Project No156 CONSTRUCTION OF KRISHI BHAVAN VIPANANA KENDRAM

Amount

Construction of Krishibhavan Vipanana Kendra

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD343798/2022-2023:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.(OD from 51.20) cost for 216.14 m2

9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

OD201778/2022-2023:Ridge capping with pre-painted galvanized steel sheets .05 mm thick 60 cm wide including all cost and materials ,conveyance,labor charges,etc.complete

OD201819/2022-2023:Supplying and fixing 150 mm dia PVC rain water gutter half square section including fitting with 32 x 5 mm MS flat supporters at 1 m intervals etc.complete.

50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2

OD359662/2022-2023:Providing and fixing MS sheet door including frame using MS angle ,flat,and MS sheet all necessary fittings complete including applying a priming coat of approved steel primer all materilas and labour charges etc complete Details of cost for one single leaf door size 1.00*2.10m=2.10m2 Material ;- i) Door frame 40*40*6mm angle = 2(2.10+0.99)+10%[email protected]/m=23.80kg II) Shutter frame 35*35*35 mm angle+2(2.05+0.98)+10% wastage [email protected]/m+17.34kg III)MS flat 25*5mm+4*0.98+10%wastage+4.31m@1kg/m+4.31 kg IV)MS sheet 1mm thick 0.98*2.04=2+10%wastage=2.2 sq.m @7.85kg/m2=17.27kg add 2kg for hinges aldrop tower bolt etc total=23.80+17.34+4.31+17.27+2.00=64.72=0.647q excluding wastage=59.01 kg Area of steel primer=1*2.1*2.25=4.73m2

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

OD321943/2022-2023:Providing and fixing Granite of any colour and shade for name board, of required size laid over base of cement mortar 1:4, including all charges etc.

U V SIDHEEK

Mohammed Ashiq UV

Bidder Name

U V SIDHEEK

ANPU INFRA

Mohammed Ashiq UV