Jasdan UGD-II under SJMMSVY : Working Survey, Soil Investigation, Design and Construction, Testing & Commissioning, Providing, Supplying, Lowering, Laying and Jointing Raising main and Gravity Main Pipeline Network, Providing House Connection, Property Connection, Road Restoration, Pumping Machinery, Pumping Station with Operation and Maintenance with All Allied Works for 02-[Two] Years Including 03-[Three] Years Defect Liability Period for Jasdan Nagarpalika Under Ground Drainage Project, Taluka & District: -Rajkot, Gujarat” Under SJMMSVY

Schedule-B : Jasdan UGD-II

"Working Survey, Soil Investigation, Design & Construction, Testing & Commissioning,

Providing, Supplying, Lowering, Laying and Jointing Raisingmain and Gravitymain Pipeline

Network, Providing House Connection, Pumping Machinery, Pumping Station with Operation &

Maintenance with All Allied Works for 02-[Two] Years Including 03-[Three] Years Defect

Liability Period for Jasdan Nagarpalika Under Ground Drainage Project, Taluka & District: -

Rajkot, Gujarat."

Schedule Name of Work Amount

1 Schedule-B-1 Rising Main

2 Schedule-B-2 Road Restoration

3 Schedule-B-3 Sewer collecting Network

4 Schedule-B-4 Pumping Station and Screen Chamber

5 Schedule-B-5 House Connection

6 Schedule-B-6 Property Connection

7 Schedule-B-7 Pumping Machinary at various Pumping stations

Total of Schedule B

8 Schedule-C Operation & Maintenance of 2-Years for UGD Network

Total of Schedule C

Total of Schedule B + C

Item Description Quantity Unit Rate Amount (Rs.)

1 Providing and supplying D.I. K-9 grade pipes for following nominal bore diameter with internal

cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS 8329-

For sewerage project cement mortor lining shall be with sulphate resistance cement

200 mm Dia. Pipe

2 250 mm Dia. Pipe 1020.00 Rmt 2,998.00

3 Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any

other specials as per BS-EN-545 / 1995 Class-A series K12 suitable for use with D.I.Pipes manufactured

as per IS:8329 / 1994 delivery of specials is to be made to site of works any where in Gujarat including

all taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete. 515.00 Kg 148.00

With external bitumen & zinc coating & internal cement mortar lining.

Socket & Spigot Type

80 to 300 mm dia.

4 Providing and supplying C. I. Air valves of approved make & quality of following class and diameter

including all taxes, insurance, transportation,freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete 12.00 No 2,496.00

Air valves double acting (DS2)

5 Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest Edition) of following class

and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading,conveyance to departmental stores, stacking etc. complete. 4.00 No 10295.00

PN 1.6 with handwheel/cap operated (PD type short body)

200 mm Dia. Pipe

6 250 mm Dia. Pipe 2.00 No 16402.00

7 Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined D. I. Pipes

of various classes with CI / MS specials of following diameters in proper position, grade and

alignment as directed by Engineer-in-charge including hydraulic testing etc. comp. 255.00 Rmt 113.85

200 mm Dia Pipe

8 250 mm Dia Pipe 1020.00 Rmt 146.05

9 Excavation for pipe line trenches for water supply, sewage line, manhole etc. all with shoring and

struting if required as per required gradient and line including safety provisions using site rails and

stacking excavated stuff including upto all required lead cleaning the site etc. complete for lifts and

strata as specified.

0.00 Mt. To 1.50 Mt. Depth

In all sorts of soil & Soft murrum,

10 In hard murrum,boulders incl.macdam road. 306.00 Cum 155.25

11 Providing and casting in situ mass cement concrete in grade M-10 (approx. corresp. to prop. 1:3:6)

using granite quartzite trap metal of size 12 mm to 25 mm including consolidation curing etc. 100.00 Cum 4,567.80

complete. With Form Work

12 Lowering , laying and joining in posotion following C.I./D.F. Reflux Valves, Butterfly Valves, Sluice

Valves and Air valves including cost of labour, joining material, including nut bolts and giving

satisfactory hydraulic testing tec. Complete.

For air valve:- 50 mm Dia Pipe

13 Sluice Valve :- 200 mm Dia Pipe 4.00 No 853.30

14 Sluice Valve :- 250 mm Dia Pipe 2.00 No 1,087.90

15 Refilling the pipeline trenches incl. ramming, watering,consolidating desposal of surplus stuff as

directed within a radius of 3 km. 941.94 Cum 25.30

Refilling as directed

Item Description Quantity Unit Rate Amount (Rs.)

16 Construction of valves chambers in brick or bela stone masonry, locally available in C. M. 1:6.

Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside

cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top cover of precast RCC

slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete as given

size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of

excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and

cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6

1.30 x 1.30 x 1.0 m Size for Sluice valve & air Valve

With precast slab in two parts 15 mm

17 0.90 m X 0.90 m and 1.0 mt Depth With precast slab in two parts 15 mm 12.00 No 8898.70

18 Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per

mix design or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap

metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle

vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement

and neat finishing) with centering and shuttering/deshuttering etc. comp. for structure for other than

water retaining.

Footing (without form work).

19 Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS

2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter

height or depth below G.L. for all diameters 8.00 MT 89,129.60

Do – deformed (TMT) bars confirming to relevant IS Fe – 500 grade for all diameters.

20 Drilling of 600mm dia Horizontal borehole for watermain pipeline crossing under the road incl in all

strata with requried length incl fixing of 500mm dia M.S/RCC casing pipe with pushing etc complete

various size of pipe for 273.1 to 355.6mm dia watermain.

Without Water main & with MS Casing Pipe-500 thick:8

Total for Schedule-B-1 (Rs.) =

Road Restoration

Item Description Quantity Unit Rate Amount (Rs.)

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6- hand broken

1 stone aggregates 40mm nominal size) and curing complete excluding cost of formwork in 1300.00 Cum 3,065.41

(A) Foundation & Plinth

Providing and laying controlled cement concrete M.150 for curing complete excluding cost of

2 formwork and reinforcement for reinforced concrete work in (A) Foundations, footings,Base 1300.00 Cum 3,991.74

of columns and Mass concrete

Construction of 100mm thick Granular Sub Base (Grading I) by providing coarse graded

Black Trap material, mixing by machanical means / rotavator, spreading in uniform layers

3 with motor grader as per required slope and gradient on prepared surface and compacting 1300.00 Cum 1,465.00

with vibratory roller at OMC to achieve the desired compaction complete as per MORT & H

Providing & laying spreading and compacted stone aggregate to wetmix macada 10 cm th.

As per sprecification including premixing with water in machinemix plant, carrige on road

materals by tripper laying in uniform layers with paver, base of coarse vibretor roller to the

face and vibreter achive the dry.

Providing & Laying 30 mm thick Bituminous Macadam with B.T. Aggregate as per MORT &

H specification & asphalt grade (VG-30/60-70) for tack coat @ 2.5 Kg. / 10 Sq.m. on B.T

surface With Mechanical Sprayer & Bitumen Grade (VG-30) for mixing @ 34.00 Kg. / M.T.

i.e. 3.40 % of total weight of mix including heating & mixing the aggregate & asphalt in drum

mix plant and spreading the same by paver finisher & consolidation with vibratory roller

including providing all materials equipments, tools & plants, fire wood, oil, kerosene, labour

charges etc. complete using contractor's own machinery drum mix plant & paver finisher etc.

Providing and Laying 25 mm thick Semi Dense Bituminous Carpet (Seal Coat) with B.T.

aggregate as per M.O.R.T. & H. gradation and bitumen grade ( VG-30 ) for mixing @

Kg/M.T. i.e. 5.0% by weight of total mix including heating & mixing the aggregate and asphalt

by of drum mix plant and spreading the same by paver finisher and consolidation with power

roller, including providing all materials equipments, tools and plants, oil, kerosene, firewood,

labour charges etc. complete using contractor's own machineries drum mix plant and paver

finisher etc. complete.

Total for Schedule-B-2 (Rs.) =

Sewer collecting Network

Item Description Quantity Unit Rate Amount (Rs.)

Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in

standard lengths of following class and diameter suitable for either collar joints or rubber ring

joints including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores, stacking etc.

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length socketed

pipe, cost included in rates below.

Class NP3/4 Test Pressure, 0.7 Kg / Sq.cm..

200mm dia pipe NP3

2 200mm dia pipe NP4 2863.00 Rmt 593.00

3 250mm dia pipe NP3 667.00 Rmt 527.00

4 250mm dia pipe NP4 63.00 Rmt 757.00

5 300mm dia pipe NP3 178.00 Rmt 755.00

6 300mm dia pipe NP4 139.00 Rmt 1,087.00

7 400mm dia pipe NP4 58.00 Rmt 1,873.00

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site of work

precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design &

Drawing including cost of reinforcement M.S. Angles or Flate, curring mold work etc.

8 Heavy Duty 1396.00 No 1,121.00

Frame suitable for 50 cm opening of MH

9 Cover suitable for 50cm opening of MH 1396.00 No 1,173.00

Renovation of manhole by increasing the height at top including cost of excavation, refitting

of C. I. manhole frame and cover curing etc. complete incl. all carting and providing of

materials which is required for the purpose (except manhole frame and

For all type manhole by providing RCC 1:2:4 Partition walls with required reinforcement

cm thick and circular opening with 500mm clear dia and 0.40 mt. av. ht.

Providing and erecting C. I. and MS ventilating columns 15 cms. dia. with C.I. ornamental

cap and Min 6.00 Mtr. Height (Height may be varying as per site) base fixed firmly with

necessary foundation with one coat of red lead oxide paint and one coat of any approved

11 colour with 15 cms, dia.10 Mt.in length with 0.35mt*0.35mt* M100 Encasing, stoneware or 11.00 No 38,911.40

R.C.C. pipe connection with M.H. including excavation and jointing as required etc.

as per drawing For 6 Mtr. Height ( 6 Mt MS pipe)

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with

shoring and struting if required as per required gradient and line including safety provisions

using site rails and stacking excavated stuff including up to all required lead cleaning the site

etc. complete for all lifts and strata as specified.

0.00 m to 1.5 m depth

In all sorts of soil & soft murrum

13 In hard murrum,boulders incl.macdam road. 12874.00 Cum 155.25

14 In soft rock and/or masonry in CM or L M or Lime Concrete. 9574.00 Cum 187.45

In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking ,chiseling or by

chiseling/breaking only.

1.50 m to 3.0 m depth

In all sorts of soil & soft murrum

17 In hard murrum,boulders incl.macdam road. 4314.00 Cum 170.20

18 In soft rock and/or masonry in CM or L M or Lime Concrete. 4597.50 Cum 205.85

In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking ,chiseling or by

chiseling/breaking only.

