Repair to wooden and steel furniture at charri camp under Military Stn Dharamshala

Amount

Painting of old chair verandah (steel frame structure) with two coats of synthetic enamel white paint over a coat of chromium red oxide metal primer , after complete removal of existing paint including preparation of surface, complete all as specified and directed by Engr-in-Charge. Drg No. FD-256,FD-333

Removal of unserviceable cane and recaning complete seat and back of chair veradah with plastic cane 4mm wide of approved quality in godrej pattern, complete all as specified in drawing and directed by Engr-in-Charge.

Replacement of old unserviceable front leg of Chair Dining with new leg made out of sheesham wood made to shape duly wroughted, all as per drg No FD-279,FD-1105 & FD-16 after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of old unserviceable Rear leg of Chair Dining with new leg made out of sheesham wood made to shape dully wroughted, all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of old unserviceable side, front and back rails of chair Dining made out of sheesham wood made to shape dulyWroughted all as per drg after taking out old broken/cracked rails carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of old unserviceable bottom stiffners of Chair Dining made to shape duly wroughted, all as per drg after taking out old broken/cracked stiffners carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of old unserviceable back top stiffner of chair dining in rear leg made out of Sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked stiffners carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of old unserviceable cane and recaning complete seat of chair dinning with plastic cane 0.4mm thick 2mm wide woven of approved quality in godrej pattern, complete all as specified in drawing and directed by Engr-in-Charge.

French Polishing to chair dinning new or old with French polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/burnt saina the surface to direct vision, complete all as specified and directed by Engr-in –Charge.

Replacement of unserviceable Long rail of Bed Ply wood Top with Long rail of sheesham wood made to shape as per drawing after taking out old broken long rails complete all as specified and directed by Engr-in –Charge. Drg No. FD-246,FD-1102,FD-21

Replacement of unserviceable Plywood Top of bed with new Plywood 12mm top of bed 12mm thick (10 Nos of Ply) BWR commercial type of size 1800x 900mm as top of bed fixed with screws with three stiffeners after taking out the unserviceable ply, complete all as specified and directed by Engr-in –Charge.

French polish to the bed new or old exposed to view with French polish and make the surface smooth with emery paper and applying raw/burnt saina the surface to direct vision complete all as specified and directed by Engr-in -Charge.

Replacement of old unserviceable front leg of Chair Easy with new leg made out of sheesham wood to shape duly wroughted , all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in –Charge . Drg No FD-229,1108 &17

Replacement of old unserviceable Rear leg of Chair Easy with new leg made out of sheesham wood made to shape dully wroughted, all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of old unserviceable side, front and back rails of Chair Easy made out of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked rails carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of old unserviceable back top stiffner in rear leg of Chair Easy made out of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked stiffners carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of old unserviceable arms with new arms of chair easy made out of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked arms carefully, complete all as specified and directed by Engr-in –Charge.

Replacement of unserviceable cane of seat and back of chair easy with plastic cane 0.4mm thick 2mm wide woven of approved quality in godrej pattern, complete all as specified in drawing and directed by Engr-in-Charge.

French polish to chair easy (new or old) after filing the holes cracks with putty and make the surface smooth with emery paper and applying raw/burnt saina the surface to direct vision complete all as specified and directed by Engr-in –Charge.

Removing old unservicable parts of Charpoy GI pipe as under, replacing the same, making functional complete as per drg.No. FD-220 Taking out old worn out and unserviceable nylone newar and providing new plywood 12mm thick 7 Nos of ply BWR Grade ISI marked to IS-303 type BB plywood commercial type of size 1980 x 950mm with and including 8mm dia round head counter shank bolts and nuts and with washer by drilling 3 holes each on long rails and 2 holes each on short rails complete all as specified and directed by Engr-in – Charge. : Make Kitply/Century/Greenply

Taking out old worn out and unserviceable ply wood top and providing new plywood top 12mm thick 7 Nos of ply BWR Grade ISI marked to IS-303 type BB plywood commercial type of size 1980 x 950mm with and including 8mm dia round head counter shank bolts and nuts complete all as specified and directed by Engr-in-Charge. Make Kitply/Century/Greenply

Replacement/ Removing of dents and bends and smoothening the defective place of table office clerk (steel) and repairs to drawers as to slide easily in and out of the table including lock of drawers, complete all as specified and directed by Engr-in – Charge. Drg No. FD-84,FD-1004

Replacement of unserviceable top of table office clerk (steel) with new top made out of size 1200 x 600 x 19mm thick pre-laminated particle board exterior grade one side teak faced duly beading all round the top, complete all as specified and directed by Engr-in – Charge.

