Providing lighting, water supply and other facilities to Christain Burial Ground near Srinivasa theatre, in Ward No.8 of Tuni Municipality.

Dismantling of existing structures comprising of Cement Concrete including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceble material and stacking the serviceble material with all lifts and lead of 1000m as per technical specification as per SS and as directed by the departmental officer in charge of the work

Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd class. The rate including cost and conveyance of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Plastering with CM (1:4), 12 mm thick including cost and conveyance of all materials and labour charges etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete

Filling Dust in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH. The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

PCC (1:4:8) mix using 40mm size HBG metal including cost and conveyance of all materials and labour charges for mixing machine mix, etc., complete as per SS and as directed by the departmental officer incharge of the work. But excluding seigniorage charges.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.etc., complete as per s.s and as directed by the departmental officer in charge of the work. but excluding seigneorage charges.

Flooring with chequrred terrazzo tiles of 22 mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, ias per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables 3C x 6 sq.mm of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc including cost and conveyance of all materials ,overheads & contractors profit etc., Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/Orbit/ Paragon/RR Kabel /RPG /Rhino /Pawancab/AKG/LS cable/ Polywires.(ELEC-4.1.6)

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 12 mtrs height Pole having dimensions Bottom 240mm, Top 100mm with 4mm thick, base plate 320 x320 x20mm and 4 Nos of M24 x 850 long 'J' bolts along with template. including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work. Makes: Bajaj / Valmont/Laasma//Transrail/Utkarsh/ Skipper/Consoul/Surya/Vakrangee/Lysaght Pole-ELEC-6.1.7.

Foundation and erection charges with special T&P, for 12Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.67Mtr x 0.67Mtrs x 1.50 Mtr size M20 cc work vibrated concreting mixing withnecessary steel (20kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete. including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work Makes: Bajaj / Valmont/Laasma//Transrail/Utkarsh/ Skipper/Consoul/Surya/Vakrangee/Lysaght Pole- ELEC-6.1.32

Supply and transportation of 120 W LED Flood light Luminaire made of pressure diecast aluminium housing with powder coated, having protective toughened glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK08, Driver surge protection 4KV, external Surge protection ≥ 10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj/Greenlites / Havells/Capart(Premium) /Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya (Livia Pro) / FortuneArrt (Fin)/ Rhino(GPFL02 Series) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.-ELEC-3.8.27

Supply and transportation of 20 W LED Street light Luminaire made of pressure diecast aluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 110 lm/W and junction temprature < 70°C, with Ingrees protection IP66, IK07 Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) / Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/Keselec/ HPL(City Vision)/ Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf) / Rhino(GPSL04) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG-ELEC-3.8.23

Supply and fixing of suitable out door type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F of Legrand / Schneider / L&T make 40-63A FP MCB, 9 Nos SP MCB's, din Chanel , bus bars, 6 Sqmm 3 core copper cable for internal wiring , contactor, connectors and provision for energy meter, and including all labour charges , cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work.-ELEC-6.1.25

Supply & fixing overhead shower rose with revolving jointand 150 mm long swivel shower arm with 7 years warranty:Chrome plated

Supply and Fixing 12.7 mm NP stop cock Indian makeheavy duty.The rate including cost and conveyance of all material, incidental charges etc., complete as per SS and as directed by the departmental officer incharge of the work. (BMW-E.01)

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007)

Assistant Engineer

Tuni Municipality