

body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, Four Hundred

CCT 3000 K to 6500K, Twenty Seven

Luminaire efficacy> 85 lumens/watt , Rupees Twenty

LED driver efficiency > 85 % Three Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (ii) 11 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted

body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, Seven Hundred

CCT 3000 K to 6500K, Fifty Eight

Luminaire efficacy> 85 lumens/watt , Rupees Fifty

LED driver efficiency > 85 % One Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (iv) 24 watts, Surge-2 KV Cat-lll

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or Two Thousand

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, Two Hundred

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 One Rupees

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 Eighty Paise

& LM-80 certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iii) 36 watts Cat-lll

Providing and erecting PVC body surface or pendent mounting LED

Bulk type 9 watt Lighting Fitting with electronic driver. And lumen

167 output from luminaire 720lm , input voltage range 90-300VAC , 50Hz Nos. 5.00 787.80

cool white(3000 to 6500k), inbuilt driver, -20degC to +60degC Paise

working temperature, AL frame with Beam Angle 120deg

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm Thousand Two

O.D 4 mtr. Long duly painted with two coats of aluminium paint Hundred

complete with metallic base plate of 300 mm x 300 mm x 4mm thick Twenty Five

for using as a compound light pole with approx. weight 32 Kg. Rupees Ninety

Providing and erecting street light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable B

Class M.S. sleeve tubing of approx. 45cms.length and suitable for

mm / 80mm. / require size pole top having sufficient fasteners for

169 fixing the brackets and having spread of 1 mtr. length with suitable Nos. 10.00 561.56

Rupees Fifty Six

rise as per site condition & suitable welded stiffener reducer and Paise

nipple with check nut complete painted with one coat of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm bracket 1 Mtr

Providing & erecting approved make street light / wall mounting

junction box compression moulded from SMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in /

170 Nos. 10.00 616.10 Sixteen Rupees

loop out in built terminal suitable for four core cable, waterproof of

I.P. 54 protected with clamp or bolt nut & earth bolt of following size.

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm. Eight Hundred

171 Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm Nos. 10.00 809.01 Nine Rupees

dia x 45 cm) high upper ground level with necessary curing and One Paise

finishing in approved manner. ( for 4 & 6 mtr pole)

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete having 3blades with aluminium

blades with , canopy & 30 cm. down rod erected with earthing.(Make

172 Nos. 33.00 2,056.36 Fifty Six Rupees

shall be approved by Engineer in charge) including Supplying and

Thirty Six Paise

erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with proper insulation without

leakage and earthing.

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

173 Nos. 33.00 108.07 Eight Rupees

through a 16 Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

174 Nos. 33.00 18.18 Rupees

Supplying & erecting approved make low noise decorative exhaust Three Hundred

175 fan having square frame ABS body with inbuilt lowers & square Nos. 9.00 1,366.53 Sixty Six

frame. 250mm with 1350 RPM Cat.II Rupees Fifty

Providing and erecting required size HOT dipped Galvanised iron strip

176 for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors Kg. 100.00 77.77

etc. using proper clamp. Paise

Providing and erecting required size Copper strip for earthing of H.T.

177 OCB / ACB/ Transformer, LT panel board, Motors etc. using copper Kg. 50.00 794.87

clamp. Seven Paise

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 Rupees

SWG.Using for DB earthing wire 8 to 16 SWG. Seventy Seven

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover (A)(approved make OEM has to submit test Seven

certificate including value of earth resistance of installation duly Thousand

179 stamped and signed by agency and officer Incharge has to ensure the Ea. 2.00 7,095.25 Ninety Five

value of earthing resistane mentioned in test Certificate) & having Rupees Twenty

back filling compound of (B) Inner chemical (CCM Compound)- Five Paise

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted by

Agency. [B] For Electrical installation up to 11 KV located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly Ten Thousand

stamped and signed by agency and officer Incharge has to ensure the Five Hundred

180 value of earthing resistane mentioned in test Certificate) & having Ea. 2.00 10,593.89 Ninety Three

back filling compound of (B) Inner chemical (CCM Compound)- Rupees Eighty

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage Nine Paise

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted by

Agency. [C] For Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA)i.e. independent Earthing

located in other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in

181 RMT 1190.00 47.47 Rupees Forty

existing pipe as per direction. [C] CAT -

Supplying and erecting approved make online Un-interruptible

Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor

182 Nos. 1.00 82,941.20 Hundred Forty

with battery, over/under voltage output with over load & short circuit

protection equipment. The system housed in CRC sheet duly powder Twenty Paise

coated paint with following power backup.with MS painted batteries

stand, 10% Overload capacity for momentary load. (C) 3 KVA with 1Hr

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically sealed

183 Ea. 1.00 49,559.69 Hundred Fifty

compressor, fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with necessary Sixty Nine Paise

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring Twenty Nine

presediment filter GAC filter, carbon filter suitable buster DC pump

184 capacity 80 psi, mention with 40 psi inline type post carbon filter auto Ea. 1.00 29,187.99

low & high pressure switches with following size of storage tank & Ninety Nine

LPH capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing Water proof straight Joint in PVC insulated flat flexible

185 copper cable by using insulating material, water proofing material, & Ea. 10.00 189.88

making the joint complete. (A) Up to 10Sq. mm Eight Paise

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q CPPLUS

MAKE AS PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image Sensor

(0.8758 centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × Four Thousand

1440)@1-25/30 Instastream, H.265, H.264, H.264H, H.264B, MJPEG One Hundred

Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, Fifty Six Rupees

AGC, BLC, HLC, Digital watermarking3.6mm fixed Lens Support Built- Fifteen Paise

in Mic IR Range of 30 Mtr., IP67, PoE complete with rj45 connector

crimping, PVC back box

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image

Sensor (0.9407 Centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/

187 Nos 6.00 8,080.00 Eighty Rupees

MJPEG Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR,

AWB, AGC, BLC, HLC, Digital watermarking3.6mm fixed Lens Support

Built-in Mic IR Range of 50 Mtr., IP67, PoE complete with rj45

connector crimping, PVC back box

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP PLUS

MAKE - 32 Ch. 4K Network Video Recorder AS PER SPECIFICATIONS :

Up to 32 channel IP camera input Max. decoding capability: 8 ×

1080p@30 fps, 2 × 8 MP@30 fps Smart Instastream/H.265/H.264

/MJPEG Max. 160/128/60 Mbps incoming/recording/outgoing

188 Nos 1.00 18,180.00 Hundred Eighty

bandwidth Support 2 SATA HDDs up to 20TB, 2 (1 front USB 2.0 port,

1 rear USB 2.0 port) HDMI / VGA simultaneous video output Support Paise

Multi-brand network cameras ONVIF Version 2.4 conformance

Mobile Software: iCMOB, gCMOB CMS Software: KVMS, KVMS Pro

Supply Installation Testing & Commissioning of 4TB Surveillance Three Hundred

Harddisk Fifty Two

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS

PER SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo gigabit

PoE power budget is up to 250 W, making it ideal for small to Fifteen

medium business surveillance systems. Port Priority is able to Thousand One

190 guarantee the quality of sensitive application like video monitor. PoE Nos 3.00 15,150.00 Hundred Fifty

Auto Recovery automatically reboots your dropped or unresponsive Rupees Zero

PoE-powered devices. Paise

Intelligent power management protects the switch from overload.

QoS ensures smooth traffic for latency sensitive applications. IGMP

Snooping optimizes multimedia traffic delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to

191 Mbps/5 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Nos 2.00 3,030.00

Wi-Fi, VPN - TP-Link Archer C50 AC1200 or equivalent Zero Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

192 SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9 Nos 1.00 23,482.50 Hundred Eighty

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets, Five Hundred

193 mounting trays, exhaust fan complete with accessoreis - 600 X Nos 1.00 9,595.00 Ninety Five

600MM approx. size -- Elirix make Rupees Zero

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker Two Thousand

input Power:8 Watt RMS Power Taps:8/4/2W on 100 V Two Hundred

194 Freq.Responce:60-15,000Hz, SPL (1w/1m):92db,Dim./Wt: ø 227 X Nos 20.00 2,222.00 Twenty Two

H77mm/0.78kg, Model no.CS-6081T Rupees Zero

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having

following specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux., Twenty Two

frequency Response :50-1500HZ I3db, Tone, Controls :Cut & Boost

195 type, LED Meter : 5 LED Arrays, The amplifier suitable to operate Nos 1.00 22,725.00

240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC Rupees Zero

to Battery operation, duly protected by wrong Battery Polarity Paise

Supplying & erecting Mixing Console having channels, Audio mixer

with. Echo facility for live performance, Auditorium & stadiums,

having following features & facilities. (a)input Channels :- Each

channel has separate

6.25mm size balanced phone jack for mike & line for balanced &

unbalanced signals (b)Individual gain control for sating optimum level

for minimum noise (c)BASS, MID & TREBLE ‘ controls Separately for

each input channel (d)ECHO control for each channel (e)PAN control

for echo channel for left or right output (f) AUX Control : To control

level of the channel in final mix to AUX sound output (g)Channel

ON/OFF switch (h)ECHO Section :- ECHO, reverb & Chorus effect can

be added to all input channel by different setting of Delay, Reverb &

Level control (i)Tape section (j)Aux. send & return For sending Pre- Thirty Eight

feeder output of channel for monitoring or adding a special effect Thousand Six

196 unit (k)Mono / Stereo output controls (m) Head phone output for Nos 2.00 38,632.50 Hundred Thirty

monitoring purpose. Two Rupees

Technical specification: Fifty Paise

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC

Output Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42

dB —- 20 K ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB

(e)frequency Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB )

(f)Equalization Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz /

KHz (g) Outputs, Line Output Line Output Low : -10 dB / -2 dBM , Line

Output High : 0 dBM / +17 dBM (775 mv / 5.5 V ) (h) S/N ratio Line

Output Level : > 70 dB (0 dB, 0.775V) The Console shall be mounted

on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer with

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust

resistant sound column with Aluminium case & Aluminium mesh

grille with foam layer under grill, rotary- switch for selecting power

taps / impedance having frequency response 150-20000 Hz with Five Thousand

197 following specifications (b) With 2 speakers having power handling Nos 2.00 5,050.00 Fifty Rupees

capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance Zero Paise

of respectively 670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather &

Dust resistant ceiling/ wall mounted sound speaker with decorative

case & mesh grille with foam layer under grill, rotary- switch for Seven

selecting power taps / impedance having frequency response 150-

198 20000 Hz with following specifications (b) With 2 speakers having Nos 4.00 7,575.00

power handling capacity of 23W(MAX) & 15 W (RMS), each speaker Rupees Zero

have impedance of respectively 670 ohms/ 15W, 1 K.ohms/ 10W, Paise

2K.ohms / 5W & 4 K. ohms / 2.5W

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-

199 Nos 1.00 11,110.00 Hundred Ten

605, GMB-6C or equivalent in Bosch /Shure etc.

200 SPEAKER WIRE Mtr 500.00 85.85 Rupees Eighty

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed

fan motor, inverter type hermetically sealed rotary compressor with Fifty Six

accessories etc. duly connected separately erected evaporating unit

201 and blower motor with its accessories by means of extra supplied Each 2.00 56,353.96

proper insulated copper tubing,drain PVC pipes suitable for ( cost Rupees Ninety

includes Eco Friendly green gas charging and 15A plug top & Remote Six Paise

Control & MS Stand) with necessary core cutting. (1)For ISEER Range

(KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton capacity - Premium Cat.

Liaisoning work for additional load for requirement, electrical power

202 connection charges and inspector approval for power(to be paid to Lot 1.00 50,500.00

concern electrical power supplier company) Paise

Conventional type Smoke detector having following specifications :

Dual LED’s for 360 visibility. Advanced detection and communication

protocol. Easy installation and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54

Standard. Operating Voltage : 10 ~ 28V DC. O O Operating

Temperature : 0 C to 37.8 C. Relative Humidity : 10% to 90%

203 Nos 18.00 1,146.35 Forty Six

Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start

Up Time : 30 Seconds. Five Paise

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote

Output : 15mA maximum open collector. Smoke Sensitivity : 0.10 to

0.16 dB/m. Thermal Rating : 57 C(135 F). complete with Junction box

RAVEL make cat no. RE326 2SL

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Conventional type Fire Alarm Panel having Following specifications :

CE Approved. 16 X 2 Dot Matrix LCD Display. Standby battery backup

with built in charging. Switch Mode Power Supply. Tactile eypad for

easy panel operation. System ON indication. Low Battery visual

warning with audible ton. Fire / Fault status in unambiguous colored

LED indication. 2 programmable relays for fire,supervisory and fault.

All zones accept smoke detectors and any normally open contact Nine Thousand

device. Any Zone can be configured as alarm or supervisory. Zone Five Hundred

204 wise isolation and one man walk test facility. Programmable Aux Nos 1.00 9,595.00 Ninety Five

Outputs. Lamp test & Drill test facility. 100 All Events log with RTC. Rupees Zero

Date / Time / Password configuration. Programmable auto silence Paise

facility. Zone wise sounder / contact optional). TCP-IP / GSM facility

(optional). 120 / 230VAC + 10% -15%, 60 / 50 Hz, 50W Operating

Temperature 0 – 49° C / 32 – 120° F. Storage Temperature 0 – 60° C

Relative Humidity 93 ± 2% RH (non-condensing) at 32 ± 2° C / 90 ± 3°

F Charging voltage Charging current 28 V ± 5% 350mA (max) - RAVEL

Make cat no. RE-102R

SITC of Hooter / Sounder as per following specifications : Operating

Voltage : 24V DC Operating Current : 40mA Sound Level : 85dB@1m

Operating Temperature : 0 – 49° C / 32-120° F. Sounder Type : Piezo

205 Electric Type Tone Type : Fire Engine Siren Material : ABS Plastic Nos 3.00 949.40

Colour : Red Dimensions : 96 H mm X 76 L mm X 28 D mm Back Box : Paise

95 H mm X 75 L mm X 58 D mm Mounting Type : Surface / Flush

Mount complete with Back Box - RAVEL make cat no. RE24CS

SITC of Manual Call Point as per following Specifications : Operating

Voltage : 24VDC Operating Current : 30mA Colour : Green / Yellow /

206 Nos 3.00 808.00 Eight Rupees

Red Material : Plastic IP Rating : IP-50 Size : 86 X 86 X 50 mm - RAVEL

make Cat no. RE716 MR

Supplying, Installation, Testing and commissioning of Jockey Pump One Lakh

10.8M3/hour @70M Head.Horizontal Centrifugal End Suction. with

207 M.S.fabricated common base plate, coupling, coupling guard, No. 1.00 1,19,041.95

foundation bolts etc. for motor and details pump specificaion follow Ninety Five

as per specification as mentioned in tender volume.. Paise

Supplying, installation, testing and commissioning of electric driven

Monoblock Fire pump 960LPM at 70 m head 2900 RPM pump. Two Lakh Fifty

suitable for automatic operation and consisting of following:

208 complete in all respect as required. With Suitable HP, SQ cage Set 1.00 2,52,399.00

induction motor TEFC type suitable for operation on 415 volts, 3 Rupees Zero

phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot Paise

mounted type with class 'F' insulation, conforming to IS:

Five Lakh Fifty

Diesel Operated pump 70m head, 2900 RMP with day tank & battery Five Thousand

set complete with 100 ltr diesel Two Rupees

Control Panel for the operation of Jockey pump, Fire pump Electric

210 SEt 1.00 94,990.50 Hundred

and Fire pump Diesel with automation

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing, fixing, testing & commissioning of Pressure Switches for

automation of fire pumps. Pressure switches shall be double pole

211 single throw type suitable for 3 phase supply with diaphragm. Nos. 3.00 2,400.47

Aluminum Enclosure with IP 66 protection follow as per specification Seven Paise

as mentioned in tender volume..

Supplying, Installation, Testing and commissioning of C.I.Butterfly

valve conforming to I.S:13095 class PN 16 rating with Fittings,

212 Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification as Nos. 2.00 10,090.94

mentioned in tender volume.. Paise

of size: 150mm dia.

Supplying, Installation, Testing and commissioning of C.I.Butterfly Six Thousand

valve conforming to I.S:13095 class PN 16 rating with Fittings, One Hundred

213 Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification as Nos. 2.00 6,107.98 Seven Rupees

mentioned in tender volume.. Ninety Eight

of size: 100mm dia. Paise

Supplying, Installation, Testing and commissioning of C.I.Ball type Eighteen

Foot valve conforming to I.S:13095 class PN 16rating with Fittings, Thousand Five

214 Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification as Nos. 2.00 18,533.30 Hundred Thirty

mentioned in tender volume.. Three Rupees

of size: 150mm dia. Thirty Paise

Providing, fixing, testing and commissioning of C.I. Dual plate type

215 Non-Return Valve class PN 16 rating with fittings, flanges, nutbolts, Nos. 2.00 11,041.19

washers, gaskets etc.of sizes: 150mm dia Nineteen Paise

Providing, fixing, testing and commissioning of Above Ground MS.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm Two Thousand

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting, Three Hundred

216 screwing, welding etc. and providing all fittings like flanges, bends, Meter 35.00 2,391.95 Ninety One

tees, elbows, reducers, clamps, hangers etc. with painting of one coat Rupees Ninety

of primer and 2 or more coats of synthetic enamel paint of approved Five Paise

make / shade complete as per specification. 150mm dia

Providing, fixing, testing and commissioning of Above Ground MS.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm One Thousand

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting, Seven Hundred

217 screwing, welding etc. and providing all fittings like flanges, bends, Meter 15.00 1,744.20 Forty Four

tees, elbows, reducers, clamps, hangers etc. with painting of one coat Rupees Twenty

of primer and 2 or more coats of synthetic enamel paint of approved Paise

make / shade complete as per specification. 100mm dia.

Providing, fixing, testing and commissioning of Under Ground M.S. Three

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm Thousand Two

dia.) and IS: 3589 (upto 200 mm dia. And above) with IWL/pypecoat, Hundred Sixty

4mm thickness wrapping and coating and providing all fittings like Five Rupees

flanges, tees, elbow, fasteners with all follow as per specification as Seventy Three

mentioned in tender volume.. 150mm dia Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees, Three Hundred

unions, flanges with hot deep galvanized nut & bolt , reducer, clamps Sixty Three

& plug etc.with welding,threading,jointing. And Excluding cutting Rupees Fifty Six

holes in wall Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 25 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees, Four Hundred

unions, flanges with hot deep galvanized nut & bolt , reducer, clamps Fifty Nine

& plug etc.with welding,threading,jointing. And Excluding cutting Rupees Fifty

holes in wall Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees, Five Hundred

unions, flanges with hot deep galvanized nut & bolt , reducer, clamps Seventy Five

& plug etc.with welding,threading,jointing. And Excluding cutting Rupees Sixty

holes in wall Four Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 40 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees, Seven Hundred

unions, flanges with hot deep galvanized nut & bolt , reducer, clamps Ninety Seven

& plug etc.with welding,threading,jointing. And Excluding cutting Rupees Eighty

holes in wall Two Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 50 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees, Nine Hundred

unions, flanges with hot deep galvanized nut & bolt , reducer, clamps Forty Nine

& plug etc.with welding,threading,jointing. And Excluding cutting Rupees Thirty

holes in wall One Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 65 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees,

unions, flanges with hot deep galvanized nut & bolt , reducer, clamps

224 Mtr 30.00 1,201.78 One Rupees

& plug etc.with welding,threading,jointing. And Excluding cutting

holes in wall Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 80 mm dia.

Providing fixing testing and commissioning of GUN METAL 15 mm Three Hundred

size quartzoid bulb type sprinklers, set to operate at 57 degree Ninety Nine

Centigrade. Pendent type type with required accessories complete. Rupees Ninety

(GUN METAL) Six Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supplying , installation, Testing & commsioning of Flexible Drop

226 Nos. 40.00 1,514.85 Fourteen

Providing, fixing, testing and commissioning of RRL Fire delivery hose Six Thousand

63 mm Dia in 15 mtrs length with ISI MARKS is 636 type ‘A’ Fitted Five Hundred

227 with Stainless Steel male & female coupling ISI Mark IS :903 duly Nos. 4.00 6,502.28 Two Rupees

binned with copper wire winding follow as per specification as Twenty Eight

mentioned in tender volume.. Paise

Supply installation ,Testing & commissioning of single headed oblique Seven

pattern ISI hydrant landing valve with 80 mm dia flanged inlet &

228 mm dia instantaneous type female outlet complete with PVC cap and Nos. 2.00 7,650.75

chain, twist release type lugs WITH all accessories as per SI Standard Seventy Five

Conforming to IS-5290. (SS 304- Body SS-304 Coupling) Paise

Providing, fixing, testing and commissioning of weatherproof Six Thousand

standard fire Hose Cabinet wall mounting type 18 Gauge. (750 x

229 x 250) having Double Opening with M.S. fabricated stand, necessary Nos. 2.00 6,189.79

lock & key arrangement follow as per specification as mentioned in Seventy Nine

tender volume.. Paise

Supply installation ,Testing & commissioning of SS Fire Brigade Thousand Six

connection consisting of 2WAY. 63 mm instantaneous type male Hundred Fifty

coupling with 125 mm Dia. flanged outlet complete for fire water Rupees

tank. Seventy Five

Supply installation ,Testing & commissioning of SS Fire Brigade Thousand

connection consisting of 4WAY. 63 mm instantaneous type male Seven Hundred

coupling with 125 mm Dia. flanged outlet complete for fire water Thirty One

tank. Rupees Fifteen

Providing, fixing, testing and commissioning of Wall mounting Fix

type First aid Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS :

232 Nos. 2.00 10,877.20 Seventy Seven

444 Type II fitted wit SS Shutt off Nozzle follow as per specification as

mentioned in tender volume.. Paise

Supply installation , testing & commissioning of ISI Standard SS-304

branch pipe with nozzle of 20mm nominal bore outlet as per IS:903

233 Nos. 2.00 4,182.41 Eighty Two

suitable to fit with standard instanteneous type 63mm dia coupling

(SS-304) One Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supply installation testing & Commissioning of 25 MM dia Air Realese Ninety Four

valve complete in all respects. (GUN METAL) Rupees

Supply installation testing & Commissioning of Pressure guage 4" dial Three Hundred

235 0 to 16 kg/cm2 with syphon and cock complete in all respects (SS- Nos. 2.00 2,397.24 Ninety Seven

304). Rupees Twenty

Supply installation testing & Commissioning of 25 MM dia Ball Valve

236 (SS-304) complete with SS Ball with single handed lever complete in Nos. 2.00 969.10

all respects. Paise

Providing & Installation of ABC Stored Pressure Type Fire Extinguisher Two Thousand

6 Kgs. capacity bearing ISI Mark for Fighting ABC Class of Fire. The

237 Extinguisher will be Manufactured Strictly as per BIS: 15683:2006 Nos. 5.00 2,355.72

bearing ISI. Mark follow as per specification as mentioned in tender Seventy Two

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity, Five Thousand

made from the brand new seamless cylinder, as per IS: 7285 and CCE Four Hundred

238 approval, fitted with a Discharge hose and horn and wheel type valve Nos. 5.00 5,456.63 Fifty Six Rupees

with initial Charge as per IS: 15683:2006 specification, bearing ISI Sixty Three

Mark follow as per specification as mentioned in tender volume.. Paise

Providing & fixing Modular type ABC Dry Powder Fire extinguishers

litre capacity Fire Extinguishers. The Extinguisher will be

239 Nos. 5.00 4,447.03 Forty Seven

Manufactured Strictly as per BIS: 15683:2006 bearing ISI. Mark follow

as per specification as mentioned in tender volume.. Paise

Providing, fixing, testing and commissioning of On -Off Switch follow

240 Nos. 3.00 408.65 Eight Rupees

as per specification as mentioned in tender volume..

Sixty Five Paise

Providing, fixing, testing and commissioning of below Auto Glow Thirty Three

241 Signages follow as per specification as mentioned in tender volume.. Nos. 2.00 233.17 Rupees

Emergency Exit 4” X 12” Seventeen

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Getting of Fire Fighting System Approval from local fire authority

242 Job. 1.00 30,300.00 Three Hundred

with all other charges and documentations for getting No Objection

Certificate.(as per GMB Approved rate) Paise

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing) having

mm thick marina plywood IS 710 grade both side on aluminum

framing of gauge 16. Aluminum framing size for vertical & horizontal

support is 50 mm x 25 mm. Grid of aluminum framing is 600 mm x

600 mm. All exposed surfaces finished with 1 mm thick Laminate of

approved shade complete with mat finish. Necessary framing to be

erected above false ceiling. No extra cost to be paid for the same.

Before installation, make hole/face plate for conduit pipes of Six Thousand

electrical / networking cables with open able stud from partition Six Hundred

Including all materials and labor etc. Make necessary grooves as per Twenty Rupees

shown in drawing. Using of 12 mm thick clear glass with proper Fifty Five Paise

crystal edges & with suggested frosted films on glass. All joints are

covered with teakwood beading Patti finished with polish matching

with laminate. Including door of same design if required Complete

with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Architect/consultant/Engineer In

charge. Contractor has to provide all necessary cut outs (race ways.)

for Electrical works & no extra payment shall be made for it.

