E-Tender for the work of Construction of new fault centre or Indoor S/S in Nava Japa area under Mahuva division office.

Name Of Work:Construction of new fault centre or Indoor S/S in Nava Japa area under Mahuva

division office.

PARTCULARS OF ITEM QUANTITY RATE PER AMOUNT

Excavation for foundation upto 1.5 m depth including sorting out

1 and stacking of useful materials and disposing off the 15.00 210.42 Cmt

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out

2 and stacking of useful materials and disposing off the 15.00 269.87 Cmt

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth including sorting out

3 and stacking of useful materials and disposing off the 15.00 460.53 Cmt

excavated stuff upto 50 Meter lead. © Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (D) Soft

rock not requiring Blasting

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (E) Hard

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- hand broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

P/L controlled cement concrete M 250 and curing complete

including the cost of form work and excluding reinforcement for

reinforced complete work in(A)- foundation footings, Base of

Columns and mass concrete

Providing and laying controlled cement concrete M.250 and

curing complete including the cost of formwork but excluding

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level.

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each disposited layer by ramming and

Filling in foundation and plinth with murrum or selected soil in

10 layers of 20cm. thickness including watering, ramming and 17.00 301.58 Cmt

consolidating etc. complete.

Providing and laying controlled cement concrete M.250 and

curing complete including the cost of formwork and excluding

11 the cost of reinforcement for reinforced concrete work in (C) 6.00 6939.00 Cmt

landing,shelves,Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing and laying controlled cement concrete M.250 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (C)

Slabs and Cantilever upto floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

13 including bending, binding and placing in position complete 2500.00 76.52 Kg

upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in

Superstructure in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation

and plinth (B) Conventional

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i)Cement mortar 1:3 (1-

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

Providing and laying coloured glazed tiles of the size 300 mm

21 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, 32.00 1508.58 Smt

of steps and dedo on 10 mm. thick cement plaster 1:3 (1

: 3 coarse sand) & jointed with white cement slurry.

Providing and fixing fully glazed/partly glazed Single door

shutter made, frame of 10.15cmX4.45cm aluminum section,

and Shutter-Top & vertical section of 8.5cmX4.45cm size and

bottom section of 11.40X4.45cm size, using 5mm thick

22 "TRIVENI" or HB4 plain glass glazing deep rubber gasket with 12.00 4080.00 Smt

locking arrangement, all fixtures & fastening of anodized

section with all labours & materials etc. complete as per

drawing & as directed by EIC Complete as per drawing and as

directed by E.I.C..

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 63.50 x 38.10 x

mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size

61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

23 0.659 Kg/mt with sliding shutters of horizontal member size 8.00 1696.73 Smt

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

@ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window.

Providing and fixing standared extruded of alluminium section

of size 63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with

colour Powder Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete for Ventilation

Providing and fixing M.S. grills of required pattern to wooden

25 frames of windows etc. with M.S. flats at required spacings and 180.00 107.68 Kg

frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

Providing and fixing 1.20 Metre high fencing with 2.0 Metre

long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting

coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two

26 diagonals of galvanised steel barbed wire weighting 9.38 Kg. 28.00 388.05 Rmt

per 100 Metre, strained and fixed to posts with G.I,staples

including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C1:5:10 etc complete.

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even

27 shade including thoroughly brushing the surface free from 100.00 40.19 Smt

mortar dropping and other foreign matter and sand papered

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

28 surface to give an even shade including throughly brushing 100.00 83.98 Smt

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Applying One coat of primer of approved brand and

29 manufacture on new wall surface to give an even shade 197.00 28.00 Smt

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

Finishing Wall with Weather Proof Exterior Emulsion Paint on

30 Wall Surface (Two Coats) to give an required shape even 197.00 120.93 Smt

shade after thoroguhly brushing the surface to remove all dirt,

and remains of loose powdered materials etc. complete

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

31 red lead paint. (A)In beams and joists, channels angles Tees, 500.00 90.1830 Kg

flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like

Providing erecting and fixing double coated ISI water tank of

32 required capacity each with all necessary fittings and 1000.00 3.91 liter

connection etc. complete on terrace

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

33 wall with the help of clamp at every two metre C/C or shall be 8.00 90.93 Rmt

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

34 wall with the help of clamp at every two metre C/C or shall be 8.00 71.93 Rmt

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

35 Providing and fixing screw down bib taps of following size.(C) 3.00 157.29 Nos.

Gun metal screw down bib tap. (i) 15mm dia.

Providing and fixing brass screw down stop tap.(A) 15mm

37 Providing and fixing Gun metal check or non-return 2.00 416.47 Nos.

fullway wheel valve.(C) 25mm dia.

P/F wash basin with single hole for pillar tap with providing and

fixung 15mmC.P. brass quarter turn pillar tap, capstan head

screw down high pressure with screws, shanks and back

38 nutswith C.I. or M.S. Brackets painted white paint including 1.00 2672.00 Nos.

cutting holes and making good the same including

C.P. brass waste and waste Pipes - vitreous china.-Flat back

washbasin 550 x 400 mm. Size - in colour.

Providing and fixing wash down closet (European W.C. Pan)

with integral "P" or "S" trap and including plastic seat and

cover with brass hinges and rubber buffersand PVC connector

39 , hand faucet with 15mm stop tap, self closing flush valve etc. 1.00 4830.00 Nos.

including jointing trap with soil pipe in C.M. 1:1 ( 1- Cement : 1-

Fine sand ) etc.connecting cistern with closet etc., comp.in

working condition-Vitreous in colour.

Providing and laying kotah stone slab 25 mm thick in riser of

steps, dedo and pillars laid on 10mm thock cement mortar

40 1:3(1- cement : 3coarse sand ) and jointed with grey cement 12.00 1124.24 Smt

Slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. completed, kotastone-

Providing and fixing in position collapsible steel shutters with

vertical channels 20 x 10 x 2 mm braced with flat iron

41 diagonals 20 x 5 mm size with top and bottom rails of T_rin 4.20 6200.22 Q

40x 40 x 6 mm with 38mm dia, steel pulleys complete with

bolts, nuts, locking arrangements, stoppers handles including

applying a priming coat of red lead paint.

Providing and fixing MS wire mesh(Chicken mash) at every joint

42 of masonary and concrete, or any joint includding all fixtures 21.00 216.00 Smt

and fittings as directed by EIC.

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as per

43 approved design Confirming to IS 15658 : 2006 including 35 58.00 700.54 Smt

mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc.

In words: Nine Lakh Ninety Five Thousand Seven Hundred Seventy Six and Zero Paisa only.

Executive Engineer

PGVCL Division Office