Replacement of unserviceable legs of Table (900 x 600 x 760mm without drawer) with new leg made of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked legs carefully complete all as specified and directed by Engr-in – Charge. Drg No. FD-84,FD-1004

Replacement of unserviceable short rails of Table (900 x 600 x 760mm without drawer) with new rails made of sheesham wood made to shape duly wroughted, all as per drg after taking out old broken/cracked short rails, complete all as specified and directed by Engr-in – Charge.

Replacement of unserviceable long rails of Table (900 x 600 x 760mm without drawer) with new rails made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked long rails, complete all as specified and directed by Engr-in – Charge.

Replacement of unserviceable top of Table (900 x 600 x 760mm without drawer) with new top made pre-laminated particle board size 900x600x19mm thick (OST) made to shape duly teak edging all round the top as per drg after taking out old broken/ cracked top, complete all as specified and directed by Engr-in – Charge.

Replacement of unserviceable leg of Table writing with new leg made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in – Charge. Drg No. FD-275,FD-1116,FD-33

Replacement of unserviceable both rails of table writing made of sheesham wood made to shape duly wroughted all as per drg after taking out old broken/cracked rails carefully, complete all as specified and directed by Engr-in – Charge.

Replacement of unserviceable of table writing with new top made of pre-laminated particle board one side teak face size 1200x600x19mm thick made to shape duly teak wood edging all round the top as per drg after taking out old broken/cracked legs carefully, complete all as specified and directed by Engr-in – Charge.

French polish to table writing (new or Old) after filling the holes cracked with putty and make the surface smooth with emery paper and applying raw/burnt saina to the directs visions, complete all as specified and directed by Engr-in – Charge.

Almirah Med Steel W/Shelves/Almirah Med Steel 1/2H, 1/2 Shelves FD-67, FD-1032 Welding to broken joints at top and bottom n exc. 2.5cm in length and thickness of metal to be welded n.exc,6mm, making the welded joint smooth by grinding etc, complete all as specified and directed by Engr-in-Charge.

Replacement of existing broken hinges with new MS hinges 75mm of same pattern, complete as specified and directed by Engr-in-Charge.

Replacement of existing broken /unserviceable door handle with new mild steel chromium plated handled with fittings completer all as shown on drawing and as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable bottom based leg duly painted with two coates of synthetic enamelled olive green paint over a coat of zinc chrome metel primer. MS sheet for legs shall be 1.00mm thick to be fixed by Gas welding after removing the existing unserviceable legs complete all as shown on drawing and as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable Almirah locks with new lock, 50mm size , 4 liver brass with duplicate keys complete all as shown on drawing and as specified and directed by Engr-in-Charge. Make : Harrison/Jayant/Link

Providing new cleats, nut & bolt to provide support for shelves, complete all as specified and directed by Engr-in-Charge.

Replacement existing old worn out unserviceable shelves with new shelves made out of MS plain sheet of 1mm thick nominal thickness ,made to shape and size, complete all as shown on drawing and as specified and directed by Engr-in-Charge.

Painting to complete almirah internally and externally both sides after preparing the surface by scraping, cleaning, denting, applying putty etc and finally applying two coats of synthetic emamel paint olive greeen by spray machine over a coat of zinc chrome metal primer , complete all as specified and directed by Engr-in-Charge.

Almirah large steel shelves, Almirah large steel 1/2H, 1/2 ShelvesFD-67 FD-1031 Welding to broken joints at top and bottom n exc. 2.5cm in length and thickness of metal to be welded n.exc,6mm, making the welded joint smooth by grinding etc, complete all as specified and directed by Engr-in-Charge.

Replacement of existing broken hinges with new MS hinges of 75mm of same pattern, complete as specified and directed by Engr-in-Charge.

Replacement of existing broken /unserviceable door handle with new mild steel chromium plated handled with fittings complete all as shown on drawing and as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable bottom based leg duly painted with two coates of synthetic enamelled olive green paint over a coat of zinc chrome metal primer. MS sheet for legs shall be 1.00mm thick to be fixed by Gas welding after removing the existing unserviceable legs complete all as shown on drawing and as specified and directed by Engr-in-Charge.

Replacement of existing unserviceable locks with new lock, 50mm size , 4 liver brass with duplicate keys complete all as shown on drawing and as specified and directed by Engr-in-Charge.Make : Harrison / Jayant/Link

Replacement existing old worn out unserviceable shelves with new shelves made out of MS plain sheet of 1mm thick nominal thickness ,made to shape and size, complete all as shown on drawing and as specified and directed by Engr-in-Charge.

Painting to complete almirah internally and externally both sides after preparing the surface by scraping, cleaning, denting, applying putty etc and finally applying two coats of synthetic emamel paint olive greeen by spray machine over a coat of zinc chrome metal primer , complete all as specified and directed by Engr-in-Charge.

M/S Ajay Saini

M/S MALHI CONSTRUCTIONS

vivek and co