Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.7 LAccepted-AOC 26 A TARAPURI VISHNU NAGAR YAMUNA NAGAR | YAMUNA NAGAR | YAMUNA NAGAR | HARYANA | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹73.4 L+₹3.8 L (5.51%)Rejected-Finance 117 LENIN SARANI KOLKATA 700 013 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700013 | L2 | Rejected-Finance Rejected being higher than L1 | |
| 3 | L3₹74.0 L+₹4.4 L (6.26%)Rejected-Finance | L3 | Rejected-Finance Rejected being higher than L1 | |
| 4 | L4₹75.0 L+₹5.4 L (7.73%)Rejected-Finance 87 MARIUM MAHAL SADAR BAZAR BARRACK PORE 24 NORTH PGS | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | L4 | Rejected-Finance Rejected being higher than L1 | |
| 5 | L5₹77.1 L+₹7.5 L (10.7%)Rejected-Finance | L5 | Rejected-Finance Rejected being higher than L1 |
Tender Value
₹64.5 L
EMD Value
₹1.2 L
Closing Date
6 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
PROVISION OF STANDBY POWER SUPPLY AND RAISING OF FLOOR OF HIGH RESOLUTION DIRECTION FINDER (HRDF) AT 6 WING AF STN UNDER GE(AF) BARRACKPORE
2023_MES_583262_1
8417/BKP/AF OF 2022-23
Open Tender
Construction Works
Item Rate
270 days
GE AF Barrackpore
Class-C,
Category- a(i), a(ii) and a(v)
2 documents required · 2 mandatory
₹1,000
GE AF Barrackpore
₹1.2 L
Yes
11 May 2023
27 Feb 2023
8 Apr 2023
27 Feb 2023
6 Apr 2023
30 Mar 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outcomplete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and directed.
Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point as in soft/loose soil complete all as specified and directed.
Material and labour for sand cushioning with clean and dry river sand for protection of UG cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and directed. Note:- Punned down thickness shall be measured for payment.
Material and labour for brick protection cover to underground cables with sub class ‘B’ bricks of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat complete all as specified and directed.
Material and labour for forming embankments with moorum including raising (or lowering), spreading in layers n exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base of proctor density not less than 95% complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5sqm but n.exc 4sqm each complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), and removal of rubbish from the site complete all as specified and as directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish from the site complete all as specified and as directed.
Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour for cutting chases in brick wall, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed.
Material and labour for PCC (1:3:6), type C1, (using 20mm graded stone aggregate), as in coping, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and directed. Note:- Only inner girth shall be measured for payment.
Materials and labour for providing precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match and set in cement mortar (1:4) complete all as specified and directed.
Materials and labour for half brick thick brick work with fly ash bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.
Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Supply and fix solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet plain colour reinforced with MS square tube as per specification and drawing complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
Supply and fix 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
Supply and fix 75mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
Supply and fix 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
Supply and fix 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
Supply and fix 100mm size aluminium alloy handles, fabricated type extruded section complete all as specified and directed.
Supply and fix 150mm size aluminium alloy handles, fabricated type extruded section complete all as specified and directed.
Supply and fix 200mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Supply and fix mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
Supply and fix 15mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed.
Material and labour for mild steel TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Supply and fix anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Supply and fix anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
Supply and fix ball bearing for rolling shutters complete all as specified and directed.
Supply and fix safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
Material and labour for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber /GI /Aluminium framework with screws complete all as specified and directed.
Supply and fix 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decoratice choice laminations fixed to framed work complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 15mm thick screed bed in cement mortar (1:6) including rubbing and polishing complete all as specified and directed.
Material and labour for 100mm thick PCC (1:4:8), type D-2, (using 40mm graded stone aggregate) as in sub base of floor and pavings etc complete all as specified and directed.
Material and labour for 100mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in floor and pavings etc including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for 100mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in sub base of floor and pavings etc including finish the surface even and rough to receive top layer complete all as specified and directed.
Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for 60mm thick and M-35 Grade machine pressed precast cement concrete interlocking paver blocks of any shape and size confirming to IS-15658-2006 including 50mm thick sand cushioning complete all as specified and as directed.
Material and labour for flush pointing to brick walls in cement mortar (1:4) complete all as specified and directed.
Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Materials and labour for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Materials and labour for complete removal of existing treatment on walls and applying two coats of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.
Supply and fix 3mm thick sheet glass,ordinary quality with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
Supply and fix in repair vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts and making all necessary connections complete as specified and directed.
Supply and fix 15 mm GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable GI pipe complete all as specified and directed.
Supply and fix 20 mm GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable GI pipe complete all as specified and directed.
Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) complete all as specified and directed.
Supply and fix in repair vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste pipe, chain & plug and porcelain stopper but with brackets and 32 mm bore waste coupling PTMT (minimum weight 45gms) including cutting for and pinning in ends of brackets complete all as specified and directed.
Supply and fixing 150 mm bore salt-glazed stoneware drain pipes grade 'A' laid in trenches and jointed complete all as specified and directed.
Material and labour for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
Materials and labour for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.
Supply and fix tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
Supply and fix in repair 15 mm dia stop valves, fancy type, chromium plated with long shank and cup, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.
Supply and fix in repair 20 mm dia stop valves, fancy type, chromium plated with long shank and cup, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.
Supply and fix in repair 15 mm dia PVC connection pipe with PTMT nuts of length 450 mm complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid on floors complete all as specified and directed.
Supply and fix in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.
Supply and fix in repair 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
Supply and fix 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
Material and labour for rolling and consolidating formation surfaces in cutting with hand roller of capacity 0.2 to 0.5 ton complete all as specified and directed.
Material and labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade `B' complete all as specified and directed.
Construction of 100 users RCC septic tank, M-30 (design mix) including excavation, PCC in foundation, RCC in wall, baffle wall, beam, roof slab etc with all works complete all as specified and shown on drawing No CESZ/2020/TD/ST-07.
Construction of brick masonary soak well for 100 users including excavation, PCC in foundation, solid and honey comb brick work, brick bats, RCC in band, column, cover slab etc with all works complete all as specified and shown on drawing No AF/TD/STRU/236.
Material and labour for light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including 1.2mm thick pressed steel terminal boxes in recess to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing switches, sockets and regulators with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) stranded copper conductor as earth continuity wire and connected to earth dolly complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.
All as per item No. 76.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-.
All as per item No. 76.00 here-in-before but for one five pins 5 Amps socket outlet point on same board and -ditto-.
All as per item No. 76.00 here-in-before but for 15 amps socket outlet with 4 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 4 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dolly and -ditto-.
Supply and fix switch piano one way 5/6 amps 240 volts, single pole complete all as specified and directed.
Supply and fix switch socket combination 2 in 1, 5 pin , 5 amps flush type complete all as specified and as directed.
Supply and fix switch socket combination 5 in 1, 5/15 amps socket complete all as specified and as directed.
Supply and fix socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and as directed.
Supply and fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
Supply and fix ceiling rose, 3 terminals, fabricated of PVC/Polycarbonate, isolated body complete all as specified and directed.
Supply and fix delux stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.
Material and labour for concealed sub-main wiring comprising single core , 2 runs of 6 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 volts grade drawing in and including appropriate dia. in PVC conduit and its fittings including provision of 1x6 sqmm nominal cross sectional area, single core FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified and directed. Note :- (i) Extra length of cables/ wire required for connection to MCBs/DB's shall be included in quoted rate. (ii) Cuttings /chasing of wall etc and making good the disturbed surface shall be measured and paid separately under respective items. (iii) 3 runs of 6 sqmm cable and 1 run of PVC conduit shall be measured as one unit.
Material and labour for concealed sub-main wiring comprising single core , 2 runs of 2.5 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 volts grade drawing in and including appropriate dia. in PVC conduit and its fittings including provision of 1 x 2.5 sqmm nominal cross sectional area, single core FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified and directed. Note :- (i) Extra length of cables/ wire required for connection to MCBs/DB's shall be included in quoted rate. (ii) Cuttings /chasing of wall etc and making good the disturbed surface shall be measured and paid separately under respective items. (iii) 3 runs of 2.5 sqmm cable and 1 run of PVC conduit shall be measured as one unit.
Supply and fix in repair single pole and neutral (DP) enclosure with a two pin and earth plug and socket complete with one single pole MCB 240 V, 20 Amps "C" series complete all as specified and directed. Make:- LEGRAND Cat No 5078 11 or equivalent model of SCHNEIDER / SEIMENS / HAGER / L&T.
Supply and fix sheet metal enclosure TPN DB 4 ways double door having facility to fix MCCB in incomer and MCBs in outgoing, IP-43 with metal door type complete fitted with bus bars, neutral links, blanking plates etc.complete all as specified and directed.
Supply and fix sheet metal enclosure SPN DB 12 ways double door having facility to fix MCB in incomer and MCBs in outgoing, metal door IP-43 type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed.
Supply and fix sheet metal enclosure SPN DB 8 ways double door having facility to fix MCB in incomer and MCBs in outgoing, metal door IP-43 type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed.
Supply and fix MCB SPN, 240 Volts, of 40 to 63 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.
Supply and fix MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity "C" seriescomplete all as specified and directed.
Supply and fix MCB TPN, 240 Volts, 40 to 63 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.
Supply and fix in repair energy efficient tube light fitting with LED batten type luminaire with LED tube rod, extruded aluminium body with completely pre wired with driver internally fixed and decorative caps , 20W, 230V , with connector blok, etc., complete with all accessories and connecting up with suitable size, 1.5 sqmm three core copper conductor flexible wire, screws, gutties etc.complete all as specified and directed. Make:- Philips / Bajaj / Havells / Crompton / MAGIK
Supply and fix in repair energy efficient tube light fitting with LED batten type luminaire, extruded aluminium body with completely pre wired with driver internally fixed and decorative caps , 10W, 230V , with connector blok, etc., complete with all accessories and connecting up with suitable size, 1.5 sqmm three core copper conductor flexible wire, screws, gutties etc.complete all as specified and directed. Make:- Philips / Bajaj / Havells / Crompton / MAGIK
Supply and fix building LED street lights of 35 Watt IP 65/66 outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver including thermal management in multiple optics complete all as specified and directed. Make:- Philips / Bajaj / Havells / Crompton / MAGIK
Material and labour for street light bracket made of 1.5 RM length of GI pipe of medium grade of 40 mm dia in proper shape, bend, threaded and drilling holes for wire entry and MS clamps (02 Nos) of suitable size in proper shape cmplete all as specified and directed.
Supply and fix 300mm sweep exhaust fan AC single phase 230/240 volt. along with metal blade powder coated metalic finish with louvers, low noise including necessary electric connection complete all as specified and directed.
Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. 5 star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fix cable junction box 130x180x77mm in size, for 4-10sqmm cable size, made out of thermoplastic sheet having IP-66 protection for outdoor installation fixed with integrated membranes for cable entry complete all as specified and as directed.
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 35 Sqmm, 3.5 core, 1100 Volts (earthed) grade, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.
All as per above Item No 103.00 but size of 50 Sqmm 3.5 core and -ditto-.
Material and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.
Material and labour for earthing continuity of 20 x 3.15 mm copper strip with saddles and fixing screws on porecelain insulator/ spacer fixed at every 1 mtr length for extension of earthing strip on roof/wall and joining the same with existing/new earth test point complete all as specified and directed. Note : Joining of copper strip shall be made by brazing after fixing of nuts & bolts complete all as specified and directed.
Material and labour for galvanised iron strip of size 32 x 6mm with saddles and fixing screws on poreceling insulator/ spacer fixed at every 1 mtr length for extension of earthing strip on roof/wall and joining the same with existing/new earth test point complete all as specified and directed.
Supply and installation of advance encapsulated compound based CPRI tested maintenance free, pipe-in-pipe technology upgraded (zinc & alloy coated), zinc coating ( 80-100) microns with pure zinc (99.9%) & alloy coating (200-250)microns. Earthing system conforming to IS-3034. The outer and inner pipe should be 76.2 mm & 41.9 mm, 3mtrs length, zinc coated with additional special alloy coating 300mm on the top side for additional corrosion protection of the terminal. The annular space between the pipes being filled up with COMPACT FILL(CF) (Crystalline Conductive Compound). The COMPACT FILL (CF) mixture which is machine pressed in the pipes should not disintegrate or collapse when outer pipe corrodes. The inner pipe should be extended with terminals for connectivity. The job includes digging the pits of dimension 60cm X 60cm up to depth of 3.1m and replace the soil with low resistive soil as approved by Engr-in-Charge, then make a bore of dia 200mm of depth 3.1m and refilling the same by conductolite back fill compound (Ground Enhancer), the BFC should be eco friendly it should not contain environmentally hazardous material / metal having RoHS Certification from NABL accredited lab. Good earth is to be arranged to fill the excavated pits by mixing the same with BFC 2 bags including FRP (Fiber reinforced plastic) light weight, high mechanical strength, chemical resistance with detachable easy locking lid of size 250mm X 250mm of thickness 2mm,and the earthing should be installed by applicator of the manufacturer / authorised dealer complete all as specified and directed. (Make : ASHLOK / CAPE / MACKMET).
Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 32 x 6 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion complete all as specified and directed. Note:- GI strip upto 7.5m length including testing shall be included in quoted rates.
Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 15 mm bore (medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10 cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion complete all as specified and directed. Note:- GI wire upto 7.5m length including testing shall be included in quoted rates.
Supply and fix fire alarm cable plain annealed solid copper conductor wire to BS EN 60228, class 2, primary insulation of glass mica FR tape, secondary insulation of high performance PVC type - C, earth wire of annealed tinned copper to BS EN 60228 electrostatic screen of aluminium fire barrier with 100% overlap, FRLS PVC ST-2 sheathed 2 core wire of size 2.5sqmm drawn on ceiling/floor/conduit or casing capping including all kind of PVC conduit pipe / casing caping and accessories complete all as specified and directed. Note: Cable connection to all the fire alarm units, sensors, indicators, panels and modules shall deemed to be included in quoted rate.
Supply and fix Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules complete all as specified and directed.
Supply and fix Detectors Complying with and type certified to EN - 45 addressable type multisensor detector with heat and smoke combination with base with self built intelligence as per IS: 11360 complete all as specified and directed.
Supply and fix Addressable control module complete all as specified and directed.
Supply and fix Addressable electronic sounder cum strobe complete all as specified and directed.
Supply and fix Addressable manual call point re-settable type with alarm LED complete all as specified and directed.
Supply and fix Remote response indicators unit complete all as specified and directed.
Supply and fix Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB complete all as specified and directed.
Supply, installation, testing and commissioning of silent diesel driven engine generating set with acoustic enclosure and AMF panel of capacity 10 KVA, 3phase with air cooled engine at 1500 RPM brushless frame heavy duty industrial type complete with all standard engine accessories including alternator coupled with engine and control panel with all other electrical components, fuel tank with level indicators (fuel tank with capacity for full load non stop 08 hours running of generating set), base frame coupling, RPM meter, hour meter, temperature gauge meter starting lead acid batteris of 12 Volts, two Nos, single initial charged, battery of capacity 100 Amp Hour including suitable size of copper cable with terminal leads, self starter 12/24 Volts, Alternator 12/24 Volts with ampere meter and all other mountings and accessories such as silence exhaust pipe wrapped with best quality asbestos rope including necessary PCC foundation (1:3:6) type C-2 (using 40mm graded aggregate) of suitable size 3.5m x 2.5m x 1m height above GL and 0.75 M below ground level complete all as specified and directed.
Note:- (i) Loading unloading and transportation shall be included in quoted rate (ii) Installation charges, testing and commissioning shall be borne by the contractor. (iii) On top of the PCC foundation, 100mm height of RCC with the help of 10mm steel bar shall be done by the contractor (iv) Contractor has to get approval of drawing and specification of DG set from GE before procuring of DG Set. (v) Contractor has to top up the fuel during testing and commissioning at site for continuous run upto 11Hrs by his own cost. (vi) Cost of all the cable connections from AMF panel to LT panel board and upto DG set shall deemed to be included in quoted rate.
Supply installation, commissioning and testing including providing all necessary electrical connection, LT feeder pannel boad (CPRI approved), outdoor type, double door, factory made out of 3.15mm thick CRCA sheet of size 1.5 m x 1.00 m x 0.5 m deep having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 Nos legs 0.5 meter length with cable entry and exit circular hole with cable gland & gasket at bottom complete including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with danger notice plate of 1.6mm thick mild steel sheet, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete including necessary excavation work for taking out cable loop and refilling and comprising of the following accessories:-
(a) Anodized Copper bus bar of capacity 400 Amp -04 Nos (b) MCCB 200Amp fixed type, 415 Volts 4 pole, 36 KA - 01 No (In coming). (c) MCCB 100 Amp fixed type, 415 Volts 3 pole, 36 KA - 02 No (Out going). (d) MCCB 80 Amp fixed type, 415 Volts 3 pole, 16 KA - 01 No (Out going). (e) Indicator lamp LED type (set of three Red,Yellow,Blue) -01 Nos Note:- Quoted rates are inclusive of following:- (i) Contractor shall submit the design of the panel alongwith accessories for approval of GE before fabrication. (ii) Plateform of suitable size in PCC (1:2:4) type B-1 (using 20mm graded stone aggegate) minimum 40 cm below NGL and 45 cm above NGL.
Material and labour for forming embankments with earth including raising (or lowering), spreading in layers n exc. 30 cm thick, watering, ramming / rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base of proctor density not less than 95% complete all as specified and directed. Note:- Approved earth will be obtained from outside of MOD land.
BHARUKA ENTERPRISES
TAPAS ENGINEERING CO
JHAWAR SUPPLIERS
BUSINESS SYNDICATE
BHAUMIK CONSTRUCTION
ROY CONSTRUCTION
Tirupati Buildcon Pvt. Ltd.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .