Supply, Installation, Testing and Commissioning of Electrical equipment for TREndS complex at BARC,Atchutapuram, near Visakhapatnam, Andhra Pradesh.

Fill in the yellow part of the Form – ‘A’ and upload in Excel file. Other documents to be scanned and uploaded.

FINANCIAL INFORMATION

I. Financial Analysis - Details to be furnished duly supported by figures in balance sheet/ profit and loss account for the last five years duly certified by the Chartered Accountant, as submitted by the applicant to the Income Tax Department (copies to be attached).

Particulars Financial Year

i) Gross Annual turnover

Rupees (In Lakhs)

Rupees (In Lakhs)

iii) Certified by

Name and address of Chartered Accountant

II. Financial arrangements for carrying out the proposed work.

Viz. line of credit, Working Capital, Liquid Capital, Fixed Deposits etc. - Upload scanned copy of statement

III. The following certificates are enclosed: - Upload scanned copy of certificates

(a) Profit & Loss account certified by CA & as submitted to Income Tax Department.

(b) Solvency Certificate from banker’s of applicant. Banker’s certificates should be on letterhead of the Bank. In case of partnership firm, certificate should include names of all partners as recorded with the Bank as said in the Form ‘B’.

(c) Value Added Tax Registration Certificate.

Name of authorized signatory

Note: Further details if required may be asked from the contractor after opening of the bids. There is no need to upload the entire voluminous balance sheet.

To be typed on the letter head of bank, signed by banker, Scanned and uploaded.

FORM OF BANKER’S CERFIFICATE FROM A SCHEDULED BANK

This is to certify that to the best of our knowledge and information that M/s / Shri _________________________ ( with address ) a customer of our bank are / is respectable and can be treated as good for any engagement upto a limit of ` _________________ (Rupees _______________ ________________________).

This certificate is issued without any guarantee or responsibility on the bank or any of the officers.

(1) Bankers certificates should be on letter head of the Bank.

(2) In case of partnership firm, certificate should include names of all partners as recorded with the Bank.

Fill in the yellow part of the Form – ‘C’ and upload in Excel file. Other documents to be scanned and uploaded. Please see upto end of document.

DETAILS OF ALL SIMILAR WORKS COMPLETED IN ALL RESPECTS DURING THE LAST SEVEN YEARS ENDING ON THE LAST DAY OF THE MONTH PREVIOUS TO THE ONE IN WHICH APPLICATIONS ARE INVITED

Sr. No. Name of work /project and location Owner or spons-oring organis-ation Cost of work Rupees Date of comm.-ence-ment as per contract Stipulated date of completion Actual date of completion Litigation /arbitration pending /in progress with details* Name & Address / Phone No. of officer to whom reference may be made. Remarks

* Indicate gross amount claimed and amount awarded by the Arbitrator.

a. Applicant may submit separate form for giving details of work (completed) for each year to fill up the details as above. Separate sheets if any shall be numbered in sequence.

b. The scanned copies of the work orders for each work along with completion certificate shall be uploaded.

c. Certified that the above list of works is complete and no work has been left-out and the information given is correct to my knowledge and belief.

Name of authorized signatory

Fill in the yellow part of the Form – ‘D’ and upload in Excel file. Please see upto end of document.

Name of Firm FORM 'D'

PROJECTS UNDER EXECUTION OR AWARDED

Note:-Applicant shall fill the details of each project (in progress/awarded. Certified that the above list of works is complete and no work has been left-out and the information given is correct to my knowledge and belief.

Sr. No. Name of work /project and location Owner or spons-oring organis-ation Cost of work Rupees Date of comm.-ence-ment as per contract Stipulated date of completion Actual date of completion Litigation /arbitration pending /in progress with details* Name & Address / Phone No. of officer to whom reference may be made. Remarks

Name and address of the authorized signatory

Certificate containing the matter of Form – ‘E’ to be typed and signed by the client, scanned and uploaded.

