Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAdmitted-Fee/PreQual/Technical/Finance | ₹1.7 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹1.7 L+₹2,973.03 (1.76%)Admitted-Fee/PreQual/Technical/Finance | ₹1.7 L+₹2,973.03 (1.76%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | V SUNIL KUMAR L2 | palasseril L1 |
|---|---|---|---|---|---|
| 1.00DETAILED ESTIMATE | |||||
| 1.00 | OD56348/2026-2027:Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & ramp; shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 71.41 | sqm | 1,120 ₹79,979.2 | 1,106 ₹78,979.46 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.87 | cum | 9,300 ₹17,418.9 | 9,235 ₹17,297.16 Lowest |
| 1.00 | OD56351/2026-2027:Supplying and fabricating PVC door with frame locally available best quality
materials, including cost of all fittings, labour charges etc. | 1 | each | 3,000 ₹3,000 | 2,903 ₹2,903 Lowest |
| 1.00 | 18.49.1:Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore | 2 | each | 600 ₹1,200 | 544 ₹1,088 Lowest |
| 1.00 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 17.4 | kg | 600 ₹10,440 | 544 ₹9,465.6 Lowest |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 4.35 | sqm | 1,300 ₹5,655 | 1,277 ₹5,554.95 Lowest |
| 1.01 | OD61652/2026-2027:Drawing and painting with universal colorant to the anganawady/LPS class room walls
with
educational pictures such as numbers and alphabets and entertainment pictures to the
existing
painted surface including the cost of materials labor for sketching the pictures and
coloring and
finishing the pictures. | 24.7 | sqm | 2,200 ₹54,340 | 2,177 ₹53,771.9 Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,227
Closing Date
18 Aug 2026, 6:00 pmClosed
Sreejith G. Nair
Office of the Assistant Engineer, LID EW Section, Ranni-Perunad Grama Panchayat, Ranni- Perunad PO, Pathanamthitta PIN - 689711
Annual Plan-37/2026-27 RPGP-MAINTENANCE OF MADAMON NORTH ANGANAVADI BUILDING-General Civil Work
2026_LSGD_864076_3
02/ET/2026-27/AE/LIDEW/RPGP
Open Tender
Civil Works - Buildings
Item Rate
210 days
Ranni-Perunad Grama Panchayat
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,227
Yes
14 Sept 2026
6 Aug 2026
20 Aug 2026
6 Aug 2026
18 Aug 2026
6 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1DETAILED ESTIMATE | |||||
| 1.001 | OD56348/2026-2027:Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & ramp; shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 1 | sqm | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | OD56351/2026-2027:Supplying and fabricating PVC door with frame locally available best quality
materials, including cost of all fittings, labour charges etc. | - | each | - | - |
| 1.004 | 18.49.1:Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore | - | each | - | - |
| 1.005 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 1 | kg | - | - |
| 1.006 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1 | sqm | - | - |
| 1.007 | OD61652/2026-2027:Drawing and painting with universal colorant to the anganawady/LPS class room walls
with
educational pictures such as numbers and alphabets and entertainment pictures to the
existing
painted surface including the cost of materials labor for sketching the pictures and
coloring and
finishing the pictures. | 1 | sqm | - | - |
stage.html
html • 0.02 MB
finance_1462207.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tendernotice_2.pdf
PDF • 0.03 MB
Tendernotice_3.pdf
PDF • 0.03 MB
PAG.pdf
Other Document • 0.08 MB
sbd.pdf
Other Document • 1.73 MB
FOT.pdf
Other Document • 0.02 MB
AFFIDAVIT.pdf
Tender Documents • 0.06 MB
BOQ_1462207.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .