SPECIAL REPAIR TO BUILDING NO P 170 MCPO CPO MESS INS GARUDA AND OTHER SANCTIONED WORK OF AGE BR III UNDER GE NW KOCHI

Amount

Demolition of brick work or stone, boulder, precast PCC block masonry including all quoins, arches, pillar, etc. built in cement mortar or cement lime mortar compleate all as specified and directed by Engr -in-Charge.

Dismantling of wall and ceiling boards (fiber, pulp insulation etc.) or insulation boards / slabs / blankets, any thickness including fillet compleate all as specified and directed by Engr -In-Charge.

M & L for pre-cast cement concrete block masonry with solid blocks of cement concrete exc. 10 cm width and setting in cement mortar 1:6 type C-1, 1:3:6 (using 20 mm graded stone aggregate) compleate all as specified and directed by Engr -in-Charge.

Taking down cement or cement lime plaster from brick work or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc compleate all as specified and directed by Engr -in-Charge.

M & L for 10 mm thick plaster on other than fair faces of brick work or concrete surfaces cement mortar 1:6 finished even and smooth without using extra cement compleate all as specified and directed by Engr -in-Charge.

M&L for rendering 5mm thick CM 1:3 on fair faces of brick work or concrete surfaces in ceiling compleate all as specified and directed by Engr -in-Charge.

M & L for 15 mm thick rendering in CM 1:4 with WPC on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement compleate all as specified and directed by Engr -in-Charge.(WPC shall be measured and paid separately)

Supply only Integral water proofing compound compleate all as specified and directed by Engr -in-Charge.

M&L for applying three coat of white washing on newly plastered surfaces in ceiling compleate all as specified and directed by Engr -in-Charge.

S & F in repairs 605 x 605 mm size of grid Anodised aluminium snap grid frame work for false ceiling compleate all as specified and directed by Engr -in-Charge.

S & F Hangers 6 mm dia G.I (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60 mm long compleate all as specified and directed by Engr -in-Charge.

S & F 4 mm thick Non asbestos fibre cement buliding boards fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling flat or sloping compleate all as specified and directed by Engr -in-Charge.

M & L for preparation of new perforated board surfaces and applying two coat of oil bound distemper over a coat of primer complete on walls compleate all as specified and directed by Engr -in-Charge.

Taking down the existing roof treatment including roof tiles, plaster and cleaning the surface with wire brush and remove all dirt,dust etc compleate all as specified and directed by Engr -in-Charge.

M&L for 15mm thick screed bed or bedding layer of cement mortar 1:3 for roof tratment compleate all as specified and directed by Engr -in-Charge.

M&L for water proofing treatment over RCC slab by applying oil bound bitumen primer @ 0.20 kg/sqm providing and providing and laying 4mm thick APP modified water proofing membrane of make BASF/M/S Fosroc/IWL/STP Ltd weighing not less than 4.00 kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gm/ Sqm having soften point not less than 140C longituinal tensile strength not less than 650 N/Sqm tearing strength of 180 N/Sqm Torque application, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/Sqm finished with solar reflective/ bituminus aluminium paint @ 0.10 Kg/Sqm compleate all as specified and directed by Engr -in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of premises compleate all as specified and directed by Engr -in-Charge.

M & L for 15 mm thick screed bed or bedding layer in cement mortatr 1:4 for laying floor finishes finished even and rough suitable for laying floor tiles compleate all as specified and directed by Engr -in-Charge.

M&L vitrified ceramic coloured tiles 10mm thick square/rectangular polished area of each tiles n exc 0.36 Sqm (600 x 600 mm size) in floors etc set and jointed in neat cement slurry and pointed white and fixing of tiles with chemicals on the existing floor compleate all as specified and directed by Engr -in-Charge.

M&L vitrified ceramic coloured tiles 10mm thick square/rectangular in skirting/ dado laid over cement screed backing coat in CM 1:4, 10mm thick and jointed with grey cement slurry, and pointed with white cement with dmixture of pigment to match the shade of tiles including grinding and polishing compleate all as specified and directed by Engr -in-Charge.

M&L for Glazed ceramic tiles coloured , as in vertical surfaces, size 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10 mm thick rendering in CM 1:3 compleate all as specified and directed by Engr -in-Charge.

Non - skid Ceramic coloured tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match compleate all as specified and directed by Engr -in-Charge.

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing compleate all as specified and directed by Engr -in-Charge.

M & L for 75 mm thick cement concrete type B-1 1:2:4 (20 mm graded aggregate) as in floors compleate all as specified and directed by Engr -in-Charge.

Complete removal of existing treatment of exterior surface incl washing, rubbing, downstopping of distempered and painted surface compleate all as specified and directed by Engr -in-Charge.

M&L for applying a coat of primer and two coats of apex/ ultima antifungal paint over primer compleate all as specified and directed by Engr -in-Charge.

M&L for complete removal of existing treatment from walls & two coats of oil bound distember over a coat of alkali resistant primer compleate all as specified and directed by Engr -in-Charge.

M&L for preperation on new surfaces & two coats of oil bound distember over a coat of alkali resistant primer compleate all as specified and directed by Engr -in-Charge.

M&L for complete removal of existing treatment from ceiling and appling two coat of white washing compleate all as specified and directed by Engr -in-Charge.

M & L for preparation of old wooden surfaces of any description, exc. 10 cm width of girth and applying two coats of synthetic enamel paint over a coat of pink primer compleate all as specified and directed by Engr -in-Charge.

M&L for preparing old surfaces of steel based materials, of any description and girth, not otherwise described, over 10 cm width or girth with one coats of of synthetic enamel paint over a coat of red oxide primer compleate all as specified and directed by Engr -in-Charge.

Taking down chowkats or frames with shutters exc 1.5 sqm but not exc 4 sqm each compleate all as specified and directed by Engr -in-Charge.

Taking down chowkats or frames with shutters nexc 1.5 sqm each compleate all as specified and directed by Engr -in-Charge.

S & F Anodised aluminium with powder coating (minimum thickness of powder coating 50 micron) frame for partitions/ glazing / windows with one or more rebates, alumiinum cleats for fixing particle boards etc compleate all as specified and directed by Engr -in-Charge.

S&F for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc compleate all as specified and directed by Engr -in-Charge.

S & F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty square n.exc 5 sqm in each pane compleate all as specified and directed by Engr -in-Charge.

M&L for 9 mm thick Prelaminatd particle board, exterior grade, prelaminated both side with decorative choice lamination with screws to timber frame work compleate all as specified and directed by Engr -in-Charge.

S&F Aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified compleate all as specified and directed by Engr -in-Charge.

S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples compleate all as specified and directed by Engr -in-Charge.

S&F Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc..(minimum thickness of powder coating 50 micron)compleate all as specified and directed by Engr -in-Charge.

S&F powder coated Aluminium sections for deco grill of aparture 60 mm X 60 mm X 6 mm compleate all as specified and directed by Engr -in-Charge.

M&L for 4 mm thick sheet glass ,ordinary quality and glazing in square n exc 0.5 sqm in each pane compleate all as specified and directed by Engr -in-Charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing compleate all as specified and directed by Engr -in-Charge.

S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site with wood free EPS compleate all as specified and directed by Engr -in-Charge.

S&Fixed in repairs vitreous china wash down water closet pan(pedestal pattern) white incl fixing bolts,plastic water closet seat cover white closed pattern with flat bottom and cover and PVC valve less,low level flushing cistern ,10 ltr capacity,white symphonic action with inlet, ball valve, float and handle including flush pipe and brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia and ms CP or aluminised hinging device and connection to drain and flushing pipe, antisyphonage pipe etc compleate all as specified and directed by Engr -in-Charge.

S & F in repairs in vitreous china wash basin white, flat back, size 630 x 450 mm excluding taps, waste, chain and but including brackets, cutting for and pinning in as required compleate all as specified and directed by Engr -in-Charge.

S&F in repairs of Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe compleate all as specified and directed by Engr -in-Charge.

S&F of pillar taps, cast copper alloy with capstan heads , Chromium plated screwed down high pressure with or without lettered "Hot " or "cold" with long screwed shanks and fly nuts , screwed for iron pipes (Taking down and fixing included with Wash hand basin) compleate all as specified and directed by Engr -in-Charge.

S&F of Waste coupling of PTMT with discharge pipe bore dia of 32mm( half or full threaded) Minimum wt 32mm-45 gms (Taking down and fixing included with Wash hand basin) compleate all as specified and directed by Engr -in-Charge.

S & F in repairs 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flange, including one pair fixing brackets compleate all as specified and directed by Engr -in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) compleate all as specified and directed by Engr -in-Charge.

S& F PVC (SWR) pipes single socketed 150 mm dia in any length with rubber ring joints fixed to walls incl PVC clamps compleate all as specified and directed by Engr -in-Charge.

S& F PVC (SWR) bends/ shoes any radius having bore diameter 150 mm compleate all as specified and directed by Engr -in-Charge.

Dismantling of plain of corrugated steel sheeting/AC sheet, any gauge, thickness including roof/cladding/wall covering compleate all as specified and directed by Engr -in-Charge.

Demolition of concrete of any description and in any position not otherwise specifically provided for compleate all as specified and directed by Engr -in-Charge.

S & F Pre- painted galvalume roofing system aluminum zinc coating GI based corrugated steel sheet 0.50 mm total thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws shall be continous with no joints compleate all as specified and directed by Engr -in-Charge.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm total thick of an colour having tensile strength of 550 Mpa as in roofs/walls/eaves boards, gutters and ridges fixed with self tapping screws compleate all as specified and directed by Engr -in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and raming earth or broken rubble mid=xed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface for soft/ loose soil compleate all as specified and directed by Engr -in-Charge.

M&L PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in post holes and mass concrete compleate all as specified and directed by Engr -in-Charge.

S & F MS tubular frames including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 Gde St-240 and painted one shop coat of zinc primer including preparation of surfaces compleate all as specified and directed by Engr -in-Charge.

S&F MS tubular purlins including brackets and all necessary connection compleate all as specified and directed by Engr -in-Charge.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with two coat of synthetic enamel paint over a coat red oxide compleate all as specified and directed by Engr -in-Charge.

M&L for 100 mm thick cement concrete (1:4:8) type D2 (40mm graded aggregate) compleate all as specified and directed by Engr -in-Charge.

M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes compleate all as specified and directed by Engr -in-Charge.

M&L for Chequered cement concrete tiles 20 cmx20 cmx25 mm thick set, jointed in neat cement slurry in floors with grey cement and pigment compleate all as specified and directed by Engr -in-Charge.

M & L for 10 mm thick plaster on other than fair faces of brick work or concrete surfaces cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for fixing wall tiles compleate all as specified and directed by Engr -in-Charge.

M&L for Glazed ceramic tiles coloured , as in vertical surfaces, size 300 x 450 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles compleate all as specified and directed by Engr -in-Charge.

M & L for 15 mm thick screed bed or bedding layer in cement mortatr 1:4 for laying floor finishes finished even and rough suitable for laying floor tiles compleate all as specified and directed by Engr -in-Charge.

M&L Non - skid Ceramic tiles light shade 7 to 8 mm thick in skirting/ dado over cement screed backing coat of 10mm thick 1:3 area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match compleate all as specified and directed by Engr -in-Charge.

S&F for 10mm thick PVC plain colour pace sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Linning, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent Cement and fixing at site compleate all as specified and directed by Engr -in-Charge.

S&F for anodised aluminium frame work for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc compleate all as specified and directed by Engr -in-Charge.

S&F Door closer cast iron body hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed compleate all as specified and directed by Engr -in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc compleate all as specified and directed by Engr -in-Charge.

M&L point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sqmm PVC insulated unsheathed FRLSH grade confirming to IS-694 multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic medium grade of suitable size with all conduit accessories on wall except beam, column and RCC roof and chases cutting incl 2 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire green colour for one light/fan point controlled by one switch compleate all as specified and directed by Engr -in-Charge.

All as per item No 75 above but for one 5 pin 5 amps socket outlet an independent board compleate all as specified and directed by Engr -in-Charge.

All as per item No 75 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board compleate all as specified and directed by Engr -in-Charge.

S&F switch piano flush type 5A one way compleate all as specified and directed by Engr -in-Charge.

S&F S/S combination 5 pin 5 Amps flush type compleate all as specified and directed by Engr -in-Charge.

S&F S/S combination 6 pin 15 Amps flush type multi purpose compleate all as specified and directed by Engr -in-Charge.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals compleate all as specified and directed by Engr -in-Charge.

S & F in repair fan regulator electronic step type 100 W, 250 Volts compleate all as specified and directed by Engr -in-Charge.

Supply and fixing of heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep compleate all as specified and directed by Engr -in-Charge. model -turbojet SP of Crompton/Usha/VGuard.

S&F Tubelight fitting 1 x20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one compleate all as specified and directed by Engr -in-Charge.. Make: Philips Cat part No;TMC501 P1XT- LED 22W P3241+ESSENTIAL LED TUBE 1200MM 20W 865 T8 INDI-2100 lm/Crompton/WIPRO

S&F LED ceiling light fitting 2'x2' 36 Watt recessed full lit luminaire with glare free uniform illumination (100 lumen/watt) Make : Crompton Cat Part No. LCTLRF6-36-CDL compleate all as specified and directed by Engr -in-Charge.

Taking down old DBs from existing position including MCB,s compleate all as specified and directed by Engr -in-Charge.

S&F Sheet metal enclosure SPN DB when MCB's to be used 4 way with 200 amps bus bar double door IP-43 recessed flush with wall compleate all as specified and directed by Engr -in-Charge.

S&F Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door IP-43 recessed flush with wall compleate all as specified and directed by Engr -in-Charge.

S&F Sheet metal enclosure TPN DB when MCB's to be used 4 way with 200 amps bus bar double door IP-43 recessed flush with wall compleate all as specified and directed by Engr -in-Charge.

S&F MCCB TPN 100 amp ,415 volts ,16 KA compleate all as specified and directed by Engr -in-Charge. Cat part No -408683 of Legrand /Indo asian /L&T.

S&F MCB TPN 63 Amps ,230 volt compleate all as specified and directed by Engr -in-Charge. Cat part no -408683 of Legrand

S&FMCB SPN 6 to 32 Amp ,240 Volts,10 KA compleate all as specified and directed by Engr -in-Charge.Cat part No -408617 of Legrand/ Indo Asian /L&T.

S&FMCB Sp 6 to 32 Amp ,240 Volts,10 KA compleate all as specified and directed by Engr -in-Charge. Cat part No -408595 of Legrand/ L&T/Indo Asian

S & F in repair SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, compleate all as specified and directed by Engr -in-Charge.

Taking down old sub main wiring of any size compleate all as specified and directed by Engr -in-Charge.

M&L for sub main wiring using Proper colour coding 1100 volts grade with 2 runs of 4 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 1 run of 4 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good distrubed surface to match with existing surfacecompleate all as specified and directed by Engr -in-Charge. Note -1. 2 runs of 4 Sqmm sub main wire and one run of 4 sq mm for earthing and PVC conduit Pipe with accesories shall be measured as one unit.

M&L for sub main wiring with 4 runs of 10 Sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 10 Sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good distrubed surface to match with existing surface compleate all as specified and directed by Engr -in-Charge. Note -1. 4 runs of 10 Sqmm sub main wire and one run of 10 sq mm for earthing and PVC conduit pipe with accesories shall be measured as one unit. 2. including taking down old unserviceable sub main wiring

M & L Taking down 1200/1400mm sweep ceiling fan, preparing the surfaces of ceiling fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan compleate all as specified and directed by Engr -in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iorn strip 25x4mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 3 ( of SSR Part-i connected to earthing test pit all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcol dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion compleate all as specified and directed by Engr -in-Charge.

Taking down old stop valve,stop cock,bib cock ,swivel shower,from existing position including all fittings compleate all as specified and directed by Engr -in-Charge.

Supply & fix stop valve (angle type) cast copper alloy high pressure,screwed for 15mm dia CP fancy type (Half turn) .Make:-CERA/JAGUAR/HINDWARE compleate all as specified and directed by Engr -in-Charge.

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm compleate all as specified and directed by Engr -in-Charge. .Make:-CERA/JAGUAR/HINDWARE

Supply & fix of bib cock short body chromium plated with flange and aerator CP fancy type of size 15mm Make:-CERA/JAGUAR/HINDWARE compleate all as specified and directed by Engr -in-Charge.

Supply & fixing of swivel shower of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT .Make:-CERA/JAGUAR/HINDWARE compleate all as specified and directed by Engr -in-Charge.

Supply & fixing of PVC connections 15mm dia size with PTMT nuts of length 450mm and taking down old one complete with brass union on both sides to suit 15mm GI pipe compleate all as specified and directed by Engr -in-Charge.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11 & plain SDR 11 fittings.Make:- Supreme compleate all as specified and directed by Engr -in-Charge.

Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters compleate all as specified and directed by Engr -in-Charge.

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings.Make:- Supreme compleate all as specified and directed by Engr -in-Charge.

Taking down old unserviceable GI tubing of size 25mm compleate all as specified and directed by Engr -in-Charge.

Taking down old unserviceable GI tubing of size 20mm compleate all as specified and directed by Engr -in-Charge.

Vidya constructions

Albert Rebello and Company

MS BUILDERS

M/s Antony Kallarakkal

SUKU CONSTRUCTIONS

M/s ANTONY THOMAS AND CO

M/s.Rejoy Constructions

SHAIJAL T M

EIS IDEAL CONSTRUCTIONS INDIA P LTD