PROVN OF DEFICIENT SINGLE ACCN FOR AIRMEN AT AF STN PHALODI

Amount

NOTE: Schedule ‘A’ Part I to XIII under Ser No. 1.00 to 13.00 are prepriced by MES. Bidders shall insert their lumpsum amount in the green coloured field under Col-6 only.

Lump sum price worked out for BUILDINGS/ STRUCTURES as listed in Sch 'A' Part I.

Lump sum price worked out for EXCAVATION, EARTH WORK AND SITE CLEARANCE as listed in Sch 'A' Part II

Lump sum price worked out for INTERNAL ELECTRIFICATION as listed in Sch 'A' Part III

Lump sum price worked out for INTERNAL WATER SUPPLY as listed in Sch 'A' Part IV

Lump sum price worked out for SEWAGE DISPOSAL as listed in Sch 'A' Part V

Lump sum price worked out for ROAD/ PATH as listed in Sch 'A' Part VI

Lump sum price worked out for EXTERNAL WATER SUPPLY as listed in Sch 'A' Part VII

Lump sum price worked out for EXTERNAL ELECTRIFICATION as listed in Sch 'A' Part VIII

Lump sum price worked out for AREA DRAINAGE as listed in Sch 'A' Part IX

Lump sum price worked out for FENCING/GATE as listed in Sch 'A' Part X

Lump sum price worked out for RAIN WATER HARVESTING as listed in Sch 'A' Part XI

Lump sum price worked out for SUMMER APPLIANCES as listed in Sch 'A' Part XII

Lump sum price worked out for HOT WATER SUPPLY as listed in Sch 'A' Part XIII

SCHEDULE 'A' PART - XIV MISCELLANEOUS ITEMS is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signifies this fact only. Bidder shall insert their rates in Green filed under Col-6.

INTERNAL ELECTRIC SUPPLY

S & F for wall mounted LED box type tube light fitting 4' x 20 watts industrial commercial interior batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F for LED tube light fitting with aluminium housing 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting with warranty option of 5 years from date of installation complete all as specified and as directed.

S & F for LED tube light fitting with aluminium housing 2 feet x 5 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting with warranty option of 5 years from date of installationcomplete all as specified and as directed. Make :- Bajaj or its equvalent in Wipro, Philips, Havells.

S & F for Decorative wall mounted luminaire made out of Nickle finesh square base with bend pipe with unbreakable globe glass suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting with warranty option of 5 years from date of installation including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed

S & F for ceiling fan, 230 Volts, 1200 mm sweep with mian air delivary 210 CFM, service value of the fan shall be greater than 6.1 (5 star rated) as per BIS with blades, down rod & other necessary accessories with brushless direct current motor (BLDC) with copper wire and electrical connections from ceiling rose to fan teriminal complete all as specified and directed.

S & F for energy efficient exhaust fan of 225 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Supply and Installation of Smart Single Phase Meter of different makes (Not more than 33 % of a particular make) including polycarbonate boxes with transparent cover to view meter display with the following specifications: (a) AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 5A-60A, with 3200 impulses per KWh,LED for Phase presence & LED for Relay status, conforming to IS-16444 standard with inbuilt 865-867 MHz 6 Low PAN Mesh Radio Frequency communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LCD based display only with compatible IP54 compliant polycarbonate box for outdoor mounting with optical port Provision on meter box. Meter Should support the following data : 15/30 min instantaneous data for Voltage, Current, Power factor, Power, Cumulative energy and frequency, monthly billing data & antitamper features. Load survey data for 45 days with 30 min integration period for kWh, Voltage, Current, frequency etc. Meter should have connect / disconnect functionality operable from prepaid billing software & shall show balance on display The meter should support open communication protocol DLMS with the software Note :- (a) It would be possible to run the meter in both prepaid and postpaid mode (b) The meters would carry 5 year warranty. (c) OEM shall have own NABL accredited lab for testing meters as per IS 16444 and certification shall be provided during sample approval (d) The meter cost would include DCU/ Gateway and repeater cost for RF commuication meters

Supply and Installation of Smart Three Phase Meter of different makes (Not more than 33 % of a particular make) including polycarbonate boxes with transparent cover to view meter display with the following specifications: AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 3x440 V, 50 Hz, 10A-60A, with 1600 impulses per KWh & KVArh,LED for Relay status, conforming to IS-16444 standard with inbuilt Cellular or inbuilt 865-867 MHz 6LowPAN Mesh Radio Frequency communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LCD based display only with compatible IP54 compliant polycarbonate box for outdoor mounting with optical port Provision on meter box Meter Should support the following data : 15/30 min instantaneous data for Voltage, Current, Power factor, Power, Cumulative energy and frequency, monthly billing data & antitamper features. Load survey data for 45 days with 30 min integration period for kWh, Voltage, Current, frequency etc Meter should have connect / disconnect functionality operable from prepaid billing software & shall show balance on display The meter should support open communication protocol DLMS with the software Note :- (a) It would be possible to run the meter in both prepaid and postpaid mode (b) The meters would carry 5 year warranty. (c) OEM shall have own NABL accredited lab for testing meters as per IS 16444 and certification shall be provided during sample approval (d) The meter cost would include DCU/ Gateway and repeater cost for RF commuication meters

Supplying, Fixing, Commissioning and testing of configuration of cloud based prepaid software for with following modules: (i) Meter Data Management Module: The meter data management module would be responsible for collecting the data from the data concentrator and make the data available to the billing system. The system would support offline meter data entry. The meter data management system would capture and provide the following data: (a) 30min instantaneous data from all the meters for seven parameters- Cumulative Energy,Power, Current, Voltage, Power factor and Frequency. b) Monthly and quarterly billing survey data for cumulative energy and max demand, Load Survey Data, Tamper Events (ii) Communication module: The system should provide communication of energy data and bills via print, email. (iii) Meter Master Data : The system would support meter data repository. The system should support meter replacment process. (iv) Excel Export : The system would support export of metering and billing data in excel format

Material and labour for maintenance free Chemical earthing of technology with copper bonded steel rod 3 mtr long 25.0 mm dia with 250-micron Copper bonded coating and UL listed. There should be terminal for connection of 150 x 50 x 6 mm with 4 holes of 12 mm dia along with 2 bags of 25 Kgs each of earth enhancing compound. The chemical compound should be tested and certified by any NABL accredited laboratory with 95 percent carbon content. The testing laboratory should be an ISO 9001 and 14001 certified. The earth enhancing compound should be IEC 62321. The ph value of compound should be 7-8. Electrode should be duly tested and certified by CPRI, Govt of India for a min short circuit current of 25 kA rms for 1 Sec. including necessary boring of suitable dia upto required depth in any type of soil for inserting copper rod and filling of chemicals and Poly plastic pit cover of material- polymer body & cover dimensions- 308 mm (L) x 308 mm (W) x 214 mm (H) bearing capacity 7.5 Ton approved from NABL approved Lab complete all as specified and as directed. Note:- (i) Earthing is to be done infront of the Engr-in-Charge. (ii) Test Results of earthing to be submitted by the contractor for all earthings. (iii) The Contractor shall have to give written guarantee for maintenance earth resistance of less than 1.0 Ohm for the period of 10 9ten) years after certified date of completion and shall bdeposited 2000/- per earthing as security deposit for a period of Ten (10) Years. (iv) Failing to maintain resistance of earthing less than 01.0 ohm , new earthing to be provided by the contractor with out any extra cost. (v) Necessary earth work, excavation shall be carried out in any type of soil strata, retuning, filling in and making good surronding area complete.

SUMMER APPLIANCES (DESERT COOLER)

HOT WATER SUPPLY

Supply and installation,commissioning and testing at roof top of building 'Solar water heating system (Flate Plate Collector) based on indirect transfer of heat of capacity 200 Ltr per day with electrical back up of 4 KW as per manufacturer's recommednations including hot water storage tank of capacity 500 ltrs and of 20 guage thickness stainless steel plate (having insulation of rock wool ) mineral wool 100 mm thick & cladding with aluminium sheet 24 SWG complete all as specified and directed.

COOLING APPLIANCES (WATER COOLER)

Supply and fixing self contained drinking water cooler fully stainless steel working with non CFC refrigerent of energy effiiency rating 3 star and above suitable for operation on 230 Volts 50 cycles AC supply having approx storage and nominal cooling capacity 40/80 Ltrs (approx storage capacty of 80 litre and normal cooling capacity of 40 litre per hour) and including making of PCC platfarm of suitable size as directed for fixing of water cooler complete all as specified and directed.

Supply and fixing wall mounted type line-Voltage stabilizer of capacity 1.0 KVA for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 Volts with accuracy of +/- 2.5% and speed of correction 8 volt per second complete all as specified and directed.

SEWAGE DISPOSAL

Supply, laying and testing of 150mm internal diameter of double wall corrugated (DWC) high density polythylene pipes (HDPE) and stiffness classes-8 (SN-8) with ISI marked (with CML no) with and including all fitting & jointing material for sewage line and laid in trenches as specified in IS 16098-2013 Part-2 complete all as specified and as directed. Note : Bedding of pipe shall be provide as per the construction methods ,and shall be strictly compiled as per clause No A-4 of Annex 'A' of IS 16098 Part II

ROAD/ PATH

Material and labour for providing and painting 2.5 mm thick road marking strip (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surace including all cost of material, labour, T&P, cleaning of road surface of dirt, seals, ils, grease and foreign material etc. complete all as specified and directed.

EXTERNAL ELECTRIFICATION

Supply ,fabrication, installation and testing of LT Panel factory made, TypeTest Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, out door type, weather proof, water proof, dust proof, vermin proof, shock proof IP 65 protection made out CRCA seet 3.15 mm thickness of suiitable size accommodate accessories with front and back double door opening/ lockable by the key from both side and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC /Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate and including the following accessories:-.

OUT GOING:- (a) 4 pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 18 KA including all fixing accessories with both ends spreader links - 02 Nos. (b) MCB TPN 32 Amps with breaking capacity 10 KA - 02 Nos (c) Multifunctional Digial type timer Switch (Astro type having longitude and latitude of Indian cities memory) 240 volts AC Single Phase - 01 No (d) Power contractor 4 Pole, 32 Amps, 415 Volts, 50 Hz - 01 No (e) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm x 150 mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of LT panel -01 No.

Supply and Fixing for LED Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 protection security light fitting luminaire of capacity 60 watts with high power LEDs as light source and electronic driver, 4kV inbuilt and 10 kV external surge protecton with Top opening driver cover for easy maintenance with warranty option of 5 years from date of installation with pre wired and necessary mounting arrangements and provision of 4 sq mm three core copper conductor cable multi stranded from fitting terminal to street junction box complete all as specified and directed

Material and Labour for Security light fitting bracket made out from GI Pipe 40 mm dia bore (dia), medium grade 1.50 metre long, bent to required shape and fixing to walls with and including suitable size Mild Steel Clamp, Nuts, Bolts as required duly painted with Two Coats of Aluminum Paint over a coat of Red Oxide Zinc Chrome Primer comlete all as specified and as directed. Note : Cost of MS clamp, Nuts, Bolts and painting is deemd to be included in the quoted Unit Rate.

Supply and Fixing for Security light junction box of size 205 mm x 255 mm x 112 mm for luminaries, weather proof made out of polycorbonate housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole/ wall mounting type comprising of MCB SP 10 Amps, with connector and fixed on pole with screws complete all as specified and as directed.

Boring of holes under road not less then 0.6mtr depth and 90mm dia hole by trenchless mannual boring by using augar and laying of necessary GI pipe of suitable dia including jointing and cable pulling complete all as specified and directed.

EXTERNAL WATER SUPPLY

Material and Labour for cutting DI pipes 100mm in position for insertion and including provision of Tee branches etc for 50 mm dia pipe line complete all as specified and directed

Material and labour for construction of brick masonry valve pit of internal size 60cm x 60cm x 70cm suitable for gate valves/ sluice valve upto 150 mm including necessary excavation and earth work, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock complete all as specified and directed. Note:- (i) Brick wall shall be 23 cm thick built in cement mortar (1:6) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450 mm from top shall be 20 mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls (iv) PCC coping shall be 15 cm thick in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC (v) Three coats of white wash to internal surfaces of valve pit shall be provided (vi) Depth of valve pit shall be reckoned from the top of PCC in foundation

SEWAGE TREATMENT PLANT

Supplying, Design , Construction, Hydraulic testing , Commissioning and giving satisfactory trials STP of capacity 06 KLD consisting of PMF Technology based along with the following accessories to the desired capacity of 06 KLD rated net output complete as turnkey job with all involved electrical and mechanical components for satisfactory performance of plant and required treated outlet water parameters as per E-in-C's Br olicy No 05/ 2023 dated 04 May 2023 complete all as specified and directed (a) Construction RCC tanks of following sizes:- (i) Septic tank of size - 2.80 Mtr x 1.40 Mtr x 1.50 Mtr - 01 No (ii) PMF tank of size- 3.30 Mtr x 2.20 Mtr X 1.20 Mtr- 01 No (iii) Filter Feed tank of size - 1.60 Mtr x 0.80 Mtr x 1.50 Mtr - 01 No (iv) Treated Water tank of size - 1.60 Mtr x 0.80 Mtr x 1.50 Mtr - 01 No (v) Chamber between PMF & FFT of size- 0.45 Mtr x 0.45 Mtr x 0.45 Mtr - 01 No (vi) Manhole Chamber made out of brick work im CM 1:6 suitable size with FRP Manhole Covers of size - (600 mm x 600 mm) - 05 Nos (b) Supply & laying of Stone course aggregate of following sizes:- (i) 8 " size (200 mm) - 1.50 Cu mtr (ii) 4 " size (100 mm)- 1.50 Cu mtr (iii) 2 " size (50 mm) - 1.50 Cu mtr (iv) Coarse Sand - 1.50 Cu mtr (c) Supply & laying of Bacterial Culture(suitable for degrading sewage- 720.00 KG (d) Supply & planting of saplings Canna Indica - 36 Nos (e) S & F for Non-clog submersible Raw sewege Pump,Single phase,230 V,50 Hz of discharge capacity 0.38 cum/ Hr @ 10 Mtr head complete- 02 Nos(01 W+ 01 S) (f) S & F for Submersible opern well pump set, Single phase, 230 Volts, 50 Hz for fresh treated water application discharge capacity 0.38 cum/ Hr@ 25 mtr head complete- 02 Nos (01 W+ 01 S)

(g) Supply and install for heavy duty chemical dosing system plunger type suitable to injet solution with suitable capacity, working pressure 10 Kg/cm2, comprising dosing pump coupled with 3 phase electric motor of suitable capacity, 1440 rpm assembly with Agitator in one motor , Agitator with stainless steel sweep blade duly FRP coated, FRP tank suitable capacity, complete unit mounted on heavy duty MS fabricated frame duly anti corrosive paint complete with chemical grade PVC NRV along with control panel for dosing pump suitable made of power coated MS fabricated box consting of LED indicater, digital Voltmeter, single phase preventor, high voltage, low voltage protection complete - 01 Job (h) S & F for of PSF (Pressure sand filter) of size 0250 mm in dia and height 1.30 mtr made out of FRP material suitable for withstand of 2.50 Kg/cm2 pressure with multi port valve and interlinking piping - 1 No (j) S & F for for ACF (Activated Carbon Filter) of size 0250 mm in dia and height 1.30 mtr made out of FRP material suitable for withstand of 2.50 Kg/cm2 pressure with with multi port valve and interlinking piping - Qty 1 (k) S & F for UPVC Pipe of sizes 25 mm dia & 40 mm dia suitable with stand the pressure 6 Kg/cm2 as required- 01 Job (l) S & F for copper conductor multistranded 3 core cable PVC insulated sheathed calble of size 2.5 Sqmm for motor connections from starter panel to motor control connector as required- 01 Job Note:- Components/ units/ Equipment/ accessory for PMF Technology based STP is as per design and indicative . However OEM can add/ alter/ omit the given components as per their design to achieve desired capacity and treated outlet water parameter with same technology as per E - in- C's Branch New Dehli guidelines/ policies .

M& L for Motor Control LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. Motor Control LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) complete including the following accessories:-.

Supply and laying for double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 (Part I and II) for protection of underground cables of size nominal outer dia 63 mm & nominal inner dia 50 mm dia with all fittings laid in trenches / road/ nallah or fixed along wall for cable protection all as specified.

RAIN WATER HARVESTING

Material and Labour 150mm bore PVC slotted pipes double socketed, in any length with suitable joints, laid in Bore hole for recharge pit and like complete all as specified and directed

Material and Labour for Boring 300mm dia for Bored cast in situ piles 16metre in any kind of soil/soft rock and getting out and disposal of spoil to a distance 50 metres using suitable method complete all as specified and directed.

FIRE FIGHTING SYSTEM

Supply and Fixing for 3 kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed Make: Kanex, Minimax, Aim-EX, Safeguard, Coffco, Variex

Supply and Fixing for 5 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed Make: Kanex, Minimax, Aim-EX, Safeguard, Coffco, Variex

Supply and Fixing for 9 litre mechanical foam type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted with gunmetal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed Make: Kanex, Minimax, Aim-EX, Safeguard, Coffco, Variex

Supply and Fixing for 9 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed Make: Kanex, Minimax, Aim-EX, Safeguard, Coffco, Variex

Supply and Fixing for Galvanized mild steel Fire bucket (Filled with dry sand & water) conforming to IS 2546: 1974 round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket complete as specified and directed

Supply and Fixing for Galvanized mild steel Fire hook bracket with 3 mtr bamboo handle painted with red colour complete as specified and directed

Supply and Fixing for Galvanized mild steel Fire Beater bracket with 3 mtr bamboo handle painted with red colour complete as specified and directed

Jeet Construction (BID ID -3446535)

M/s godara infratech and power industries (BID ID -3446908)