SPECIAL REPAIR TO REPLACEMENTS OF ROOF ASBESTOS CEMENT SHEET WITH GALVALUME SHEET OF BLDG J 91 AND F 91 AT ALLENBY LINES PROVN OF VITRIFIED IN CORRIDOR ADDITION ALTN OF TOILET FITTING AND ALLIED WORKS BLDG NO P 509 SP BLOCK BLDG NO 512 LIBRARY

Amount

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs, any thickness including cover fillets complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius in half brick thick wall built in CM 1:6 complete all as specified and as directed.

M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed.

S & F E-Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlins / truss etc complete (Main runner, cross tee, wall angle of MS galvanized with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fiber cement building board fixed to frames etc complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges fixed with self tapping screws complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:4 with water proofing compound over 10mm thick in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured and paid separately at supply only rates

Supply only water proofing compound of ISI marked complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for work complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and as directed .

Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc complete including removal of demolished material to a distance complete all as specified and as directed.

M&L Complete removal of existing treatment on walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface and complete all as specified and as directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M & L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion on walls over 3mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new/old steel surfaces of any description not other wise described over 10 cm width & girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F Joist, channel, angle, or tee sections, fixed independently as in rafter and purlins, without connection plates, etc. ( cut to ordinary lengths i.e. within 20mm of the length indicated) to Fe-290-(Gde E- 165) complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed

M&L formwork to sides & soffits of floor beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sub- ports, overhangs,etc also splays between cloors and beams etc complete all as specified and as directed.

M&L Reinforced cement concrete nominal mix type B1 1:2:4 (using 20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

S&F TMT bars above 10 mm dia & over cut out length bent to shape including cranking, bending and binding with 0.9 mm dia mild steel wire or securing with clip complete all as specified and as directed.

S&F TMT bars 5 mm dia and over up to and including 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9 mm dia mild steel wire or securing with clip for stirrups complete all as specified and as directed.

Dismantling floor hearth, or wall tiling including cement mortar bedding ( but not backing), removing rubbish off the premises complete all as specified and as directed.

M&L for double charged vitrified ceramic tiles of any approved shade 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over a screed bed 15mm thick in CM 1:4 (including), complete all as specified and as directed.

All as per item no 28 above but on vertical surfaces over a backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer using chalk whiting etc complete all as specified and as directed.

S&F for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed in short length to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut measured) 15 mm pipe complete all as specified and as directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 15 mm pipe complete all as specified and directed.

S&F in repair vitreous china counter top WHB white size 560x455mm or required size as approved & complete all as specified and as directed. Make: JAQUAR/ Hindware/ Parryware/CERA as approved.

S&F in repairs15mm size pillar tap fancy type long shank chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make: JAQUAR/ Hindware/ Parryware/CERA as approved.

S&F in repair SS waste coupling 32mm dia complete all as specified & as directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair etc complete all as specified and as directed.

S&F CP health faucet with 1.2 mtr tube and hook complete all as specified and directed. Make: JAQUAR/ Hindware/ Parryware/CERA as approved.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm & PVC LDPE waste pipe 32mm dia 1m length complete all as specified and as directed

S&F in repairs15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and directed

S&F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make: JAQUAR/ Hindware/ Parryware/CERA as approved.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and as directed

S&F Aluminum extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type with flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces complete all as specified and as directed. Make: JAQUAR/ Hindware/ Parryware/CERA as approved.

S&F Aluminum, anodized, barrel tower bolts 150mm long of extruded section complete all as specified and as directed.

S&F Aluminum handles 150mm size, cast type, anodized complete all as specified and as directed.

S&F Aluminum alloy, anodized, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed

S&F Butt hinges of 125 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and as directed

S&F PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified and as directed.

Taking down Wall paneling and similar work like Aluminum wall partition including glazing etc complete all as specified and as directed.

S&F fixed type ventilators aluminum powder coated of frame size 50.80X 25.40mm,1.5mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminum beading ,aluminum grill with fixing arrangement (wt of grill not less then 2.50 kg/sqm), aluminum wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and as directed.

M&L for preparation of old wall surfaces & applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of new wall surfaces & applying two coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old ceiling surfaces & applying one coat of distemper oil emulsion complete all as specified and as directed.

S&F Brass CP bottle traps 32mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and as directed.

M&L Granite (of any type) tiles 20mm thick machine cut, as WHB counter top bedded over brick pillar and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings for WHB , cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

S&F for Mild steel TMT bars 6 to 8mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exceeding 1.5 sqm each etc including making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exceeding 1.5 but not exceeding 4 Sqm each etc making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and as directed.

S&F pressed steel frames 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube , in opening as per specifications & drawings complete all as specified and as directed.

S&F Factory made PVC solid door shutter 28 to 30mm thick (styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm Plain colour PVC sheet on back face with particle board Core supplying and fixing in frame at site as per specification and complete all as specified and as directed.

S&F Flush shutters of 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, if one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F Mortice lock, vertical type, size 100 mm of two levers Brass body complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for M.S Hold fasts of FI required size complete all as specified and directed.

M&L for Vitrified Ceramic tiles any shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 complete all as specified and as directed.

M&L for Vitrified Ceramic tiles any shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) in wall complete all as specified and as directed.

M&L for preparation of newly plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3mm thick wall care putty in two layer complete all as specified and as directed.

S&F 12mm thickness toughened glass as in wall partition & door with required hinges,SS 304 grade handles,door/floor spring etc and including all necessary fittings complete all as specified and as directed.

M & L for treating the marble surface with beeswax polish complete all as specified and as directed.

M & L for Preparing old steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed.

S&F urinal partitions slabs terminating about 40cm above floor line, taking down & refixing complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface and complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

Dismantling stone slabs and tiles of any description or thickness and similar work laid, bedded and pointed in cement mortar complete all as specified and directed.

M & L for machine pressed precast concrete interlocking coloured paver block rubber molded & vibro compacted any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with Grey cement and pigment laid over 30mm thick sand cushioning complete all as per specified

M&L for double charged vitrified ceramic tiles of any approved shade 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over a screed bed 15mm thick in CM 1:4 (including) complete all as specified and as directed.

All as per item no 86 above but on vertical surfaces over a backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

E/M ITEMS: Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring on concealed conduit with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through conduit and including rigid 20 MM PVC conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc complete all as specified and as directed for the following:- (a) One light/fan point controlled by one, one way switch 5A, SP

(b) All as per item No 90 but one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

(c) All as per item No 90 but one 3 Pin 5 Amps switch socket Independent board

Description all as per item No 90 here-in-before but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts complete all as specified and as directed.

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and as directed.

S & F Modular Socket, 6A - 2/3 combined 2 module of capacity 230 volts complete all as specified and as directed.

S & F Modular Socket outlet multipurpose 3 pin 15 Amp and one pin 5 Amp

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

S and F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified of IndoAsian cat part No 811122-29 or equivalent in Legrand, Havells complete all as specified and as directed.

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps including taking sown existing old unserviceable MCB complete all as specified of IndoAsian cat part No 811152 or equivalent in Legrand, Havells complete all as specified and as directed.

S & F in replacement Recess mounting indirect with perforated sheet & electronic DRIVER luminaries 36 watts LED soft line new with central opal diffuser series including all accessories and Lamp, . all as specified and as directed . Note: Cutting of False ceiling and removal of old fitting and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required. Cost of False ceiling work is inclusive of rate quoted complete all as specified and as directed. Make :HALONIX Model No HLFPU22-02-36-CW or Havells Model Endura Slim Pro plus 2x2 PLR 36 W LED 857 MOD OR C&S Model No CYGNUS Series of Cat No LTCRSLM36WATT2'X2'

S & F in replacement of wall mounted LED batten of 10 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver and connecting to all accessories from ceiling rose to fitting complete all as specified and directed by Engg-in-Charge. Make: HALONIX Model HLB-03-10-CW-AL or Havells Model LUMILINEPLUSBS10WLED865SPCSS or Wipro Cat No. LL20-111-XXX-65NE3

S & F in replacement of wall mounted batten type LED light with co extruded polycarbonate body suitable for 20w LED lamp along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make: HALONIX Model HLB-33-20-CW-IP OR Havells Cat part No LUMILINE BS20WLED865SPCWH or WIPRO Cat part No LL20-221-XXX-65NE3

M & L for Submain wiring with two single core 4Sqmm PVC insulated copper conductor multistranded FRLS 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 4Sqmm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Make: Bajaj/Havells/Usha

Supply and Fixing Metal body Exhaust fan of 300mm sweep of 1400 RPM heavy duty single phase 50 HZ AC Supply with louvers and connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified and as directed. Make: Bajaj Maxima or equivalent model in Havells/Almonard

S & F in replacement of Horizontal type TPN DB 4 way double door made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accommodated suitably in a MS enclosure weather proof made out of 3 mm thick MS sheet having hinged and robust locking arrangement including painting by red-oxide one coat and powder coated complete all as specified and as directed. Make : Havells - CAT Part No DHDNTHODAW04, Standard Cat No - DSDNTSODAW04, C&S Cat No - CSDBTPNPDD04.

S & F in replacement of MCB TPN, 415 volts suitable for fixing on MCB DB of capacity 63 Amps complete all as specified and as directed. Make - Havells Cat No - DHMZCTNF063, Standard Cat No - DSMGCTNF063, C&S Cat No - CSMBS3C63N.

S & F in replacement Fancy type lights (Round Type) of 20/22 watts including LED lamp complete with all accessories complete all as specified and as directed. Make: Halonix Model HLDLS-R06-22-CW or Wipro Model No:D732065 or C&S CANOPUS-CS-SERIES OF Cat part No LTCRSUR22LEDRND/W

Supply and fixing refrigerator, electric driven (single phase), capacity 374 Ltrs or higher upto 380 ltrs complete all as specified and as directed. Make: Model GC-B459NVFF of LG or equivalent make in Voltas/Samsung

Supply and fixing refrigerator, electric driven (single phase), capacity 335 Ltrs or higher upto 350 ltrs complete all as specified and as directed. Make: Model GC-B369NLRF of LG or equivalent make in Voltas/Samsung

Supply, Installation, commissioning of Metal Top Deep Freezer, double door single phase 240 50 Hz of capacity 200 Ltrs complete all as specified and as directed. Make: CHFDD200 of Bluestar or equivalent make in Voltas/Rockwell

Supply, Installation, commissioning of Metal Top Deep Freezer double door single phase 240 50 Hz of capacity 300 Ltrs complete all as specified and as directed. Make: CHFDD300 of Bluestar or equivalent make in Voltas/Rockwell

Supply installation, commissioning of Ice making machine of 90 Ltrs, self standing made out of stainless steel body air cooled with eco friendly refrigerant working on single phase power supply 43kg/24hrs rated capacity and 25 kg ice storage bin complete all as specified and as directed. Make: SL90AG of Blue star or equivalent make in Voltas/LG.

S & F Modular Single pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one single pole MCB 16 Amps (AC Box) complete all as specified and as directed. Make : Havells - CAT Part No DHDMCSN0251025, Standard Cat No - DSDMCSN0251025, C&S Cat No - CSDBMACBOX025

Supply & fix medium grade galvanised tube of size 15 mm dia/bore with all fittings and fixed complete to walls and ceilings and laid in floor complete all as specified and as directed.

ATUL ENTERPRISES

SAMBASIVA RAO

LAKSHMI ENGINEERS

sandhya enterprises

VENKATA PRABHAVATHI CONSTRUCTIONS

M/s Bhavani Constructions