WORK SERVICE FOR PROVN OF NIGHT LOADING FACILITY AT VARIOUS SITES AND TRANSPORTATION SECTION AT 24 (AF) UNDER AGE (I) AF MANAURI

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc for laying of cable and for pole / struts, etc and getting out in soft/loose soil complete all as specified and directed. (NOTE: Excavation & earthwork for cables shall be carried out by JCB's or manual method as per direction of Engineer-in -Charge.)

Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material to a distance not exc 50 m & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L sand cushioning to U/G cable in layers of 23 cm thick (8 cm before laying the cable and 15 cm thick after laying the cable, punned thickness shall be measured) in trenches complete all as specified and directed. (NOTE : Punned thickness of sand layers shall be measured and paid).

M&L brick sub class 'B' well burnt laid dry laid flat with width equal to the length of brick over cable protection complete all as specified and directed.

Supply, laid in trench / fixed with surface of wall / roof etc all in given location, jointing, thembling and glanding in suitable size , testing to cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armored electric power cable (heavy duty) with aluminum conductor 1100 Volts , grade cross section area 35 Sqmm x 4 core (earthed) complete all as specified and directed. (NOTE: Excavation & earth work, sand cushioning, brick protection shall be measured and paid under respective items.)

Supply, laid in trench/ fixed with surface of wall / roof etc all in given location, jointing, thembling and glanding in suitable size , testing to cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armored electric power cable (heavy duty) with aluminum conductor 1100 Volts , grade cross section area 25 Sqmm x 4 core (earthed) complete all as specified and directed.

Supply, laid in trench/ fixed with surface of wall / roof etc all in given location, jointing, thembling and glanding in suitable size , testing to cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armored electric power cable (heavy duty) with aluminum conductor 1100 Volts , grade cross section area 10 Sqmm x 4 core (earthed) complete all as specified and directed.

Boring of holes under road/drain/PCC path by manually method for inserting upto 150mm dia light grade GI tubing for cable protection all as specified and directed. (Note : (i) Quoted rate shall be included cost for required materiel for repair to disturbed surface all as per existing. (ii) Depth of bore shall not be more than 1.5m below natural Ground level.

S&F steel water tubing 40mm bore, galvanised, light grade with and including required fittings such as clamp made out by GI strip in size 32mm , Nut bolts etc for fixing to cable protection / laid in trenches, under road crossing, fixed on poles /walls etc complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-2, using 40mm graded crushed stone aggregate for plinth /foundation complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-1, using 20mm graded crushed stone aggregate for plinth /foundation complete all as specified and directed.

S&F cross arms / angle frame / MS sheet to made out bracings supports / clamp , back plates fabricated from structural steel sections/ wire mesh or chain link fencing etc / nut bolt washers to be fixing etc all as site required in given specification including cutting/ welding/ jointing etc to hot /cold drilling holes for bolts in any shape or size as indicated by Dept incl painting in two coats using synthetic enameled paint over one coat of primer red oxide complete all as specified and directed. (Note:- Size of structure shall be approved by Deptt).

Supply. Install, testing and commissioning of LT Panel in cubical housing cabinet, out door type, double door platform mounted (minimum height 45 CM above normal GL and 30 CM below normal GL) , CPRI approved factory made, totally enclosed, dust and vermin proof made out by 3.15 MM thick CRCA MS sheet and indicating size 750 mm X650 mm x 750 mm with full built upon angle iron frame in size 40 x 40 x 6 mm, having front and rear hinged both side openable doors and lifting lugs (02 Nos) , locking arrangement to be connect to earthing strip at rear side, bottom detachable both side openable ,gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers sheet steel bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment. The panel shall be epoxy powder coated and the control circuit shall be connected by suitable size of aluminum strip in proper colour coating and drawn through in flexible conduit. The panel should be suitable for 415 volts ,50 Hzs, 3 phase, 4 wire system ,suitable rating CTs and PTs . internal connection should be made by aluminum strip in suitable rating ,making incoming and outgoing connection using gland in suitable size including grouting KIOSK on floor (60 cm above the ground surface). in floor angel iron 40 x 5 mm imbedded to fixed the KIOSK with nut bolt, floor PCC (1:2:4) type B1 using 20 mm grade stone aggregate ( minimum 50cm above GL and 30 cm below GL) including name plate or danger notice plate with writing of configuration of boons & skull over danger plate complete comprising the following items:-

S&F flood light fitting LED 160 W with fixing accessories ,mounting bracket nut bolt washer to be fix on top edge of high mast tower / steel structure as site with making all connection using three core flexible copper cable in size 2.5 Sqmm drawn through in PVC conduit medium grade heavy duty pipe with accessories fixed inside the tower from MCB in control box for each light fittings (minimum 18 RM Cable length with each fittings)complete all as directed. Note ; Quoted rate shall be included the cost of copper cable , PVC conduit and fixing accessories etc all as site required complete. (Make:- Bajaj (Turbo) cat No BARFEG 160 W LED in equivalent Wipro/ Philips in other makes as per list of make & manufactures approved by AGE (I))

Supply, installation, erecting , transportation at site of regular continuously tapered polygonal shape 12.5 Meters high Mast tower suitable for 6 to 9 lantern symmetrically fitted along with their control point suspension system ,High mast head assembly with three - six pully system for accommodate wire rope made out by stainless steel wire rope of 8mm dia in double run of cable/ wire confirming to SS-304 grade. High mast shaft be in two section made from H.T. steel of grade S 355 JO as per BSEN10025.S355JO hot galavinsed and suitable for with speed 180 Km/Hrs as per IS 875. It should also included foundation PCC. for height mast including head fame, two continuous 3 run steel wire rope 8mm dia ( Grade AISI 316), tailing cable. Double drum winch galavinsed lantern carriage arrangement suitable for 6 to 9 Nos luminaries installation symmetrically and its control gear box, electric motor and manual operating handle (with both type operational), motor mounting plate, L shape, lightening arrester, Junction box, including foundation acc. the mast shall have an integral power tools installed inside the base compartment for its operation luminaries wiring martials including fixing of flood light with making all connection as specifted below:-

The specification as bottom 350 mm, top-150 mm thick, 4 mm ( bottom and top both ) section-2 Nos, length 6500 mm (Bottom),Base plate 540 MM dia, baseplate thickness -25 mm. hole dia-26mm, foundation bolt size 24 mm dia Bolt length 850 mm ,No of hole 6 Nos. Construction of suitable shallow foundation with 1:2:4 M-25 graded concrete for the high mast considering the safe soil bearing capacity at site as 10 Ton / Sqm at 2X2 m panel size, materiel protection using hot -dip galvanization through single dipping process 4 mm thickness of shaft , 180 KM/ Hrs wind pressure as per IS: 875 (pt-3) 1.25 safety factor depth with all material and labour charge and comprising all as under:- (Make : BEL or equivalent) (i) Aviation light fitting LED 302 (01 Nos) with fixing arrangement , mounting bracket not bolt washer required to be fix on tower/ steel structure as site with making all connection using three core flexible copper cable in size 2.5 Sqmm drawn through in PVC conduit pipe heavy duty medium grade inside the tower from control box to light fittings fixed on top of tower complete all as directed. Make : Bajaj (Aviation) cat No BGAV 302 LED in equivalent Wipro/ Philips (ii) Winches grooved double drum self sustaining and self lubricating by means of oil bath with luminaire mounting/ carriage fabricated by ERW steel pipe designed to act as electric conduit holes for cable entry and mounting bracket junction box , carriage will be fixed with buffer arrangement to prevent damage to the mast finish during movement, arm pully assembly winches are completely self sustaining , self lubricating by means of oil bath, grooved double drum with a gear ratio of 53:1, single gear and double gear design of winches with thimble and terminals , clamp etc all as site required operated by electrical motor and manually power complete with specified and directed. Note : Quoted rates shall be included cost of complete tools set with leather bag complete.

(iii) Air termination rod single pointed made out by copper conductor 600 MM long mounting on saddle type insulator included aluminum strip size 25mm x 3.15mm including porcelain saddles type insulator fixed on 1 Mtrs apart interval with screws / riveting/ nut bolt washer etc for mounting to strip as conductors connecting to earthing on normal ground level including test point terminal block made of gun metal or phosphorus bronze size 75 x75 x25mm drilled and screwed including 3 Nos, 8 MM dia 25mm long hexagonal head screws complete. (iv) Open raft shallow footing as per IS 456 with 2.0 safety factor , minimum 06 Bolts 30 mm dia RCC foundation bolt set comprises anchor plate with high tensile studs , mechanical properties of the studs are given in original manufacturer data sheet with safety instruction as per IS and issued by E-in- C . As foundation bolt are very important in the structural safety of the system. Note : Quoted rates shall be included cost aviation light fittings , complete lightening protection system with aluminum strip as specified etc all other required work as site to made fully functional with Deptt satisfaction complete. (ii) Flood light shall be paid against respective item of this schedule. Lantern carriage suitable to 6 to 9 Nos flood light minimum 160 W made out MS channel /tube hot -dip galvanized with rubber pad guide ring minimum 750 Kg load carrying capacity 410 RPM electric motor phosphorus bronze / EN 19 including 03 Nos of 8 MM dia of SWG wire rope non corrosive marine grade stainless steel with thembling including minimum 2 HP 220 volt single phase electric motor 410 RPM operated by remote control pendent switch complete locking arrangement anti vandal type insulated based with operating starter and making all connecting using suitable size copper cable complete all as specified and directed. Note : Quoted rates shall be included the cost of RCC foundation, Lightening protection system as per specified , aviation light , control panel with electric motor , tool kit with leather bag complete etc all required to made serviceable.

All as per above item No 16 but here-in- before height of high galvanized mast light tower in 15 Meter height remote control electric motor operated minimum 2.5 HP with control panel suitable for 6 to 9 Nos LED light 160 W minimum capacity symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope 8mm dia double drum winch with luminaire mounting arm , pully assembly aviation obstruction light with control switch and connection cable using 1.5 Sqmm x 3 core including lightening arrestor spike 600 mm long copper conductor minimum 12 mm dia fixed on saddle type heavy duty insulator and making continuously connection to earthing using 25 x4 MM aluminum strip mounting on saddle insulator apart 1 Mtr interval fixed with 1 inch long square with washer complete all as specified and directed. Note for item No 16 & 17 as under : (i) Quoted rates shall be included cost of RCC foundation in standard specification as per OEM with 1 Mtr plinth protection working space around the pole complete. (ii) Cost of copper cable 1.5 Sqmm X 3 core form control MCB to light fittings drawn through including PVC medium grade heavy duty 25mm dia of bore conduit pipe with fixing accessories for each light separately. (iii) Complete set of aviation light fittings 302 LED in red colour ( 02 year warranty to be replaced with out extra cost) and making electrical connection as above given complete. (iv) lightening protection spike with making connection in given specification of aluminum strip complete. (v) Cost of SWG rope in 8 mm dia 03 runs as per manufacturer specification. (vi) RCC foundation with bracing bolt minimum 09 Nos as per manufactures design (OEM) with 01 Mtr working space including others work all site required to made serviceable as directed.

M&L for earthing with galvanised cast iron earth plate of size 600mm x 600mmx 6mm thick burred directly in ground not less than 2.25 Mtr below normal ground level, earth plate packed on all side with charcoal mixed with salt to a thickness of 150mm connected by GI earth strip of size 32mm x 6mm thick soldered and riveted to earth plate. GI earth strip will be protected by using 50 MM bore light grade GI pipe from earth plate to high mast tower/ LT panel including flat iron clamp 25mm x 4mm including bolts nut and washers complete including watering GI pipe 20mm dia light grade 2.5 Mtr long the earthing include PCC pit including necessary earth work and disposal of surplus soil to a distance not less than 50 Mtr, chamber of PCC (1:4:8) type D2 using 40 mm graded stone aggregate, coping shall be PCC(1:3:6) type C1 using 20 mm graded stone aggregate, RCC pit cover 50 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate, reinforced with 8 MM dia TMT bar at 80 MM C/C both way in lieu of CI pit cover and angle iron frame including funnel, wire mess, GI earth wire, 8 SWG under the earth and on the pole upto height of 1.5 Mtr shall be protected by 15 mm dia GI pipe (Light grade) GI pipe to be fixed with pole by means of 2 Nos flat iron clamps 25 mm x 3 mm size. Complete with bolts, nuts, washers etc including testing and as specified and shown in electrical plate No 3 of MES SSR part -I 2009. (NOTE: 1. GI earth strip upto & including 7.5RM from the earth test point shall be deemed included in quoted unit rate. 2. GI earth strip beyond 7.5RM shall be measured and paid separately under respective items).

Supply only three core 1.0 Sqmm copper conductor flexible unsheathed cable ISI marked for using to make electic connection of light fittings in day to day complaint (in roll of 90 Mtr ) complete

Bharat Trading Company

M/S VIJAY SINGH

M/S Garg Sons

Krishna Enterprises