Construction of 100 Bedded Girls Hostel at Govt. Degree College at Baramulla (Gender inclusion and Equity initiative)

Engagement of labour for site clearance

Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work..

Supply and filling of dry stone soling in foundation trenches/under floors tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for columns,pillars,piers,abburtments,posts and struts including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls including all carriages.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Supplying and filling in plinth with fine sand/ GSB Boulders under floors including, watering, ramming, consolidating and dressing complete, including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all carriages upto site of work

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including all carriages.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, , including all carriages. Size of tile 600x600 mm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) including all carriages.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class Kail wood including all carriages

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages.

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood including all carriages.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood

Providing and fixing 35 mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class Kail wood including all carriages.

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing of Anodised Alumunium Hardware fittings of approved quality and manufacture with all fittings and fixtures incld.carriages complete (Brass Handles 12'' long)

(Brass Handles 9'' long)

L-Drop12'' Long

Tower Bolt 9'' Long

Tower Bolt 6'' Long

Handles 6''

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages

Providing & fixing colour coated (Hi-Rib) G.I sheet roofing 0.50mm thick incl. vertical/curved surface fixed with polymer coated J or L hooks bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washer and over lapping of sheets complete in horizontal vertical trusses incl. cutting to size and shape wherever required including Ridges or Hips of 60 cm overall width colour coated sheets 0.50mm thick and valleys of 90 cm width colour coated sheets 0.50mm thick etc complete as per the directions of Incharge Engineer. including all carriages.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing plained eaves boarding. 250x32 mm (nominal size )

Providing and fixing of 10mm thick Ready made wooden Panelling in sofits including cost of Budloow Wood Frame Work 50 x 40mm Section @ 600mm c/c bothways including cost of screws, etc in Softs, walls, gables, etc complete as per directions of engineer in charge.

Dry random rubble masonry with hard stone in foundation and plinth With bond stone.

Construction brick massionary manhole with 7.5 class designation bricks in cement mortar 1:4 (1 cement; 4 fine sand ) CI cover with frame , foundation concrete 1:3:6 (1cement : 3 fine sand :6 graded stone aggregrate 20 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand ) finished smooth with a floating coat of neat cement on walls and bed concrete etc complete as per standard design: as per the directions of site engineer incld all cost and carriage Inside dimensions 450x450 x600 mm deep

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. (of approved quality)

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and Fixing of PVC pipes with fittings like P-bend,D-bend,P/F-Trap, collar, junction, Door Tee,Reducer etc (B-Type) of approved brand and manufacture (Prince/ Supreme or Equivalent brand) incld all carriages 150 mm dia

Providing and Fixing of PVC pipes with fittings like P-bend,D-bend,P/F-Trap, collar, junction, Door Tee,Reducer etc (B-Type) of approved brand and manufacture (Prince/ Supreme or Equivalent brand) incld all carriages 100 mm dia

Providing and Fixing of PVC pipes with fittings like P-bend,D-bend,P/F-Trap, collar, junction, Door Tee,Reducer etc (B-Type) of approved brand and manufacture (Prince/ Supreme or Equivalent brand) incld all carriages 75 mm dia

Providing and fixing of PVC pipe, fittings(B-Class) of Prince/Phenolex or equivalent make of following size to soil/waste/ventellating pipes as directed by the site Engineer including all carriages. Door bend /Door Junction/Door Tee 100mm Plain Bend 100mm

100 mm dia Door bend

100mm dia plain TEE

100mm dia door bend

Reducer 100mm to 75mm

75mm dia plain Bend

75mm diaFloor Trap

Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 marked triple layer indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and base support for tank (Sintex, Electroplat, Star, Lotus or equivalent having valid ISI license) including all carriages.

Supply and installation of satin finish stainless steel AISI 304 stainless steel handrail and balustrade system having 50mm dia tube handrail (1.5mm gauge) weight 3.70 kg, erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at max c/c distance of 600mm complete with all necessary bends and terminations complete, with cover plate, fixings, end terminations, custom bends, as manufactured by Dline or approved equivalent. Height shall be 1050 mm above the finished skirting level complete as per architectural drawings, pattern & design to be approved by Engineer-in-charge

Supply and installation of satin finish stainless steel AISI 304 stainless steel Posts having 100mm dia tube, erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at corners complete, as manufactured by Dline or approved equivalent & shall be fixed above the finished level complete as per architectural drawings.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc 20mm nominal outer dia pipes.

25mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing of Two in One Angle valve of aproved make including all accessories complete

Providing and fixing of wall mixer of aproved make including all accessories complete (Jaguar)

Providing and fixing of health Faucet with chain of aproved make including all accessories complete (Jaguar)

Providing and fixing of CP Towel Rod 60mm Long of aproved make including all accessories complete (Jaguar)

Providing and fixing of CP soap case of aproved make including all accessories complete (Jaguar)

Providing and fixing of CP connection 600mm-450mm long of aproved make including all accessories complete

Providing and fixing of CP grating of aproved make including all accessories complete

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge.

Providing and fixing of stainless steel paper holder with stand of aproved make including all accessories complete

Providing and fixing of Exaust fan 350x300 mm of approved quality and make like Bajaj,Havells or equivalent incld. necassary fittings complete job incld. Carriages

Providing & Fixing of 1.0 HP unidirectional flow water Motor with all fittings like inlet and outlet connections , electric controlled setup with service line including making of Plateform as per requirement covered with CGI Sheet fixed over angle iron frame work with all fittings as per the directions of Engineer In-Charge Complete job including carriages upto site of work ( Kirlosker, Usha, Cromptom Greaves, Havelles or equivalent)

Providing and fixing of water heating geysers of approved brand & quality (Venus/ Jaguar/ Racold or eqviuallent) with all necessary fittings and fixtures complete Job. 50 Ltr capacity including all costs and cariages complete

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Supply and laying of Manhole frame and cover cast iron heavy duty (2'-0''x2'-0'') of specified design and dimentions as directed by the Engineer incharge at site

Carriage of materials by mechanical means (15Kms lead) Sand

Aggregate

Stone Soling (12Kms)

Bricks (20 Kms lead)

Walling Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work

Supply and filling of dry stone soling in foundation trenches/under floors tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand )

12mm Cement plaster of mix in 1 : 4 ( 1 cement : 4 coarse sand) including all carriages.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and inluding priming coat with water thinnable cement primer including all carriages.

INTERNAL ROADS Construction of Granular sub base/base/ surface course with local material by mix in place method normal construction of granular sub base by providing local material spreading in uniform layers eiht mortor grader on prepared surface, mixing by mix in place method with rotavator at nce and cmpacting wiht smooth wheel roller to achieve the desired density complete as per clause 401.4 as per Technical specifications Clause 408.

Supplying and stacking at site Graded crushed stone aggregate of size 63 mm to 45 mm

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

Supply & stacking of stone screening - chippings at site 13.2mm nominal size (Type-A) including all leads, lifts cost & carriages of materials upto site of work complete job.

Supply & staking of moorum / binding material at site. including all leads, lisfts cost & carriages of materials upto site of work complete job.

Carriage of materials from source to site of work by mechanical transport from source to site of work. Stone Agg. 15 Kms lead

Stone screening & Moorum 15Kms

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts,laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm.

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. including all carriages.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. including all carriages

Providing and laying 6 mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road Rollar all complete. including all carriages

Footpath Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) including all carriages

Supply and filling of dry stone soling in foundation trenches/under floors tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Part-A (Internal Electrification) Wiring for Laght point Exhaust fan/Bell point with (P+N+E) 311.5 sqmm FRES-H PVC insulated Multi strand Copper conductor single core cable Havells Polycals Anchor Eq Make as approved by SDO) in existing surfact/recessed Conduits (lacluding Cost of Conduit) laid in slahs with 01 No.of 6 Amp Modder Sach Molalar Platz, Cover in front & suitable Gl box etc ISO/IEC Certified Lavells(Crab-Tree)/ Legrand(Myris)/Anchor Rooma Plus/Schinosen Lava) ABII Make & shall be approved before execution of work by EIC Sapphong and Firing of Indicate as required, ISO/IEC Certified Havells (Crab-Troe)/ Legrand(Myris)/Anchor Rooma Ples/Schneider(Livia) ABB Make & shall be approved before execution of work by EIC

Supply & fixing of indicator as required , ISO/ IEC certified Heavells (Crab-Tree) Legrand (Mysis/ Anchor Rooma plus/ Schneider (Livia) make and shall be approved before execution of work.

Wiring for Ceiling fan point with (P+N+E) 3x1.5 sq. mm FRLS-H PVC insulated Multi strand Copper conductor single core cable(Havells/Polycab/Anchor/ Eq Make as approved by SDO) in surface'recessed Conduits(Including Cost of Conduit) with 01 No. of 6 Amp Modular Switch, Modular Plate, Cover in front and suitable GI Box etc ISO/ IEC Certified Hevells/Crab-Tree)/Legrand Myris) Anchor Rooma Plus/ Schneider (Livia) Make & shall be approved before excution of work.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modelar plate etc.as required ISO/IEC Certified of Havells/Crab-Tree)/ Legrand Myrisi/Anchor Rooma Plus/Schneider(Livia)/ABB Make & shall be approved before execution of work

Wiring for Power Plug with (P+N+E) 3x4 sq.m FRLS-HPVC Insulated Multi strand Copper Conductor single core cable in surface Recessed Conduit (Havells Polycab /Anchor Eq. Make as approved by SDO)

Supplying and Fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A moder switch, connections etc. as required, ISO/IEC Certified Havells(Crab-Tree)/ Legrand (Mysis)/Achor Rooma plus/ schneider Livia) (ABB Make & shall be approved before execution of work

Wiring for 6 Amp plug (computer point) with (P+N+E) 3x2.5sqm FRLS-HPVC insulated Multi strand Copper Conductor single core cable in surface Recessed Conduit (Havells/Polycab/Anchor Eq Make as approved by SDO)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, incuding P/F 2 No. 3 pin 5/6 A modular socket outlet and 2 No. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells (Crab Tree Legrand Mysis Anchor Rooma Plus Schneider (Livia) Make & shall be approved before execution of work

Wiring for Sub man Wiring along with earth wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface Recessed medium class PVC conduit (Havells/Polycab/ Anchor Eq Make as approved by SDO) & shall be approved before execution of work. 4x10 sqmm + 2x6 sqmm P+N+E for power point sub main in one run from main panel to distribution boards

2x6 sqmm + 1x6 sqmm P+N+E for lighting /invertor sub main in one run from main panel to distribution boards

2x2.5 sqmm + 1x5 sqmm P+N+E for lighting /invertor sub main in one run from Switch board to distribution boards

supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required of Havells (Crab-Tree) Legrand/ Myris) Anchor Rooma Plus/ Schneider (Livia) make

Supply / fixing testing & commissiong of 6 Amp to 32 Amp Rating SP 240 volt *C* curve 10K, miniature circuit breaker suitable for inductive load of following poles in existing MCB DB complete with connections (L&T / simeans /legrand /ABB/ Schneider make)

Supply / fixing testing & commissiong of following rating double pole (P+N) 240 V *C* 10K miniature circuit breaker (MCB) in the existing MCB DB complete with connections (L&T/ sienses/ Legrand/ ABB/ Schneider make) 32AMP

Supply /fixing/ testing and commissioning of 63 Amp , 4 pole (TPN) 440V, *C curve 10K in the existing TPN DB complete with connections (L&T/ Siernens/ Legrand/ ABB/ Schneider make

Supply and fixing of MCB 8way horizental typed, steel sheet double door distribution board 5PN 240V on surface/ recees complete with tinned copper bus bar neutral bas bar, earth bar, din bar, interconnection,powder painted including earthing etc as required (L&T/ Siernens/ Legrand/ ABB/ Schneider make

Supply and fixing of MCB 12way (4+36) horizental typed, steel sheet double door distribution board TPN 240/ 415V on surface/ recess complete with tinned copper bus bar neutral bas bar, earth bar, din bar, interconnection,powder painted including earthing etc as required (L&T/ Siernens/ Legrand/ ABB/ Schneider make

Supply and fixing of MCB 8way (4+24) horizental typed, steel sheet double door distribution board TPN 240/ 415V on surface/ recess complete with tinned copper bus bar neutral bas bar, earth bar, din bar, interconnection,powder painted including earthing etc as required (L&T/ Siernens/ Legrand/ ABB/ Schneider make

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value Supply installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with main-hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job For AVR/MainPanel)

Supply(lnstallation/Testing and Commissioning of 36-40 watt ultra slim LED surface mounted lighting panels (600 mm x 600mm Square) having CRCA Body (Cornmercial type) minimum lumens 100 lm/w the luminure housing should be crca/almunium and the luminior optics shall have a high efficency with transmittance average life of 50000 hrs operating temperature-10C to +45 C. The Fixture should have in-built Surge Protection of 2kV,440V Protection. Certification- LM79 & LM80 test report should be from govt approved In-house NABL lab/Govt. of India authorised lab. The job includes AMC (reckoned frorn date of successful commissioning) of lighting fixtures for a period of Two year, which includes replacement of fixtures of Philips/Wipro Havells Jaquar/HG Make as approved by EIC.

Supply Installation/Testing and Commissioning of 18W + LED Surface Mounted Panel light luminary fitting round shape with minimum system lunes efficacy of 100 lm/W with Pressure Die cast Aluminian Heat Sink and PF>0.95 THD<10% CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at 170. The Input voltage range shall be 220V to 240V. The Fixture should have lo-buil Surge Protection of 2kV & 440V Protection, Certification:-1M79 & LM80 test report should be from govt. approved In-house NABI, lab/government of India authorised lab. The job includes AMC (reckoned from date of saccesful commissioning) of lighting Fixtures for a period of Two years, which includes replacement of fixtures of Philips/Wipro/Havells/jaguar HG Make as approved by EIC.

Supply/ installation/Testing and Commissioning of 9-10 Wat. LED Bod Light Light fitting with Alaminium Body of Philips/Havells/Wipro/Jaguar HG Make is approved by EIC including making of necessary connections including cost of Ceiling Rose, Siken wire also with round plates Etc complete,

Supply/Installation/Testing & Commissioning of 10W LED Mirror Light of Havells/Bajaj/jupiter/Jaguar/MG Make an duly fitted on walls including making of necessary Connections & sample shall be approved by EIC

Providing & Fixing of IKO8 IP-66 protected high power LED 50 Watt flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 wat each. Integrated ported driver as a unique BIS R number having efficiency more than 85% and is compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy -115 Isvat. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @300 V AC and Auto resetting Safety Power Factor >0.95, THD(1) <10%, driver current-750mA driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min 4KV internal and 10KV external but inside driver compartment, System life of 50000 burning hours with 70% of intial Lumens maintained, CR-70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved Embossing Screen printing on die cast housing to allow tracrability/authenticity. Fixture shall be 15 10322 Complianced OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures (LM79/LM80) Certificate/ report with liable warranty of product/ accessories from OEM shall be submitted All as per pre approved by Engineer in charge For additional technical parameters of products work, refer Annexare "A" attached with this BSR:-High Power LED Flood Light Minimum lumen output 6200 Im of /Havells/Wipro/Philips/HG Make as approved and to be installed on outside block including S/F of suitable size of Geyser bolt. The job further includes replacement waranty of fixture (if damaged/burnt out what to ever reason) for a period of two years reckoned from date of successful commissioning/handing over of site to intending department.

Supply/Installation/Testing and Commissioning of BLDC 1200 mm sweep, ceiling fan with 3 No. blades, 30 cm long down rod, 02 No. canapies, shackle kit, Power Factor not less than 0.9, Service Vallve including safety pin, nut bolts, washers, temperature rise-75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells/Polycab/Orient Make (3-Star)

Supply/Installation/Testing and Commissioning of 225-250mm Shutter Type,320 Cu. m/Hr.AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37DB including connection etc USHA/Anchor/ Polycab/Orient Maker.

Supply/Installation Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified.

Supply/Installation/Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683 suitable for " B" and 'C' class fines-inflammable liquids, Gases like L.P.G acetylene and electrical fires

Supply/Laying of 25/32mm Dia PVC Conduit of Anchor/Ravinder/ Polypack/Finolex Make with other accessories like bends,etc complete to be laid is wall for downs and finishing the surface to its original shape by cemeat mortar plastering/Wall putty/Tile with same Colour Paint etc

Supply and fixing of single pole blanking plates on existing MCB boxes excluding cost of boxes

Supply and fixing of bakelite hylam sheets of required size including cutting filling with S/F screws etc

supply & fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc etc as required Havells/ Legrand/ Panasonic/ Anchor/ Schneider

Supply/Installation/Testing & Commissioning of 3-phase 20 KVA,50 Hz Oil cooled unbalanced type Voltage Stabilizer SERVO control of Approved brand COPPER wound of Chinar/AE/Cosco Make ISI/ISO/IEC certified for smooth functioning/constant voltage supply having Technical Specifications: Input voltage(Ph-Ph) ranging from 157 Volts to 470 Volts and a balanced output Voltage of 420 Volts, +2% Buck Boost Transformer Copper wound 99.9%,OIL Immersed COOLING OIL, High cut/Low Cut/Time delay/Over Cut through Micro Controller and Spike Protection having 01 No. 63 Amp 3 Pole TP 36kA from input side & 63 AmpTPN from output side Complete job. (For Lighting/Computer Points Only)

Providing and Laying of shock proof rubber mats of 2mx1mx12mm thick in size of Standard Make.

Supply/Laying/Connecting and Commissioning of 185 sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/RR Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM

Supply/Installation/Testing & Commissioning of 10KVA Digital Inverter Pure Sinewave Solar Inverter With ISOT Technology, Intelligent Load Sharing & BIS Certified with technical specifications of:- Rating= 10KVA (8.4 Kilo. Watt) ( i). Advanced Battery Management (ABM) for Battery life and Quick Charging (ii). Micro processer based PWM Technology using HI-Grade IGBT (iii). LED &LCD Display Indications (iv). Best Suited for most High Capacity Sophisticated Applications, (v). Generator Compatible (vi). Inbuilt Time Delay Relay (TDR) Model: UPS JM SW 11000i/180v Digital +Sine wave) DC voltage with recommendation of 180V (a) 10KVA with 15X12-180 Volt Digital INVERTER EXIDE/AMRON/Luminous Make with 2 Years Warranty

Supply/Installation/Testing/Commissioning of 200Ah, 12V Tubular battery of EXIDE/AMRON/Luminous Make (with 36 Months Warranty)

Supply/Installation of Battery Trolley dully fabricated of 40x40x5mm ANGLE IRON for accommodating &resting of 15 No.tublar Batteries & for Inverter resting

supply/Installation/Testing and Commissioning of 100 Amp Four Pole rotatory bypass switch of Havells / Siemens/ABB/Schinder/L&T make 1 no. with KISOK for bypassing 20 KVA AVR

Supply/Installation/Testing and Commissioning of AC/DC Bells of standard make with its batteries

Supply and Fixing of Modular 32Amp industrial Socket outlet having fitted with 32 Amps DP MCB and Top with Modular Plate, Cover in front & suitable Gl box

FIRE FIGHTING Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to 15 3589/15 1239 Including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the 1 wall/celling with sultable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 25mm dia

80mm dia

100mm dia

Supplying and fixing single headed internal hydrant valve with Instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast Iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap and chain as required: Single headed Stainless Steel

Supplying and fixing orifice plate made out of 6 mm thick Stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of extemal and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia 4 male and female couplings duly bound with Gl wire, rivets etc. conforming to 15 636 (type-A) as required: Stainless Steel

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to 15 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic 5 (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for foxing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and Socket

Supplying and fixing of fire brigade inlet of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia M5 pipe connection conforming to IS 904 as required: 2way-100 mm dia M.S. Pipe

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to 7 riser, drain arrangement with 25 mm dis gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing and placing on terrace polyethylene water storage tank of capacity 5000 litres, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings and the base support for tank

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Stainless Steel

Providing and fixing Weather proof hose cabinets for Internal hydrant fabricated from 16 & MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos.15m long 10 hose, 1 No branch pipe and one fireman's ave. The cabinet shall be painted 7 with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose written on front including sultably mounted on a raised masonry platform as required. (Approx 0.75mx0.6 ms 0.25 m).

Providing and fixing standard fireman's axe with heavy Insulated rubber handle conforming to 15: 926 complete.

