Special Repair to Govt. Ayurvedic dispensary at Tullah Lad-Bharol District Mandi (H.P.)

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter Of area 3 sq. metres (three square meter) and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 (fifty) metres lead.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Taking out doors, windows and clerestory windows shutters (steel or wood) below 3 sqm (three square meter) in area including stacking within 20 metres lead as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) All complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of material within all leads and lifts and other incidentals .

Providing and fixing glazing With float glass panes of 4 mm (four milimeter) thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board with decorative lamination on one side and balancing lamination on other side conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing 250x16mm (two hundred fifty by sixteen milimeter ) Size anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 200x10mm (Two hundred into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 150x10mm (One hundred fifty into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete. Anodised Aluminium handles 125 mm (One hundred twenty five milimeter) with plate 175 x 32 mm (One hundred seventy five into thirty two milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete. Anodised Aluminium handles 100 mm (One hundred milimeter) with plate 175 x 32 mm (One hundred seventy five into thirty two milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (three hundred by three hundred milimeter) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimeter) thick Cement Mortar 1:4 (One Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme per square meter) including pointing the joints with white cement and matching pigments etc., complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (three hundred by three hundred milimeter) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimeter) thick cement mortar 1:4 (One Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme per square meter) including grouting the joints with white cement and matching pigments etc., complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and laying Vitrified tiles in 600x600 mm (six hundred by six hundred milimeter) sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (tweleve milimeter) thick bed of cement mortar 1:3 (One cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme per square meter) including grouting the joint with white cement & matching pigments etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Repairs to plaster With cement mortar 1:4 (One cement isto four coarse sand) of thickness 12 mm to 20 mm (tweleve to twenty milimeter) in patches of area 2.5 sq.meters (two point five square meter) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-inCharge.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Finishing walls with textured exterior paint of required shade in Old work (One or more coats) applied @ 1.82 ltr/10 sqm (One point eight two liter per Ten Square meter).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm (six hundred thirty by four hundred fifty milimeter) with a pair of 15 mm (fifteen milimeter) C.P. brass pillar taps.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm (six hundred thirty by four hundred fifty milimeter) with a a single 15 mm (fifteen milimeter) C.P. brass pillar taps.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 8 mm (eight milimeter) dia C.P. / S.S. Jet with flexible tube upto 1 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 32 mm (Thirty two milimeter) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm, (one hundred thirty eight milimeter) breadth 102mm, (One hundred two milimeter) height of 75mm (Seventy five milimeter) with concealed fitting arrangements, weighing not less than 106 gms (One hundred six grammes). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing PTMT shelf 440 mm (four hundred fourty milimeter) long, 124 mm (One hundred twenty four milimeter) width and 36 mm (thirty six milimeter) height of approved quality and colour, weighing not less than 300 gms. (Three hundred Grammes).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing CP Brass toilet paper holder.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Constructing masonry Chamber 60x60x75 cm, (Sixty by Sixty by Seventy five centimeter) inside in brick work in cement mortar 1:4 (One cement isto four coarse sand) for fire hydrants, with C.I. surface box 350x350 mm (three hundred fifty by three hundred fifty milimeter) top and 165 mm (One hundred sixty five milimeter) deep ( inside) with chained lid and RCC top slab 1:2:4 mix (One cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty milimeter) nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (One cement isto five fine sand isto ten graded stone aggregate 40 mm (fourty milimeter) nominal size) and inside plastering with cement mortar 1:3 (One cement isto three coarse sand) 12 mm (tweleve milimeter) thick, finished with a floating coat of neat cement complete as per standard design.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing C.I. 100 mm (One hundred milimeter) dia double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 110 mm diameter (One hundred ten milimeter) wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler 110 mm (One hundred ten milimeter).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5 degree (Eighty seven point five degree) 110 mm (One hundred ten milimeter).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Plain Shoe 110 mm (One hundred ten milimeter).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Anil Kumar