Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | ₹2.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹2.5 LRejected-AOC MUKALEL HOUSE KUMILY | IDUKKI | KERALA | 685501 | ₹2.5 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | MANSOOR P.A L1 | Jomy Mathew L2 |
|---|---|---|---|---|---|
| 1.00Toilet and other necessary facilities | |||||
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 0.9 | cum | 257 ₹231.30 | 260 ₹234 |
| 1.00 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 0.67 | cum | 6,809 ₹4,575.65 | 6,809 ₹4,575.65 |
| 1.00 | 50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. | 0.45 | cum | 445 ₹201.14 | 445 ₹201.14 |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.47 | cum | 7,932 ₹3,751.84 | 7,932 ₹3,751.84 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 12.6 | sqm | 369 ₹4,649.40 | 369 ₹4,649.40 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 364.35 | kg | 187 ₹68,133.08 | 187 ₹68,133.08 |
| 1.01 | OD300930/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | 27 | sqm | 621 ₹16,767 | 621 ₹16,767 |
| 1.01 | OD300951/2025-2026:Supplying and installing Premium Portable Toilet EWC - Poly Ethelene HDPE Premium / Executive model Cabin size 3.7*3.7*7.5 Feet / weight of the cabin 85 kg - Western Closet with Flush tank, health faucet, Wash basin, Ventilation, and LED bulb Holder The accessories including transportation, delivery at site and installation | 2 | each | 52,267 ₹1.0 L | 52,267 ₹1.0 L |
| 1.01 | OD308393/2025-2026:Supplying and fixing Motor - Mono Block 1HP (1*1) | 1 | no | 9,872 ₹9,872 | 9,872 ₹9,872 |
Tender Value
₹2.5 L
EMD Value
₹6,355
Closing Date
29 Sept 2025, 3:00 pmClosed
AE Erattupetta Municipality
O/o The AE Erattupetta Municipality
Annual Plan-Erattupetta Municipality Project No 377/25-26-Providing temporory toilet facilities to Private Bus Stand in ward 20 (3L)
2025_LSGD_800642_1
E2-2508771/25 Dt 22-09-2025
Open Tender
Civil Works - Buildings
180 days
Erattupetta Municipality
Please refer Tender documents.
9 documents required · 9 mandatory
₹560
Yes
₹6,355
Yes
15 Dec 2025
22 Sept 2025
30 Sept 2025
22 Sept 2025
29 Sept 2025
22 Sept 2025
Amount
Toilet and other necessary facilities
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD300930/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
OD300951/2025-2026:Supplying and installing Premium Portable Toilet EWC - Poly Ethelene HDPE Premium / Executive model Cabin size 3.7*3.7*7.5 Feet / weight of the cabin 85 kg - Western Closet with Flush tank, health faucet, Wash basin, Ventilation, and LED bulb Holder The accessories including transportation, delivery at site and installation
OD308393/2025-2026:Supplying and fixing Motor - Mono Block 1HP (1*1)
51.19.ST4:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)<br> 4. 35 to 50 flush capacity
Jomy Mathew (BID ID -2364668)
Bidder Name
Jomy Mathew
MANSOOR P.A
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
