Supply and fixing of Concertina Coil fencing on outer peripheral boundary of Pocket A and B Signage direction board and Golden stainless steel letters on Entrance Gates at SEZ Moradabad

Amount

Dismantling of brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cement concrete with 20mm gauge stone grit, coarse sand and cement in propoortion 4:2:1 including supply of all materials, labour and T&P etc, required for proper completion of work.

M-150 brick work in 1:3 cement and coarse sand mortar in S/S including supply of all materials, racking the joints, labour tools and plants etc, required for proper completion of the work including making of groove in plaster surface.

12 mm thick plaster with one part cement and four parts of approved coarse sand including supply of all materials, labour and T&P etc, required for proper completion of work including making of groove in plaster surface.

Pebble dash plaster upto 10m height above GL with a mixture of washed pebble or crushed stone grit 6mm to 12.5mm nominal size, dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 aand top layer 10mm cement plaster with cement mortar 1:3 mixed with 10% finely grounded hydrated lime by volume of cement including supply of all labour, material & T&P etc for proper completion of work

Mild steel or iron work in heavy sizes such as trusses; built up gates, door, frames, record racks, roof work, gates etc, wrought to required form including drilling holes. Rivetting or welding where necessary and also including supply of all materials, labour and T&P etc, required for proper completion of the work.

Finishing wall with two coat of water proof proof cement paint Weather coat of approved quality on proviously old treated surface with this paint to give an even shade including supply of all materials, labour and T&P etc, required for proper completion of work.

Painting with synthetic enamel paint on new iron work or wood work with one coat of ready mixed priming paint and two coats of approved superior quality (British, Asian of equivalent make) read mixed paint rf varnish including supply all materials, labour and T&P etc, required for proper completion of the work.

Providing and fixing concertina coil fencing with punched tape Concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing and fixing double scaffolding system (cup lock type ) on the exterior side upto seven story height made with 40 mm dia M.S.tube 1.5 m centre to centre, horizontal & vertical tubes. Joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviccable condition for the required duration as approved and removing it there after the scaffolding system shall be diffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- charge . The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Supply and fixing of Golden Stainless steel English & Hindi Alphabet of 450mm height and 25mm raizing made from 0.8mm thick & 304 grade Golden Stainless steel sheet with fixing arrangement on Marble stone surface upto a average height of 10 m. Rate will include cost of material, fixture, locks, screw and all necessary bending and including cost of fasteners if required including fixing charges with supply of all materials, labour and T&P etc, required for proper completion of the work as per direction of engineer in charge excluding cost of padding & scaffolding.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in kitchen platforms, vanity counters, window sills, facias, footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. including rubbimg, curing, moulding and polishing to edges to give high glossy finish etc, complete as per direction of Engineer-in-Charge.

Desilting of drains in foul condition or Earth work in excavation in local soil & mud including lift above 1.50M with additional lift of 1.50m or part of 1.50m and including disposal of rubbish outside of Industrial Area as directed by the Engineer Incharge upto a distance after 3km from the excavation spot.

Providing, fixing & Hoisting of 6.0-7.0 m Cantilever span Overhead Structure in position with one vertical posts of 6.00 m clear height from top of RCC foundation made of 300 mm dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners & two nos. 10 mm thick MS plates at top weledd with structure of 40 mm NB (M) pipe compnsing of horizonta, vertical pipe of 40 mm NB (M) and bracing pipe of 32 mm NB (M) as per structural design requirements and approved drawing with vertical and lateral clearance including one coat of primer & two coats of synthetic enamel paint on the whole structure and installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete with 1:4:8 and RCC 1:2:4 with cement, co. sand and 20 mm grit complete for fixing the complete structure in position as per direction of E/l charge with 7 years warranty, including supply of all materials, labour, fabrication,transportation and erection of the sign board and also inclusive all taxes, royalty & GST etc, required for proper completion of the work Note: The vertical & lateral clearance shall be governed as given in clause 802.2 & 802.3 And whole structure should be installed as per clause 802.7 over a designed support system. The composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp paper of required denomination for complete structure.

Supply & Fixing of Retro-reflective sign board made up of 2 mm thick alluminium sheet, face to be fully covered with 3M High Intensity Prismatic reflective sheeting series 3930, letter/ symbols shall be made of same retro reflective sheeting requirement bounded with lines type Retro Reflective sheeting as per colour approved which shall be cutted by computerized matter cutting machines and fabricated out of H.I.P. grade 3M Retro Reflective board are to be supplied along with back support frame of MS angle size 35x35x5 mm thick with proper clamping arrangement. Back side of the alluminium sheet shall be painted with stove enamel paint as per direction of Engineer in charge with 7 years warranty, including supply of all materials, labour, fabrication,transportation and erection of the sign board and also inclusive all taxes, royalty & GST etc, required for proper completion of the work

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Cement concrete with 20mm gauge stone grit, coarse sand and cement in propoortion 3:1.50:1 in CC pavement thickness as per design with 43 grade cement or any type as per clause 1501.2.2, coarse & fine aggregate confirming to IS standerd mixed in concrete mixture/ plant of ot less then 0.2 cum capacity laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, and finished in continuous operation including hassion cloth for curing for concrete pavement for not less then 14 days including supply of all materials, labour and T&P etc, required for proper completion of work.

SHRI FAHEEMUDDIN

M/S IT CONSTRUCTION & GOVT SUPPLIER