Renovation Work of Aanganvadi and Library As per various Location, At, Jetpur-Navagadh Under Aanganvadi Renovation Grant & Shikshak Upkaran Grant (Year-2018-19)(Third Call)

NAME OF WORK:- RENOVATION WORK OF ANGANWADI AND LIBRARY AS PER VARIOUS LOCATION, AT. JETPUR-

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be writen

in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 20,71,783=00 Put to Tender Rs. 20,71,783=00

Add …………………….% Rs. Deduct …………………….% Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Cons. Engineer Engineer

"DESIGN POINT" Jetpur-Navagadh Nagarpalika

Chief Officer President

Jetpur-Navagadh Nagarpalika Jetpur-Navagadh Nagarpalika

JETPUR-NAVAGADH NAGARPALIKA - JETPUR

SCHEME : AANGANVADI RENOVATION GRANT & SHIKSHAK UPKARAN GRANT (YEAR-2018-19)

NAME OF WORK :- RENOVATION WORK OF ANGANWADI

Location :- Bhojadhar, Anganwadi Kendra no.01, At. Jetpur

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift. 155.01 20.84 Sqmt.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift. 40.39 51.45 Sqmt.

Demolition including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work 0.40 1133.89 Cumt

Excavation for foundation upto 1.5 m depth including sorting out and stacking

of useful materials and disposing off the excavated stuff upto all lead. (B) Dense

or Hard soil 7.58 164.82 Cumt

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 Machine

cut stone aggregate 40mm nominal size ) and curring complete including cost of

formwork in (a) Foundation and plinth 0.76 3260.28 Cumt

Providing & Laying controlled cement concrete M-200 and curing complete Including

the cost of formwork and excluding the cost of reinforcement for reinforced concrete

work in Slab (C) Slabs, Landings, Shelves, Balconies, Lintel, Beams, Girders and

Cantilever upto floor two level. 0.59 7631.56 Cumt

Providing and laying reinforcement for R.C.C. work and bending, binding & placing in

position completed upto floor two level Thermo Mechanical Treated Bars as per I.S.

Standard. (FE-415) 59.00 68.33 Kg

White Stone Bela mesonry block in course in superstructure with stone of approved

quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints

etc. complete. 2.39 5476.00 Cumt

(i) Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand) in

foundation and plinth (B) Conventional 1.93 692.32 Sqmt.

Providing 15 mm thick cement plaster in single coat on fair side brick/concrete wall

for interior plastering up to floor two level finished even and smooth in with Floating

coat of neat cement. (i) cement Mortar 1:3 (1 cement : 3 Sand) 15.61 242.01 Sqmt.

20 MM thick sand faced cement plaster on walls upto height 10meters above ground

level consisting of 12 MM thick backing coat of Cement Mortar 1:3 (1-Cement : 3-

Sand) and 8MM thick finishing coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc.

complete. 155.01 330.72 Sqmt.

Providing and fixing EZ-27 section door/ windows frame including welding and

fixtures fastening including 3 coats of approved enamel oil paint etc. complete. 9.82 2491.75 Sqmt

Providing and fixing flush door shutters, solid core construction with frame of firs

class hardwood with cross band and face veneer anodised alluminium butt hinges

eith necessary screws. (B) Non-decorative type and block board core anodized

aluminium butt hinges in flush door shutters. (2) 35 mm. Thick 9.82 1829.74 Sqmt

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1-

Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced

with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in

cement mortar 1:3 and curing complete. (D) 75mm Thick 0.54 856.09 Sqmt

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment

to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm

thick 38.61 1019.39 Sqmt

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. 12.35 1198.64 Sqmt

Providing and laying white glazed tiles 6 mm. Thick in flooring treads of steps and

landings laid on a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse

sand) pointing in white cleaned jointed with white cement slurry. 1.78 964.48 Sqmt

Providing and laying white glazed tiles 6mm thick skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-Cement : 3-Coarse sand) & jointed with white

cement slurry. 15.76 1127.48 Sqmt

Providing and laying broken China Mosaic Flooring for Terrace using 12mm to 20mm

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and

to be tempered to bring mortar crème out upto surface using white cement including

rounding off junctions and extending them up to 15cm. along the wall, clearing with

water and oxalic acid etc. as directed. 40.16 779.70 Sqmt

Providing and mixing water proofing material in cement concrete in mix proportion

recommended b the manufacturers. 7.23 49.16 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth. 125.38 88.39 Sqmt

wall primer of approved brand. 125.38 16.52 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete. 155.01 122.14 Sqmt

Providing, laying and jointing in true line and level for 110mm diameter U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

all materials. 20.00 918.67 Rmt

Providing, laying and jointing in true line and level for 160mm diameter U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

all materials. 30.00 834.38 Rmt

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. 20.00 72.65 Rmt

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. 20.00 91.84 Rmt

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. 20.00 119.15 Rmt

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. 20.00 148.12 Rmt

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm

Providing and fixing screw down bib taps of following size. (A) Brass screw down bib

tap polished bright. (i) 15mm dia. 2.00 186.83 No

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

jali of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls. 2.00 614.19 No

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and trap to be measured and paid for

separately) (A) Vitreous China.(I) Long pattern = White colour 1.00 1034.15 No

Providing and fixing 100mm size "P" or "S" trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement mortar 1:1 [1 cement:

1 coarse sand] [A] Viterous china 1.00 348.22 No

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

white colour. 1.00 1657.09 No

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 1.00 67.91 No

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including

cutting holes in walls and making good the same but excluding fittings. (C) Vitreous

China Sink.(i) 600mm x 450mm x 150mm size. 1.00 2326.66 No

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 3.00 1292.19 No

Providing erecting and fixing double coated ISI water tank of required capacity each

with all necessary fittings and connection etc. complete on terrace. 1000.00 3.95 Litr.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line. 5.00 2932.93 No

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats

with dry masonry work at top for 45cm. height including covering the top with

stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as

directed. 1.00 3516.51 No

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc.

with M.S. flats at required spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill. 148.50 114.44 Kg.

Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed

priming paint brushing red lead. 5.94 38.15 Sqmt.

Painting two coats (excluding priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade including cleaning the surface

an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

ELECTRICALS ITEM

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III 5.00 419.15 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular type switch and hum free

EME four or more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat. III 10.00 241.39 Pt.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (b) 25 mm 50.00 32.32 Rmt

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used

for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) Cat-lll

(A) Tube Light with integral driver

(ii) 12-14 Watts, Surge-2 KV, IP-20, conventional 4 feet 2.00 238.36 No.

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet 2.00 165.64 No.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size. (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm 46.00 78.78 Rmt

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 2.00 112.11 No.

providing and erecting Cast iron earth plate size 45 X 45 X 0.35 cms. buried in

specially prepared 2.5 Mtr. Deep earth Pit complete with necessary G.I. strip in G.I.

pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear, conduit run or

power plug etc. 1.00 856.48 Each

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on

existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (a) single door (IP-

Total Amounts Rs.......…

Total Amounts Rs.......…

Stamp with Signature of Contractor

Consl.Engineer Municipal Engineer

"DESIGN POINT" Jetpur-Navagadh Nagarpalika

Chief Officer President

Jetpur-Navagadh Nagarpalika Jetpur-Navagadh Nagarpalika

JETPUR-NAVAGADH NAGARPALIKA - JETPUR

SCHEME : AANGANVADI RENOVATION GRANT & SHIKSHAK UPKARAN GRANT (YEAR-2018-19)

NAME OF WORK :- RENOVATION WORK OF ANGANWADI

Location :- Darji Society, Anganwadi Kendra no - 1, At. Jetpur

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift 155.01 20.84 Sqmt.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift. 40.39 51.45 Sqmt.

20 MM thick sand faced cement plaster on walls upto height 10meters above ground

level consisting of 12 MM thick backing coat of Cement Mortar 1:3 (1-Cement : 3-

Sand) and 8MM thick finishing coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc.

complete. 238.17 330.72 Sqmt.

Providing 15 mm thick cement plaster in single coat on fair side brick/concrete wall

for interior plastering up to floor two level finished even and smooth in with Floating

coat of neat cement. (i) cement Mortar 1:3 (1 cement : 3 Sand) 15.61 242.01 Sqmt.

Providing and fixing EZ-27 section door/ windows frame including welding and

fixtures fastening including 3 coats of approved enamel oil paint etc. complete. 9.82 2491.75 Sqmt

Providing and fixing flush door shutters, solid core construction with frame of firs

class hardwood with cross band and face veneer anodised alluminium butt hinges

eith necessary screws. (B) Non-decorative type and block board core anodized

aluminium butt hinges in flush door shutters. (2) 35 mm. Thick 9.82 1829.74 Sqmt

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1-

Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced

with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in

cement mortar 1:3 and curing complete. (D) 75mm Thick 0.54 856.09 Sqmt

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment

to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm

thick 38.61 1019.39 Sqmt

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. 12.35 1198.64 Sqmt

Providing and laying white glazed tiles 6 mm. Thick in flooring treads of steps and

landings laid on a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse

sand) pointing in white cleaned jointed with white cement slurry 1.78 964.48 Sqmt

Providing and laying white glazed tiles 6mm thick skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-Cement : 3-Coarse sand) & jointed with white

cement slurry. 15.76 1127.48 Sqmt

Providing and laying broken China Mosaic Flooring for Terrace using 12mm to 20mm

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and

to be tempered to bring mortar crème out upto surface using white cement including

rounding off junctions and extending them up to 15cm. along the wall, clearing with

water and oxalic acid etc. as directed. 40.16 779.70 Sqmt

Providing and mixing water proofing material in cement concrete in mix proportion

recommended b the manufacturers. 7.23 49.16 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth. 125.38 88.39 Sqmt

wall primer of approved brand. 125.38 16.52 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete. 238.17 122.14 Sqmt

Providing, laying and jointing in true line and level for 110mm diameter U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

all materials. 20.00 918.67 Rmt

Providing, laying and jointing in true line and level for 160mm diameter U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

all materials. 30.00 834.38 Rmt

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. 20.00 72.65 Rmt

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. 20.00 91.84 Rmt

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. 20.00 119.15 Rmt

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. 20.00 148.12 Rmt

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm

Providing and fixing screw down bib taps of following size. (A) Brass screw down bib

tap polished bright. (i) 15mm dia. 2.00 186.83 No

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

jali of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls. 2.00 614.19 No

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and trap to be measured and paid for

separately) (A) Vitreous China.(I) Long pattern = White colour 1.00 1034.15 No

Providing and fixing 100mm size "P" or "S" trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement mortar 1:1 [1 cement:

1 coarse sand] [A] Viterous china 1.00 348.22 No

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

white colour. 1.00 1657.09 No

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 1.00 67.91 No

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including

cutting holes in walls and making good the same but excluding fittings. (C) Vitreous

China Sink.(i) 600mm x 450mm x 150mm size 1.00 2326.66 No

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 3.00 1292.19 No

Providing erecting and fixing double coated ISI water tank of required capacity each

with all necessary fittings and connection etc. complete on terrace 1000.00 3.95 Litr.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line. 5.00 2932.93 No

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats

with dry masonry work at top for 45cm. height including covering the top with

stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as

directed. 1.00 3516.51 No

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc.

with M.S. flats at required spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill. 298.50 114.44 Kg.

Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed

priming paint brushing red lead. 11.94 38.15 Sqmt.

Painting two coats (excluding priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade including cleaning the surface

an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Excavation for foundation up to 1.5 mt. depth including sorting out and stacking of

useful materials and disposing of the excavated stuff up to 50 meter lead.(B) Dense

or Hard soil 19.71 164.82 Cumt.

Excavation for foundation from 1.5 mt. to 3.0 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to 50 meter

lead.(B) Dense or Hard soil 10.82 178.82 Cumt.

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 Machine

cut stone aggregate 40mm nominal size ) and curring complete excluding cost of

formwork in (a) Foundation and plinth 11.72 3260.28 Cumt.

Providing & Laying controlled cement concrete M-200 and curing complete including

the cost of formwork and reinforcement for reinforced concrete work in Footing (A)

Foundation footing base of column and mass concrete 2.33 4598.53 Cumt.

Providing & Laying controlled cement concrete M-200 and curing complete including

the cost of formwork and reinforcement for reinforced concrete work in Beam(C)

Slabs, Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor

two level. 0.26 6825.58 Cumt.

Providing & Laying controlled cement concrete M-200 and curing complete excluding

the cost of formwork and reinforcement for reinforced concrete work in Column (D)

Columns, Pillars posts and struts upto floor two level 0.57 7748.72 Cumt.

Providing & Laying controlled cement concrete M-200 and curing complete Including

the cost of formwork and reinforcement for reinforced concrete work in Slab (C)

Slabs, Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor

two level. 0.59 7631.56 Cumt.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20cm. in depth consolidating each disposited

layer by ramming and watering. 9.45 137.47 Cumt.

Providing and laying 1:3:6 (cement :3 Course sand :6 crushed stone aggregate

nominal size) and curing complete including cost of form work in (A) Wall

caps/copping 1.99 4115.74 Cumt.

White Stone Bela mesonry block in course in superstructure with stone of approved

quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints

etc. complete. 12.31 5109.37 Cumt.

(i) Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand) in

foundation and plinth (B) Conventional 1.93 692.32 Sqmt.

Providing and laying reinforcement for R.C.C. work and bending, binding & placing in

position completed upto floor two level Thermo Mechanical Treated Bars as per I.S.

Standard. (FE-415) 452.01 68.33 Kg.

ELECTRICALS ITEM

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III 1.00 419.15 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular type switch and hum free

EME four or more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat. III 1.00 241.39 Pt.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (b) 25 mm 10.00 32.32 Rmt

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used

for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) Cat-lll

(A) Tube Light with integral driver

(ii) 12-14 Watts, Surge-2 KV, IP-20, conventional 4 feet 1.00 238.36 No.

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet 1.00 165.64 No.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size. (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm 10.00 78.78 Rmt

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 1.00 112.11 No.

providing and erecting Cast iron earth plate size 45 X 45 X 0.35 cms. buried in

specially prepared 2.5 Mtr. Deep earth Pit complete with necessary G.I. strip in G.I.

pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear, conduit run or

power plug etc. 1.00 856.48 Each

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on

existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (a) single door (IP-

Total Amounts Rs.......…

Total Amounts Rs.......…

Stamp with Signature of Contractor

Consl.Engineer Municipal Engineer

"DESIGN POINT" Jetpur-Navagadh Nagarpalika

Chief Officer President

Jetpur-Navagadh Nagarpalika Jetpur-Navagadh Nagarpalika

JETPUR-NAVAGADH NAGARPALIKA - JETPUR

SCHEME : AANGANVADI RENOVATION GRANT & SHIKSHAK UPKARAN GRANT (YEAR-2018-19)

NAME OF WORK :- RENOVATION WORK OF ANGANWADI

Location :- Gujarati Wadi, Anganwadi Kendra no - 1, At. Jetpur

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift. 155.01 20.84 Sqmt.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift. 40.39 51.45 Sqmt.

20 MM thick sand faced cement plaster on walls upto height 10meters above ground

level consisting of 12 MM thick backing coat of Cement Mortar 1:3 (1-Cement : 3-

Sand) and 8MM thick finishing coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc.

complete. 155.01 330.72 Sqmt.

Providing and fixing EZ-27 section door/ windows frame including welding and

fixtures fastening including 3 coats of approved enamel oil paint etc. complete. 9.82 2491.75 Sqmt

Providing and fixing flush door shutters, solid core construction with frame of firs

class hardwood with cross band and face veneer anodised alluminium butt hinges

eith necessary screws. (B) Non-decorative type and block board core anodized

aluminium butt hinges in flush door shutters. (2) 35 mm. Thick 9.82 1829.74 Sqmt

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1-

Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced

with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in

cement mortar 1:3 and curing complete. (D) 75mm Thick 0.54 856.09 Sqmt

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment

to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm

thick 38.61 1019.39 Sqmt

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. 12.35 1198.64 Sqmt

Providing and laying white glazed tiles 6 mm. Thick in flooring treads of steps and

landings laid on a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse

sand) pointing in white cleaned jointed with white cement slurry 1.78 964.48 Sqmt

Providing and laying white glazed tiles 6mm thick skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-Cement : 3-Coarse sand) & jointed with white

cement slurry. 15.76 1127.48 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth. 125.38 88.39 Sqmt

wall primer of approved brand. 125.38 16.52 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete. 155.01 122.14 Sqmt

Providing, laying and jointing in true line and level for 110mm diameter U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

all materials. 5.00 918.67 Rmt

Providing, laying and jointing in true line and level for 160mm diameter U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

all materials. 5.00 834.38 Rmt

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

white colour. 1.00 1657.09 No

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 1.00 67.91 No

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc.

with M.S. flats at required spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill. 148.50 114.44 Kg.

Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed

priming paint brushing red lead. 5.94 38.15 Sqmt.

Painting two coats (excluding priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade including cleaning the surface

an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Excavation for foundation upto 1.5 m depth including sorting out and stacking

of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil 4.39 164.82 Cumt.

Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand 6 Machine cut

stone aggregate 40mm nominal size) and curring complete excluding cost of

formwork in (a) Foundation and plinth 9.90 3260.28 Cumt.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. 6.62 299.67 Cumt.

20 MM thick sand faced cement plaster on walls upto height 10meters above ground

level consisting of 12 MM thick backing coat of Cement Mortar 1:3 (1-Cement : 3-

Sand) and 8MM thick finishing coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc.

complete. 4.01 330.72 Sqmt.

Finishing wall with water proofing cement paint of on wall surface (Two coats) to give

an prroved brand and manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and remins of loose powered

materials. 4.01 63.69 Sqmt.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing

in position and applying a priming coat of read lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet. 57.55 734.19 Sqmt.

Providing & laying spreading and compacting 100mm thick WBM Grade - I of

B.T.M.C. metal 45mm to 90mm size including using 29% (22+7%) filler i.e. stone

screeing 13.2 mm at the rate 0.27 Cumt. & stone dust at the rate 0.08 cumt. including

spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes

in stages to proper grade and camber, applying and brooming type of

screning/binding materials to fill up the interstices of coarse aggregate, watering and

compacting to the required density. 4.41 1155.44 Cumt.

Providing and casting in situ controlled cement concrete M-200 for average 75 mm

thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and

fillingin joints with bitumen complete. 4.41 5247.13 Cumt.

ELECTRICALS ITEM

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III 5.00 419.15 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular type switch and hum free

EME four or more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat. III 5.00 241.39 Pt.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (b) 25 mm 60.00 32.32 Rmt

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used

for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) Cat-lll

(A) Tube Light with integral driver

(ii) 12-14 Watts, Surge-2 KV, IP-20, conventional 4 feet 6.00 238.36 No.

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet 6.00 165.64 No.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size. (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm 60.00 78.78 Rmt

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 2.00 112.11 No.

providing and erecting Cast iron earth plate size 45 X 45 X 0.35 cms. buried in

specially prepared 2.5 Mtr. Deep earth Pit complete with necessary G.I. strip in G.I.

pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear, conduit run or

power plug etc. 1.00 856.48 Each

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on

existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (a) single door (IP-

Total Amounts Rs.......…

Total Amounts Rs.......…

Stamp with Signature of Contractor

Consl.Engineer Municipal Engineer

"DESIGN POINT" Jetpur-Navagadh Nagarpalika

Chief Officer President

Jetpur-Navagadh Nagarpalika Jetpur-Navagadh Nagarpalika

JETPUR-NAVAGADH NAGARPALIKA - JETPUR

SCHEME : SHIKSHAK UPKARAN GRANT (YEAR-2018-19)

NAME OF WORK :- RENOVATION WORK OF LIBRARY

Location :- Volleyball Ground, At- Jetpur.

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work 2.14 1133.89 Cumt.

Demolition and disposal of unserviceable materials with

all lead and lift.(i) Cement concrete. 2.97 652.69 Cumt.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift. 103.61 51.45 Sqmt

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift 20.05 20.84 Sqmt

Demolition of Brick work and stone masonry including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift. (i) In Lime

Mortar. 2.12 391.96 Cumt.

Excavation for foundation upto 1.5 m depth including sorting out and stacking

of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil 0.70 164.82 Cumt.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete excluding

cost of formwork in (a) Foundation and plinth 3.68 3260.28 Cumt.

White Stone Bela mesonry block in course in superstructure with stone of

approved quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing

the joints etc. complete. 0.78 5109.37 Cumt.

Providing and laying cement concrete 1:3:6 (1 cement, :3 coarse sand, :

crushed stone aggregate 20 mm norminal size) and curring complete including

cost of form work in (A) Wall caps/coping 0.06 4115.74 Cumt.

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level G.F. 4.00 68.33 Kg.

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A)In beams and

joists, channels angles Tees, flats, with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters, purlins conneted to common rafters

and the like 5.00 9108.48 Qtl

Providing and fixing M.S. grills of required pattern to wooden frames of windows

etc. with M.S. flats at required spacings and frame alround, square or round bars

with round headed bolts and nuts or by screws (A) Plain Grill. 118.95 114.44 Kg.

Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead. 26.98 38.15 Sqmt

Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of all dirt, dust and other

foreign matter. 45.18 96.59 Sqmt

providing & supplying of Abbottsons Steel Bookcases confirming to IS 7761 Grade

STANDARDS AND CERTIFICATIONS

Governing Standard Conformity to IS

IS specification seen and understood Yes

MATERIAL AND FINISH REQUIREMENTS

Mild Steel Sheets Grade 0 of IS

Fabrication material of handle Cast brass confirming to IS

Confirmity of Finish Coat Enamel IS

Additional Requirement NA

DIMENSIONS AND TOLERANCES

Height of Steel bookcase (tolerance: ± 5mm) 1165 mm

Width of Steel bookcase (tolerance: ± 5mm) 840 mm

Depth of Steel bookcase (tolerance: ± 5mm) 305 mm 2.00 10100.00 Nos

providing & supplying of OFFICE HUB Seat only Chair Count

GENERIC REQUIREMENTS

Chair Confirguration Seat only

Number of Seats

Availability of Armrest Yes

Availability of Backrest Yes

Seat and backrest configuration Combined seat and back

Availability of table with chair No

Positioning of table within chair NA

DIMENSIONS AND TOLERANCES

Overall Length (minimum) (Length indicates end-to-end measurement, including

armrest, if available) 1100 mm

Overall Height (minimum)(floor to backrest top) 750 mm

Floor to Seat Height (measured from ground to front of seat) (minimum) 400 mm

Depth of the seat (minimum) 400 mm

Width of the Seat (minimum) 450 mm

Material of chair mainframe M S ERW tube

Thickness of material in chair mainframe 1.5 - 2.0 mm

Material of Support for Chair Mainframe (Base/legs) cold rolled steel

Finish of Support for Chair Mainframe (Base/Legs) Powder coated (50 microns)

Color family of Support for Chair Mainframe (Base/Legs) Silver

Availability of soft-grip in bottom of Mainframe support No

Material of Chair Seat Mild Steel

Thickness of Chair Seat 1.5 - 2.0 mm

Availability of Separate Cushion/Foam on Chair Seat No

Armrest Configuration (Hint: In case of No armrest, select NA) Only at extreme

Material of Chair Armrest Mild Steel

Availability of Padding on Armrest on Chair Seat No

Padding Material on Armrest of Chair Seat NA

Material Thickness in Chair Armrest 1.5 - 2.0 mm

Color Family of Chair Armrest Black

Material of Chair Backrest Mild Steel

Thickness of Chair backrest 1.5 - 2.0 mm

Configuration of Chair Backrest Full-back

Availability of Separate Cushion/Foam on Chair backrest No

Availability of warraty Yes

Warranty period (in months) 12 11.00 10100.00 Nos

providing & supplying of R. L. G Garg Furniture Legs Office Chair Non-revolving

and non-tilting chair with armrest

Chair understructure type Legs

Understructure material Mild steel

The shape of tubular section of understructure Round

Section Size (Diameter/Sides) of understructure 22 mm

Understructure wall thickness (mm)

Minimum thickness (in mm) of MS plate Joining the understructure with seat

Shoe/Studs material PVC

Understructure finish Chrome plating

Seat base material Hot pressed plywood

Seat material Moulded PU

Density of PU used in seat (kg per cubic meter) >30<=40

Actual density of PU used in seat (kg per cubic meter)

Thickness of PU used in seat (mm) <=30

Actual thickness of PU used in seat (mm) 35 millimeter

Minimum seat height from floor surface (mm) >400<=500

Actual seat height from floor surface (mm) 420 millimeter

Width of seat (mm) >400<=450

Actual width of seat (mm) 420 millimeter

Depth of seat (mm) >400<=450

Actual depth of seat (mm) 420 millimeter

Seat upholstery material Leatherette

Upholstered material seat colour Black

Backrest base frame material Hot pressed plywood

Backrest material Hot pressed plywood

Density of PU used in backrest (kg per cubic meter) >30<=40

Actual density of PU used in backrest (kg per cubic meter)

Thickness of PU used in backrest (mm) NA

Actual thickness of PU used in backrest (mm) 35 millimeter

Width of backrest (mm) >400<=450

Actual width of backrest (mm) 420 millimeter

Backrest height from the seat level >=350<=450

Actual backrest height 430 millimeter

Backrest upholstery material Leatherette

Upholstered material backrest colour Black

Armrest type Moulded armrest continuously fitted with seat and back

Armrest movement Fixed

Armrest understructure material MS with chrome plated

Armrest top material PU - Polyurethane

Warranty period in number of years 1 year 3.00 1515.00 Nos

providing & supplying of SHRIVASTAVA CHAIR Revolving Chair With Arm

OnlyRevolving without tilting mechanism

SHRIVASTAVA CHAIR

GENERAL REQUIREMENT

Chair mechanism

Only Revolving without tilting mechanism

Mechanism designed with 360 degree-revolving type and upright locking

Chair included the pneumatic heightadjustments

Height Adjustment ± 5(mm)

Type of backrest support

Adjustable Lumbar Support

Ergonomic Seat Design

Backrest has separate adjustable headrest

Locking mechanism

Type of locking

Upright locking

Number of arm movement

Stainless Steel

Twin wheel castor material

Number of twin wheel castor

Twin wheel castor diameter

Armrest Material

Backrest is made of

One piece injection moulded frame

Density of PU foam used in seat KG per CuMeter (± 3)

Density of PU foam used in backrest in KGper Cu Meter (±3)

Backrest upholstered with

Seat upholstered with

GSM/Thickness of fabric ±5%(Gram/Squaremeter)

Upholstered material colour

Overall width (±10 mm)

Backrest Height ±15 mm

Backrest Width ±10 mm

Seat Height ±10 mm

Seat Width ±10 mm

Seat Depth ±10 mm

Thickness of MS Plate Joining the understructure with Seat

Thickness of Plywood used in Seat ±1(mm)

Thickness of Plywood used in Backrest ±1(mm)

Pedestal Size (Diameter in mm) ±10 mm

Thickness of Polyurethane Foam Used inSeat in mm (±2 mm)

Thickness of Polyurethane Foam Used inBackrest in mm((±2 mm)

20 MM thick sand faced cement plaster on walls upto height 10meters above

ground level consisting of 12 MM thick backing coat of Cement Mortar 1:3 (1-

Cement : 3-Sand) and 8MM thick finishing coat of Cement Mortar 1:1 (1-Cement :

1-Sand) etc. complete. 25.25 330.72 Sqmt.

Providing and laying polished kota stone slab flooring over 20 mm (average) thick

base of cement mortar 1:6 ( 1 cement : 6 course sand) or L.M. 1:1.5 laid over and

jointed with grey cement slurry including rubbing and polishing etc. complete

rubbing and polishing etc. complete (A) 25 mm thick 13.50 1019.39 Sqmt.

Providing and laying white glazed tiles 6 mm. Thick in flooring treads of steps and

landings laid on a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse

sand) pointing in white cleaned jointed with white cement slurry 20.24 964.48 Sqmt.

Providing and laying white glazed tiles 6mm thick skrting risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-Cement : 3-Coarse sand) & jointed with white

cement slurry. 58.91 1127.48 Sqmt.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth. 488.03 88.39 Sqmt.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered materials.etc complete.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 12.00 1292.19 No.

Providing and fixing screw down bib taps of following size. (A) Brass screw down

bib tap polished bright. (i) 15mm dia. 2.00 186.83 No.

Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm

Providing and fixing Urinal of approved quality including connection with trap and

with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting holes and making good the same but

excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour. 2.00 1657.09 No.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 2.00 67.91 No.

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

required capacity each with all necessary fittings and connection etc. complete on

terrace. 1000.00 3.95 Litr.

Providing, laying a Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials. 25.00 918.67 Rmt.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing chromium plated brass half trun flush cock of approved quality

including fixing in pipe line etc. complete. (ii) 25mm dia. 2.00 263.77 No.

Providing and fixing brass screw down stop tap. 10.00 220.82 No.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling

brickbats with dry masonry work at top for 45cm. height including covering the

top with stone including providing vatas in C.M. 1:3 with finishing curing etc.

complete as directed. 1.00 3516.51 No.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight

of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line. 3.00 2932.93 No.

Providing and laying broken China Mosaic Flooring for Terrace using 12mm to

20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar crème out upto surface using white

cement including rounding off junctions and extending them up to 15cm. along the

wall, clearing with water and oxalic acid etc. as directed. 32.81 779.70 Sqmt.

Providing and mixing Dr. Fixit water proofing material in cement concrete in mix

proportion recommended b the manufacturers. 5.90 49.16 Lit/Kg.

providing & supplying of Davis One seater classroom desking

GENERAL REQUIREMENT

Classroom desking and seating type One seater classroom desking

Style Desking and seating (Separate)

Desking with shelf (under storage) No

Provision of hook in desk Not required

Desking with modesty panel Not required

Provision of PU foam Not required

Desking under structure (support frame type) H-Type frame

Seating under structure (support frame type) H-Type frame

Design /drawing of classroom desking and seating (for reference) Modular type

Mode of Supply Assembled ready to use

Desking under structure support and frame material Steel tubes confirming to IS

3074 – 2013 (with latest amendment)

Thickness of desking under structure support and frame material (± 5%) 1.6 mm

Seating under structure support and frame material Steel tubes confirming to IS

3074 – 2013 (with latest amendment)

Thickness of seating under structure support and frame material (± 5%) 2 mm

Shelf (under storage) material Not required

Thickness /diameter of shelf (under storage) material (± 5 %) Not required

Desking top material Prelaminated Particle board Grade I type II confirming to IS

12823 (with latest amendment)

Thickness of desking top material (± 5 %) 18 mm

Seating material Prelaminated Particle board Grade I type II confirming to IS

12823 (with latest amendment)

Thickness of seating material (± 5 %) 18 mm

Backrest material Prelaminated Particle board Grade I type II confirming to IS

12823 (with latest amendment)

Thickness of backrest material (± 5 %) 15 mm

Modesty panel material Not required

Thickness of modesty panel material (± 5 %) Not required

Desking /side material Prelaminated Particle board Grade I type II confirming to IS

12823 (with with latest amendment)

Thickness of desking /side material (± 5 %) 2 mm

Seating side material Prelaminated Particles board (wood product) of grade II type

III of IS 12823 (with latest amendment)

Length of Desking, Seating and Backrest (±10 mm) 700 mm

Width of desk top material (± 5 mm) 350 mm

Width of seat material (± 5 mm) 380 mm

Width of the backrest material (± 5 mm) 200 mm

Height of desk top from floor (±5 mm) 700 mm

Width of uplift modesty panel Not required

Height of Seat from floor (± 5 mm) 340 mm

Size of desking under structure support and frame material (L x W /major axis x

minor axis /diameter) 25 X 25 (mm)

Size of seating under structure support and frame material (L x W /major axis x

minor axis /Diameter) (± 2 mm) 25 X 25 (mm)

Distance between table top edge and seat edge (± 2 mm) 140 mm

COLOUR AND FINISH

Colour of finish Brown

Material of Finish /Lamination (for other than metal) Not required

Thickness of Finish /Lamination (for other than metal) Not required

Material of Finish /Lamination (for metal) Duly epoxy polyester powder coated

Warranty period 1 Year 15.00 2525.00 No.

ELECTRICALS ITEM

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following type, erected on

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III 1.00 419.15 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected with 6A Modular type switch and hum

free EME four or more step type electronic fan regulator with separately mounted

and accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Cat. III 1.00 598.93 No.

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat. III 1.00 241.39 Pt.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (b) 25 mm 10.00 32.32 Rmt

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED

used for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.) Cat-lll

(A) Tube Light with integral driver

(ii) 12-14 Watts, Surge-2 KV, IP-20, conventional 4 feet 1.00 238.36 No.

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet 1.00 165.64 No.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size. (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 1.00 112.11 No.

providing and erecting Cast iron earth plate size 45 X 45 X 0.35 cms. buried

in specially prepared 2.5 Mtr. Deep earth Pit complete with necessary G.I. strip in

G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear, conduit

run or power plug etc. 1.00 856.48 Each

Providing and erecting Approved make Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing. [Make shall be approved by

Engineer in charge] 1.00 1596.81 Each

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (a) single door (IP-

Total Amounts Rs.......…

Total Amounts Rs.......…

Stamp with Signature of Contractor

Consl.Engineer Municipal Engineer

"DESIGN POINT" Jetpur-Navagadh Nagarpalika

Chief Officer President

Jetpur-Navagadh Nagarpalika Jetpur-Navagadh Nagarpalika