NOTICE INVITING TENDER FOR EXECUTION OF WORK FOR MAINTENANCE OF SUB CIRCLE OFFICE AND TOILET BLOCK AT SUB CIRCLE, TRICHY

Amount

Constriction of masonry wall using AAC blocks 100 mm/ 125 mm thick with Grade-1 AAC blocks in cement mortar 1:4 for conference hall and toilet block walls including cost of all materials and labour charges etc.,

Plastering the conference hall and toilet block walls in cement mortar 1:2, 20mm thick including cost of all materials and labour charges etc.,

Painting to the interior walls of conference hall with the base coat of white cement paint and distemper over the base coat using first quality ready mix distemper and finishing with synthetic enamel texture paint two coats including cost of materials and labour charges

Supply & Fixing of all sanitary items for the toilet block attached to conference hall including necessary plumbing works by using 5” PVC pipe to a length of 10ft length for drainage construction (including all conduit fittings like PVC bend T etc.,) and all sanitary fittings items i.e, good quality western closet, wash bastion water tap, health faucet and angle cock etc., to be appropriately fixed including all material cost and labour charges.

Relocating the existing aluminum partition wall from its position at conference hall so as to get more space in the existing room including necessary plywood covering with new plywood sheet and WPC door etc.. Including labour charges for removal of existing partition and resetting to new places with all other Connected requirements etc, complete. (Aluminium Partition size: 3.50 m X 2.70 m)

Supply & Fixing of all electrification conduit wiring fittings etc., to the conference hall and connected portion with good quality materials of PVC conduit pipe of measuring approximate length of 120ft, good quality 4sqmm and 2sqmm wire using approximate 1 coil each, 4 Nos Tube light set fittings, 1 No Ceiling Fan including all necessary switches and all connected wiring related fittings like PVC bend, PVC elbow, clamps, screws, switches etc., the work to be carried out under supervision of approved electrician with cost of all materials and labour charges.

Providing and laying Ceramic floor tiles of size 300x300 mm of 1st quality approved make and colour, shades, laid on 20 mm thick bed of cement mortar 1:4 jointing with grey cement slurry including pointing the joints with white cement and matching pigments etc. for conference hall toilet flooring portion and side wall area including cost of all materials and labour charges etc., complete

False ceiling work at conference hall including cost of all materials, labours and other charges etc complete i.e, Providing and fixing at all height false ceiling of 4 mm thick phenol bonded Bamboo Mat board (595x595 mm) conforming to IS: 13958-1994 including providing and fixing of frame work made of Gl angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 mm c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64 mm Gl wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in- charge.

Vinyl flooring work (2mm thick) using good quality material for conference hall flooring area including cost of all materials and labour charges.

Removing the existing pre laminated partition at sub circle office including removing beadings, screws, available door members etc (all labour charges).

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) partitions at subcircle office with laminated plywood sheet extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass /stainless steel screws, all complete

Making, supplying and fixing of MS Grill door using 50x50x6mm ms angle iron as vertical post with 50x6mm flat in horizontal at equal interval and 16mm dia round rod in vertical section at 10cm c to c as per the design at sculpture shed including bending, fabricating, fixing the grills in position with cement concrete including painting the grills with two coats of synthetic enamel paint over a coat red oxide etc complete.

SM ENTERPRISES (BID ID -3127822)