Construction of Mini pipeline at Village Shivarimal Ashramshala.Tal.Waghai Dist. Dang

Name of work: Mini Pipeline at VillageShivarimal Ashramshala.Tal.Waghai. Dist. Dang

Memorandum showing items of works to be carried out

It. No. Quantities Item of work Estimated Unit Total

estimated but Rates Amount

may be more or according

Drilling of Bore

183.00 Mtr Drilling of 215mm dia. Bore in over burden strata (0- 271.00 Mtr

30) including lowering and fixing of 175 mm

nominal dia UPVC pipe/175 mm dia ERW pipe upto

1 required depth and further drilling of 165mm dia

bore hole in rocky strata by DTH rig.. a) For Ta.

20.00 Rmt Manufacture, supply & delivery of ISI marked UPVC 906.00 Rmt

Casing pipe (IS 12818 with latest

2 amendment. (Rates are exclusive of GST)

(c) 175.00 mm nominal dia. " CS " Type

1.00 No. Providing boreplug having 100mm height made 654.96 No.

from M.S. plate with 3 holes at equivalent distance

3 on circumference for nut-bolt type , locking

arrangements with nut bolts suitable for 175mm dia

2.00 Hrs. Development of above mentioned bore by air 2719.00 Hrs.

compressor 400 CFM/100PSI

1.00 No. Geophysical & geohydrological ground water 14286.00 No.

5 investigation for finalisation of one pin point

including vehicle charges

Construction of Otta Plateform

7.532 Cmt Excavation for foundation upto 1.5 mts depth 132.81 Cmt

including sorting out and stcking of useful material

and disposing the excavated stuff upto a lead of

50mtr. in loose or soft soil.

1.612 Cmt Providing and laying cement concrete 1:5:10 (1- 1699.11 Cmt

cement : 5-fine sand : 10-graded brick aggregates

2 mm nominal size) and curing complete excluding

cost of formwork in foundation and plinth …

9.008 Cmt Brick work using common burnt clay building bricks 2525.09 Cmt

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:6 (1-

-fine sand)(B) Conventional

1.184 Cmt Providing and laying cement concrete work 1:2:4 (1- 3247.81 Cmt

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

4 complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass

4.613 Cmt Filling in foundation and plinth with murrum or 192.45 Cmt

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

2.331 Cmt Filling available excavated earth (excluding rock) in 80.71 Cmt

trenches. plinth, sides of foundations etc. in layers

not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

17.49 Smt Providing 15 mm thick Cement plaster in single coat 116.25 Smt

onRough(Similar) side of single or Half brick walls

7 for interior plastering upto floor two level and

finished even and smooth in Cement Mortar 1:3( 1-

Cement, 3-Sand)

Supplying at site of work MS reinforcement of varios

dia including Rly, frieght, loading, unloading,

Cuttinginsurance charges etc.complete

0.4287 Qtl 1) TMT bars Fe-415 IS mark - 10 mm 4660.71 Qtl

0.1065 Qtl 2) MS bars IS mark - 6 mm 4077.68 Qtl

0.5352 Qtl Labour charges for fabricationg in position MS/ 937.53 Qtl

deformed bars reinforcement of various dia.

Including cutting, bending, binding with 16 gauge

9 wire, hooking, overlapping, scraping etc. complete

for water retaining and water treatment structure &

their related structure including cost of binding wire.

150 Each Writing Letter ( Office Name -Prog.-Year ) 1.88 Each

Providing and Fixing Rotational moulded Polythylene water storage tank.

Supply, Delivery & fitting at site of ISI marked HDPE

Storage Tank - Rotational moulded Polythylene

water storage tanks with close top with IS 12701 /

1996 with latest ammendmend No.1. The tank

should be manufactured from pollythelene as per IS

figlin 1 of IS : 12701/

Fittings for PVC tank

Providing & Supplying ISI mark GI Pipes medium

duty with couplings incl. all taxes, insurance,

transportation, freight charges, octroi, insp.

Charges, loading, unloading, coveyance to site

stacking etc. complete as per IS

12.00 Mtr 1) 50 mm dia medium duty GI Pipes with coupling 369.00 Mtr

2 Nos Providing & fixing 50 mm gun metal check or non 821.00 No.

return full-way wheel valve

Supply of 32mm/ 50mm dia specials for Jointing

pipe line as per actual requirement as under :

4 2 Nos 1) 50 mm dia C.I.Flange set with rubber packing 510.00 No

16.107 Kg. 4) GI Special like ( GI Elbow , GI Union,GI Nipple, GI 71.76 Kg.

Tee , GI Reducer for size 50 mm dia

Lowering, Laying & jointing G.I.Pipes with

G.I.specials of following diameter in proper position

in grade & alignment as directed by engineer-in-

5 charge including conveyance at site of work, labour,

giving hydraulic testing etc.complete ..

12.00 Mtr 50mm dia medium duty GI Pipes 19.80 Mtr

Rising Main/Gravity Main 63mm / 50mm / dia. HDPE Pipe line

1 1.00 Job Lowering of Submersible motor pump set complete 900.00 Job

with required lenghth of HDPE pipe, cable in

boreweell and fitting of control panel board

including wiring work and satisfactory testing as per

instruction of engineer- in charge at different vilages

of valsad district including carting/ loading of

material to site. (90mtr to 150 mtr)

2 1.00 No Providing & erecting 240 V MCB double pole switch 245.54 No

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having capacity 32 Amp … Cat.II

3 1.00 Job Electrical wiring & fitting charges of elctric meter , 2500 Job

32 Amp fuse, control panel etc. including errection

of the above items on wooden board, cost of

material and all liasioning work for getting electric

connection from concerned Vij Company….

4 1.00 Job Providing and fitting readymade prefabricated 12187.50 Job

portable chemicalized ferroconcrete mini panel

having outer size 110 x 50 x 190 cm with necessary

fitting for electic panel mounting complete as per

detailed specification and drawing.

5 Excavation for pipeline trenches including all safety

provisions using site rails and stacking excavated

stuff upto a lead of 90 mtr. clearing the sit etc.

complete for lifts & strata as specified ..

104.00 Cmt (a) In all sorts of soil & soft murrum - upto 1.5 mtr 97.90 cmt

6 Lowering, laying & jointing of HDPE pipeline and

specials of following class and diameters(By but

fusion welding method) including cost of

conveyence at site of works including cost of labour,

material giving satisfactory hydraulic testing etc

0.00 Rmt a) 40/50 mm dia 4.4 Rmt

290.00 Rmt b) 63mm dia 5.50 Rmt

7 Providing & Supplying ISI mark GI Pipes medium

duty with couplings incl. all taxes, insurance,

transportation, freight charges, octroi, insp.

Charges, loading, unloading, coveyance to site

stacking etc. complete as per IS 139/1990

10.00 Mtr 32 mm dia. Medium duty GI Pipes with coupling 236 Mtr

8 Supply of 15mm / 32 mm dia specials for Jointing

pipe line as per actual requirement as under :

1 No. 1) 40mm dia MS Pipe Clamp with fitting accessorries 519 No.

0 No. 2) 175mm x 40mm Bore cap in two Halves with 547.00 No.

1 No. 3) Submerssible coupler for jointing of sub pump & 340.00 No.

5 No. 4) Teflon tape 37.00 No.

5.00 Kg. 5) GI Special like ( GI Elbow , GI Union,GI Nipple, GI 71.76 Kg.

Tee , GI Reducer for size 32 mm,40 mm,50 mm dia

3.00 Kg. 6) CI Special like ( CI Plug for size 32 mm) 58.00 Kg.

9 103.096 Cmt Refilling the pipe line trenches including ramming, 24.2 Cmt

watering, consolidating, disposal of surplus stuff as

directed within radius of 3 Kms.

10 57.64 Sq. Mtr Distempering (Two Coats)with Oil Bound washable 42.38 Sq.

Distemper of Approved Brand and Manufacture and Mtr.

of required shade on wall surfaces/ other GWSSB

works/ PVC Tank to give an even shade over and

including a priming coat with alkali resisting primer

of approved brand after throughly brushing the

surface and other foreign matter and also including

preparing the surface even and sand parpered

Material Utilised in Scheme supplied by agency

1 Set a) Providing & Supplying Single phase submersible 16022.00 Set

pump motor set with control panel having

undervoltage, overvoltage and dry run protection,

Cat Q:1.5 20 LPM/180 mtr. 3 HP as per detailed

technical specification (Pumps should generally

confirm to IS : 8034 and motors should confirm to

IS:9283 revised)

MOC: Casing: CI-FG260, Impeller : Bronze & Shaft :

180.00 Mtr PVC insulated flat submersible cable as per detailed 87.00 Mtr

technical specifications of R/C of GWSSB conforming

200.00 Mtr Manufacture, Supply and delivery of following ISI 55.00 Mtr

marked H.D.P.E. Pipes (IS:4984/1985 with latest

amendment) having material Grade PE-80 in

approximate 100 mtr. Coil length or as per GWSSB

3 requirement with SS-316 Nipple at both end having

11 TPI threading as per specification, press fitted

and bolted having nominal diameter as under as per

detailed technical Specification.

300.00 Mtr Providing and supplying in standard length ISI mark 83.00 Mtr

high density Polyethylene H.D.P.E. Pipes suitable for

potable water as per IS specification no. 4984/1995

including all local and central taxes, transportation,

freight charges, octroi,inspection charges, loading,

unloading, conveyance to the dept. stores etc. comp.

1) 63 mm dia. HDPE -6 Kg/cm2

0.00 Mtr Manufacturing supply & delivery of ISI marked (IS 906.00 Mtr

5 with latest amendment ). Rates are exclusive of GST

175.00 mm nominal dia " CS " Type

1 Job GEB FQ paid for electricity connection for single 5000.00 Job

phase sub pump motor set

( Rupees ThreeEighty Seven Thousand Three Hundered ninty two and Fourty one paise Only)

I/We am/are willing to carry out the work at ________________ % above/below ( percent should be

written in figures and in words ) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

put to tender Rs. _____________ put to tender Rs. _______________

Deduct ____ % below Rs. _________ Add ____ % above Rs. _________

Net Rs. _________ Total Rs. _________

*( Please strike out which ever is not applicable )

Note 1:- The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

Note 2 :- The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills

Signature of Bidder ExecutiveEngineer

Water Supply PIU/PMU Division