Supplying, installation, testing and commissioning of electric driven terrace 12 pump sultable for automatic operation and consisting of following. complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronte Impeller with stainless steel shaft, mechanical confirming to 15:1520 b) Sultable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. a) 900 lpm at 35 m Head

Supplying, fixing, testing & commissioning of double flanged sluica valve of rating PN 1.G with non rising strindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required 100mm dia

Providing, Installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gaskat, GI bolts, nuts, washers etc as required: 100mm dia

Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 100mm dia

Providing and fixing pressure switch (for operation at 0-25 kg/cm2) with 18 required fittings and accessories complete

Supply, Installation, testing & commissioning of pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 complete and of dial dia 150 mm

Supply and Installation of CO2 fire extinguishers consisting of Aluminium eylindricain body, (besring IS: 15683 marking) squeeze lever discharge valve fitted with intemal discharge tube, high pressure discharge hose, discharge 20 nozzle, suspension bracker, confirming to 15 934 fitished extemally with red enamel paint and liked to wall with brackets with rawl plug/dash fasteners complete with internal charge. The Carbon-di-oxide filled in the cylinder must be as per IS 15222. capacity 4.5Kg (ISI marked)

Supplying Installation, Testing and Commissioning of MAP 90 ABC Type 21 Fire Extinguisher 4.0 Kg. Capacity (5) Mark(15:15583) suitable for Class A/B/C Type Fires

Supplying and Laying of 1 No. XLPE insulated and XLPE Power Cable of 1.1 KV Grade of Following Sizes in the existing Cable Tray/RCC/Hume/DWC/Stone ware/Metal Pipe as Required 4CX 25 Sq.mm Aluminium Armoured

12C X 2.5 sq mm mm Copper Armoured

4CX2.5 Sq.mm Copper Armoured

3CX2.5 Sq.mm Copper Armoured

Supply and Making end Termination with Double Brass Compression Gland 26 and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required 4C X 25 Sq.mm

12 CX 2.5 5q.mm Copper Armoured

4CX 2.5 5q.mm Copper Armoured

3 CX 2.5 Sq.mm Copper Armoured

Providing and fixing Weather Proof MS cabinet (to enclose above Draw-out/Fire brigade Inlet connections) fabricated from 16g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx. 0.6 m x 0.6 m x 0.45 m).

Supplying, fixing, testing and commissioning of Dismantling Joint of PN 1.6 rating of Ductile Iron ISI marked complete with nuts, bolts, washers, 32 gaskets of size 100mm.

Supply, installation, testing and commissioning of Rubber Expansion Joint, Rubber Bellows (Flexible coupling) with required flanges, nuts, bolts & 33 accessories of Size 100 mm

Providing and fixing 25 mm dia gun metal fitting for water level Indicator gauge with isolation valve at top and bottom, heavy guage transparent polythylene tube of approx. 2 m length with colour Indicator float clamped to teak board 100 mm wide x20 mm with graduation in KL

Providing and fixing liquld level controller for fire pump to cut off in case low level of water in tank including cables, pannel,etc. and making 1 35 necessary connection to panel and commissioning.

Supply and fixing of illuminated Fire exit signages. This sign may be used to Indicate all exits which can be used in the event of an emergency. It shall be accompanied by an arrow as per IS-12349(1988) standards

Earthing with G.1. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with 37 charcoal/coke and salt as required.

Supplying and laying 25 mm X 5 mm G.l strip at 0.50 metre below ground as strip earth electrode, Including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring 38 washer spaced at 50mm)

Supplying and Fixing of Rockwool Insulation of 75 mm thickness minimum 50-70kg/m3 density with thermal conductivity of min K=0.04 W/mk at Minus 25 degree Celsius. Fire classification with test procedures to-BS 476: 39 Parts 6 & 7.

Providing and fixing of 24 gauge Aluminum/P.G. I sheet for the cladding of piping's/fittings. The boxes should be made in such a way that they can be wrapped over the existing insulated piping's/fittings of varying diameters. The boxes should be made in segments with provisions of joining/jointing along with openable vents at desired spots of ball valve, angle valve, sockets etc. The Job includes necessary supports by material/strips, all leads and lifts wherever needed

Providing, Installation,Testing and Commissioning of Gun Metal Ball Valves with brass body chrome plated of following sizes as required.25mm dia

Supplying, installation, testing & commissioning of repeater panel wih 320 character/Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required as required

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Please Enable Macros to View BoQ information