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% noncombustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value

of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm at joints

244 Sqm 66.00 1,674.15 Seventy Four

to get required length and size of 24X38mm made from 0.30 mm

thick (minimum) sheet, 1200mm centre to centre, and centre to Paise

centre to form agrid of 1200X600mm and secondary thick (Minimum)

sheet to be interlocked at middle of the 1200X600mm panel to form

grid of size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm made

of 0.40mm thick (minimum) sheet with the help of rawl plugs at

450mm centre to centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick Densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing & fixing work station / table having ht of 750 mm Top,

with MS Pipe Structure of Frame as per Architect/ Engineer Design or

Selection with specified powder coating and Back and side Ply of

table is also made up of 19mm Thick. Top of Table is 19mm thk ply

with laminate Finish Per Requirement and All internal & external Twenty Four

Joints finished with teakwood beading Patti. Common or front Part of

245 Table is Sectationized with MS Perforated Sheet. All exposed and Sqm 42.00 24,870.53

internal surfaces covered with Laminate Finish of approved shade & Rupees Fifty

Complete as per detail drawings & as instructed by Three Paise

Architect/consultant/ Engineer In charge. Complete with all necessary

hardware like nails, ss screws, table chain, Key board trey, TDS

channel, adhesives etc. Contractor has to provide all necessary cut

outs for Electrical works & no extra payment shall be made for it.

Providing & fixing office table / staff table having ht of 750 mm Top,

with 19mm thk plywood or MS pipe Structure as per Architect/

Engineer Design or Selection and Back and side Ply of table is also

made up of 19mm Thick. Top of Table is 19mm thk ply with laminate

Finish Per Requirement and All internal & external Joints finished

with teakwood beading Patti. Item includes fixing of drawers and

keyboard tray and storage with shutters under table as per drawing.

246 Sqm 8.00 29,350.96 Three Hundred

With grooves shown as per drawing. All exposed and internal

surfaces covered with Laminate Finish of approved shade & Complete Ninety Six Paise

as per detail drawings & as instructed by Architect/consultant/

Engineer In charge. Complete with all necessary hardware like nails,

ss screws, table chain, TDS channel, adhesives etc. Contractor has to

provide all necessary cut outs for Electrical works & no extra payment

shall be made for it. All ply should follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of

350mm/450mm/600 mm, having skirting of 75 mm, including

vertical supports & horizontal shelves shown as per drawing made by

19 mm thick Marin ply, Open Front Side for Selves with using 12 mm

thick Marin ply for framing. All complete with proper teakwood

beading and Teakwood molding as per design. Back ply is 12 mm

247 Sqm 60.00 10,381.62 Eighty One

Marin ply. All exposed are covered with 1 mm thick Laminate &

internal surfaces are covered with 1 mm thick laminate. External & Two Paise

internal joints covered with beading Patti complete with polish finish.

With grooves shown as per drawing. All complete with proper

hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS

etc. All Details as per shown in detail drawings & as per instructions

of architect/consultant / in charge engineer

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth

of 350mm/450mm/600 mm, having skirting of 75 mm, with proper

locks. includinf of vertical supports & horizontal shelves shown as per

drawing made by 19 mm thick Marin ply, having shutters of 19 mm

thick ply or Clear Glass with using 12 mm thick Marin ply for framing. Thirteen

All complete with proper teakwood beading. and Teakwood molding

248 as per design. Back ply is 12 mm Marin ply. All exposed are covered Sqm 41.00 13,815.77

with 1 mm thick Laminate & internal surfaces are covered with 1 mm Seventy Seven

thick laminate. External & internal joints covered with beading Patti Paise

complete with Polish finish. With grooves shown as per drawing All

complete with proper hardware like locks, S.S. Screws, MS Nails,

Magnets, table chains, cable manager SS 304 Handles of 250 mm and

100 mm dia etc. All Details as per shown in detail drawings & as per

instructions of architect/consultant / in charge engineer

Notice Board / Pin Board Thousand Two

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Hundred Fifty

Arrangement complete as per drawing and Directed by Engineer In Nine Rupees

Charge etc complete. Thirty Eight

Providing and fixing News paper stand size 650 x 820 x 1200 or

required height made out of 18 mm wtr.prf. [MR Grade] ply with

mm. thk inner laminate for top including back panel with shelves for

250 magazine and news paper as shown in drawing, all expose joints Nos 2.00 13,044.62

finish with teakwood beadsing patti with polish finish and provision Sixty Two Paise

of openable top for news paper storage complete as per detailed

drawings and Engineer-In Charge and Architect

Supplying and providing reading chairs with PP arms with soft PU

pads, Seat and back upholstered with cushioned and MS powder

coated frame and cantilever legs. Overall dimension 590 L x 600 W x

251 Nos 91.00 6,060.00 Sixty Rupees

915 H (Or as specified) complete as directed by architect and product

as per given specification. Complete as per architectural design and

concept and approved by Architect & Client.

Supplying and providing High Back Mesh office Chair As per

specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest Ten Thousand

-Fixed Arm rest Seven Hundred

252 -Knee tilt mechanism Nos 1.00 10,738.07 Thirty Eight

-360 swivel motion/ 100mm stroke gas Rupees Seven

-Nylon Star base Paise

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Supplying and providing Mid Back Mesh office Chair As per

specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

253 -100mm class 4 gas lift Nos 8.00 5,024.65

-PP Fixed Arm rest Five Paise

-Nylon Star base/Twin wheel nylons casters

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with Fifty Seven

paddle. Capacity-10 to 15 Ltr. Rupees Fifty

Supplying and providing dust bin made of 100% virgin plastic with

255 Nos 3.00 1,568.03 Sixty Eight

paddle. Capacity-120 L

Blinds : Providing and fixing as per approved make manual roller

blinds with Soltis fabric & spring drive system with steel ball

chain/one touch with speed control action roller blind with end

brackets with head ail, components, bottom bar.Color-Alu with

manual operation and warranty etc as per manufacturer’s

specifications. Fabric to be as per approved sample. All the work

complete as per the detailed drawing and instruction of

Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC One Thousand

with Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm, Nine Hundred

256 Openness Factor:3%, Visible Light Transmission (N-N): 2%-4%, Solar Sqm 115.00 1,962.94 Sixty Two

reflection (white) 65%, Internal Solar Factor (gtot): 0.35 - 0.48, Tensile Rupees Ninety

Strength (Warp/Weft):160/170daN/5cm,Tearing Four Paise

Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree

Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. All

complete as per approval of designer & instruction of Project

Manager. (The mode of Measurement: The size of the blind will be

measured from end to end bracket (Left to Right bracket) & height

will be measured from top of the pelmet till the bottom of the

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, Thousand Nine

with proportionately base dimenstion as per approved design by Hundred

client and complete as per instruction of engineer-in charge and Ninety Five

consultant. Rupees Zero

Providing and fixing Wall art/Photoframes of size 2ftx2ft with Four Hundred

258 wooden frame of size 2in x 1in consisting 6mm thick ply in back with Nos 30.00 2,497.23 Ninety Seven

digital vinyl printing and 5mm thick glass on top if required. Rupees Twenty

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 Thousand Sixty

259 x 2160 pixels with HDR TypeHDR 10+ complete as per approved make Nos 0.00 1,02,067.57 Seven Rupees

and as per selection by client an architect. Fifty Seven

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb

260 RAM DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE 2021 Nos 7.00 59,748.35

STUDENT, Full HD display of 21 to 23.8' with keyboard and mouse. Rupees Thirty

Providing and fixing Automatic Duplex laser printer with 30 pages per Thousand One

261 minute print speed, 8 mb memory, Large 250 sheet paper tray with Nos 1.00 15,157.58 Hundred Fifty

USB connectivity. Seven Rupees

Fifty Eight Paise

Supplying and providing xerox machine- -20PPM Copy / Print /Color Thousand

262 Scan / Duplex DADF /Single Nos 1.00 58,075.00 Seventy Five

Tray Rupees Zero

Providing and fixing Directional and Informative Signages- SS Plate,

Grade 304, Brush finish, 2mm Thickness with smoothen corner edges,

263 Sqm 1.50 92,442.19 Hundred Thirty

Acid etching with duco color, SS studs 1.5' away from wall.fitting as

per dirction of Architect and EIC Eighteen Paise

Providing and Fixing Library Name in Gujarati Letter SS304 1mm thick Thousand Five

264 letter 1.5" depth 10" Height with Duco color & fitting as per direction Nos 1.00 52,520.00 Hundred

of Architect & EIC. Twenty Rupees

Total Amount Rs. =

Total Amount Rs. =

Rupees Two Crore Forty Five Lakh Eight Eight Thousand Six Hundred Twenty Two And Thirty Five Paise

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in figures & words) of the estimated rates

mentoined above. Amount of my/our tender work out as under.

Estimated amount put to tender Estimated amount put to tender

Qty. May Total Amount

Qty. May Total Amount

Sr. No. Description of Item Unit Rate in Rate in

More Or Less (Rs.)

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

4 Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal