Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹50Accepted-AOC | ₹50 | 1 | Accepted-AOC L1 one item |
| 2 | 1₹2,205Rejected-AOC | ₹2,205 | 1 | Rejected-AOC L1 86 items |
| 3 | 1₹8,000Rejected-AOC MALABAR CEMENTS REGISTERED OFFICE AND WORKS REGISTERED OFFICE AND WORKS MALABAR CEMENTS ROAD VILLAGE TOWN WALAYAR CITY PALAKKAD | ₹8,000 | 1 | Rejected-AOC L1 one item |
Tender Value
₹3.4 Cr
Closing Date
18 Sept 2024, 5:00 pmClosed
Block Programme Officer
Block Programme Officer Kuzhalmannam Block Panchayat,Kuzhalmannam PO,Kuzhalmannam,Palakkad 678702
Supply of materials for various works under Mahatma Gandhi NREGS at worksites in Kannadi,Kottayi,Kuthanur,Kuzhalmannam,Mathur,Thenkurissi Gramapanchayats as per their supply orders
2024_CRD_687913_1
N-35/2024
Open Tender
Raw Materials
Item Wise
180 days
Kuzhalmannam Block Panchayat
Please refer Tender documents.
4 documents required · 4 mandatory
₹8,850
Exempted
21 Apr 2025
28 Aug 2024
23 Sept 2024
28 Aug 2024
18 Sept 2024
28 Aug 2024
Stone Aggregate(single size):40mm nominal size
Stone Aggregate(single size):20mm nominal size
Stone Aggregate(single size):10mm nominal size
Coarse sand(zone III)
Fine sand (zone IV)
Portland Cement
Stone for masonry work
Quarry Waste
Interlocking C.C. paver block (80 mm thick, M-30)
Through andbond stone size 24x24x39cm
Solid blocks of size 30 x 20 x15 cm
Solid blocks of size 30x20x20cm
Structural steel such as tees,angles,channels and R.S joists
Red oxide Zinc chromate primer
PVC Bend 63mm dia.4kg/cm2
PVC Pipe 63mm outer dia.4kg/cm2
Twisted steel/deformed bars
Gravel 5mm to 10mm
Boulder 50mm to 200mm
GI Trafford profile sheet .35mm thick
Mild steel tubes hot finished welded type
Stainless steel screws 50mm
welding by electric plant
Hire charges of concrete Mixer 0.25 to0.40 cum with Hopper
Vibrator (Needle type 40mm)
Mild steel tubes electric resistant or induction butt welded
Mild steel round bar 12mm dia and below
Flats up to 10mm in thickness
Flats exceeding 10mm in thickness
Mild steel plates
Mild steel rivets
20mm dia holding down bolts
Factory made glass reinforced plastic door frame 90x45 mm i/c carriage
30mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage
Second class teak wood in scandling
Second class teak wood in planks
Mild steel sheets for tanks
24mm thick Factory made shutters with styles,rails and panels of PVC exteucted sections in white.grey or wooden finish
Vitrified floor tile 60x60 cm
Ceramic Glazed Tiles Ist quality minimum thickness 5mm in all colours shades and designs except burgundy,bottle green black
Ceramic Glazed Tiles Ist quality 300x300mm in all shades and designs of white,lvory,gray,Fume Red brown etc.
Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
Plastic emulsion paint
Stainless steel kitchen sink -without drain board 470x 420mm bowl depth 178mm
C.I. bracket for wash basin and sinks
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700mm i/c PVC waste fittings
Vitreous China orrisa type w.c pan size 580mm
Flushing Cistem P.V.C. 10 its capacity (low level)(white),(with fittings,accessories and flush pipe)
100mm S.C.I. trap with vent heel
PVCpipe 25mm outer dia.10kg/cm2
PVC Elbow 63mm dia.
PVC 45 degree Elbow 63mm dia.
PVC door Elbow 63mm dia
PVC bend 63mm dia
PVC Elbow 110mm dia.
PVC door Elbow 110 mm dia
Material-75mm valve
Polyethylene water storage tank with cover and suitable locking arrangement
PVC 45 degree Elbow 110 mm dia
PVC pipe 63 mm outer dia.6kgf/cm2
Vitreous China flat back wash basin 550x400 mm
15mm C.P. brass tap
C.P. brass waste 32mm
PVC pipe 110 mm outer dia 4kgf/cm2
PVC pipe 20 mm outer dia.10kgf/cm2
Bitumen washer
G.I. Plain washer thick
Precoated Aluminium Trafford sheet 0.450mm thick
Beam clamp 300-380 mm (450-1070 mm)
Adjustable telescopic prop 3 m (2.02-3.75m)
Bolts and nuts up to 300 mm in length
Water proof ply 12 mm thick
G.I Limpet washer
R.C.C Pipe
R.C.C Collars
Galvanised steel J OR L HOOKS 8 MM DIA
Galvanised steel bolts &nuts 6 mm dia and 25 mm long round head sith slots
Wire Nails
G I Pipes 40mm dia
G I Pipes 50mm dia
Precoated Galvanised Iron Profile sheet 0.50mm TCT
Galvanised Wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63mm
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .