RRD of LWSS Jukhala in Tehsil Sadar District Bilaspur (SH Repair and renovation of AE office room at Sub_Division office Jukhala)

Amount

Demolition of brick work above G.L.upto floor two level includingstacking of serviceable materials and disposal of un-serviceablematerials within 20 Metres lead

Excavation in foundation and trenches etc. in earth work in all lifts in all kinds of soil such as pick work, jumper work, blasting work in soft/hard rock chiseling/wedging out of rock) where blasting is prohibited saturated soil including bailing/pumping out of water stacking the excavated soil in 15cm layers, when required into plinths, sides of foundation etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:5:10(1cement:5sand: 10 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts

Random rubble masonry/polygonal rubble masonry (un coursed brought to coursed in wall with hard stone of approved quality in foundation and plinth including leveling up with cement concrete in 1:6:12(1cement:6sand: 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6(1cement:6sand)in all leads and lifts

Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in 2nd class bricks with cernent mortar 1:6 (1cement:6sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge

P/F Pressed steel door frames manufactured from commercial M.S. sheet f 1.25mm thickness i/c hinges jump lock jambbeed and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split and tail to each jamb including steel but things 2.5mmthick Profils-"A"

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc.with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain concrete work in.

Flat surfaces such as soffits of suspended floor landings and the like up to 200mm thickness and to the entire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete work 1:1.5:3 (1cement:2sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in

Suspended floors roofs, landings supports and their supports balconies beams, girders bressumers and cantilever upto floor two level in all leads and lifts.

Providing mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel in all leads and lifts.

15mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamfer and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3 (1cement:3sand) in all leads and lifts.

6mm plaster to ceiling as in cement mortar 1:3(1cement 3sand) in all leads and lifts.

Boulders filling behind the retaining wall also under floor and upstream of l/gallery/ under floor etc. in all leads and lifts and to the entire satisfactionof the Engineer-in-charge

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thicknessto be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete,

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 oarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85 G with wire of dia 0.56mm for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws 40mm thick

Providing and fixing aluminium, tower bolts (Barrel type) with necessary screw etc, complete in all leads and lifts

Providing and fixing anodized aluminium.handles with necessary screws etc. complete

100 mm dia

Providing and fixing at all height wall panelling with pre finished pine wood wall panel having size 5' inch width and 10 feet length conforming to relevant IS code including providing and fixing to frame work made of required size and material including making good the wall etc. and the work asio includes providing and fixing wooden moulded corner beading of required shape to the junction of panelling and at other required place etc. with all items complete as per direction of Engineer-in-Charge.

Falce ceiling with wooden panelling of pre finished pine wood panel having size 5' inch width and 10 feet length conforming to relevant IS code including providing and fixing to frame work made of required size and material including making good the wall etc. and the work aslo includes providing and fixing wooden moulded corner beading of required shape to the junction of panelling and at other required place etc. with all items complete as per direction of Engineer-in-Charge,

Polyurethelene polishing of approved brand such as Sirca/Asian Paints with glossy finish on wood work comprised of pine wood panelling having finished surface (Min. Three coats). Both for wall and ceiling

Providing and fixing vitreous china wash down water closet (Europian type) one piece seat i.e. Including flushing cistern with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement: 1 sand)

Providing and fixing vitreous china wash basin with pedestal having single hole for pillar tap with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fittings. Flat back 550x400 mm

Providing & fixing C.P. Brass waste for wash basin or sink 32 mm dia

Providing and fixing 32 mm dia, lead waste pipes for wash basin or sink including Brass check nut 32 mm dia

Providing & fixing Brass bib cock having long nose (Superior or heavy quality) 15 mm dia

Providing & fixing Brass piller tap with capstan head 15 mm dia

Providing and fixing brass stop cocks 15mm dia

Providing and fixing soaptray (Viterous china)

Providing & fixing CP Brass towel rail complete with CP brass bracket fixed in wooden plug with CP brass screws 750mm x 20mm size.

Providing and fixing to wall ceiling and floors galvanised mild steel tube Medium Glass) tube fittings and clamps including making good the wall ceiling and floors 15 mm nominal diametres

Providing and laying in position 100 mm dia PVC pipe having class 40 Kg/cm2 including fittings complete in all respect.

Providing and fixing exhaust fan having size 300mm

Providing and fixing brass fullway valve with wheel, Approved make having size 15mm

Providing and fixing 600x450mm bevelled edge mirror of superior glass marked on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screws and washer.

Providing and fixing health faucet of approved make complete in all respects

Manoj Kumar (BID ID -592428)

Pawan Kumar (BID ID -593492)