3.00 m to 4.50 m depth

20 In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling or by 3750.00 Cum 456.55

chiseling / breaking only.

4.50 m to 6.0 m depth

21 In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking ,chiseling or by 280.00 Cum 465.75

chiseling / breaking only.

Sewer collecting Network

Item Description Quantity Unit Rate Amount (Rs.)

Excavation in bituminous road as per required gradient and line including safety provisions

22 using site rails and stacking excavated stuff including up to all required lead cleaning the site 2650.00 Cum 288.65

etc. complete for all lifts as specified. Excavation in Bituminous Road

23 Excavation in CC Road 3050.00 Cum 427.80

Dewatering by pumping set of required capacity including temporary platform carting

pumping at site and fixing the same in position including all accessories, and fuel and labour

Pump set of Capacity

Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in proper

position, grade and alignment at all level as directed by Engineer-in-charge including

25 conveyance from stores to site of work, labour, giving hydraulic testing as per ISI code. 28739.00 Rmt 89.96

200 mm dia pipe

26 250 mm dia pipe 730.00 Rmt 111.55

27 300 mm dia pipe 317.00 Rmt 136.85

28 400 mm dia pipe 58.00 Rmt 174.80

Refilling the pipeline trenches incl. ramming,watering, consolidating disposal of surplus stuff

29 as directed within a radius of 3 km. 52341.50 Cum 25.30

Refilling as directed

30 do- with selected soil brought from outside including all lead 5700.00 Cum 201.25

Providing bedding incl. ramming, watering,levelling,consolidating etc. Complete as per

31 standard and instruction of engineer incharge. 4950.00 Cum 378.35

As above with required quality Sand brought from outside inclduing all lead

Providing, fixing and constructing of pre-cast RCC M-40 grade circular manholes with

internal dia 1.5m and up to specified depth having pre-cast RCC M-40 grade circular

manhole cover frame (ID 0.56m, OD 0.92m), conical piece (top ID 0.56m, bottom ID 1.5m,

vertical height 1.305m, wall thickness 125mm), and circular rings of required heights (ID

1.5m, height 150/225/300/600/900/1200 mm, wall thickness 125mm) below conical piece as

per required depth of manhole and having steel reinforcement in conical piece @ not less

than 80 kg per cum of concrete, including cast-in-situ PCC M-10 grade (1:3:6) foundation of

2.125m dia and 150mm thickness, PCC M15 grade circular wall ID 1.425 m, wall thickness

200mm, height equal to ID of sewer pipe + one wall thickness of pipe + 50 mm (to flush the

manhole frame with road top, height of wall can be increased but not more than 100mm),

PCC M15 grade benching and channel portion and up to top level of sewer pipe etc

complete with curing compaction and form work, supplying and fixing heavy duty SFRC

32 manhole cover as per IS 12592 (Part I and II), supplying and fixing plastic encapsulated 170 No 23900

CI/MS footsteps / SFRC footsteps, including cost of shuttering, steel reinforcement, testing

for water tightness etc complete in all respect as per drawing, as per specification and the

direction of the Engineer. Note:- Excavation of earth work and road cutting for manhole will

be measured and paid separately.

Pre-cast RCC M-40 grade circular manhole conical piece with inbuilt cover and frame

(height 1.305), cast-in-situ PCC M-10 grade foundation, PCC M15 grade circular wall ID

1.425m, wall thickness 200mm, wall height equal to ID of sewer pipe + one wall thickness of

pipe + 50 mm, PCC M15 grade benching and channel portion. Depth of manhole shall be

measured from top of manhole cover upto lowest invert of pipe. (Depth includes in the item

= height of Conical piece + ID of Sewer pipe + 1 Wall thickness of pipe + increased height of

wall (if any) + 50mm)

Providing and fixing pre-cast RCC M-40 grade circular ring of ID 1.5m, wall thickness

33 125mm, height 150/225/300/600/900/1200mm for constructing extra depth of manhole 400 Rmt 9220

beyond depth mentioned in above item.

Drilling of 500mm dia Horizontal borehole for watermain pipeline crossing under the road incl

in all strata with requried length incl fixing of 400mm dia M.S/RCC casing pipe with pushing

etc complete various size of pipe for 193.7 to 244.5mm dia watermain

Without Water main & with MS Casing Pipe-400 thick:6

Drilling of 600mm dia Horizontal borehole for watermain pipeline crossing under the road incl

in all strata with requried length incl fixing of 500mm dia M.S/RCC casing pipe with pushing

etc complete various size of pipe for 273.1 to 355.6mm dia watermain.

Without Water main & with MS Casing Pipe-500 thick:8

Sewer collecting Network

Item Description Quantity Unit Rate Amount (Rs.)

Clearing and grubbing road land including uprooting rank vegetation grass

36 bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier 25.00 HA 28173.36

and disposal of unserviceable materials (C) By mechanical means in area of light jungle

Providing and constructing vertical drop arrangement of 0.6 m and more height as required

including providing and jointing special such as double T. Bend required stoneware pipe

37 fixed in m-100 C. C. at required level as type design cutting, jointing and filleting as per 142.00 No 2477.10

specification etc. complete.

Vertical drop arrangement as above upto 0.6 m height.

38 Extra over item above for additional drop beyond 0.6 m 104.00 Rmt 2214.90

Providing and constructing Sewer manholes, scraper manholes and unit house connection

chamber, as per the type design in brick masonry in C. M. 1:5 and inside and outside 20mm

thick plastering in C. M. 1:3 necessary 100 mm coping with reinforcement in R.C.C.M.

200 fixing C. I. steps and fixing manhole frame and covers (But excluding supply of manhole

frame and covers) over manholes and house connection chambers and fixing Manhole

covers (but excluding supplying of manhole covers) over scraper manhole etc. complete,

providing and fixing safety chain wherever necessary as per the stipulations in the type

design complete as per latest CPHEEO manual. (excl. excavation)

Manhole type "A" Circular type having inside diameter of 1200 mm for depth upto 1.5 m

depth (for 150 mm to 500 mm dia sewer)

Manhole type "A" as above but upto 1.0 M depth.

40 Extra depth beyond 1.0 M but upto 1.5 M depth for "A" type manhole above. 101.30 Rmt 7622.20

Manhole type "B" circular type having inside diameter of minimum 1500 mm and for depth

from 1.5 M to 4.0 M (for 150 mm to

Manhole type "B" as above but upto 1.5 M depth.

42 Extra depth beyond 1.5 M but upto 4.0 M depth for type "B" manhole above. 499.40 Rmt 14159.95

Manhole type "C" circular type having inside diameter of minimum 1500 mm and for depth

beyond 4.0 m to 6.0 m (for 150 mm to

1800 mm dia sewers)

Manhole type "C" as above but upto 4.0 M depth.

44 Extra depth beyond 4.0 M and up to 6.0 M depth for type "C" Manhole above. 21.80 Rmt 21603.90

Total for Schedule-B-3 (Rs.) =

Pumping Station and Screen Chamber

Item Description Quantity Unit Rate Amount (Rs.)

Excavation for well including removing and spreading the excavated stuffs directed with

0.00 mt. to 1.50 mt. Depth

In all sorts of soil & soft murrum

1.50 mt. to 3.00 mt. Depth

In all sorts of soil & soft murrum

3 In hard murrum 33.55 Cum 228.85

3.00 mt. to 4.50 mt. Depth

In all sorts of soil & soft murrum

5 In hard murrum 30.24 Cum 244.95

4.50 mt. to 6.00 mt. Depth

In hard murrum.

7 In soft rock. 31.38 Cum 364.55

6.00 mt. to 7.50 mt. Depth

In hard murrum.

9 In soft rock. 6.34 Cum 386.40

In hard rock with blasting and chiselling or by chiselling/Breaking only

Shoring or timbering for trench with 50 mm thick planks and suitable size truts etc.

Providing and casting in situ mass cement concrete in grade M-10 (approx. corresp. to

12 prop. 1:3:6) using granite quartzite trap metal of size 12 mm to 25 mm incl. consolidation 4.61 Cum 4,567.80

curing etc. complete. with Formwork.

Providing and cast in situ C.C. in grade M-25 proportions of ingredients as per mix design

by weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm and or 6 mm

to 12 mm including scaffolding centering formwork, needle vibrated consolidation, curing

13 and hydraulic testing etc. complete (excluding cost of reinforcement) with centering and 18.21 Cum 9,288.55

shuttering/deshuttering etc. comp. up to 6 meter height /depth Av. G.L.for all water retaining

Flat bottom slab/floor slab/slab with shuttering

14 Beams 7.80 Cum 9,599.05

15 Vertical walls ( above 25 cm) 63.15 Cum 9,126.40

16 Column 2.21 Cum 10,574.25

Providing and cast in situ C.C. in grade M-20 (approx. corresp. to prop. 1:1.5:3) (proportions

as per mix design or as per table9 of IS456 2000 in masses by weigh batching ) using

quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 12 mm including scaffolding

centering form work, needle vibrated consolidation, curing and hydraulic testing etc.

complete (excluding cost of reinforcement) with centering and shuttering/deshuttering etc.

complete up to 6 meter height/depth from Av. G.L. for all structures with water proofing

Bottom slab or floor slab with shuttering

18 Beams 4.27 Cum 8,685.95

19 Column 2.94 Cum 9,609.40

Supplying cutting, bending, binding and placing in position steel as per plan and design and

as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only

20 including lift up to 6 meter height or depth below G.L. for all diameters 11.30 MT 89,129.60

Do – deformed (TMT) bars confirming to relevant IS Fe – 500 grade for all

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc. complete. (A) 25mm thick

Brick work using common burnt clay building bricks having crushing strength not less than

22 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) 17.76 Cum 4,345.62

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

23 brick walls for interior plastering upto floor two level and finished even and smooth in (i) 113.83 Sqm 188.98

Cement mortar 1:3 (1-cement:3-sand)

Providing 20mm thick cement plaster in single coat on single or half brick walls for interior

24 plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1- 83.60 Sqm 241.48

cement:3-sand).

Pumping Station and Screen Chamber

Item Description Quantity Unit Rate Amount (Rs.)

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level

25 consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 105.12 Sqm 330.72

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give an

approved brand and manufacture and of required shape even shade after thoroughly

brushing the surface to remove all dirt and

remains of loose powered materials.

Providing an fixing 25 mm x 5.2 mm MS railing with three horizontal rows and posts of angle

27 iron of size 65 mm x 65 mm x 8 mm RCC 150 mm and 1.15 meter height and placed at 1.85 50.00 Kg 88.55

mt / c/c including painting two coats and anchorage in CC etc complete.

Providing and fixing copper lightning arrestor incl. copper strip and earthing plate etc.

complete (incl. cost of excavation for earthing plate etc. rate per kgs of copper).

White washing with lime on wall surface (two coats) to give an even shade including

29 thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign 197.43 Sqm 13.30

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-

locked together through their entire length and jointed together at the ends by end locks

30 mounted on specially designed pipe shaft with bracket plates, guide channels and 7.00 Sqm 3,554.40

arragements for inside and outside locking with push-pull operation including the cost of

hood cover and spring etc. complete.(A) Shutters having width below 3.5 M

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x 7 cm. size including black enamelled iron

oxidixed fixtures and fastenings including primer coat of approved quality and two coats of

oil painting etc, complete. (ii) Fully Panelled.

Providing and fixing Water Level Indicator or depth gauge painted on TW plank 25 mm / MS

32 plate 4 mm thick float, level indicator sliding wire on standard pulleys incl. necessary 1.00 No 6,348.00

arrangement to prevent the swinging etc. complete with calibration up to 5 mt height.

Refilling the pipeline trenches incl. ramming,watering,consolidating desposal of surplus stuff

as directed within a radius of 3 km.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x

mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x

x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking arrangements,

stoppers handles including applying a priming coat of red lead paint.

Providing and fixing 50 cm wide M.S. Ladder fabricated from M.S. Flats 10 mm x 75 mm

with 20 mm dia steel bar steps in double rows, @ 30 cm C/C. The include stays of 10 mm x

50 mm flats fixed at 3 meter C/C with welding anchoring and 3 coats anticorrosive

paint.M.S. Ladder (Without safety cage)

36 Top cover for screen chamber with locking arrangment M.S. bar cover to be provided 50.00 Kg 58.90

Cement plaster 20 mm thick in C.M. 1:2 using water proofing compound of approved quality

including finishing etc. complete

(a) Providing and fixing M.S. square bars with flats at required spacing in screen chamber

38 with frame work including primer coat of red lend paint. M.S. square bar of size 10 mm x 50 150.00 Kg 44.96

mm. (b) Providing and fixing M.S. square bars of 10mm size at 50 mm C/C in M.H. portion.

Total for Schedule-B-4 (Rs.) =

House Connection

Item Description Quantity Unit Rate Amount (Rs.)

Providing and supplying ISI marked only Standard length Stoneware pipes in standard

lengths of following class and diameter including all taxes, insurance, transportation, freight

1 charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, 22500.00 Rmt 113.00

stacking etc. complete. (IS - 651 / 1989)

Class A Stoneware Pipes-100 mm dia.

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with

shoring and struting if required as per required gradient and line including safety provisions

using site rails and stacking excavated stuff including up to all required lead cleaning the site

2 etc. complete for all lifts and strata as specified. 22286.00 Cum 102.35

Total Excavation

0.00 m to 1.5 m depth

In all sorts of soil & soft murrum

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10- hand broken

3 stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in 370.26 Cum 2577.09

(A) Foundation and Plinth

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A) Foundations, footings, Base or columns

and Mass concrete For Benching

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (B) Slabs, landing, shelves, Balconis , Lintels,

Beams, Girders and Cantilever upto floor two level..

Providing formwork of ordinary timber planking so as to give a rough finish including

centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced

concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings

cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Brick work using common burnt clay building bricks having crushing strength not less than

7 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) 586.07 Cum 4376.38

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

8 plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1- 607.50 Sqmt 141.92

cement:3-sand) above beching

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

9 brick walls for interior plastering upto floor two level and finished even and smooth in (i) 5437.13 Sqmt 188.98

Cement mortar 1:3 (1-cement:3-sand)

10 Extra over above item for finishing with a floating coat of neat cement slurry. 5437.13 Sqmt 53.03

Lowering, laying and jointing Stone Ware pipes of following diameters with cement joints in

C. M. 1:1 proportion in proper position, grade and alignment at all level as directed by

11 Engineer-in-charge including conveyance from stores to site of work, Jointing material etc. 22500.00 Rmt 66.7

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus

12 stuff as directed within a radius of 3 km. 21153.05 cum 25.3

Refilling as directed

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at site of work

precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design &

13 Drawing including cost of reinforcement M.S. 2250.00 No. 813.00

Angles or Flat, curing mold work etc.

House Connection Chamber light duty - Frame

Total for Schedule-B-5 (Rs.) =

Property Connection

Item Description Quantity Unit Rate Amount (Rs.)

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with

shoring and struting if required as per required gradient and line including safety provisions

1 using site rails and stacking excavated stuff including up to all required lead cleaning the 6804.00 Cum 102.35

site etc. complete for all lifts and strata as specified Up To 1.5 mt Depth

In All Sorts Of Soil and Soft Murrum

2 In soft rock and/or masonry in CM or L M or Lime Concrete. 1701.00 Cum 187.45

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight

3 C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square 4500.00 Nos 1,292.19

mouth traps. (A) 100mm x 100mm size P type

Providing and supplying ISI marked only Standard length Stoneware pipes in standard

lengths of following class and diameter including all taxes, insurance, transportation, freight

4 charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, 31500.00 Rmt 124.00

stacking etc. complete. (IS - 651 / 1989)- Class AA Stoneware Pipe - 100 mm dia Pipe

Lowering, laying and jointing Stone Ware pipes of following diameters with cement joints in

C. M. 1:1 proportion in proper position, grade and alignment at all level as directed by

Engineer-in-charge including conveyance from stores to site of work, Jointing material etc.

comp Stoneware Pipe - 100 mm dia Pipe.

Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse sand : 4-graded

6 stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of 18900.00 Sqmt 304.47

neat cement. (A) 40mm thick.

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus

7 stuff as directed within a radius of 3 km. 8469.657 Cum 25.30

Refilling as directed

Total for Schedule-B-6 (Rs.) =

Pumping Machinary at various Pumping stations

Item Description Quantity Unit Rate Amount (Rs.)

SCF PUMPSET (Non clog type) :

Supply, installation, testing & commissioning of sewage submersible, non clog type suitable for

working on three phase, 50 Hz ± 3%, 415 V ± 10%, AC supply, 1450 RPM synchronous speed

with 3 core flat copper cable from pump to starter panel with cable end terminations, all

1.0 supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete 2 Set 207662

set & following M.O.C: Casing: CI, Impeller: SS CF8M, Wearing ring & Bearing bush: Bronze,

TC mechanical seal, CS / SS bearing, SS shaft with sleeve, SS strainer & MS motor body.

10 HP AT EXISTING PS A

2.0 30 HP AT PROPOSED PS 2 Set 484957

3.0 40 HP AT EXISTING PS-B 1 Set 667927

4.0 50 HP (1 AT PROPOSED PS & 2 EXISTING PS) 3 Set 701761

5.0 75 HP AT EXISTING PS 2 Set 1148527

6.0 100 HP AT EXISTING PS 1 Set 1188257

Providing and supplying & Lowewring & Laying ISI mark G. I. pipes with Couplings of following

class and diameter including all taxes, insurance, transportation, freight charges, octroi,

7.0 inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. 100 RMT 689.00

complete. (IS -1239) (Not for well/tube well column pipe)

Lowering, laying and jointing G. I. pipes with G. I. specials of following diameters in

proper position, grade and alignment as directed by Engineer-in-charge including

conveyance from stores to site of work, labour, giving hydraulic testing, etc. complete

REFLUX VALVE :- Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312

(Latest Edition) of following class and diameter including all taxes, insurance, transportation,

13.0 freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental 4 NOS. 15929.00

stores, stacking etc. complete Reflux valves PN 1.0 IS 5312 with ISI mark 200 mm

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly valves,

17.0 Sluice valves and Air valves including cost of all labour, jointing material, including nut bolts and 4 NOS. 853.30

giving satisfactory hydraulic testing, etc. complete 200 mm dia

(a) M.S. Ladder(Without safety cage)

Providing and fixing 50 cm wide M.S. Ladder fabricated from M.S. Flats 10 mm x

21.0 mm with 20 mm dia steel bar steps in double rows, @ 30 cm C/C. The include stays 100 MTR 3392.50

of 10 mm x 50 mm flats fixed at 3 meter C/C with welding anchoring and 3 coats

anticorrosive paint.

MS PIPE :- Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having beveled ends plate or coil

conforming to IS-3589-2001 or its latest revision/ ammendment for following thickness outside

diameter at store or site anywhere in Gujarat State including all taxes, insurance, transportation,

22.0 freight charges, octroi, inspection charges, loading, unloading conveyance to Departmental 60 MTR 1550.00

stores, stacking etc. all

complete. I/S Epoxy Painting (100 Micron ) & O/S Gunniting 25 mm

4.5 mm thick (on Delivery)-As per site requirement

MS PIPE LAYING :- Lowering, laying, Jointing & welding in position to correct line & level M.S.

Pipe with outer gunniting & inside lining/Epoxy painting on pedestal or chairs upon prepared

formation or prepared bedding in trenches the rates include conveyance from store to site of

work loading, unloading, joint plastering, hydrotesting etc.complete.

4.5 mm thick (on Delivery)-As per site requirement

Pumping Machinary at various Pumping stations

Item Description Quantity Unit Rate Amount (Rs.)

Supply, installation, testing and commissioning of MS fabricated specials with both side flanges

like Blind flange, Elbow, Eccentric/Cocentric tapers, bends, Y Joints, Flanges, ductfoot bend,

Puddle pipe, Bell mouth, Tee joint, Reducers, Nut-Bolt, Gaskets Etc of required size & in

required quantities as per relevant IS for dilevery & suction line.

CHAIN PULLEY BLOCK:

Providing chain pulley block with triple gear arrangement, lifting hook, laod chain & hand chain

& locking device etc.

Capacity: 1 Ton, Span: as per site condition, Lift: 6.0 m.

34.0 Additional lift 1.0 m 4 Set 600.00

EXPANSION BELOWS :- Supply, installation, testing & commissioning of flange ends

Expansion Bellow as per EJMA standards of overall length of minimum 300 mm, designed for

15 mm axial compression and 5 mm axial extension with tie rods etc. of following MOC &

35.0 pressure ratings. 4 NOS 6216.00

MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B;

Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS 1367..

