Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAccepted-AOC VILLAGE DOGHARI PO MOVISERI TEHSIL CHACHIOT DISTT MANDI HP | L1 | Accepted-AOC Award | |
| 2 | L2₹4.4 L+₹8,276.40 (1.94%)Rejected-Finance A R AND M O ON VARIOUS ROAD IN SECTION NALAGARH 1 UNDER NALAGARH SUB DIVISION SH HIRING OF JCB | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹4.4 L+₹17,674 (4.14%)Rejected-Finance | L3 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | DALEEP KUMAR L3 | AMAR NATH L1 | Manoj kumar L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 273.8 | Cum | 375 ₹1,02,675 | 370 ₹1,01,306 Lowest | 373 ₹1,02,127.4 |
| 2.00 | Laying, jointing and testing of GMS pipe bevelled edged conforming to IS:1239 of following size and class in trenches having random lengths of 5-7 mtrs including cost of fabrication of minimum 3 cut bends of required degree. The pipe shall have inside & out side Galvanisation at manufacturer work conforming to IS:4736 (with upto date ammendments). The pipe shall be jointed with circumferencial butt welded joints by electric arc welding with minimum three layers of welds so as to achive the minimum effective thorat thickness and strength of weld conforming to IS: 816-1969 sepecification, by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Ador)-CITOJET / Esab make, conforming to IS:814-1991, at site of work complete in all respects. Each butt welded joint shall be tested with dye-penetration test (with the kit consisting of 3 sprays of 250 ML each includes (a) Cleaner CL-96 (b) Penetrant PT-97 (c) Developer Div-98 of checkmate make) complete in all respects, including manual / mechanical handling of pipes in all leads and lifts to the entire satisfication of Engineer-in-charge. (The earth work in treches and cost of MS flanges to be measured and paid for separately). (SS)
GMS Pipe 65 mm $ (L) WT 3.20 mm thick | 315 | Rmt. | 130 ₹40,950 | 125 ₹39,375 Lowest | 130 ₹40,950 |
| 2.01 | GMS Pipe 50 mm $ (L) WT 3.20 mm thick | 330 | Rmt. | 115 ₹37,950 | 110 ₹36,300 Lowest | 110 ₹36,300 Lowest |
| 3.00 | Laying, jointing and testing of GMS tube in trenches (light grade) of following dia meter including providing and fixing tube fitting such as bends, tees, air valves, unions and collars etc. including carraige of Gl pipes as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately) in all leads and lifts. GMS Pipe 40 mm | 210 | Rmt. | 105 ₹22,050 | 100 ₹21,000 Lowest | 105 ₹22,050 |
| 3.01 | GMS Pipe 32 mm | 240 | Rmt. | 45 ₹10,800 | 40 ₹9,600 Lowest | 40 ₹9,600 Lowest |
| 3.02 | GMS Pipe 25 mm | 450 | Rmt. | 40 ₹18,000 | 35 ₹15,750 Lowest | 40 ₹18,000 |
| 3.03 | GMS Pipe 20 mm | 315 | Rmt. | 30 ₹9,450 | 28 ₹8,820 Lowest | 30 ₹9,450 |
| 3.04 | GMS Pipe 15 mm | 390 | Rmt. | 30 ₹11,700 | 25 ₹9,750 Lowest | 30 ₹11,700 |
| 4.00 | Providing and fixing Leader make Cast Iron Sluice Valve of following diameters of PN 1.0/PN1.6 rating including welding of MS Flanges conforming to IS:6392-1971 with suitable table. The welding of flanges with pipe should be in double layer on the both faces of flanges including carriage of material with in all leads and lifts complete in all respect.
65 mm ф | 3 | Nos. | 47,000 ₹1,41,000 | 45,000 ₹1,35,000 Lowest | 45,000 ₹1,35,000 Lowest |
| 4.01 | 80 mm ф | 1 | Nos. | 50,000 ₹50,000 Lowest | 50,000 ₹50,000 Lowest | 50,000 ₹50,000 Lowest |
Tender Value
₹4.2 L
EMD Value
₹8,500
Closing Date
5 Jun 2025, 10:00 amClosed
Executive Engineer
EE JSV Mandi
Laying Jointing and Testing of GI Pipe 65mm dia 50mm dia 40mm dia 32mm dia 20mm dia and 15mm dia for area affected by the road expansion from Place Tombra to Sukodi bridge Deposit Work
2025_HPIPH_106141_1
2020-60
Open Tender
Civil Works
Item Rate
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹8,500
25 Sept 2025
24 May 2025
5 Jun 2025
24 May 2025
5 Jun 2025
24 May 2025
Amount
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.
Laying, jointing and testing of GMS pipe bevelled edged conforming to IS:1239 of following size and class in trenches having random lengths of 5-7 mtrs including cost of fabrication of minimum 3 cut bends of required degree. The pipe shall have inside & out side Galvanisation at manufacturer work conforming to IS:4736 (with upto date ammendments). The pipe shall be jointed with circumferencial butt welded joints by electric arc welding with minimum three layers of welds so as to achive the minimum effective thorat thickness and strength of weld conforming to IS: 816-1969 sepecification, by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Ador)-CITOJET / Esab make, conforming to IS:814-1991, at site of work complete in all respects. Each butt welded joint shall be tested with dye-penetration test (with the kit consisting of 3 sprays of 250 ML each includes (a) Cleaner CL-96 (b) Penetrant PT-97 (c) Developer Div-98 of checkmate make) complete in all respects, including manual / mechanical handling of pipes in all leads and lifts to the entire satisfication of Engineer-in-charge. (The earth work in treches and cost of MS flanges to be measured and paid for separately). (SS) GMS Pipe 65 mm $ (L) WT 3.20 mm thick
GMS Pipe 50 mm $ (L) WT 3.20 mm thick
Laying, jointing and testing of GMS tube in trenches (light grade) of following dia meter including providing and fixing tube fitting such as bends, tees, air valves, unions and collars etc. including carraige of Gl pipes as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately) in all leads and lifts. GMS Pipe 40 mm
GMS Pipe 32 mm
GMS Pipe 25 mm
GMS Pipe 20 mm
GMS Pipe 15 mm
Providing and fixing Leader make Cast Iron Sluice Valve of following diameters of PN 1.0/PN1.6 rating including welding of MS Flanges conforming to IS:6392-1971 with suitable table. The welding of flanges with pipe should be in double layer on the both faces of flanges including carriage of material with in all leads and lifts complete in all respect. 65 mm ф
Manoj kumar (BID ID -522174)
DALEEP KUMAR (BID ID -522169)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .