Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.5 CrAdmitted-Finance NOT AVAILABLE | ₹8.5 Cr | L1 | Admitted-Finance |
| 2 | L2₹10.5 Cr+₹2.0 Cr (24.1%)Admitted-Finance | ₹10.5 Cr+₹2.0 Cr (24.1%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | HYDRAULIC ENGINEERING COMPANY L2 | punjab irrigation and farm solutions L1 |
|---|---|---|---|---|---|
| 1.00 | SOLAR PUMPING MACHINERY
Design, Engineering, Providing and fixing, installing and commissioning of complete SOLAR Submersible Pump and Motors with CONTRO PANNELs set with all accessories for water lifting scheme with discharge 10,000 ltr. / Day at dynamic head of 40 m as per direction of Engineer-in-Charge including testing commissioning complete with following features:-
MOTOR PUMP-SET: Submersible solar AC Pump to meet required discharge and head and should have the following features.
MNRE approved Solar AC pump of reputed make i.e KSB/Lubi/ Kirloskar/or equivalent. The manufacturers of pumps should self-certify that, the pump and all external parts of motor used in submersible pumps, which are in contact with water, are of stainless steel.
Solar PV Modules for Solar Pump shall be provided, fixed, installed, and operationalized with all accessories with following features: -
SOLAR PUMP CONTROLLER (MPPT):
Including- Solar pump controller suitable for operation with Solar or Grid, changeover switch for selection of Source of power solar/grid should be provided, Pump controller should be Maximum Power Point Tracker (MPPT) based to optimally use the Solar panel and maximize the water discharge, the Pump controller must be housed in a cabinet having at least IP54 protection with adequate mounting arrangement, adequate protections should be incorporated against dry operation of motor pump set, lightning, hails and storms, protection against open circuit, accidental short circuit and reverse polarity should be provided.
PV ARRAY: The SPV water pumping system should be operated with a PV array. Sufficient number of modules in series and parallel could be used to obtain the required PV array power output. Use of PV modules with higher power output is preferred. Indigenously produced PV module (s) containing mono/ multi crystalline silicon solar cells should be used in the PV array for the SPV Water Pumping systems. Modules supplied with the SPV water pumping systems should have certificate as per IEC 61215 specifications or equivalent National or International/ Standards. Modules must qualify to IEC 61730 Part I and II for safety qualification testing. The efficiency of the PV modules should be minimum 14% and fill factor should be more than 70%. The terminal box on the module should have a provision for “Opening” for replacing the cable, if required.
OTHER ASSESSORIES/ISOLATION SWITCH AND WIRES:
Including- Approved make suitable electrical accessories i.e AC/DC cables / inter connection wires, Switches/MCCB/MCB to be provided with the motor pump set, sufficient length and adequate size of cable should be provided for inter-connection between the PV array and the motor pump set, approved make and required size column pipe, steel rope, NRV, Clamp, and other required accessories to be provided,
(Supporting structure (MS) for solar panels and storage tanks shall be measured and paid separately as per ITEM No 7.) Including -Earthing to all equipment to be provided as per IS: 3043 (1987) A single Earth pit preparation and connectivity to all equipment. with 25x 3 GI strip. Including and fixing increaser/reducer/sockets/bends /Gate valves/ GUN METAL REFLUX VALVE 32 mm/ Nut bolts/reflux valve and Clamps, STEEL ROPE 5 mm2 thick for hanging submersible pumps into the borewell with testing of all above items as per directions of Engineer in charge. Including good reliable switch / MCCB suitable for DC / AC use is to be provided with the motor pump set, Sufficient length of cable should be provided for inter-connection between the PV array and the motor pump set. | 77 | Nos | 1,40,000 ₹1,07,80,000 | 1,30,000 ₹1,00,10,000 Lowest |
| 2.00 | Providing complete Submersible Solar Pump with motor of reputed make i.e.KSb, Lubi, Kirloskar, or required (Without accessories as stand bye replacement) for lifting water with discharge of 10000 ltrs per day at dynamic head of 40 mtrs as per direction of Engineer-in-charge. | 15 | Nos | 55,000 ₹8,25,000 Lowest | 82,000 ₹12,30,000 |
| 3.00 | Design, Engineering, Providing and fixing, installing and commissioning of complete SOLAR Submersible Pumps and Motors with CONTRO PANNELs set with allaccessories for water lifting schemewith discharge 10,000 ltr. / Day at dynamic head of 70 mm as per direction of Engineer-in-Charge including testing commissioning complete with following features: -
MOTOR PUMP-SET: Submersible solar AC Pump to meet required discharge and head and should have the following features.