PN 1.0 - For 1 DWF - 200 MM DIA

Full Bore Electromagnetic Flow Meter- Regular Power operated Power operated :-Design,

Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with

factory calibrated, Regular Power Operated, flanged connection, Flow sensor, Indicator,

transmitter and totaliser with all accessories viz. surge arrestor, associated cables, cabinets,

hardwares, etc complete as per following specifications:

Flow Meter/ Sensor:DC pulsed type, IP 68 Protection, Flanged process connection as per IS

1538 or equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy

Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/

Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with

Anticorrosive Paint Coil Housing with Junction Box, CS flanges. 1 Nos 106049.00

Flow Transmitter/ Converter ( Remote Field Mounted):Microprocessor based, Modular design,

line LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5%

accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse,

one status output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with

Anticorrosive Paint/ PU finish with glass window

enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter

communication etc along with wall mounted/ stand mounted cabinet..Full Bore

Electromagnetic Flow Meter (Regular Power Operated)- PN 10 - 200 MM DIA NOMINAL

40.0 250 MM DIA NOMINAL BORE 4 Nos 117201.00

41.0 300 MM DIA NOMINAL BORE 2 Nos 134422.00

42.0 450 MM DIA NOMINAL BORE 2 Nos 226181.00

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections

& complete erected in existing 16 G.M.S. housing.

25 AMP to 100 AMP cat-III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal &

44.0 magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader 3 Nos 7977.28

tinned copper & complete erected in existing 16 G.M.S. housing.

125 AMP Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.housing

200 AMP CAT III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A. with variable

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

250 AMP CAT III

Pumping Machinary at various Pumping stations

Item Description Quantity Unit Rate Amount (Rs.)

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet,

dust & vermin proof having hinged door with rubber gasket and necessary busbar supports with

Aluminium busbar having current density not more than 0.8 Amp. / sq.mm (Rated current / cross

47.0 section area) duly wrapped with colour insulation tape for phase sequence, three phase & 2 Rn.Mtr 2578.53

neutral each Suitable for following current capacity with necessary painting mounted on wall or

pedestal frame of required size with necessary connections.

Suitable for 63 A TO 100 AMP CAPCAITY

48.0 (B) Suitable for 200 Amp. Capacity 3 Rn.Mtr 3032.87

49.0 (B) Suitable for 300 Amp. Capacity 5 Rn.Mtr 5092.34

50.0 (B) Suitable for 400 Amp. Capacity 1 Rn.Mtr 5699.01

Control Panel Board:

DOL / Star Delta starter suitable for local & remote pump control application consisting of

MPCB, overload relay and contactors as per Type II coordination including digital voltmeter,

analogue ammeter with selector switch, run hour meter, required protective relays & control

SD from 8 to 10 HP

Auto transformer starter suitable for local & remote pump control application consisting of Auto

Transformer (vacuum impregnated, air cooled having three (3) tappings at 50%, 65% and 80%),

incomer MCCB / MPCB, overload relay and contactors as per Type II coordination including

52.0 digital MFM with RS 485 communication port, analogue type ammeter with selector switch, run 5 Nos 24276.00

hour meter, required protective relays & control accessories.

53.0 A. T. S. from 36 to 45 HP 4 Nos 33403.00

54.0 A. T. S. from 51 to 60 HP 6 Nos 46238.00

55.0 A. T. S. from 71 to 80 HP 2 Nos 65760.00

56.0 A. T. S. from 91 to 100 HP 1 Nos 86328.00

Lighting Distribution Board (LDB) as under:

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of

57.0 same company of MCB to be used) suitable for Three phase incoming and single phase 20 Nos 6354.30

horizontal type outgoing Per phase isolation type (PPI) single door 4 way Prewired Lighting

Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III

Outgoing: 20A SP MCB (4 nos.), 16A SP MCB (4 nos.)

MEDIUM VOLTAGE CABLES

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench /

58.0 cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming 400 MTR 108.00

to IS: 7098 (Part-1) & IEC: 60502 (Part-1) of following sizes:

4 c X 16 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

4 c X 25 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel

4 c X 50 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel

4 c X 95 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel

CABLE END TERMINATION AND CONNECTION :

Providing & fitting heavy duty brass cable glands (nickel-plated) with washers & rubber ring

conforming to IS, suitable for 3, 3½ & 4 core cables of following type & sizes:

Double Compression Brass Cable Glands

4 c X 16 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

4 c X 25 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

4 c X 50 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

4 c X 95 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

Pumping Machinary at various Pumping stations

Item Description Quantity Unit Rate Amount (Rs.)

Providing & fitting crimping type Cable Terminals (Lugs) conforming to IS of following types and

66.0 sizes Aluminium Tubular Terminals (in Sq.mm.) 32 Nos. 2.00

4 c X 16 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

4 c X 25 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

4 c X 50 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

4 c X 95 Sq.mmAL XLPE Armoured (For Incomer to MCCB to Busbar to Control Panel Board)

Maintenance free Chemical Earthing

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.(approved make

OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM 5 Nos. 5706.82

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report must be submitted by agency.

For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg..(for LT panel)

INTERNAL WIRING:-

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

71.0 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 500 Mtr. 78.06

colour for earth continuity of following size

with medium class Rigid PVC pipe and accessories

Main wiring with 3 wire 1.5 Sq.mm

Supply,Installation,Testing and Commissioning of Main wiring with 3 wire 2.5 sq. mm as per

72.0 tender specification / IS 500 Mtr. 96.06

INTERNAL POINT WIRING:-

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete. cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling

74.0 as per pipe erected with following type of accessories. 20 pt. 441.50

For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.Wire from nearby switchboard/mcb db board

(a)with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green) both are of ISI marked

1.1kV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected

concealed in/ on surface of wall/ ceiling complete with Modular type switch & 5 pin Plug erected

75.0 on PVC/ Metallic box covered with appropriate front plate modules erected on/ in wall/ ceiling as 50 pt. 663.50

per pipe erected with following type of accessories.For 16A Plug with 2-2.5 sq.mm Cu. Wire

from mcb db board. with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete cat-III.

Pumping Machinary at various Pumping stations

Item Description Quantity Unit Rate Amount (Rs.)

LED LIGHT FIXTURES:

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

76.0 LED driver efficiency > 85 % 30 each 751.34

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for

luminaire. ( fitting required LM-79 & LM-80 Certificates)

NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer

in charge may select any wattage capacity between the ranges shown.)

Tube Light with integral/ nonintegral driver

(A)Square/Circular shaped Surface / Recessed Mount Down light with provision for spring

loaded mounting clips complete IP20)

22-24 Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Providing and erecting Approved make 1200mm sweep ceiling fan, capacitor type, having

double ball bearing 450mm down rod, canopies, shackle, rubber bush, blades, electronic speed

regulator, suitable to operate on 230V,50Hz AC supply conforming to IS: 374/1979.Fan shall be

painted with white colour.

EXTERNAL LIGHTING:

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 20 Each 6029.70

%.CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used

for luminaire. ( fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The

Engineer in charge may select any wattage capacity between the ranges shown.)

Flood Light (IP-65), Surge -4KV,Light must have 440VAC line supply protection. It should

withstand 48 hours for 440VAC line supply.

above 60 to 90 Watts, Cat-III

B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms x

79.0 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaire with necessary 10 Nos 340.43

hardware materials duly painted. For wall mounting indoor & Outdoor Flood light Fixtures on

wall of Buiding.

SAFETY ACCESSORIES:

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or

Kg capacity with necessary clamp for erection on wall. (for 2no. LT Room Room)

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn,

crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for

81.0 medicinal user, Scissors, anti-septic solution (savlon or similar) etc. (All above contents shall be 20 Nos 297.00

of standard makes)

(For Pump house / LT Room)

Providing printed instruction Chart both in English and Gujarati and duly framed with front

82.0 glasses, for treatment of person suffering from electric shock. (1no. For LT Room) 6 Nos 129.06

Supplying 4 mm rubber matting of following thickness as per IS:15652/IEC 61111 (for LT

83.0 Panel) 400 SQ.MTR 1017.00

Pumping Machinary at various Pumping stations

Item Description Quantity Unit Rate Amount (Rs.)

Supply, installaton, testing & commissioning LV APFC panel consisting of required capacitor

banks for continuous duty to improve P.F.

0.85 to 0.99 in required steps enclosed in dust & vermin proof compartment, indoor type,

fabricated from CRCA sheet steel with

minimum thickness of 3 mm for base frame / channel / gland plates, 2.0 mm for load bearing

members / doors & 1.6 mm for internal

partitions, minimum degree of protection - IP 42, busbar chamber, required size of Al bus bar /

terminals, minimum 10 stage APFC relay,

metering, indicating lamps, push buttons complete as per IS: 16636-2017 with latest

ammendment & detailed technical specification and

data sheet as under.

84.0 Up to 50 KVAR capacity: APFC panel consisting following items. 5 Nos 138383.00

a) 125 A, 50 kA for 1sec. TP, TM based MCCB with spreader terminals & rotary handle b) 0-

125 A range analogue ammeter of 96 x 96 mm size

with selector switch

c) 3 nos. 125 / 5A, 10 VA CL-1.0 cast resin type current transformer d) Suitable rating MCCB /

MCB &Contactors for each capacitor bank

e) Suitable rating APP type capacitor banks (vacuum impregnated with non-PCB / non toxic oil,

internally delta connected with built in internal

fuses complete with discharge resistances & terminal cover) of approoved make in required

steps with well suited detuned reactor is placed in

series with each capacitor step. (e.g. 50 KVAR capacity will be provided in steps of 2 nos x

KVAR, 2 nos x 7.5KVAR & 2 nos x12.5 KVAR). f)

Enclosure dimensions: 1600 (H) x 1150 (W) x 600 (D)

Total for Schedule-B-7 (Rs.) =

Operation & Maintenance of 2-Years for UGD Network

Item Description Quantity Unit Rate Amount (Rs.)

Comprehensive Operation and Maintenance of Rising Main and Gravity

Main pipeline network. This system includes Pump Houses, Screen

Chambers to ensure reliable sewage water collection and various

components of Under ground Drainage scheme undertaken in this tender

mainly underground pipe network, rising main from pumping station to

various points of the network and other allied works. This also involves

the integration of essential mechanical, instrumentation, and electrical

components, alongside pumping machineries to enhance waste water

management efficiency including 1) Breakdown Maintenance or

Emergency Maintenance, 2) Day to day Maintenance 3) Preventive or

Periodic Maintenance, 4) Major Maintenance (or Special repairs and

replacement including Training to O & M staff of Municipality. The rate

shall also include all consumables and deployment of Manpower but

excluding electric power (The electrical bill for power shall be paid by the

municipality) . The O & M work shall be carried out as per detailed

specifications in the tender & maintaining the record for the same.

For 1st year O&M

For 2 year 1 Year 9,28,687.20

Total Amount of Schedule C =

Total Amount of Schedule C =