Providing Fire Fighting system for Shri K. J. Polytechnic, Bharuch Dist. Bharuch.

Name of Work :- Providing Fire Fighting system for Shri K. J. Polytechnic,

Bharuch Dist. Bharuch.

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Amount

1 Supplying, installation, testing and commissioning of diesel engine driven main 1.00 No. 606551.46

fire pump suitable for automatic operation and consisting of following, complete

in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage,

centrifugal pump of cast of iron body and bronze impeller with stainless steel

shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water

cooled with radiator, diesel engine conforming to relevant IS standard complete

with auto starting mechanism, 12 /24 volts electric starting equipment, diesel

tank, exhaust pipe extended upto 10 m outside pump house duly insulated with

50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential

silencer, instruments and protection as per standard specification, stop

solenoid for auto stop in the event of fault with audio indications, painted with

post office red colour etc. as required. M.S fabricated, common base plate,

coupling, coupling guard, foundation bolts etc. as required. Suitable cement

concrete foundation duly plastered and with anti vibration pads.

2.7 2850 lpm at 88 m Head

2 Supply, installation, testing & commissioning of Priming tank, HDPE type, 1000 14.00 No. 53530.00

litres, with necessary piping 100 mm size, G.I. pipe for priming the pumps, pipe

of with butterfly valves for isolation, Water filling to priming tank by piping min.

50 mm size, with all complete.

3 Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe 50.00 Mtr 658.43

conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees,

flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required: 25 mm dia.

4 Supply, fabrication & erection of above ground G.I. 'C'-Class, ERW piping 400.00 Mtr 1135.15

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.

hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specification and direction of the

Engineer-in-charge, with all complete. 50 mm dia.

5 Supply, fabrication & erection of above ground G.I. 'C'-Class, ERW piping, 150.00 Mtr 1668.91

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.

hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specification and direction of the

Engineer-in-charge, with all complete. 80 mm dia.

6 Supply, fabrication & erection of above ground G.I. 'C'-Class, ERW piping, 150.00 Mtr 2262.88

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.

hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specification and direction of the

Engineer-in-charge, with all complete. 100 mm dia.

It. Description of Item Qty. Unit Rate in Amount

7 Supply, fabrication & erection of above ground G.I. 'C'-Class, ERW piping, 90.00 Mtr 3165.15

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up

etc. painting for piping, fittings & structural pipe support, shall be two coat of

zinc primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with

all accessories as per approved drawings, specification and direction of the

Engineer-in-charge, with all complete. 150 mm dia.

8 Supply, fabrication & erection of above ground G.I. 'C'-Class, ERW piping, 15.00 Mtr 4924.34

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.

hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specification and direction of the

Engineer-in-charge, with all complete. 200 mm dia.

9 Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe 30.00 Mtr 4924.34

conforming to IS 1239/3589 including fittings like elbows, tees, flanges, tapers,

nut bolts, gaskets etc. in ground including welding, excavation & providing

cement concrete blocks as supports, anticorrosive treatment with

coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes

complete as required. 200 mm dia.

10 Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe 30.00 Mtr 3368.39

conforming to IS 1239/3589 including fittings like elbows, tees, flanges, tapers,

nut bolts, gaskets etc. in ground including welding, excavation & providing

cement concrete blocks as supports, anticorrosive treatment with

coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes

complete as required. 150 mm dia.

11 Design, Supply and installation of Safety Signage made of Zinc Sulphilde 14400.00 Sq. 9.09

based glow in dark, Rigid sheet with High Luminous property enclosed in a inch

transparent weather proof UV stabilized plastic pasted on 3 mm thick clear

acrylic sheet such as EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING

FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE ALARM CALL

POINT, FIRE HOSE REEL, FIRE HYDRANT POINT etc.

12 Providing & fixing of pressure switch in M.S. pipe line including connection etc. 12.00 No. 1369.03

13 Supply, Installation, Testing and Commissioning of 150 mm dia. Pressure 24.00 No. 2777.50

gauge (for all pipes) of range 0 - 15 Kg / cm² conforming to IS - 3624 having

bourdon tube of stainless steel 310 in cast aluminium, stove enameled, black,

weather proof case with outer, screwed aluminium bezel and complete with

necessary U-type stainless steel siphon tube and cock including providing

suitably painted angle iron support to the tube etc. as per required.

14 Supplying, fixing, testing & commissioning of double flanged sluice valve of 2.00 No. 6381.92

rating PN 1.6 with non rising spindle, bronze / gun metal seat, ISI marked

complete with nuts, bolts, washers, gaskets and conforming to IS 780 of

following sizes as required. 50mm

15 Supplying, fixing, testing & commissioning of double flanged sluice valve of 2.00 No. 9471.70

rating PN 1.6 with non rising spindle, bronze / gun metal seat, ISI marked

complete with nuts, bolts, washers, gaskets and conforming to IS 780 of

following sizes as required. 80mm

16 Supplying, fixing, testing & commissioning of double flanged sluice valve of 3.00 No. 12965.41

rating PN 1.6 with non rising spindle, bronze / gun metal seat, ISI marked

complete with nuts, bolts, washers, gaskets and conforming to IS 780 of

following sizes as required. 100mm

It. Description of Item Qty. Unit Rate in Amount

17 Supplying, fixing, testing & commissioning of double flanged sluice valve of 2.00 No. 20157.12

rating PN 1.6 with non rising spindle, bronze / gun metal seat, ISI marked

complete with nuts, bolts, washers, gaskets and conforming to IS 780 of

following sizes as required. 150mm

18 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 30.00 No. 3350.59

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below lever

operated and above 150 mm dia. gear operated complete with mating flanges /

ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick etc.

with all complete. 50 mm dia.

19 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 10.00 No. 4412.14

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below lever

operated and above 150 mm dia. gear operated complete with mating flanges /

ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick etc.

with all complete. 80 mm dia.

20 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 20.00 No. 5904.43

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below lever

operated and above 150 mm dia. gear operated complete with mating flanges /

ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick etc.

with all complete. 100 mm dia.

21 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 2.00 No. 7934.90

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below lever

operated and above 150 mm dia. gear operated complete with mating flanges /

ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick etc.

with all complete. 150 mm dia.

22 Supply, installation, testing & commissioning of Cast iron body Dual Plate 20.00 No. 3348.08

Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #

150 with bolts & nuts, washers, gaskets 3 mm thick, etc. with all complete

accessories. 50mm dia.

23 Supply, installation, testing & commissioning of Cast iron body Dual Plate 4.00 No. 3782.90

Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #

150 with bolts & nuts, washers, gaskets 3 mm thick, etc. with all complete

accessories. 80mm dia.

24 Supply, installation, testing & commissioning of Cast iron body Dual Plate 12.00 No. 5455.27

Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #

150 with bolts & nuts, washers, gaskets 3 mm thick, etc. with all complete

accessories. 100mm dia.

25 Supply, installation, testing & commissioning of Cast iron body Dual Plate 2.00 No. 8154.89

Wafer Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #

150 with bolts & nuts, washers, gaskets 3 mm thick, etc. with all complete

accessories. 150mm dia.

26 Supply, installation, testing & commissioning of SG iron body Single Plate 10.00 No. 5127.87

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc. with all

complete accessories. 50mm dia.

27 Supply, installation, testing & commissioning of SG iron body Single Plate 2.00 No. 6811.18

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc. with all

complete accessories. 80mm dia.

28 Supply, installation, testing & commissioning of SG iron body Single Plate 10.00 No. 9785.64

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc. with all

complete accessories. 100mm dia.

29 Supply, installation, testing & commissioning of Y Type Strainer complete with 10.00 No. 4170.69

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 80mm dia.

30 Supply, installation, testing & commissioning of Y Type Strainer complete with 10.00 No. 5901.57

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 100mm dia.

It. Description of Item Qty. Unit Rate in Amount

31 Supply, installation, testing & commissioning of Y Type Strainer complete with 2.00 No. 9868.42

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 150mm dia.

32 Supply, installing, testing and commissioning of Normax make C.I. heavy duty 14.00 No. 12625.00

ball type foot valve with flanges, nut bolts, gaskets etc. with necessary

complete accessories. 80mm dia.

33 Supply, installation, testing & commissioning of fire brigade Inlet connection of 1.00 No. 12375.46

cast iron body with gun metal male instantaneous inlet coupling complete with

cap and chain as required for suitable dia. MS pipe conforming to IS 904 as

required. 4 way -150 mm dia. M.S. pipe.

34 Supply, installation, testing & commissioning of fire brigade Inlet connection of 10.00 No. 5970.25

cast iron body with gun metal male instantaneous inlet coupling complete with

cap and chain as required for suitable dia. MS pipe conforming to IS 904 as

required. 2 way -100 mm dia. M.S. pipe.

35 Supplying FIRE bucket round bottom of 9 liters capacity made out of 24 gauge 40.00 No. 1025.15

G.I Sheet with extra handle at bottom duly painted white inside and Red out

side with FIRE mark. Filled with dry-sand and kept on existing stand provided

or hung on wall hook.

36 Supplying and erecting floor mounting Stand for keeping four nos. of FIRE 10.00 No. 5807.50

buckets comprising 1500 mm in length, 900 mm height frame made out of

30mm x 30 mm x 4 mm angle iron with cross supports legs, welded with

hooks and duly painted with one coat of primer and two coats of approved

enamel P O red paint.

37 Providing and fixing approved make Perforated C type cable tray. Made from 100.00 Mtr 687.71

pre- galvanized sheet steel. The cable tray should be bended as per IS

2062/1079 with max 17.5% perforation with coupler plate / fish plate and GI

hardware like nut - bolt and washers etc. erected on existing support as per

specification and as per instruction of engineer in charge. (5) 300 x 50 x

38 Providing and fixing approved make Perforated C type cable tray. Made from 100.00 Mtr 534.70

pre- galvanized sheet steel. The cable tray should be bended as per IS

2062/1079 with max 17.5% perforation with coupler plate / fish plate and GI

hardware like nut - bolt and washers etc. erected on existing support as per

specification and as per instruction of engineer in charge. (3) 150 x 50 x

39 Supply, installation, testing & commissioning of Oblique pattern type stainless 40.00 No. 6771.48

steel (SS 304) single headed external Fire Hydrant Valve with 63 mm dia.

female instantaneous outlet conf. to IS: 5290, type - A, WITH BLANK GUN

METAL/STAINLESS STEEL CAP AND CHAIN REQUIRED SINGLE HEADED

40 Supply, installation, testing and commissioning of fabricated from 3 mm CRC 40.00 No. 2443.19

sheet, hose box of size - 750 mm x 600 mm x 250 mm - painted with Fire Red

as per IS: 5, shade no. 536 color from outside and white enamel from inside,

front 3 mm thick transparent glass with key, handle and brass hinges - to

accommodate 2 nos. of 15 mtr long hose and 1 no. universal branch pipe,

including supporting arrangement with civil work.

41 Supplying and fixing 63mm dia.,15 m long RRL hose pipe with 63mm dia male 40.00 No. 4606.41

and female couplings duly bound with GI wire, rivets etc. conforming to IS

(type-A) as required : Gun metal.

42 Supply, Installation, Testing and Commissioning of Weather proof Standard 40.00 No. 3535.00

Fire Hose Cabinet wall mounting type (750 mm x 600 mm x 250 mm deep)

having single or double opening with necessary locking arrangement by allan

key suitable for housing 2 nos. hose pipe, 1 no. branch pipe & nozzle spanner.

43 Supply, Installation, testing and commissioning of first aid hose reel with MS 45.00 No. 7683.69

construction spray painted post office red, conforming to IS : 884. complete

with following as required. 20mm nominal internal dia water hose thermo

plastic (texttile rain forced) type -2 a per 12585. 20mm nominal internal dia gun

metal glove valve & nozzle.

Drum and bracket for fixing equipments on the wall connection from riser with

25 mm dia. stop gun metal valve & M.S. pipe and socket. 30 MTR.

It. Description of Item Qty. Unit Rate in Amount

44 Supplying, fixing & testing of C.I. ball valve 25mm dia. (Thread). 80.00 No. 1212.00

45 Supply of 12 V Battery, Coolant, Engine Oil, oil filter, diesel filter, Diesel and 1.00 No. 29795.00

46 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 50.00 Cum 117.08

of useful materials and disposing the excavated stuff for all lead and lift for all

47 Supplying, Installing, Testing & Commissioning of M.S. structural steel support. 502.22 Kg. 90.90

48 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV 100.00 Mtr 1245.33

grade to be erected as directed of following size. (E) 3 core 2.5 Sq. mm for

pressure switch.

49 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 200.00 Mtr 287.85

copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (B) 3 core 4 Sq. mm.

50 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 200.00 Mtr 499.95

copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (D) 3 core 10 Sq. mm (Only Fire Panel to Fire Pump)

51 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 50.00 Mtr 215.13

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable for

Diesel Engine Battery Charger (A) 3 core 2.5 Sq.mm

52 Supply, installation, testing and commissioning of ABC type 6 kg confirm to 50.00 No. 2626.00

IS:15683, with ISI marked / TAC approved fitted with required accessories

including wall suspension brackets.

53 Supply, installation, testing and commissioning of Carbon Dioxide (CO2) type 50.00 No. 9595.00

Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC

approved fitted with required accessories including wall suspension brackets.

54 Supply, installation, testing and commissioning of Modular ABC type 5 kg 10.00 No. 2525.00

confirm to IS:15683, with ISI marked / TAC approved fitted with required

accessories including wall suspension brackets.

55 Submitting the application to obtain Fire Plan Approval and After completion of 10.00 No. 101000.00

work obtain Final Fire NOC for 3 Year.

56 Supply, Installation, Testing and Commissioning of Gun Metal Air Release 12.00 No. 2373.50

Valve with necessary fittings. Size: 25 mm

57 Supplying, installation, testing & commissioning sector panel suitable for 9.00 No. 7851.74

following zones, complete with visual indications for short circuit fault, open

circuit fault, fire condition and all other standard facilities as per IS:2189 with

mimic diagram for all area / zone covered, complete with all connections,

interconnections as required. 4 zone, with complete accessories.

58 SITC of Intelligent Analog Addressable Type Photoelectric Type above Ceiling 50.00 No. 4242.00

Smoke Detector complete with Respond Indicator Dual LED, Hard Addressable

Having rotary decade Address switches from 01-99, complete with Mounting

base and required mounting accessories complete as required conforming to

BS 5839 Standards and duly approved by EN54/LPCB.

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

59 FIRE DETECTION SYSTEMS, Supply, installation, testing and commissioning 50.00 No. 3832.95

of below False Ceilling Addressable ideal optical smoke detector for detecting

visible smoke particles with Mounting base Item as per drawing and

specifications, as approved by electrical engineer incharge.

60 SITC of Addressable Type Loop Powered Hooter Cum Strobe with 32 tone 40.00 No. 12685.60

selection, volume setting features, IP24 housing, Wide operating voltage

range, complete with Mounting base with required mounting accessories as

required conforming to BS5839 standards and duly approved by EN54/LPCB

Make : BOSCH / HONEYWELL / SYSTEM SENSOR / ASES

It. Description of Item Qty. Unit Rate in Amount

61 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 2300.00 Mtr 178.77

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A) 2 core 2.5 Sq. mm for Fire

62 Providing Core Cutting for beam & Slab up to 25 mm to 100 mm dia. directed 130.00 No. 858.50

by engineer in-charge.

63 (A) Supplying, installation, testing and commissioning of Electric driven Main 1.00 Set 358508.13

Fire Pump suitable for automatic operation and consisting of following,

complete in all respects, as required :

(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body

& bronze impeller with stainless steel shaft, mechanical seal conforming to

(C) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed

RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP

protection for enclosure, horizontal foot mounted type with Class - 'F' insulation,

conforming to IS-325.

(D) M.S. fabricated common base plate, coupling, coupling guard, foundation

bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered with anti vibration pads.

2850 LPM, 70 MTR HEAD

64 (A) Supplying, installation, testing and commissioning of electric driven 10.00 No. 91483.46

pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

(B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze

impeller with stainless steel shaft, mechanical seal conforming to IS:1520.

(C) Suitable HP squirell cage induction motor TEFC type suitable for operation

on 415 volts, 3 phase 50 Hz AC supply with IP55 class of protection for

enclosure, horizontal foot mounted type with Class - 'F' insulation, conforming

(D) M.S. fabricated Common base plate, coupling, coupling guard, foundation

bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and with anti vibration

180 LPM, 70 MTR HEAD (180 lpm to 70m Head)

65 Supply, Installation and commissioning of manual call boxes of M.S. 10.00 No. 420.18

construction in surface / recess with stainless steel chain & hammer assembly

complete with glass and push button etc.

66 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and Final 7500.00 Sq.m. 15.15

67 Excavation for foundation in sand, gravel, clay soft soils and murrum etc. 258.90 Cum 486.77

including shoring, strutting dewatering as necessary and disposing of the

excavated stuff as directed. (A) Depth upto 3.0 M. and lead upto 100m for

68 Supplying, spreading and consolidate with crushed metal of 40 mm to 63 mm 67.00 Cum 650.44

in trench including filling measure boxes etc. complete.

69 Providing and filling in foundation with ordinary cement concrete M-100 mix and 34.00 Cum 3105.11

providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

70 Providing and laying controlled cement concrete M-250 and curing complete 30.00 Cum 4070.58

excluding the cost of formwork and reinforcement for reinforced concrete work

in (A) Foundations, footings, base of columns and mass concrete.

71 Providing and laying controlled cement concrete M-250 and curing complete 54.30 Cum 4355.25

excluding the cost of formwork and reinforcement for reinforced concrete work

in (B) Walls, from top of foundation level upto floor two level.

72 Providing I.S.I. Mark T.M.T. bar Fe-500D bar reinforcement for R.C.C. work 5553.60 Kg. 76.21

including bending, binding and placing in position complete upto floor two level.

73 Providing formwork of ordinary timber planking so as to give a rough finish 27.60 Sq.m. 174.98

including centering shuttering strutting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete work in (A)

Foundations Footings bases of columns etc. and Mass concrete.

It. Description of Item Qty. Unit Rate in Amount

74 Providing formwork of ordinary timber planking so as to give a rough finish 267.60 Sq.m. 232.25

including centering shuttering strutting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete work in (C) Vertical

surface such as walls (any thickness) partitions and the like including attached

buttresses & string course & the like.

75 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 74.10 Cum 130.39

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

76 Providing and fixing precast rubber dye / steel dye inter locking concrete block 153.00 Sq.m. 685.42

60mm thick with grade of concrete M-300 pneumatic compressed / vibrated

mechanically and as per approved design confirming to IS 15658 :

including 35 mm sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. complete.

77 Providing and fixing precast concrete half batten kerb stone of gray cement 180.00 Rmt. 1080.70

based concrete block 60cm length, 30cm height and 15cm thick including

dropper and radius kerb with hole when necessary of M-200 grade concrete as

per approved design and including excavation for fixing in proper line and level,

filling the joint with C:M. 1:3 (1 cement : 3 fine sand) etc. complete as per

engineer-in-charge.

i.e. Rs. One Crore Twenty lacs Seventy Five thousand Seven hundred Ten and Eighty Seven paisa only.

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a

change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

City (R & B) Sub Division, Bharuch (R & B) Division, Bharuch (R & B) Division,

Bharuch Bharuch Bharuch