MNRE approved Solar AC pump of reputed make i.e KSB/Lubi/ Kirloskar/or equivalent. The manufacturers of pumps should self-certify that, the pump and all external parts of motor used in submersible pumps, which are in contact with water, are of stainless steel.
Solar PV Modules for Solar Pump shall be provided, fixed, installed, and operationalized with all accessories with following features: -
SOLAR PUMP CONTROLLER (MPPT):
Including- Solar pump controller suitable for operation with Solar or Grid, changeover switch for selection of Source of power solar/grid should be provided, Pump controller should be Maximum Power Point Tracker (MPPT) based to optimally use the Solar panel and maximize the water discharge, the Pump controller must be housed in a cabinet having at least IP54 protection with adequate mounting arrangement, adequate protections should be incorporated against dry operation of motor pump set, lightning, hails and storms, protection against open circuit, accidental short circuit and reverse polarity should be provided.
PV ARRAY: The SPV water pumping system should be operated with a PV array. Sufficient number of modules in series and parallel could be used to obtain the required PV array power output. Use of PV modules with higher power output is preferred. Indigenously produced PV module (s) containing mono/ multi crystalline silicon solar cells should be used in the PV array for the SPV Water Pumping systems. Modules supplied with the SPV water pumping systems should have certificate as per IEC 61215 specifications or equivalent National or International/ Standards. Modules must qualify to IEC 61730 Part I and II for safety qualification testing. The efficiency of the PV modules should be minimum 14% and fill factor should be more than 70%. The terminal box on the module should have a provision for “Opening” for replacing the cable, if required.
OTHER ASSESSORIES/ISOLATION SWITCH AND WIRES:
Including- Approved make suitable electrical accessories i.e AC/DC cables / inter connection wires, Switches/MCCB/MCB to be provided with the motor pump set, sufficient length and adequate size of cable should be provided for inter-connection between the PV array and the motor pump set, approved make and required size column pipe, steel rope, NRV, Clamp, and other required accessories to be provided.
(Supporting structure (MS) for solar panels and storage tanks shall be measured and paid separately as per ITEM No 7.) Including -Earthing to all equipment to be provided as per IS: 3043 (1987) A single Earth pit preparation and connectivity to all equipment. with 25x 3 GI strip. Including and fixing increaser/reducer/sockets/bends /Gate valves/ GUN METAL REFLUX VALVE 32 mm/ Nut bolts/reflux valve and Clamps, STEEL ROPE 5 mm2 thick for hanging submersible pumps into the borewell with testing of all above items as per directions of Engineer in charge. Including good reliable switch / MCCB suitable for DC / AC use is to be provided with the motor pump set, Sufficient length of cable should be provided for inter-connection between the PV array and the motor pump set. | 129 | Nos | 1,74,000 ₹2,24,46,000 | 1,45,000 ₹1,87,05,000 Lowest |
| 4.00 | Providing complete Submersible Solar Pump with motor of reputed make i.e.KSb, Lubi, Kirloskar, or required (Without accessories as stand bye replacement) for lifting water with discharge of 10000 ltrs per day at dynamic head of 70 mtrs as per direction of Engineer-in-charge. | 25 | Nos | 65,000 ₹16,25,000 Lowest | 82,000 ₹20,50,000 |
| 5.00 | Design, Engineering, Providing and fixing, installing and commissioning of complete SOLAR Submersible Pump and Motors with CONTRO PANNELs set with all accessories for water lifting scheme with discharge 10,000 ltr. / Day at dynamic head of 100 m as per direction of Engineer-in-Charge including testing commissioning complete with following features:-
MOTOR PUMP-SET: Submersible solar AC Pump to meet required discharge and head and should have the following features.
MNRE approved Solar AC pump of reputed make i.e KSB/Lubi/ Kirloskar/or equivalent. The manufacturers of pumps should self-certify that, the pump and all external parts of motor used in submersible pumps, which are in contact with water, are of stainless steel.
Solar PV Modules for Solar Pump shall be provided, fixed, installed, and operationalized with all accessories with following features:-
SOLAR PUMP CONTROLLER (MPPT):
Including- Solar pump controller suitable for operation with Solar or Grid, changeover switch for selection of Source of power solar/grid should be provided, Pump controller should be Maximum Power Point Tracker (MPPT) based to optimally use the Solar panel and maximize the water discharge, the Pump controller must be housed in a cabinet having at least IP54 protection with adequate mounting arrangement, adequate protections should be incorporated against dry operation of motor pump set, lightning, hails and storms, protection against open circuit, accidental short circuit and reverse polarity should be provided.
PV ARRAY: The SPV water pumping system should be operated with a PV array .Sufficient number of modules in series and parallel could be used to obtain the required PV array power output. Use of PV modules with higher power output is preferred. Indigenously produced PV module (s) containing mono/ multi crystalline silicon solar cells should be used in the PV array for the SPV Water Pumping systems. Modules supplied with the SPV water pumping systems should have certificate as per IEC 61215 specifications or equivalent National or International/ Standards. Modules must qualify to IEC 61730 Part I and II for safety qualification testing. The efficiency of the PV modules should be minimum 14% and fill factor should be more than 70%. The terminal box on the module should have a provision for “Opening” for replacing the cable, if required.
OTHER ASSESSORIES/ISOLATION SWITCH AND WIRES:
Including- Approved make suitable electrical accessories i.e AC/DC cables / inter connection wires, Switches/MCCB/MCB to be provided with the motor pump set, sufficient length and adequate size of cable should be provided for inter-connection between the PV array and the motor pump set, approved make and required size column pipe, steel rope, NRV, Clamp, and other required accessories to be provided.
(Supporting structure (MS) for solar panels and storage tanks shall be measured and paid separately as per ITEM No 7.) Including -Earthing to all equipment to be provided as per IS: 3043 (1987) A single Earth pit preparation and connectivity to all equipment. with 25x 3 GI strip. Including and fixing increaser/reducer/sockets/bends /Gate valves/ GUN METAL REFLUX VALVE 32 mm/ Nut bolts/reflux valve and Clamps, STEEL ROPE 5 mm2 thick for hanging submersible pumps into the borewell with testing of all above items as per directions of Engineer in charge. Including good reliable switch / MCCB suitable for DC / AC use is to be provided with the motor pump set, Sufficient length of cable should be provided for inter-connection between the PV array and the motor pump set. | 52 | Nos | 1,74,000 ₹90,48,000 Lowest | 1,75,000 ₹91,00,000 |
| 6.00 | Providing complete Submersible Solar Pump with motor of reputed make i.e.KSb, Lubi, Kirloskar, or required (Without accessories as stand bye replacement) for lifting water with discharge of 10000 ltrs per day at dynamic head of 100 mtrs as per direction of Engineer-in-charge. | 10 | Nos | 65,000 ₹6,50,000 Lowest | 82,000 ₹8,20,000 |
| 7.00Steel tower for elevated M.S. Tank 7.50 mtr. height along with foundation in cement concrete:- | |||||
| 7.01 | Steel work welded in built up section trusses and framed work for Fabrication of Steel tower for elevated M.S. Tank 7.50 m height including cutting hoisting fixing in position and applying a priming coat of red oxide, framed guard bars, ladders, railing, brackets, complete with entering & Locking Arrangements to the tank and similar work including all leads lifts as per the direction of Engineer-in-charge. | 1,501 | Qtl | 13,000 ₹1,95,13,000 | 115 ₹1,72,615 Lowest |
| 8.00 | Fabrication & erection of pipe tower withdismantled pipe ( issued free of cost by department) for elevated M.S. Tank 7.50 m height in position by cutting, welding with MS felets in position and applying a priming coat of red oxide, framed guard bars, ladders, railing, brackets, complete with entering & Locking Arrangements to the tank and similar work including all leads lifts as per the direction of Engineer-in-charge. | 77 | Nos | 30,000 ₹23,10,000 Lowest | 66,000 ₹50,82,000 |
| 9.00 | Excavation in foundation and trenches etc.in earth work in all kinds of soil such as pick work ,jumper work decomposed conglomerate saturated soil soft and hard rock up to all leads lifts stacking the excavated soil not more than 3mtr.clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinth sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads lifts and as per directions of the Engineer-in charge. | 314.76 | Cum | 340 ₹1,07,018.4 | 300 ₹94,428 Lowest |
Tender Value
₹8.0 Cr
EMD Value
₹8.0 L
Closing Date
30 Sept 2021, 9:00 amClosed
Executive Engineer
Jal Shakti Division Paonta Sahib District Sirmour HP
Providing Decentralized Community Owned stand alone Solar Powered Water Supply Scheme in various villages (under Jal Jeevan Mission) of Paonta Constituency in Tehsil Paonta Sahib District Sirmour HP
2021_HPIPH_52522_1
PNT-SMR02-720 No. 9658-9757 Dated 20-09-2021
Open Tender
Civil Works
Item Rate
180 days
Paonta Sahib
Please refer to tender documents
12 documents required · 12 mandatory
₹2,500
EE JS Division Paonta Sahib
₹8.0 L
29 Oct 2021
20 Sept 2021
30 Sept 2021
20 Sept 2021
30 Sept 2021
20 Sept 2021
20 Sept 2021 - 30 Sept 2021
Amount
Providing complete Submersible Solar Pump with motor of reputed make i.e.KSb, Lubi, Kirloskar, or required (Without accessories as stand bye replacement) for lifting water with discharge of 10000 ltrs per day at dynamic head of 40 mtrs as per direction of Engineer-in-charge.
Providing complete Submersible Solar Pump with motor of reputed make i.e.KSb, Lubi, Kirloskar, or required (Without accessories as stand bye replacement) for lifting water with discharge of 10000 ltrs per day at dynamic head of 70 mtrs as per direction of Engineer-in-charge.
Providing complete Submersible Solar Pump with motor of reputed make i.e.KSb, Lubi, Kirloskar, or required (Without accessories as stand bye replacement) for lifting water with discharge of 10000 ltrs per day at dynamic head of 100 mtrs as per direction of Engineer-in-charge.
Steel tower for elevated M.S. Tank 7.50 mtr. height along with foundation in cement concrete:-
Steel work welded in built up section trusses and framed work for Fabrication of Steel tower for elevated M.S. Tank 7.50 m height including cutting hoisting fixing in position and applying a priming coat of red oxide, framed guard bars, ladders, railing, brackets, complete with entering & Locking Arrangements to the tank and similar work including all leads lifts as per the direction of Engineer-in-charge.
Fabrication & erection of pipe tower withdismantled pipe ( issued free of cost by department) for elevated M.S. Tank 7.50 m height in position by cutting, welding with MS felets in position and applying a priming coat of red oxide, framed guard bars, ladders, railing, brackets, complete with entering & Locking Arrangements to the tank and similar work including all leads lifts as per the direction of Engineer-in-charge.
Excavation in foundation and trenches etc.in earth work in all kinds of soil such as pick work ,jumper work decomposed conglomerate saturated soil soft and hard rock up to all leads lifts stacking the excavated soil not more than 3mtr.clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinth sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads lifts and as per directions of the Engineer-in charge.
Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded stone agg.40mm nominal size) and curing complete excluding the cost of form work in foundation & plinth including all leads lifts and carriage of material and as per the directions of Engineer-in-charge.
Providing and laying cement concrete 1:2:4(1cement:2sand:4 graded stone agg.20mm nominal size) and curing complete excluding the cost of form work in foundation & plinth including all leads lifts and carriage of material and as per the directions of Engineer-in-charge.
M.S. STORAGE TANK 4000 LTR. CAPACITY Manufacturing and fixing of M.S. Plate of 3.15 mm thick water storage tank up to 4000 L capacity on 7.50 m stagging height stand ( Supporting structure 7.50 m stagging will be measured and paid separately) and frame for Solar Power system and M.S. Ladder by butt welding complete with M.S. Manhole cover with locking arrangement at the top, suitable inlet - outlet, sockets, painting complete inside and outside 3 coats including the coat of primer & inside anti corrosive and outside enamel paint hoisting complete with all leads, lifts and carriage of material as per design and drawing provided by the department and direction of Engineer-in-charge
DISTRIBUTION SYSTEM WITH FHTC Excavation in drains and channels etc. in earth work in all kinds of soil such as pick work,jumper work ,blasting work decomposed conglomerate saturated soil soft rock and hard rock including dressing of sides and beds and preparation of sub grade to level or slope including refilling the trenches and disposing of surplus earth up to all leads lifts disposed earth to be levelled and neatly dressed including jungle clearance and as per direction of Engineer-in-charge.
Laying, jointing ,testing& commissioning in trenches following dia socketed galvanised mild steel tube of various dia of light grade as under confirming to BIS: 1239- (Part-I) 1990 or latest with up to date amendments , capable of withstanding required test pressure as BIS Code, in random lengths of 5.5 to 6.5 mtr. The pipe ends shall be socketed , Tees & bends shall be manufactured from parental pipe etc. and cutting of pipes wherever required as per site requirement as per site conditions including carriage in all leads & lifts and as per direction of Engineer in charge.((earth work in trenches to be measured and paid for separately)
15 mm dia (L)
25 mm dia (L)
32 mm dia (L)
40 mm dial (L)
Providing & fixing MS Clamp for house connection from GI Pipe (25mm dia to 40 mm dia) including welding a nipple of 15 mm dia GI pipe providing suitable orifice on the delivery pipe with rubber gasket , nut bolts including all leads lifts and carriage of material as directed by the Engineer-in-Charge.
Providing &fixing BrassBib Tap of15 mm dia (L) (Superior quality) accessories like fittings, union, nipple, elbow,tee,plane nipplecomplete in all respect. including all leads lifts and carriage of material as directed by the Engineer-in-Charge.
Providing, jointing and lowering HDPE pipe of 32 mm dia (OD) for column pipe in borewell complete with all fittings, fixtures etc with in alllead’s lifts and carriage of material as directed by the Engineer-in-Charge.
Supply and fixing galvanized steel bar-bed wire (IS:278-1962 Type-I) weighing 9.38 kg per 100 metres (minimum) straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanized mild steel wire, staples or Steel pins etc. as directed (posts and struts of wood concrete, steel etc. and straining bolts shall be paid for separately)
Providing fixing and MS welded wire mess of 25X25 mm size ( 3-5 Kg/Sqm ) to steel structure with a coat of primer red oxide complete in all respect including all leads lifts and carriage of material as directed by the Engineer-in-Charge.
HYDRAULIC ENGINEERING COMPANY
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.94 MB
Form-6.pdf
Tender Documents • 3.98 MB
GeneralTermAndConditions.pdf
Additional Documents • 0.36 MB
AdditionalPoints.pdf
Additional Documents • 0.18 MB
IndicativePlanforSolarSystem.pdf
Additional Documents • 0.38 MB
BOQ_78514.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .