Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.8 LAccepted-AOC HIMACHAL PRADESH | ₹21.8 L Quoted ₹25.5 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹28.1 L+₹2.6 L (10.3%)Rejected-Finance | ₹28.1 L+₹2.6 L (10.3%) | L2 | Rejected-Finance Highest Amount |
| 3 | L3₹29.1 L+₹3.7 L (14.3%)Rejected-Finance | ₹29.1 L+₹3.7 L (14.3%) | L3 | Rejected-Finance Highest Amount |
| Sl No | Description | Qty | Unit | Ravinder Kumar L1 | DINESH AWASTHI L3 | MANJEET SINGH RANA L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches (for pipes and pits) up to all depths and in all clasification of earth work such as pick Work, jumper work, chiselling or Wedging out of soft and hard rock where the blasting work is prohibited saturated soil including pumping or bailing out water in all lifts including trimming and dressng of sides, levelling of beds to correct grade including shoring strutting planking timbering and dewatering where ever required. Stacking usable and unusable matrial/soil separetaly and after laying, jointing and testing of pipes (for pipes, pipe duct, chambers, x-signs etc.) returning the usable soil in 15 cm layers by ramming and wetering and then desposing of all surlus excavated soil/un usable material as directed wirhin all leads/lifts includng restoration of unmetalled surfaces to its original conditionn and includng cost of divresion for traffic, night signal boards, fixing custion boards, crossing over tranches for access to houses, fencing etc. complete in all respect as per the direction and to be entire of Engineer-in-Charge within all leads and lifts. (Pick work & jumper work) | 67.5 | Cum | 350 ₹23,625 Lowest | 500 ₹33,750 | 375 ₹25,312.5 |
| 2.00Providing, laying, jointing & testing of bevelled ended MSERW pipe (Zinc Coated) 4.80mm thick with MS Flange (6%) Table-5 and other pipe (94%) with circumfrential butt welded joints by electrical arc welding ( welding thickness shall be equal to pipe wall thickness) and testing of pipe of Jindal/Surya Roshni/Tata/AST make of following dia meters conforming to IS/ISO 3183:2007 with steel grade L-210 or A, having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and febrication of reducers/ tapers , all short pieces, bends etc. as per site requirement made from parent tubes . The laying of pipe shall include all operations such as cutting, welding, jointing, fabrication of bends, tees, making bevelled pipe ends suitable for butt welding , lowering & laying in excavated trenches to ensure required level complete in all respects to the best satisfaction of the Engineer-in-charge (Earth work in trenches and the cost of providing and welding flanges i/c nut & bolts, gasket will be measured and paid for separately) . The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The damaged portion of the pipes ( If damaged during laying & jointing operation of pipe) and all other specials made from the parent tube shall be provided with anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing of pipes, D.P. test of butt welded joints complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. | ||||||
| 2.01 | 300mm dia | 250 | Rmt | 7,500 ₹18,75,000 Lowest | 8,000 ₹20,00,000 | 7,900 ₹19,75,000 |
| 3.00Providing and Fixing of double flanged Cast iron Sluice Valve of following dia Leader/Kirlosker Make (with hand wheel) PN-1.6 as per BIS Code-14846-2000 with standing nominal seat pressure latest upto date ammendments and it shall also include carriage of materials complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts. | ||||||
| 3.01 | 300mm dia | 2 | Nos | 1,75,000 ₹3,50,000 Lowest | 2,50,000 ₹5,00,000 | 2,05,000 ₹4,10,000 |
| 4.00Providing and replacement of double flanged Cast iron Non Return Valve of following dia Leader/Kirloskar make PN-1.6 as per IS Code-5312-2000 with standing nominal seat pressure latest upto date ammendments and it shall also include carriage of materials complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts. | ||||||
| 4.01 | 300mm dia | 2 | Nos | 1,50,000 ₹3,00,000 Lowest | 1,90,000 ₹3,80,000 | 2,00,000 ₹4,00,000 |
Tender Value
₹19.9 L
EMD Value
₹39,800
Closing Date
22 Jul 2026, 11:00 amClosed
Er. Vivek Thakur EE
JSV Division Nagrota Bagwan Distt Kangra (HP)
AR and MO LWSS Dr.RPGMC Tanda in Tehsil Nagrota BagwanSH L/J and testing of MSERW Pipe 300 mm dia
2026_HPIPH_139040_1
EE/JSV/NBD/4606-57 dt15.07.2026
Open Tender
Civil Works
Item Rate
90 days
Nagrota Bagwan
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹39,800
25 Aug 2026
15 Jul 2026
22 Jul 2026
15 Jul 2026
22 Jul 2026
15 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches (for pipes and pits) up to all depths and in all clasification of earth work such as pick Work, jumper work, chiselling or Wedging out of soft and hard rock where the blasting work is prohibited saturated soil including pumping or bailing out water in all lifts including trimming and dressng of sides, levelling of beds to correct grade including shoring strutting planking timbering and dewatering where ever required. Stacking usable and unusable matrial/soil separetaly and after laying, jointing and testing of pipes (for pipes, pipe duct, chambers, x-signs etc.) returning the usable soil in 15 cm layers by ramming and wetering and then desposing of all surlus excavated soil/un usable material as directed wirhin all leads/lifts includng restoration of unmetalled surfaces to its original conditionn and includng cost of divresion for traffic, night signal boards, fixing custion boards, crossing over tranches for access to houses, fencing etc. complete in all respect as per the direction and to be entire of Engineer-in-Charge within all leads and lifts. (Pick work & jumper work) | 67.5 | Cum | - | - |
| 2Providing, laying, jointing & testing of bevelled ended MSERW pipe (Zinc Coated) 4.80mm thick with MS Flange (6%) Table-5 and other pipe (94%) with circumfrential butt welded joints by electrical arc welding ( welding thickness shall be equal to pipe wall thickness) and testing of pipe of Jindal/Surya Roshni/Tata/AST make of following dia meters conforming to IS/ISO 3183:2007 with steel grade L-210 or A, having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and febrication of reducers/ tapers , all short pieces, bends etc. as per site requirement made from parent tubes . The laying of pipe shall include all operations such as cutting, welding, jointing, fabrication of bends, tees, making bevelled pipe ends suitable for butt welding , lowering & laying in excavated trenches to ensure required level complete in all respects to the best satisfaction of the Engineer-in-charge (Earth work in trenches and the cost of providing and welding flanges i/c nut & bolts, gasket will be measured and paid for separately) . The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The damaged portion of the pipes ( If damaged during laying & jointing operation of pipe) and all other specials made from the parent tube shall be provided with anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing of pipes, D.P. test of butt welded joints complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. | |||||
| 2.01 | 300mm dia | 250 | Rmt | - | - |
| 3Providing and Fixing of double flanged Cast iron Sluice Valve of following dia Leader/Kirlosker Make (with hand wheel) PN-1.6 as per BIS Code-14846-2000 with standing nominal seat pressure latest upto date ammendments and it shall also include carriage of materials complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts. | |||||
| 3.01 | 300mm dia | 2 | Nos | - | - |
| 4Providing and replacement of double flanged Cast iron Non Return Valve of following dia Leader/Kirloskar make PN-1.6 as per IS Code-5312-2000 with standing nominal seat pressure latest upto date ammendments and it shall also include carriage of materials complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts. | |||||
| 4.01 | 300mm dia | 2 | Nos | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
Form6.pdf
Tender Documents • 1.34 MB
Termsandconds.pdf
Tender Documents • 0.22 MB
BOQ_205967.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .