Fabrication and erection of shutter and Hoisting mechanism at Edakkidom Flush escape shutter

Amount

Cleaning of work site, dismantling the old damaged mechanical structures, demolishing the existing civil structure and providing concrete for fixing new embedded parts etc.

OD24477/2022-2023:Clearing grass from banks of canal and removal of silt, zoological waste and other debris from canal bed including removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared

OD24478/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embedded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by the departmental officer at the site. (weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80 % )

15.1:Demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres lead as per direction of Engineer - in- Charges.

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.8:Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:11/2:3 (1 cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply,Fabrication & fixing of new embedded parts.

OD24461/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD24462/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD24463/2022-2023:Supply of MS round bar including cost of conveyance charges

OD24464/2022-2023:Fabrication and erection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD24465/2022-2023:Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in correct position and alignment by welding SS Embedded parts in 304L Grade as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, welding, shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete.

Supply,Fabrication and Painting of shutter and hoisting structure

OD24466/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD24467/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD24468/2022-2023:Supply of M.S Bolt with nut and washer

OD24469/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight )/Hoisting Bridge /Platfurm and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Supply and fixing of new hoisting mechanism,shutter rollers, screw rods, new rubber seals, etc. and erection of shutter, hoisting structure etc. and conducting trial run.

OD24470/2022-2023:Supplying and fixing in correct position with specified initial interface L-type/Bulbnose rubber seal confirming to IS 11855 to the canal shutters including cost of MS bolts and nuts ,all labour, machinery, incidental and conveyance chargers complete as per approved specification and drawing

OD24471/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labour and machinery and incidental and conveyance chargers complete as per approved specification and drawing.

OD24472/2022-2023:Providing EN 8 screw rod 7.50 tonn capacity 4.00M lift screw hoist having one number of EN 8 screw shaft having a lifting speed of around 5cm/ min for 24 rpm of hand operation including cost of all materials, hire charges and conveyance (67mm dia). 1m screw rod dia 67 mm with single start square thread with head pitch of 12.7mm root dia 62.3 mm EN -8 shaft.

OD24473/2022-2023:Providing of Double worm and pinion having a lifting speed of around 5.00 cm/min for hand operation /manual operation including cost of all materials, labor, hire charges and conveyance.

OD27708/2024-2025:Spplying and Fixing cast steel thrust roller assenbly for vertical lift gate having 140mm Dia, 70mm tread width, SS(304) shaft with bronze Bush and accessories as per approved specifications and drawings including cost of all materials,machineries, labour , all lift and lead, incidental and conveyance charges etc complete

OD24475/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , ladder etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied.

OD24476/2022-2023:Trail run the gates with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. As per instruction of departmental officers in charge

RINU KURIAN (BID ID -2083284)

Bidder Name

JOBIN JOSEPH

RINU KURIAN