PERFORMANCE REPORT OF WORKS REFERRED TO IN FORM "C" & "D"

(Separate certificate for each work/ Project)

1. Name of work/Project & Location

2. Agreement No.

3. Estimated Cost

4. Tendered Cost

5. Date of start

6. Date of completion

(i) Stipulated date of completion

(ii) Actual date of completion

(iii) Present position of work, if in progress.

7. Amount of compensation levied for delayed completion, if any.

8. Amount of reduced rate items, if any.

9. Performance Report.

(1) Quality of work Very Good/Good/Fair/Poor

(2) Financial soundness Very Good/Good/Fair/Poor

(3) Technical Proficiency Very Good/Good/Fair/Poor

(4) Resourcefulness Very Good/Good/Fair/Poor

(5) General behaviour Very Good/Good/Fair/Poor

(6) Time Consciousness Very Good/Good/Fair/Poor

Dated: Executive Engineer / Project manager or equivalent

Signature with Seal

Fill in the yellow part of the Form – ‘F’ and upload in Excel file.

STRUCTURE & ORGANISATION

1 Name & Postal Address of the applicant:

2 Telephone No./Email ID.

3 Legal status of the applicant (Please tick and attach attested copies of original document defining the legal status)

(a) An individual; (b) A proprietary firm; (c) A firm in partnership

(d) A limited company or Corporation

4 Particulars of registration with various Government bodies (attach attested photocopy)

Dept./Organisation & Place of registration Registration No.

5 Names and Titles of Director & Officers with designation proposed to be concerned with this work

6 Designation of individuals authorised to act for the organisation

7 Was the applicant ever required to suspend construction for a period of more than six months continuously after you commenced the construction? If so, give the name of the project and reasons of suspension of work.

8 Has the applicant or any constituent partner in case of partnership firm, ever abandoned the awarded work before its completion? If so, give name of the project and reasons for abandonment.

10 Has the applicant, or any constituent partner in case of partnership firm , ever been convicted by a court of law? If so, give details.

11 In which fields of Engineering construction the applicant has specialisation and interest?

12 Any other information considered necessary but not included above.

Name and address of authorized signatory

Fill in the yellow part of the Form – ‘G’ and upload in Excel file.

DETAILS OF TECHNICAL PERSONNEL TO BE EMPLOYED FOR THIS WORK

Sr. No. Name Designation Qualifications Professional experience and details of work carried out How these would be involved in this work Remarks

Name and address of authorized signatory

FillintheyellowpartoftheForm–“H”anduploadinExcelfile.

Sr. No. Name of Equipment/ Plant Nos Capacity or Age Condition Ownership status Current Remarks

Type & make Presently Leased To be Proposed Location

owned purchased to be hired

1. Insulation Resistance meter

2. Crimping tool.

3 Drilling Machine

5 Welding Machine

6 Box Spanner Set

7 Electrical safety shoe, gloves, safety belts

8 Aluminium ladder 20/40 ft.

9 Digital Multimeter

Name and address of authorized signatory

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Project Director BARC(V)

Name of Work:Supply, Installation, Testing and Commissioning of Electrical equipment for TREndS complex at BARC, Atchutapuram, near Visakhapatnam, Andhra Pradesh.

Contract No:BARC-V/ESS-V/2026/04 Dt.28.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures including all taxes but excluding GST to be entered by the Bidder in Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 SITC of 2500 kVA Dry Type Transformer as per TS-001 & QAP-001 2 Nos. Excess(+) Full Conversion INR

2 SITC of 4000A LT Sandwich type bus-duct as per TS-002 & QAP-002 63 Mtr Excess(+) Full Conversion INR

3 SITC of 415V Switchgear Panel (LT PANEL 1B) as per TS-003 & QAP-003 1 No. Excess(+) Full Conversion INR

4 SITC of 415V Switchgear Panel (LT PANEL 2B) as per TS-004 & QAP-003 1 No. Excess(+) Full Conversion INR

5 SITC of 650 KVAR APFC Panel (2A) as per TS-005 & QAP-004 1 No. Excess(+) Full Conversion INR

6 SITC of 300 KVAR APFC Panel as per TS-006 & QAP-004 2 Nos. Excess(+) Full Conversion INR

7 SITC of MCC-1 as per TS-007 & QAP-005 1 No. Excess(+) Full Conversion INR

8 SITC of MCC-2 as per TS-008 & QAP-005 1 No. Excess(+) Full Conversion INR

9 SITC of MCC-3 as per TS-009 & QAP-005 1 No. Excess(+) Full Conversion INR

10 SITC of MCC-4 as per TS-010 & QAP-005 1 No. Excess(+) Full Conversion INR

11 SITC of MCC-5 as per TS-011 & QAP-005 1 No. Excess(+) Full Conversion INR

12 SITC of MCC-6 as per TS-012 & QAP-005 1 No. Excess(+) Full Conversion INR

13 SITC of MCC-8 as per TS-013 & QAP-005 1 No. Excess(+) Full Conversion INR

14 SITC of MCC-9 as per TS-014 & QAP-005 1 No. Excess(+) Full Conversion INR

15 SITC of MCC-10 as per TS-015 & QAP-005 1 No. Excess(+) Full Conversion INR

16 SITC of Lighting & power Panel-2 as per TS-016 & QAP-006 1 No. Excess(+) Full Conversion INR

17 SITC of Lighting & power Panel-3 as per TS-017 & QAP-006 1 No. Excess(+) Full Conversion INR

18 SITC of Lighting & power Panel-4 as per TS-018 & QAP-006 1 No. Excess(+) Full Conversion INR

19 SITC of Motorised Valve panel as per TS-019 & QAP-006 1 No. Excess(+) Full Conversion INR

20 SITC of ACDB Panel (1B) as per TS-020 & QAP-007 1 No. Excess(+) Full Conversion INR

21 SITC of ACDB Panel (2A) as per TS-021 & QAP-007 1 No. Excess(+) Full Conversion INR

22 SITC of ACDB Panel (2B) as per TS-022 & QAP-007 1 No. Excess(+) Full Conversion INR

23 SITC of 20 KVA UPS (UPA-1B) with battery bank as per TS-023 & QAP-008 1 Set Excess(+) Full Conversion INR

24 SITC of 30 KVA UPS (UPA-2A & UPS-2B) with battery bank as per TS-024 & QAP-008 2 Set Excess(+) Full Conversion INR

25 SITC of 4P 63A MCCB with enclosure and indications for UPS isolation as per TS-025 2 Set Excess(+) Full Conversion INR

26 Supply & installation of 7 mtr height GI street light pole with cross arm and other accessories as per TS-026 & QAP-009 30 Nos. Excess(+) Full Conversion INR

27 SITC of 13000lm IP66 and IK08 street light fixture as per TS-027 & QAP-010 30 Nos. Excess(+) Full Conversion INR

28 Supply & Installation of 12mtr Air temrinals for Dyke as per TS-028 4 Nos. Excess(+) Full Conversion INR

29 Retrieval of existing underground 11kV Cable and re-laying in RCC trench as per TS-029 1200 Mtrs Excess(+) Full Conversion INR

30 End termination of 11kV 3C*400 Sqmm HT cable as per TS-030 4 Nos. Excess(+) Full Conversion INR

31 SITC of Earth pits as per TS-031 45 Nos. Excess(+) Full Conversion INR

32 SITC of 3.5CX400 Sqmm Aluminium conductor LT power cable as per TS-032 & QAP-011 4300 Mtrs Excess(+) Full Conversion INR

33 SITC of 3CX400 Sqmm Copper conductor LT power cable as per TS-033 & QAP-011 510 Mtrs Excess(+) Full Conversion INR

34 SITC of 3CX240 Sqmm Aluminium conductor LT power cable as per TS-034 & QAP-011 760 Mtrs Excess(+) Full Conversion INR

35 SITC of 3CX185 Sqmm Aluminium conductor LT power cable as per TS-035 & QAP-011 500 Mtrs Excess(+) Full Conversion INR

36 SITC of 3CX150 Sqmm Aluminium conductor LT power cable as per TS-036 & QAP-011 600 Mtrs Excess(+) Full Conversion INR

37 SITC of 3CX70 Sqmm Aluminium conductor LT power cable as per TS-037 & QAP-011 500 Mtrs Excess(+) Full Conversion INR

38 SITC of 3.5CX50 Sqmm Aluminium conductor LT power cable as per TS-038 & QAP-011 750 Mtrs Excess(+) Full Conversion INR

39 SITC of 3CX25 Sqmm Aluminium conductor LT power cable as per TS-039 & QAP-011 1800 Mtrs Excess(+) Full Conversion INR

40 SITC of 4CX16 Sqmm Aluminium conductor LT power cable as per TS-040 & QAP-011 1000 Mtrs Excess(+) Full Conversion INR

41 SITC of 3CX10 Sqmm Copper conductor LT power cable as per TS-041 & QAP-011 500 Mtrs Excess(+) Full Conversion INR

42 SITC of 3CX6 Sqmm Copper conductor LT power cable as per TS-042 & QAP-011 1000 Mtrs Excess(+) Full Conversion INR

43 SITC of 3CX4 Sqmm Copper conductor LT power cable as per TS-043 & QAP-011 2300 Mtrs Excess(+) Full Conversion INR

44 SITC of 2CX1.5 Sqmm Copper conductor LT power cable as per TS-044 & QAP-011 1400 Mtrs Excess(+) Full Conversion INR

45 SITC of 8 triad*1.5Sqmm copper conductor Instrumentation cable for RTD as per TS-045 & QAP-012 1300 Mtrs Excess(+) Full Conversion INR

46 SITC of 8PX1.5 Sqmm Copper conductor control cable as per TS-046 & QAP-012 720 Mtrs Excess(+) Full Conversion INR

47 SITC of 3PX1.5 Sqmm Copper conductor LT control cable as per TS-047 & QAP-012 4700 Mtrs Excess(+) Full Conversion INR

48 SITC of 12CX2.5 Sqmm Copper conductor LT control cable as per TS-048 & QAP-013 250 Mtrs Excess(+) Full Conversion INR

49 End termination of 3.5CX400 Sqmm Al. cond. LT power cable with double compression cable gland as per TS-049 120 Nos. Excess(+) Full Conversion INR

50 End termination of 3CX400 Sqmm Cu. cond. LT power cable with double compression cable gland as per TS-050 6 Nos. Excess(+) Full Conversion INR

51 End termination of 3CX240 Sqmm Al. cond. LT power cable with double compression cable gland as per TS-051 14 Nos. Excess(+) Full Conversion INR

52 End termination of 3CX185 Sqmm Al. cond. LT power cable with double compression cable gland as per TS-052 6 Nos. Excess(+) Full Conversion INR

53 End termination of 3CX150 Sqmm Al. cond. LT power cable with double compression cable gland as per TS-053 14 Nos. Excess(+) Full Conversion INR

54 End termination of 3CX70 Sqmm Al. cond. LT power cable with double compression cable gland as per TS-054 18 Nos. Excess(+) Full Conversion INR

55 End termination of 3.5CX50 Sqmm Al. cond. LT power cable with double compression cable gland as per TS-055 16 Nos. Excess(+) Full Conversion INR

56 End termination of 3CX25 Sqmm Al. cond. LT power cable with double compression cable gland as per TS-056 32 Nos. Excess(+) Full Conversion INR

57 End termination of 4CX16 Sqmm Al. cond. LT power cable with double compression cable gland as per TS-057 70 Nos. Excess(+) Full Conversion INR

58 End termination of 3CX10 Sqmm Cu. cond. LT power cable with double compression cable gland as per TS-058 6 Nos. Excess(+) Full Conversion INR

59 End termination of 3CX6 Sqmm Cu. cond. LT power cable with double compression cable gland as per TS-059 18 Nos. Excess(+) Full Conversion INR

60 End termination of 3CX4 Sqmm Cu. cond. LT power cable with double compression cable gland as per TS-060 44 Nos. Excess(+) Full Conversion INR

61 End termination of 8 TriadX1.5 Sqmm Cu. cond. LT insutrmentation cable with double compression cable gland as per TS-061 24 Nos. Excess(+) Full Conversion INR

62 End termination of 2CX1.5 Sqmm Cu. cond. LT power cable with double compression cable gland as per TS-062 28 Nos. Excess(+) Full Conversion INR

63 End termination of 8PX1.5 Sqmm Cu. cond. LT control cable with double compression cable gland as per TS-063 14 Nos. Excess(+) Full Conversion INR

64 End termination of 12CX2.5 Sqmm Cu. cond. LT control cable with double compression cable gland as per TS-064 10 Nos. Excess(+) Full Conversion INR

65 End termination of 3PX1.5 Sqmm Cu. Cond. LT control cable with double compression cable gland as per TS-065 83 Nos. Excess(+) Full Conversion INR

66 End termination of 3CX400 Sqmm Cu. cond. LT Power cable with flameproof double compression cable gland as per TS-066 6 Nos. Excess(+) Full Conversion INR

67 End termination of 3CX185 Sqmm Al. cond. LT Power cable with flameproof double compression cable gland as per TS-067 4 Nos. Excess(+) Full Conversion INR

68 End termination of 3CX150 Sqmm Al. cond. LT Power cable with flameproof double compression cable gland as per TS-068 6 Nos. Excess(+) Full Conversion INR

69 End termination of 3CX25 Sqmm Al. cond. LT Power cable with flameproof double compression cable gland as per TS-069 6 Nos. Excess(+) Full Conversion INR

70 End termination of 3CX10 Sqmm Cu. cond. LT Power cable with flameproof double compression cable gland as per TS-070 1 Nos. Excess(+) Full Conversion INR

71 End termination of 3CX4 Sqmm Cu. cond. LT Power cable with flameproof double compression cable gland as per TS-071 8 Nos. Excess(+) Full Conversion INR

72 End termination of 8 TriadX1.5 Sqmm Cu. cond. LT insutrmentation cable with flameproof cable gland as per TS-072 10 Nos. Excess(+) Full Conversion INR

73 End termination of 2CX1.5 Sqmm Cu. cond. LT power cable with flameproof cable gland as per TS-073 9 Nos. Excess(+) Full Conversion INR

74 End termination of 3PX1.5 Sqmm Cu. Cond. LT control cable with falmeproof cable gland as per TS-074 23 Nos. Excess(+) Full Conversion INR

75 SITC of 300mm ladder type cable tray as per TS-075 & QAP-014 170 Mtrs. Excess(+) Full Conversion INR

76 SITC of 450mm ladder type cable tray as per TS-076 & QAP-014 1000 Mtrs. Excess(+) Full Conversion INR

77 SITC of 600mm ladder type cable tray as per TS-077 & QAP-014 850 Mtrs. Excess(+) Full Conversion INR

78 SITC of 750mm ladder type cable tray as per TS-078 & QAP-014 205 Mtrs. Excess(+) Full Conversion INR

79 SITC of IP43 IK09 8 way LDB with accessories as per TS-079 2 Nos. Excess(+) Full Conversion INR

80 SITC of IP43 IK09 6 way ELDB with accessories as per TS-080 2 Nos. Excess(+) Full Conversion INR

81 SITC of IP 43 IK09 16 Way PDB with accessories as per TS-081 2 Nos. Excess(+) Full Conversion INR

82 Supply & Installation of GI conduit with accessories as per TS-082 100 Mtrs. Excess(+) Full Conversion INR

83 SITC of 12Modular Light switch boards as per TS-083 4 Nos. Excess(+) Full Conversion INR

84 SITC of 3Modular 16A Power points as per TS-084 40 Nos. Excess(+) Full Conversion INR

85 SITC of 3CX2.5Sqmm Cu. Conductor flexible FLRS cable as per TS-085 600 Mtrs Excess(+) Full Conversion INR

86 SITC of 3CX4 Sqmm Cu. Conductor flexible FLRS cable as per TS-086 500 Mtrs Excess(+) Full Conversion INR

87 End termination of 3CX2.5 Sqmm or 3CX4 Sqmm Cu. Conductor flexible cable as per TS-087 200 Nos. Excess(+) Full Conversion INR

88 Supply & Installation of 8mm dia Al alloy roof conductor complied with IEC 62561-2 and as per TS-088 1100 Mtrs Excess(+) Full Conversion INR

89 Supply & Installation of cross or T connectors for 8 mm dia rods complied with IEC 62561-1 and as per TS-089 450 Nos. Excess(+) Full Conversion INR

90 Supply & Installation of disconnecting clamps with intermediate plate between 8mm dia rod and Strip complied with IEC 62561-1 and as per TS-090 30 Nos. Excess(+) Full Conversion INR

91 Supply & Installation of conductor holder for side wall with acessoried as per TS-091 300 Nos. Excess(+) Full Conversion INR

92 Supply & Installation of seam clamps for air termination rods complied with IEC 62561-1 on metal roofs as per TS-092 800 Nos. Excess(+) Full Conversion INR

93 Supply & Installation of expansion pieces at 20 mtr intervals complied with IEC 62561-2 and as per TS-093 20 Nos. Excess(+) Full Conversion INR

94 Supply & Installation of PVC casing capping of size 25mmX16mm as per TS-094 100 Mtrs Excess(+) Full Conversion INR

95 Supply & installation of Push button stations as per TS-095 60 Nos. Excess(+) Full Conversion INR

96 Supply & Installation of 75mmX6mm Cu Strip as per TS-096 & QAP-015 30 Mtrs Excess(+) Full Conversion INR

97 Supply & Installation of 75mmX12mm GI Strip as per TS-97 & QAP-016 620 Mtrs Excess(+) Full Conversion INR

98 Supply & Installation of 50mmX10mm GI Strip as per TS-98 & QAP-016 1000 Mtrs Excess(+) Full Conversion INR

99 Supply & Installation of 25mmX3mm GI Strip as per TS-99 & QAP-016 450 Mtrs Excess(+) Full Conversion INR

100 Supply & Installation of 8 SWG Cu wire as per TS-100 200 Mtrs Excess(+) Full Conversion INR

101 Supply & Installation of RSFR-H insulated 50mmX6mm GI Sitrip as per TS-101 & QAP-017 610 Mtrs Excess(+) Full Conversion INR

102 Supply, fabrication and installation of Structural steel as per TS-102 6500 Kgs Excess(+) Full Conversion INR

103 Supply & installation of 3 mtr height GI street light pole with IP 66 and IK 08 Light fixutre for pathway lighting as per TS-103 & QAP-010 15 Nos. Excess(+) Full Conversion INR

104 SITC of LED lighting fixtures for Store bldg as per TS-104 & QAP-019 17 Nos. Excess(+) Full Conversion INR

105 SITC of LED lighting fixtures for Additional Store bldg as per TS-105 & QAP-019 23 Nos. Excess(+) Full Conversion INR

106 Providing & laying in PCC (1:2:4) at all elevations including consolidation, finishing, curing etc. as per TS-106 5 CuM Excess(+) Full Conversion INR

107 Providing & Laying design mix concrete as per TS-107 20 CuM Excess(+) Full Conversion INR

108 Providing Reinforcement steel of all diameters for reinforced cement concrete at all levels as per TS-108 1000 Kgs Excess(+) Full Conversion INR

109 Excavation as per TS-109 50 CuM Excess(+) Full Conversion INR

110 Graded gravel as per TS-110 20 CuM Excess(+) Full Conversion INR

111 Checkered plate cutting & re-arrangement as per TS-111 20 Sq. Mtr Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Quoted Rate in Words

Please Enable Macros to View BoQ information