AS AND AS TO BLDG. NO P-56 UNDER LBW AND PROVN OF DEFENCE COMMUNITY CENTRE UNDER LBW AT NAVAL STN BHEEMUNIPATNAM UNDER GE (P) NAVY KALINGA

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Taking down cement plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc complete.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames)

Taking down old tarfelt treatment from roof surfaces including plaster etc complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demulition of bricks/ stone ,PCC block etc but built in cement mortar or cement lime mortar

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth but n exc 3.0m in depth ; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil

M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated soil not exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in footings, plinth beams and the like complete all as specified and directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in columns and pillars complete all as specified and directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in lintel beams, roof beams lintle beams and the like complete all as specified and directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in slabs supported on walls and the like complete all as specified and directed.

Use and waste of form work to sides of foundation/footings, plinth beams and similar work for rough finished surfaces complete all as specified and directed.

Use and waste of form work to sides of columns and pillars for for fair finished surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work, not exceeding 200mm thick for fair finished surfaces complete all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Mild steel bars 6mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6

Earth filling in floors or pavings, using surplus earth from excavation,laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M & L for 100mm thick Boulder Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface

M & L for 75 mm thick Plain Cement concret of type D2, 1:4:8 (40 mm graded aggregate) in subbase

M & L for Plain Cement concrete 25 mm thick type B-0, 1:2:4 (12.50 mm graded aggregate) in sub base

M & L for Ist or premium or standard quality of non skid, ceramic “coloured” joint free tiles of of size600x 600 x 7-8mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete of item all as directed.

M & L for Ist or premium or standard quality of non skid, ceramic “coloured” joint free tiles of of size 600 x 600 x 7-8mm thick, skirting etc.set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over backing of 10 mm tk in CM1:4 on fair faces of brick work or concrete surfaces

M & L for Ist or premium or standard quality of non skid, ceramic “coloured” joint free tiles of of size400x 400 x 7-8mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete of item all as directed.

M&L for glazed ceramic tiles in vertical surface like skirtings dado etc., of size 300x450x8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match for joint free over backing of 10mm thick in CM1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed by the Engineer-in-Charge.

M&L for 10 mm thick rendering as in Internal plaster on brick work or concrete surfaces in cement mortar 1:6 finshed even and smooth

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 in double layer, using integral waterproofing compound in the outer 5mm thick layer finshed fair and even.

M & L for Brushing neat cement slurry with 3.0 Kg of cement per Sq.m

M&L for 5 mm thick rendering on Celling plaster of concrete surfaces in cement mortar 1:3 complete all as specified and directed

Supply only Integral Water Proofing Compound [ISI marked] of approved make.

M&L Preparation of new surfaces of wall and applying two coats of oil bond distemper paint including applying 2mm thick wall care putty on walls.

M & L for preparation of new surface of walls and applying two coats of weather proof exterior emulsion over a coat of primer over 2mm thick of wall care putty for external surface on walls

M & L for preparation of new plastered surface and applying three coats of white wash on ceiling all as specified and directed

M & L for Rendering 15mm thick with CM 1:3 with water proofing compound on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra lime or cement) (WPC will be measured & paid seperately)

M&L for normal water proofing treatment on roof slab portion consisting with following operation (i) Cleaning surface by wire brushes, brooming, removin dust and applying with bitumen primer confirming to IS 3384- 1986 @ 0.50 Kg per Sqm. (ii) Applying a tack coat of hot bitumen 85/25 @ 1.2 Kg per Sqm for water proofing membrane (iii) Applying of Polymeric water proofing membrane wt not less than 3 Kg per Sqm over entitre area with overlappin and sealed all as specified and directed (iv) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane (v) Applying a bitumenous aluminum primer/paint 0.10 kg per Sqm complete all as specified and directed.

M/L for PCC (1:3:6) type C1 using 20 mm graded aggregate 75 mm thick as in plinth protection, finished even and fair without using extra cement complete.

M&L Second class hard wood Plain solid straight chowkhats and frames,wrought ,framed, rebated on the solid,rounded or chamfered ,put together with glue pinned at joints,supplied and fixed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and lywood face panels, commercial type on boths covered with deco rative face veneer with lipping/frame to match sidesfaces. the size of rail and stile as per IS 2009 (part-I)

S&F second class hard wood 30mm thick glazed and skeleton shutters for window , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24(b), supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.

S & F Aluminium , XMP wire mesh average width of aperture 1.40mm and fixed with aluminium wire staples

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails with mild steel frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, and with panelling of plain colour PVC sheet fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S & F 125 mm Butt hinges, Medium weight, cold rolled mild steel, and fixed

S & F Aluminium handles, cast type,anodised of size 150 mm

S & F of 200mm Aluminium anodised,barrel tower bolts of extruded section and fixed

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

M&L preparing new wooden surfaces of any description not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .

M&L Half Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4

M & L for 15- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar 1:4

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified.

S&F UPVC window,(unplastisized poly-Vinyl Chloride) sliding windows multi-chambered and stiffened framed windows using 88mm x 52mm size sections all-round as main frames and shutters made with profile sections of size 57mm x 42mm, including the cost and fixing of 5mm thick clear float glass in shutters and stainless steel wire mesh shutters shall have well defined welded corner joints without any gaps, fixed the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to facilitate smooth operation. Both the frames and the shutters shall be reinforced with GI profiles of thickness 1.25mm the entire window is covered with MS powder coated tube of size 40mm x 20mm all-round the frame the frame section, 10mm square bars horizontally placed at 120mm C/C and suitably placed vertically to avoid buckling and providing structural strength, Minimum weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and directed. Make : Rajshri Plastiwood/Sintex/Duroplast Extrusion Pvt. Ltd

M & L for Designer cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey and cement pigment in floors over a screed bed of 20mm thick in cement mortar 1:4

M&L for cement concrete 1:2:4, type B1 (20 mm graded stone aggregate) in lintels upto 1.5m clear span, copings,cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height bed plates and the like including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M & L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface.

M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M & L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in chajja and the like complete all as specified and directed.

Use and waste of form work to chajja and similar articles including edges

S&F Gl frame work for seamless false ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and grid of GI frame will be 60 x 60 cm to ceiling board as in required fancy architectural design complete all as specified and as directed.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Supply & fix Gypsum board 12 mm thick in ceiling fixed , cut opening for light and including 75 to 100 mm wide decorative gypsum corner beading finished smooth complete all as specified and as directed.

M & L for preparation of new surface and applying two coats of oil bound distemper over a coat of primer on ceiling all as specified and directed

S&F 20mm dia. (15mm internal dia.) 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F 25mm dia. (20mm internal dia.) 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by the Engineer-in-Charge.

S & F for rotational moulded polythene water storage tank (tripple layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-I 500 ltr capacity

S & F for PP-R Gate valves (brass insert) as per requirement of the site fixed 20 mm bore complete all as specified.

S & F stainless steel pipe 25mm dia Curtain rod incl stainless steel bracket for Windows,doors opening etc

S & F Fancy type CP Knobs for fixing curtain rod all as directed and specified

S & F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S & F Bib taps 15mm dia Fancy type Chromium Plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Supply and fixing Vitreous china WHB oval shape flat black size 630 x 500mm complete allincluding waste coupling and waste pipe complete all as specified.

S & F grating doom 125 mm dia with waste hole of PTMT (Min weight 40 gms)

S & F Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, low level flushing cistern of 10 Litres capacity and Seat Cover)

S & F 15mm bore dia Pillar taps Fancy type,chromium plated, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F PVC flexible connections 15mm size with PTMT nuts of length 600mm long

S & F two way bib cock, CP, Fancy type - 15mm dia, Make : Jaguar Catlogue No : FON-40041 or equivalent as approved by GE

Supply and fixing health faucet CP including 12 mm dia flexible tube attachment to wall hook and connection complete. Cat No.ALD-CHR-565

Supply and fixing brass CP towel rail 600mm all as per Cat No.ACN-CHR- 1111SM of make Jaquar or equivalent in other makes specified.

Supply and fixing brass IVC toilet paper holder complete all as per Cat Part No.ACN-CHR-1151N of make Jaquar or equivalent in other makes specified.

Supply and fixing brass IVC soap dish (polyurethene).Cat No.ACN-CHR-1131N of make Jaquar or equivalent in other makes specified.

Supply and fixing brass IVC angular stop cock including connection complete all as per cat no.FLR-CHR- 5053N of make Jaquar or equivalent in other makes specified.

Supply and fixingr Sheet shelf assembly 550 mm consisting of brass IVC bracket guard and 4 mm thick glass shelf of ornamental design complete all as per cat No.ACN-CHR-1171N of make Jaquar or equivalent in other makes specified.

Supply and fixing brass IVC bib taps, 15mm bore with wall flange completeall as per Cat No.CON-CHR-047KN of make Jaquar or equivalent in other makes specified

S&F , vitreous China urinals, Half Stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl CP sprader, waste coupling, waste pipe and grating complete all as specified and as directed by the Engineer-in-Charge.

S&F 10mm thick urinals glass partition size 450mmx900mm fixed with wall with SS brackets complete all as specified and as directed by the Engineer-in-Charge.

S & F 10 mm thick plain Sheet glass, ordinary quality for partition work fixed with aluminium frame complete all as specified and directed by engr-in-charge.

S & F for Anodised Powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron)

S&F 4.8mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq.m each pane.

S & F PVC (SWR) pipes 40 mm dia fixed to walls

S & FPVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls

S & F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches.

M&L Concrete bed to drain pipes 110mm dia including packing under and haunching against the sides of pipe after they are laid and tested

S&F 110mm dia PVC (SWR) bends any radius with axis door

S & F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls

S & F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laidin floors

S&F 75mm dia PVC (SWR) bends any radius with access door

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement including grating

S&F PVC (SWR) vent cowl 110 mm,

Surface excavation n.exc 30cm deep and averaging 15cmdeep and getting out in soft/ loose soil.

M&L 15 mm thick plastering in cm (1:4) on brick or concrete surfaces of wall and finishing the surface even & smooth without using extra cement.

M&L for concrete bed to drain pipes 150 mm dia with cement concrete 1:4:8 type D2 including packing under, and haunching against the sides of pipes after they are laid and testedall as directed

M & L for Underground drainage double wall corrugated HDPE pipe 150 mm dia SN4 confirming to IS : 16098(PART II) single socketed in any length laid in trenches or floors etc all as specified (Make - PRINCE OR EQUVALENT)

M & L for providing Precast RCC 1:2:4, Type B-1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], chullah hoods, chajjas, water troughs, mangers, Shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed.

Removing excavated material exc 50 m and not exceeding 100m and depositing where directed

Cutting into existing manholes for connecting newdrains ,making good to pipe andrendering ,cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100-200 mm dia pipe

Material and labour for point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through existing/New concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including new pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface all as specified and as directed.

All as per Item no 116 here-in-before but for one light point controlled by two 2 way switch all as specified and as directed.

All as per Item no 116 here-in-before but for one fan E/Fanpoint controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item no 116 above but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 116 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 116 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor of 6 sq mm size and drawing into and including concealed PVC conduit with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 6 sqmm, single core, as earth continuity wire all as specified and as directed.

Supply and fixing socket combination 2 in 1 3 pin 5 and 15 amp flush type universal all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 5 amps all as specified and as directed

S&F switch flush type, single pole Two way 5 Amps 230 volts all as specified and as directed.

Supply and fixing socket combination 2 in 1 3 pin 5 amp flush type universal all as specified and as directed.

Supply and fixing ceiling rose surface bakelite three terminals all as specified and as directed.

Supply and fixing fan regulator electronic deluxe rotary step type all as specified and as directed.

Supply and fixing sheet metal enclosure for MCCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts all as specified and as directed .

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8way with dim rail earth and neutral bar all as specified and as directed.

Supply and fixing MCB Four Pole (FP) C curve 10kA breaking capacity of 63 amps, 415 Volts in proper position all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

S&F in proper position MCB Double Pole of capacity up to 40 amps, 240 Volts c-series with 10kA breaking capacity all as specified and as directed.

Supply and fixing indoor luminare decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 10 W,230 V,50 HZ,slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

Supply only indoor luminare decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser,energy efficient saving LED BATTEN LIGHT 18 W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. Make : Bajaj Cat Part no. BCLSB18NW or equivalent as approved by GE

Supply and fixing LED mirror light fittings 07 W,230 V,50 HZ suitiable for indoor and outdoor applications complete all as specified and as directed.

Supply and fixing LED bulk head fittings 10 W,230 V,50 HZ suitiable for indoor and outdoor applications complete all as specified and as directed. Make Surya cat no SLE BH 10 W or equivalent as approved by GE

Supply and fixing on wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamp etc all as specified and as directed by the Engineer-in-charge.

S&F Exhaust fan wall mount type 300 mm sweep metal body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

S&F Exhaust fan wall mount type 250 mm sweep PVC body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

S&F ceiling fan complete with accessories 230v SP 1200 mm sweep and connection with ceiling rose with MS hooke for hanging of suitable size all as specified and as directed. Make : Havells Model No. ES 50 or Equivalent as approved by GE

M&L for Earthing complete with 2.5m CI pipe 80 mm dia with flanged ends, centifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slote up to 2 mtrs length buried directly and preferably vertically in ground with top flanged ended 2 mtrs below ground lebel welded/connected with GI strip 32X6 mm dia Galvanised iron or steel wire, connected to Earth pit to DB for earthing including filling the pit with charcol common salt surrounding the earth pipe includingdrilling 400 mm dia bore in any strata of soil to lower the CI pipe complete

supply installation testing commissioning LT Panel board (For community centre ) made out of CRCA sheet 3.15 mm thick indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, cable connector for connecting multi cables located in cable chamber terminated form the switchergear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 tinned copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 500 A capacity complete with powder coating, necessary internal electric connection as required and provision of the following:

Incoming:

MCCB AC 3 Phase 415 V, 50Hz 4 pole 160 A capactiy 25 kA with adjustable type thermal and magnetic setting relays - incoming-1 no

Outgoing:

MCCB AC 3 Phase 415 V, 50Hz 4 pole 100 A capactiy 25kA with adjustable type thermal and magnetic setting relays -02Nos (01Nos O/G + 01 Nos Spare) for bldg DB.

MCCB AC 3 Phase 415 V, 50Hz 4 pole 63 A capactiy 16 kA with adjustable type thermal and magnetic setting relays - 2nos (012 Nos O/G + 01 Nos Spare) for bldg DB

4 Pole MCB 25 Amp with earth leakage, overload and short circuit protection of 10 Amps, 100 mA, 10 kA C Curve- 02 Nos( 01 Nos Spare). (for street lights )

Time switches 415 V three Phase of 20 Amp rating with contactor -01

Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs

LED indicating lamps with colour Red, Yellow, Blue - 01 Set

Material and labour for sand cushioning for protection of underground FRLS cable consolidated and compacted with clean dry sand all as specified and as directed (Compacted thickness shall only be measured and paid)

Supply and lay bricks common burnt clay building bricks sub-class B of size 230x113x75 complete all as directed by Engr-in-Charge.

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 35 Sqmm 3.5 core laid in trench /poles/on wall all as specified and as directed.

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trench /poles/on wall all as specified and as directed.

Material and labour for galvanized iron tubing 40 mm bore light grade with all fitting for protection of FRLS cable, laid in trenches/wall/floor incl necessary clamp, bolt/nut if any all as specified and as directed. Note:Excavation ,earth work shall be measured and paid separately

M&L complete for cutting Steel tubing of existing GI pipe line 40/25/20 mm bore for alteration and addition and insert new Tee for branch connection complete .

M&L for for pipes galvanised medium grade supplied and laid complete incl fittings of dia 40 mm laid in trenches.

M&L for for pipes galvanised medium grade supplied and laid complete incl fittings of dia 25 mm laid in trenches.

M&L for for pipes galvanised medium grade supplied and laid complete incl fittings of dia 20 mm laid in trenches.

Supply and install stop valve, screwed, complete for size 25 mm dia.

Supply and fixing gun metal, globe or gate valve of size 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete.stop valve, screwed, complete for size 25 mm dia.

M&L complete for valve pit chamber of internal size 600x600x600 mm with full brick wall in CM (1:4), over a foundation of 100 mm pcc1:4:8 typeB2 including MS sheet cover of 3mm thick including locking arrangement with two coat of synthetic enamel paint over a coat of red oxide primer as specified. NOTE: - Unit rate is deem to be included for plastering to internal surfaces of chamber and exposed surfaces of external wall with CM 1:3.

S&F Rotational moulded polyethylene water storage tanks 1000Ltrs capacity (cylindrical vertical with closed top)hoisted and fixed in pposition all as specified in SSR Part I

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

POTHINA SAMBAMURTHY