DEPOSIT FOR SHIFTING HT-LT LINES and CABLES AND TFR FROM KAUSTHUBHAM TO GOKULAM VANAMALA IN FAVOUR OF GVR DEVASWOM ON TURNKEY BASIS under Electrical Section Guruvayur

Anchoring /Dead end Clamp Assembly for HT AB Cables up to 150 sq.mm

Suspension Clamp Assembly for HT AB Cables up to 120 sq.mm

Anchor / Dead End Clamp for AB Cables 70 sq.mm

Suspension Clamp for AB Cables 70 sq.mm

Stainless Steel Strap [20 mm x 0.7 mm]

Stainless steel Buckles [20.5 mm x 1.5 mm; thickness 1.2 mm]

Post mounting Distribution box for effecting LT service connection

MVT Kit For HT ABC

Three phase Straight Joint kit for HT ABC 120 sq.mm

Satellite connector – Main : 16 sq mm to 95 sq mm; Tap : 1.5 sq mm to 35 sq mm (4 way)

Insulation Piercing Satellite connector – Main : 16 sq mm to 95 sq mm; Tap : 4 sq mm to 35 sq mm (4 way)

Aerial Bunched Cable HT 3x120 + 1x95 sq.mm (Insulated Messenger)

Aerial Bunched Cable LT 3x70 + 1x50 + 1x16 sq.mm (Insulated Messenger)

Cable Tie UV Plastic Heavy Duty 250 mm Length

Straight Through Joint for LT ABC 70 sq.mm

Termination Kit (3 Nos)for HT ABC 120 Sq.mm

Description of Work / Item(s)

LABOUR DETAILS

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one HT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Dismantling (without damage) one HT stay incl. back filling, and bringing back to section store.

Dismantling one V cross arm/Channel cross arm from existing Pole, and bringing back to section store.

Dismantling one Channel cross arm from existing DP structure, and bringing back to section store.

Dismantling (without damage) one AB switch from existing structure and bringing back to section store.

Dismantling one HT pin insulator with pin and bring back to section store.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Erecting one 160kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting one set AB switch and giving connection

Conveyance of one km 11kV line materials from section store/stacking place to the work site (excluding poles).

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 2.4m/3m Channel cross arm (75x40x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Dismantling one damaged LT TW/RSJ/Rail pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling one LT 2 line cross arm from existing pole.

Dismantling one LT 4 line cross arm from existing pole.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Dismantling one section fuse

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Providing Stay for LT poles incl. digging & back filling pit.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Dismantling one Transformer upto 160kVA from structure and loading to vehicle incl. disconnecting HT/LT/Earth connections.

Constructing Transformer plinth inclusive of cost of all materials (as per specification).

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Erection of suspension clamp for 11KV ABC of any size

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap : 4-35 sqmm

Installation of Pre-insulated straight through joints for 70sqmm cable

Fitting of one No. pole top service connection box of standard size (up to 4 way) using ss strap/B&N of suitable size in to the PSC/A poles at the standard height excluding giving connections

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Singe Phase Satellite connectors upto 4 service main connections (25-95 ABC/2.5-25 sqmm SM wire-2No)

Dismantling one Anchor clamp /dead end clamp from 11 KV ABC

Dismantling one suspension clamp from 11 KV ABC

Dismantling of suspension clamp suitable for LT AB cable

Dismantling of Anchor clamp / dead end clamp for LT AB cable

Dismantling of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16 (Street Light) + 1 x 50 Sq.mm. (Insulated Messenger)

Dismantling one set (3No.) 11kV LA

Dismantling one set (3No.) 11kV DO FUSE

Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm

Doing straight joint on cables of sizes upto and incl. 3x185 sqmm using the cable jointing kit supplied departmentally as per specification.

Dismantling Transformer plinth

Providing Cable Tie

Dismantling of 11 kV Aerial bunched cable XLPE insulated of size 3 x 120+ 1 x 95 sqmm with bare insulated Messenger

Description of Work / Item(s)

Total Amount including GST of BoQ1 (Plant and Equipment)

Total Amount including GST of BoQ2 (Installation /Erection charges)

Total Amount including GST of BoQ1 + BoQ2

Unconditional Discount Offered by the Bidder (if any) in Rs

Grand TOTAL including GST(Sl.No.3-Sl.No.4)

PK ELECTRICAL ENGINEERING

Thomas v a

ITHAL ENGINEERING GROUPS

Thomas v a

PK ELECTRICAL ENGINEERING

Thomas v a