Vivekadhin Grant 2026-27

Name Of work :- Providing and Erecting street light with pole at nagarpalika road to samsan in Maliya Miyana Nagarpalika

Sr. No. Quantity Description of Item. Nett Rate Amount.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

1 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

27 Ea with over-voltage protection 4997.48

(ii) 60 Watts Cat-lll

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper

2 202.5 Mtr wires of following size to be erected as directed. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking

3 27 Ea capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark CAT lll 270.68

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking

4 2 Ea capacity & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. 578.73

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V +

5 1 Ea 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also 3168.37

comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat

III (D) 4 pole 440V 40 Amp.

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable foundation (Included) as per details

7 27 Ea given by manufacturer considering site requirement. 8192.11

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole weight 59 kg

Supplying and erecting street light pole bracket comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class GI sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top having sufficient fastners for fixing the brackets and having

8 27 Ea suitable rise as per site condition as directed and spread of 2 mtr.with suitable welded stiffener reducer 683.77

and with lock nut complete painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. Suitable for side entry fitting brackets of following nos of arms. [A] Single

Arm Bracket 1.5 Mtr

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

9 27 Ea with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth 368.65

10 27 Ea For using salt and charcoal / coke as required for pipe type earthing. 171.7

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle

11 1 Ea of Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. Painting the Section 16691.26

Pillar inside and out side with three tank powder coated paint. section pillar roof should be without

joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (A) 150 X

X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs 95 cm long made from

40 X 40 X 6 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness (A) 2mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium

13 1160 Mtr conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of 126.25

following size of cables (B) 4 core 6 Sq. mm

14 1 Kg Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 77.77

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of

mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having

15 2 Ea back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing 5842.85

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. [A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

16 armoured cable complete with out going tails, insulating tape etc for following size of cables.

8 Ea (B) 2 to 4 core 6 Sq. mm 38.38

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly

17 crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below ground / road surface for enclosing cable

1100 Mtr (A)50 mm outer dia 62.62

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any

19 1050 Mtr size of cable or locating the fault all over the run and back filling the same and making the surface as 74.74

0 Mtr (B) If additional machinery like hammer driller or JCB use [Add] 357.54

Name Of work :- Providing and erecting Street Light With Pole At Vada Vistar Main Road To Bapu Ni Chaki In Maliya Miyana Nagarpalika

Sr. No. Quantity Description of Item. Nett Rate Amount.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

1 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

4 Ea with over-voltage protection 4997.48

(ii) 60 Watts Cat-lll

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

2 4 Ea with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth 368.65

3 4 Ea For using salt and charcoal / coke as required for pipe type earthing. 171.7

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper

4 12.0 Mtr wires of following size to be erected as directed. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured Aluminium cable 1.1KV. Grade to be

erected as directed of following size. (c)4 core 6 Sq. mm

Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should

be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium

/approved paint to be erected on / in existing Foundation. The length of poles are as below.(A)

mtr. Long Swaged Steel tubular pole (i) pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base

6 4 Ea plate with necessary G.I. J Bolts (Approximate Pole weight 67 Kg) For burial erection (ii) Add Extra 8616.31

for M.S. Base plate 300 X 300 X 16 mm for pole, Suitable for mounting on surface of foundation with

GI foundation bolts, with required stiffeners welded with pole.(iii) Add Extra for PU base primer and

PU Paint on pole.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia

x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 7.5 &

8/8.5 mtr pole)

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and

8 4 Ea having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener 561.56

reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms.

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with hinged doors and locking arrangement consisting of

suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch

of same make and suitable input and output Bakelite terminals and with door earthing approved by

Engineer in charge.(B) 40 Amp

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

10 1 Ea. necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & 823.15

connected as directed (For panel)

Name Of work :- Providing And Erwcting Street Light With Pole At Gulabdi main Road Abbashbhai Jeda House in Maliya Miyana Nagarpalika

Sr. No. Quantity Description of Item. Nett Rate Amount.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

1 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

7 Ea with over-voltage protection 4997.48

(ii) 60 Watts Cat-lll

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

2 7 Ea with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth 368.65

3 7 Ea For using salt and charcoal / coke as required for pipe type earthing. 171.7

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper

4 21.0 Mtr wires of following size to be erected as directed. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured Aluminium cable 1.1KV. Grade to be

erected as directed of following size. (c)4 core 6 Sq. mm

Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should

be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium

/approved paint to be erected on / in existing Foundation. The length of poles are as below.(A)

mtr. Long Swaged Steel tubular pole (i) pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base

6 7 Ea plate with necessary G.I. J Bolts (Approximate Pole weight 67 Kg) For burial erection (ii) Add Extra 8616.31

for M.S. Base plate 300 X 300 X 16 mm for pole, Suitable for mounting on surface of foundation with

GI foundation bolts, with required stiffeners welded with pole.(iii) Add Extra for PU base primer and

PU Paint on pole.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia

x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 7.5 &

8/8.5 mtr pole)

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and

8 7 Ea having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener 561.56

reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms.

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with hinged doors and locking arrangement consisting of

suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch

of same make and suitable input and output Bakelite terminals and with door earthing approved by

Engineer in charge.(B) 40 Amp

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

10 1 Ea. necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & 823.15

connected as directed (For panel)

Name Of work :- Providing and Erecting Street light With Pole At Takula Panchayat Office to Railway Station Road In Maliya Miyana Nagarpalika

Sr. No. Quantity Description of Item. Nett Rate Amount.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

1 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

20 Ea with over-voltage protection 5976.17

(ii) 60 To 90Watts Cat-lll

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

2 7 Ea with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth 368.65

3 7 Ea For using salt and charcoal / coke as required for pipe type earthing. 171.7

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper

4 60.0 Mtr wires of following size to be erected as directed. 46.46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured Aluminium cable 1.1KV. Grade to be

erected as directed of following size. (c)4 core 6 Sq. mm

Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should

be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium

/approved paint to be erected on / in existing Foundation. The length of poles are as below.(A)

mtr. Long Swaged Steel tubular pole (i) pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base

6 7 Ea plate with necessary G.I. J Bolts (Approximate Pole weight 67 Kg) For burial erection (ii) Add Extra 8616.31

for M.S. Base plate 300 X 300 X 16 mm for pole, Suitable for mounting on surface of foundation with

GI foundation bolts, with required stiffeners welded with pole.(iii) Add Extra for PU base primer and

PU Paint on pole.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia

x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 7.5 &

8/8.5 mtr pole)

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and

8 20 Ea having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener 561.56

reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms.

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with hinged doors and locking arrangement consisting of

suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch

of same make and suitable input and output Bakelite terminals and with door earthing approved by

Engineer in charge.(B) 40 Amp

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

10 2 Ea. necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & 823.15

connected as directed (For panel)

Schedule B 1+2+3+4

Note :- GST Extra As Per Government Rules