Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-AOC 31 SARASWATI SONI MARG DEHRADUN | DEHRADUN | L1 | Accepted-AOC 1st Lowest Reasonable | |
| 2 | L2₹2.9 L+₹12,302.10 (4.45%)Rejected-Finance DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-Finance 2nd Reasonable | |
| 3 | L3₹3.0 L+₹25,928.57 (9.38%)Rejected-Finance 3491 14 HARIPURA DHAPAI ROAD AMRITSAR | AMRITSAR | PUNJAB | 143001 | L3 | Rejected-Finance 3rd Reasonable | |
| 4 | L4₹3.5 L+₹72,092.52 (26.1%)Rejected-Finance 133 SADAK DUDHLI SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L4 | Rejected-Finance 4th Reasonable |
Tender Value
Refer Docs
EMD Value
₹6,400
Closing Date
4 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Raiwala
AGE(I) Raiwala
Provn of one toilet (01 x WC, 02 x urinal and 01 x WHB) along with one sewage pit for disposal of sludge in 849 Fd WKSP at Raiwala Mit Stn
2023_MES_585883_2
8894/E8
Open Tender
Civil Works
Works
150 days
AGE (I) Raiwala
As per tender document
6 documents required · 6 mandatory
₹500
Yes
AGE(I) Raiwala
₹6,400
Yes
14 Jun 2023
13 Apr 2023
6 May 2023
13 Apr 2023
4 May 2023
20 Apr 2023
Amount
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation ,etc and getting out in soft/disintegrated soil complete all as specified and as directed.
M & L for Plain Cement Concrete Type D2 1:4:8 (using 20 mm graded stone aggregate) in foundations, filling and mass concrete.
Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6
Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6
M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately.
Supply only water proofing compound (WPC)
M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge..
M&L for 75 mm thick P.C.C 1:4:8 type B-2 using 40mm graded stone agg as in sub base of floor complete all as specified and as directed
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ractangular )area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement.over and incl 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed cement to match complete all as specifed and as directed
M&L for 300x450x7 mm thick glazed cloloures ceramic tiles as in dado incl 10mm thick back coat in CM 1:6 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment.
M&L Rendering 15 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:6 finished to even & smooth without using extra cement.
M&L Rendering 15 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:4 finished to even & smooth without using extra cement.
Material & Labour for two coat of cement base paint on new plastered surface over one coat of primer including preparation of surface complete all as specified and as directed by Engr-in-Charge.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.
M & L for providing reinforced cement concrete B0 1:2:4 Nominal Mix using 12.5mm graded stone aggregate as beams , cantilevers, bressummers , lintel over 1.5 mtr span complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M&L RCC 1:2:4 type B1 (using 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc.
Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick.
Form work rough finished surfaces of concrete to sides and soffits of beams , lintel and similar items complete
M&L for mild steel TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S & F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing
M&L Second class hard wood plain, solid, straight chowkats (SAL) and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.Complete all as specified and directed by Engineer-in-charge
S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc
Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane.
S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section
S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21.
S & F 75 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer.
M&L cement concrete 1:3:6 type C-2 (using 20mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement complete all as specified and directed.
S&F Wash basins (Padestal pattern) 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fitting
S & F 15 mm bore Stop valves (angular stop cock), cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle or concealed screwed both ends for iron pipe or for unions
S & F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule
S & F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe.
S&F Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor .
S&F PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for IWC of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make .Complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 600mm
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.
S & F 110 mm bore PVC (SWR) bends of any radius with access door.
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door.
S & F 75 mm bore PVC (SWR) Vent Cowl
S&F 15 mm GI tubing medium grade with all fixed complete to walls and ceilings or laid in floors all as specified and directed by Engr-in-Charge.
S&F Rotational moulded polyethylene water storage tank 500 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.
S&F 20mm dia ball valve high pressure PTMT with epoxy coated aluminium rod & high pressure plastic ball screwed for iron pipe and fixed.
S & F for Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement,
S&F for Brass CP urinal spreader fixing with 15 mm dia pipe.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws complete all as specified and directed .
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall and gutter, fixed with self tapping screws complete all as specified and directed .
S & F Rolled Mild Steel sections confirming to Fe 410 - W as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates
Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
Returning, filling in, including spreading, levelling , watering, and well ramming in layers n.exc 25 cm thick complete all as specified and as directed
Removing excavated material (Soil) to a distance n. exc 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed.
M&L Concrete bed to drain pipe 110mm dia incl. packing under and haunching against the sides of pipe PCC 1:4:8 type D2
Material and labour for point wiring for one light point/one fan point/ on independent board, controlled by one switch with 1100 volts grade single core confirming to IS 694(1990) PVC insulated unsheathed 1.5 Sq mm stranded copper conductor cable (FRLSH) with continuous earth wire of 1.5 Sqmm stranded coopper conductor cable (FRLSH) PVC insulated unsheathed, drawn in and including concealed nonmetallic rigid PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia, (colour coding of wires shall be for phase, neutral and earth wire all as specified ) sunk in MS/pressed steel boxes thickness not less than 1.6 mm painted with black bituminous paint from outside and two coat of aluminum paint inside for housing switches/sockets, etc covered with 2.8 mm thick white laminated 'Bakelite' Sheet(ISI Marked) complete all as specified and as directed (a) One light point /Exhaust fan point controlled by one no of one way 5 Amps switch
M & L for switch piano 230 volts, AC, flush type, single pole one way 6 Amps ISI marked complete all as specified and as directed.
S/F ceiling rose surface Bakelite AC 220/240 volts 2 terminals /3 terminals complete all as specified & directed.
Supply and fix surface mounted LED luminiare, 10 watt with all accessories having polycarbonate extruded channel with diffuser for glare free light, inverter LED batten with square profile and polycarbonate channel, Lithium ION battery with charging time 8-10 hours and back up time upto 4 hours internally pre-wired through flexible wire connecting with ceiling rose all as directed. Make: Havells cat No: LHEXACP7FNIW010 or equivalent model of Crompton/Luker/Shakti
Supply and fix building security light fitting, housing made out of die cast aluminum alloy with toughed glass, IP 65 protection, having clamp for mounting on wall working on 240 volts AC 50 Hz, 20 watts consisting of reflective lens, wired with appropriate driver, PF 0.98 having over voltage protection up to 400 volts, surge protection lever 7-10 KV, thermal short circuit protection, THD, 10 %, made up of long life LED chips (SMD) in modular with Ra.70 LED lumen efficiency, 120 Lumen/watt including fixing on wall with 2 Nos MS clamps made of 40 x 6 mm Flat and bracket made on 40 mm dia light grade light GI pipe bend to shape, not less than 1.0 mtr long use reducer for insert the pipe in light fitting for required size including connection with 02 single core PVC insulated copper conductor cable 1100 volts grade of size 1.5 Sqmm complete. Make: Shakti Cat No: SZPCLPM020 or equivalent model of Havells/Philips/Crompton
M & L sheet metal MCB DB SPN 02 way 240 volts, Single door type powder coated with 200 Amps rated bus bar, neutral link, earth rail & din rail, ISI marked for fixing MCBs, complete all as specified and directed by Engr-in-charge. Note: (i) MCBs measured and paid for separately under respective items. (ii) when PVC cables connected to MCBs use suitble size of copper ferruel for connection and Incoming UG cable use suitable size of lugs for connect cable through MCBS on DB.
Supply and fixing MCB SPN 10 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), ISI marked, 50 hz with cable connection and copper lugs complete with connection testing .
M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 3.20 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 5 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge. )
S&F Exhaust fan AC single phase 230/240 Volt of size 300 mm sweep, metallic body powder coated painted finish, Power consumption- 50 W, Air deplacement -1290 Cum/Hr, RPM-900 complete with louvers including making whole and grouting of nut bolts etc and making good the disturbed sufaces of wall complete all as specified and directed. Make - Orient/Bajaj/Havells/Crompton
Material and labour for fixing or passing through pipe, laid in trenches, fixed on wall, LT panel board, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 10 sqmm 2 core with required aluminium cable lugs, lugs should properly crimp with crimpping tools, including laying cable route indicators of suitable size RCC or steel type as per site requirement all as specified and directed. by Engr-in-charge. Note:(i)GI tubing required shall be measured and paid separately under relevant item of sch as supply and laying
Excavation in trenches for taking out/laying of cable and pipe line not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide in soft/loose soil. complete all as specified and directed.
Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in each layer in any type of soil.complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point. complete all as specified and directed.
M&L for fine dry sand cushioning for underground cable by providing layers of sand 8 cm before laying and 15 cm deep after laying the cable including streching the cable (measurement to be taken after punning down consolidated thickness). complete all as specified and directed.
M & L for cable protection bricks common burnt clay sub class 'B' designation 75 for protection of UG cable laid in trenches all as specified and directed at site complete all as specified and directed.
M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) of minium size 150mm X 100mm in respect of width and thickness complete all as specified and directed.
Supply, laying & joined Galvanised Tubing 50 mm bore, light grade as in sleeving etc laid in trenches/pole post/under culvert/under road etc for cable protection complete all as specified and directed. Make:Jindal/Indian Tubes co
Supply and lay pipe galvanized, "Medium grade class' including fittings 20 mm size with plain socket on under ground and connecting near by exisiting pipe line all as specified and directed by Engr-in-charge.
Excavation in trenches in any type of soil and n.exc 1.5 m wide and n. Exc 1.5 in depth for laying GI tubing for connect to near by water pipe line and getting out trimming the sides, forming bottom surface to required level in any type of soil complete all as specified and directed.
Returing, filling in any type of soil including spreading, levelling, and well ramming in layers not exc 25 cm thick, in any type of soil complete all as specified and directed.
Removing excavated material ( surplus soil) to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specifed and directed.
Cutting of existing GI pjpe of size 40 to 50 mm bore in position for insertion of new branch line of any bore complete all as specifed and directed by Engr-in-charge.
S & F testing gun metal gate valve with iron wheel head screwed both ends for GI pipe complete, of 20 mm bore all as specified and directed by Engr-in-Charge.
TARUN ENGINEERING WORKS
AMARJEET SINGH AND CO.
ANKIT KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .