07 /EE/PMD/PHED OF 2024-2025/SL14

Amount

Supply and delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS: 8034 (and as amended thereafter) with standard MOC for potable clear col water and BEE 4 Star Rated. The pump shall be directly coupled with a continuous rated 2-pole suitable wet type vertical squirel cage induction motor conforming to IS: 9283 (and as amended thereafter), suitable for operation in AC Three phases 415 V, 50Hz, suitable for DOL starter (category B motor) Discharge: 12 m3/hr. Head: 30 Mtr. Make- PHED Approved make

Supply & delivery of 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. Dia: 80 mm

Supply and delivery at site 6 sq. mm, 3 core, 1.1 kv, XLPE insulated Ar. Al. conductor cable from submersible pump to MCC panel Confirming IS:7098. (Make-PHED Approved Make)

Supply delivery of 32mm dia PVC pipe of ASTMD 1785 schedule 80 for laying cable through riverbed.

Sand cutting and laying of 06 sqmm 3 core XLPE insulated Ar. AL conductor cable through 32mm dia PVC pipe with MS clamp after laying cable refill the sand.

Laying of one Nos. cable 06 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (Eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supply and delivery of 150 mm x 40 mm MS clamp made of 5 mm thick and 24 mm width strip with nuts & bolts for holding 32 mm dia pipe as per direction and as per requirement.

80 mm dia CI top and bottom adopter

Lowering and installation of the above submersible pump motor set with above supplied UPVC column pipe and with all erection materials, reducer, enlarger etc. as required, into the riverbed tube well including necessary electrical connection and testing all complete up to satisfaction and as per direction of EIC.(Any item not considered in the specification i.e adaptor, short piece, bend etc. should be supplied at the time of installation. No extra charge will be given for those item) Rate is including hire charges of generator, welding set, fuels, lubricants and gland to complete the job as per relevant IS and as per durection of EIC.

Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5')

Suitable Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65 including suitable legs and 3 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Radar Level Transmitter - CWR of Pump house Reliable measuring: for changing medias, pressure, temperatures, gas phases. Floodable sensor design: IP68/NEMA6P Approval:No1-hazardous area Power Supply:- Output ; Operation: 2-wire ; 4-20mA ; Bluetooth (App) configuration Antenna; Max. Measuring Range: 40 mm / 1-1/2"; 8mtr liquid 40....60 deg C/ -40.....1400F Process Connection front Side; Material; Thread G1lSO228; PVDF Process Conneition Front Side; Material: Thread ISO228 G1-1/2 UZ; PVDF Cable Length: 10m/32ft The instrument will be supplied with wired Meter :Protection Box, consisting of Over Voltage protection, 24V DC power supply and Surge protection. Make- As per PHE vendor list.

Supply of Residual chlorine measuring kit.

Supply of DN 250 Electro-Magnetic Flow Meter with 20 Mtr Cable( OHR site of Sirkabad) Make: As per PHE vendor list. Full Bore Electromagnetic Flowmeter-250 mm Full Bore Electromagnetic Flowmeter: Protection: IP68 (Minimum inbuilt 20 meter cable, factory potted), Full hore type Electro Magnetic Flow meter With Smart Transmitter (Volume Flow rate output: 4-20mA HART Output and Totalizer Pulse Output: 0.05cu.m/Pulse) With LCD backlit Display, Calibration lab as per ISO 17025, Accuracy: 0.5%, +/-2mm/sec, Measuring, Reference & Empty Pipe Detection Electrode with Polyurethane/Hard Rubber Liner, Supply: 24V DC or 230VAC

Supply delivery of 250mm dia MS dismantling joints PN 1.0 ratings with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts.

Installation of above supplied flowmeter with MS dismentaling joint with rubber compression ring and adjustable follower flanged with complete assembled unit with galvanized stud and nuts and by cutting existing pipe, chamferring & fitting-fixing with proper alingment with by expert personnel supplying all required anciliries , short piece as per direction of EIC.

Supply, delivery at site and storage of safety equipment like 3 kgs. fire extinguishers IS 7285: 1 nos, fire buckets IS 2546: 2 nos, rubber mats IS 15652, shock treatment chart (Bangali) and first aid box as per satisfaction of EIC.

Supply, delivery and fitting fixing of Glow sign board as per following specification and direction of EIC. Erection of main structure of 5’-0” x 3’-6” x 6” (depth) with 40 mm x 40 mm x 5 mm thick MS angle and other section on necessary and inner support work by 40 mm x 40 mm x 5 mm thick MS angle dully welded with intermediated siftness structures having depth of 6” as per direction of EIC. The top and bottom including right, left and back sides of the structure shall be covered by 22 SWG G.I. sheet with brick piller required nos of MS bolt washer including 2 coat synthetic enamel paint & primer. Supply & fixing 2.5 mm thick super quality poly carbonate sheet with printing the size of sheet 5’-0” x3’-6”.The sheet on the back side with reserve cutting vinyle sticker with adhesive of the board and supply and fixing aluminium angle of with necessary screws, nuts, bolts etc. for rigidly fixed of the surrounding structure. Supply & fixking 4 nos. 20 watt LED tube light (Make-Philips/Approved make of PHED) fitting complete with all accessories on wooden batten structure with dully wire up ready for main operation of 230 volts. A.C. supply including inside wiring by 1.5 sq mm copper wire including porcelain connectors as required including transportation & shifting charges as per direction of EIC.

Add GST @ 18%

Add CESS @ 1%

TAPAN KUMAR DEY (BID ID -5603948)

SAIBAL SARKAR (BID ID -5604009)