Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹9.0 L+₹48,504.24 (5.72%)Rejected-AOC THATTANANDIYIL PATTIAM KUNNOTH PARAMBA GRAMA PANCHAYATH KUTHUPARAMBA | KANNUR | KERALA | 670001 | L2 | Rejected-AOC L2 |
Tender Value
₹8.5 L
EMD Value
₹21,183
Closing Date
8 Feb 2023, 6:00 pmClosed
EXECUTIVE ENGINEER
LSGD DIVISION KANNUR
Road work
2023_LSGD_553994_12
DB/TN/7(4d)/22-23
Open Tender
Civil Works - Roads
Item Rate
180 days
Kannur
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,183
Yes
13 Mar 2023
31 Jan 2023
10 Feb 2023
31 Jan 2023
8 Feb 2023
31 Jan 2023
Amount
tarring
4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead
75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
75.5.2.3pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)
75.7.1:DRY RUBBLE MASONRY with hard stone, including Through/Bond stone in foundation and superstructure including packing to compactness to lines and levels, cost and conveyance of all materials labour charges etc. complete as per approved drawing and relevant technical specifications.
3.14:Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
11.8:Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202
11.4.4:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 IV. R.C.C grade M 20
OD279829/2022-2023:Steel work in built up tubular (round ,square ,or rectangular hollow tubes etc.) trusses etc. , including cutting hoisting ,fixing position and applying a priming coat of approved steel primer , including welding and boltedwith special shaped washers etc. complete Hot finished welded type tubes.
OD279013/2022-2023:Supplying and fitting name boards of size 75x45cm made with GI plane sheet 1.25mm thick (classIIII) fitted with 35x35x4mm MS angle 2no. horizontally and 3no. vertically to make a frame for strengthening the GI sheet , fitted 2no. GI pipe verticaly 90cm above from ground level and fixing in cement concrete 1:2:4 , 30cmx30cmx30cm including cost and conveyance of all materials etc. cmplete .
OD279014/2022-2023::Printing New Letters and Figures of any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701 Malayalam ( commas and the like not to be measured and paid for. Half letters shall be counted as half only)
Ajith T M
Bidder Name
Ajith T M
U M VINEESH KUMAR
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_813887.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .