Creation of CMC centre for City-1 & 2 and rural Division under Bhavnagar Circle.

Name of work :- Creation of CMC centre for city-1, city-2 & Rural division at existing

gymnesium of circle office bhavnagar including wall panelling, cupboard shutter, wooden

partition, wooden table etc… and misc. other civil work under circle office Bhavnagar.

Description Qty Rate (Rs.) Per Amount (Rs.)

Providing and fixing wall panelling, using frame of

18MM plywood with 12MM plywood at frontside with

laminate of approved shade for all sides and inside

white laminate including materials such as beading

strips, adhesive having good quality including labour

complete in all respect as directed by EIC.

Providing & fixing of wall cupboard shutters using

18MM plywood with Wood Framing size of 25 x

mm, decorative laminate of approved shade & brand on

front side and backside with white laminated sheet.

Including finishing with beading patti and polishing the

same. Fixing of door with hinges, one number of magnet

and door handle on each door and one number of door

lock and stopper for locking arrangement good quality

etc. Complete including materials and labour as

direction of Engineer in charge.

Providing and fixing wooden partition of sandwich

type36mm thick made up of @ 600mm x 600mm grid

made up of 18mm thick plywood frame with 6mm thick

3 plywood on either side laminated with 1.00mm 15.00 5046.00 Smt

decorative sunmica of approved design including

bidding and polishing of same inclusive of all types of

material and labour etc.. complete as directed by EIC.

Providing and fixing of table of depth 610mm using

18mm plywood, 12mm plywood and 6mm plywood,

with three drawer rightside and one shutter at left side of

req. size with decorative laminate of approved shade

and brand on front, both sides and top with white

4 laminated sheet at inside drawer including finishing with 9.00 10583.00 Smt

bedding patti and polishing the same. Fixing drawer

with channel and req. fittings, locking arrangement and

door with req. hinges, magnet and door handle on each

door and one numberof door lock etc. complete

including materials and labour as directed by EIC.

Providing and fixing PVC carpet flooring work with

5 mm thickness, fixing with St chemical to existing floor 66.00 1002.00 Smt

in line and level as directed by EIC.

Providing and fixing eco-friendly light weight calcium

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate

tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped

6 galvanized steel sections (galvanizing @120 grams per 66.00 1657.57 Smt

sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and size

of 24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main ‘T’ at

600mm centre to centre to form agrid of 1200X600mm

and secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to

form grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated

steel of size (24X24X3000mm made of 0.40mm thick

Finishing wall with weather proof exterior emulsion

on wall surface (two coats) to give an required shape

even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered

materials.etc complete

Scraping oil paint from steel and other metal surface

and making the surface even (with Hand Scraping.)

Painting two coats (excluding priming coat) on

8 previously painted steel and other metal surface with 44.00 169.05 Smt

enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign

In words: Rs. Nine Lakh Eighty Three Thousand Six Hundred Fifty Nine and Fifty Five Paisa Only

The bidders are requested to submit price – bid (Schedule – B) on-line only and not to submit the

price bid in physical form. This is mandatory. If price bid is submitted in physical form, same will

not be opened and only on -line submitted price bid will be considered for evaluation.