Construction of AUDA office Building at S.P. Ring Road, Ahmedabad (TPS 80_Bhat Sughad, FP 109/1 & 109/2) for Ahmedabad Urban Development Authority

Name of work: -Construction of AUDA office Building at S.P. Ring

Road, Ahmedabad (TPS 80_Bhat Sughad, FP 109/1 & 109/2) for

Ahmedabad Urban Development Authority

RECAPITULATION SHEET

Description Total Amount

Description Total Amount

1 ESTIMATE OF CIVIL WORK

2 ESTIMATE OF FURNITURE WORK

3 ESTIMATE OF ROAD

4 ESTIMATE OF UGS

5 ESTIMATE OF COMPOUND WALL

6 ESTIMATE OF SECURITY CABIN

ESTIMATE OF INTERNAL & EXTERNAL

7 PLUMBING, RAIN WATER, GARDEN

IRRIGATION AND PERCOLATION WELL

8 ESTIMATE OF FIRE FIGHTING SYSTEM

9 ESTIMATE OF AUDIO-VIDEO WORK

10 ESTIMATE OF ELECTRIFICATION

11 ESTIMATE OF HVAC

12 ESTIMATE OF LANDSCAPE

Name of work: -Construction of AUDA Building for Ahmedabad Urban Development Authority

Sr No Description QTY Unit Rate Amount

Sub Head - 1 - BUILDING CIVIL WORK

Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs,

1 sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of 0.71 Hectare 80,243.79

unserviceable materials(A) By manual means in area of light jungle

Caring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistent with I.S.I

specification. Using Chlordane and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration

Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 litre give

% concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Excavation for foundation by machineries / executed with mechanised efforts up to all depth

3 including sorting out and stacking of useful materials and disposing off the excavated stuff up to 70125.00 Cum 208.17

all lead and lift as directed by engineer in-charge.(A) loose or soft soli

Excavation for foundation executed with manual labour up to all depth including sorting out and

4 stacking of useful materials and disposing off the excavated stuff up to all lead and lift as 1125.00 Cum 117.08

directed by engineer in-charge. (A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

5 layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and 71250.00 Cum 130.39

Designing & Constructing cast in situ RCC diaphragm wall including guide wall with post

tensioned grouted anchors by providing and laying machine batched, machine mixed, self-

compacting, ready mix reinforced cement concrete, termite controlled, of M40 or higher grade

using minimum 450 kg. Cement per cu.mt. of concrete. including boring in all kinds of soils and

rocks, including working in or under water and / or liquid mud, in foul conditions and pumping or

bailing out of water and removing slush, including disposal of earth/ rock / slush etc. for all leads

and all lifts outside premises. Location for the disposal shall be selected by contractor owns

self. Excluding the cost of reinforcement (reinforcement bars shall be paid under relevant BOQ

items of work). For Diaphragm wall Water Stopper also Included in this item in between each

6 and Every concreting Panels. Contractor has to submit own design of diaphragm wall and post 3315.00 Cum 17,914.00

tensioned grouted anchors at 2 levels or more than 2 levels before starting work and get it

approved from Design Consultant & Proof Checking Consultant approved by Client. For design

mix and under water concreting, excess cement used will not be payable separately.

Constructing cast in situ RCC Guide wall by providing and laying machine batched, machine

mixed, self-compacting, ready mix reinforced cement concrete, termite controlled, of M15 or

higher grade using minimum 320 kg. cement per cu.mt. of concrete. including excavation in all

kinds of soils and rocks, including working in or under water and / or liquid mud, in foul

conditions and pumping or bailing out of water and removing slush, including disposal of earth/

rock / slush etc. for all leads and all lifts outside premises.

Providing and filling rubbles including hand packing and filling interstices with quarry spalls

behind abutments and between returns as directed

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete including cost of formwork in (A)

Foundation and Plinth

Providing and laying in position Ready Mixed M-30 grade concrete for reinforced cement

concrete work, using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all lead up to AUDA

site having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of

laying, including the cost of centring shuttering finishing and excluding the cost of reinforcement

including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength and durability including curing

etc. complete as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (Cement level 475 kg) for Foundation

Providing and laying in position Ready Mixed M-40 grade Concrete for reinforced cement

concrete work for all floors, using cement content as per approved Design Mix manufactured in

fully automatic batching plant and transported to site of work in transit mixer for all lead up to

AUDA site having continuous agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to

10 site of laying, including the cost of Ordinary Timber Planking form work for construction on RCC 2226.14 Cum 10,091.01

members and excluding the cost of reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability including curing, rendering, groove making

etc. complete as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (Cement level 494 kg) for column

Providing and laying in position Ready Mixed M-40 grade concrete for reinforced cement

concrete work for all floors, using cement content as per approved Design Mix manufactured in

fully automatic batching plant and transported to site of work in transit mixer for all lead up to

AUDA site having continuous agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to

11 site of laying, including the cost of Ordinary Timber Planking form work for construction on RCC 4255.02 Cum 9,660.75

members and excluding the cost of reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability including curing, rendering, groove making

etc. complete as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (Cement level 494 kg) for wall

Sr No Description QTY Unit Rate Amount

Providing and laying in position Ready Mixed M-40 grade concrete for reinforced cement

concrete work for all floors, using cement content as per approved Design Mix manufactured in

fully automatic batching plant and transported to site of work in transit mixer for all lead up to

AUDA site having continuous agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to

12 site of laying, including the cost of Ordinary Timber Planking form work for construction on RCC 2221.57 Cum 9,392.09

members and excluding the cost of reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability including curing, rendering, groove making

etc. complete as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (Cement level 494 kg) for Beam

Providing and laying in position Ready Mixed M-40 grade concrete for reinforced cement

concrete work for all floors, using cement content as per approved Design Mix manufactured in

fully automatic batching plant and transported to site of work in transit mixer for all lead up to

AUDA site having continuous agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to

13 site of laying, including the cost of Ordinary Timber Planking form work for construction on RCC 4694.49 Cum 9,571.87

members and excluding the cost of reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability including curing, rendering, groove making

etc. complete as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (Cement level 475 kg) for Slab

Providing and laying in position Ready Mixed M-30 grade concrete for reinforced cement

concrete work for all floors, using cement content as per approved Design Mix manufactured in

fully automatic batching plant and transported to site of work in transit mixer for all lead up to

AUDA site having continuous agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to

14 site of laying, including the cost of Ordinary Timber Planking form work for construction on RCC 164.90 Cum 7,859.92

members and excluding the cost of reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability including curing, rendering, groove making

etc. complete as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (Cement level 475 kg) for Staircase

Providing and laying controlled cement concrete M-250 and curing complete including the cost

15 of formwork and excluding the cost of reinforcement for reinforced concrete work for all floors in 203.63 Cum 7,738.72

Lintel and sill

Providing and laying controlled cement concrete M-250 and curing complete including the cost

16 of formwork and excluding the cost of reinforcement for reinforced concrete work for all floors in 94.28 Cum 6,472.26

Providing and laying controlled cement concrete M-200 and curing complete excluding the cost

of formwork and reinforcement for reinforced concrete work in Grid Slab/Road/Parking Floor.

Providing and laying cement concrete 1:1.5:3 (1- Cement : 1.5- Coarse sand : 3- crushed stone

18 aggregates 20 mm nominal size) and curing complete including cost of formwork and excluding 15.05 Cum 8,736.85

the cost of reinforcement for all floors in (A) Wall Caps / Coping (Building Parapet top)

Labour charges for laying R.C.C. floor of concrete (Trimix) to be concreted in alternate panels.

The panel shall be formed on four sides with M.S. channel bolted in position for forming the

size. The entire concrete mass shall be vibrated with skirt vibrator and needle vibrator so as to

bring out slurry on top and smooth finished integrally as per instruction of Engineer in charge

using vaccume de watering system as per Manufacturer's specification including applying "Nito

floor Hardtop" or equivalent (Fair create, sikka applied at the rate of 4.5 kg/10 Sq.m on R.C.C.

floor as per Manufacturer's specification) after base concrete has stiffened to the point when

light foot traffic leaves an imprint of about 3 mm. Any bleed water should have evaporated

including fixing expansion joints with 20 mm thick salitex board fitting, joint cutting, filling

bitumen, curing etc complete as per instruction of site Engineer. Excluding steel & including

form work with all tools, plants, Machinery and all cost of chemical required for Trimix concrete

including Groove Cutting 4 to 5 mm wide and 60mm Deep at every 4 m Distance.

Providing and fixing TMT Bar FE 500D reinforcement for R.C.C. work for all floor including

cutting, bending, binding and placing in position etc. complete

Applying and providing Expansion joint sealing System on 100 mm vide joint including cleaning

of expansion joint by mechanical means provision of adhesive and flexible membrane with

21 required bond length as per manufacturer specification and 4mm thick alluminium strip 972.54 Sqmt 4,772.00

covering with one side slotted and bolted with suitable system, inclusive of all manpower,

machinery and material as per specification and as directed.

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in basement - 2 in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Brick work using common burnt clay building bricks having crushing strength not less than

23 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) 86.71 Cum 4,295.99

Masonary work using Aerated light weight concrete block having crushing strength not less

than 35 kg/sqcm for super structure above plinth level upto all floor level with required chemical

(as approved by engineer in-charge) used for the bonding complete as per Technical

Providing 15mm thick cement plaster in a single coat on the Rough (Similar) side of single or

half brick/block/RCC walls for interior plastering for all floors and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement:4-sand), including fixing 150 mm wide galvanised Chicken wire

plaster mesh in mesh size 16mm x 16 mm and Maximum GI wire gauge of 24 fixed at every

RCC and Brickwork joint including labour and material, etc. complete as directed by engineer in-

Sr No Description QTY Unit Rate Amount

Providing 10mm thick cement plaster in single coat on ceiling for interior plastering for all floors

and finished even and smooth in (ii) Cement mortar 1:4 (1cement :4-sand)

Providing and applying textured plaster finish on exterior wall surfaces using approved high-

performance textured plaster material of specified grade, pattern, and shade. The surface shall

be thoroughly cleaned and prepared by removing dust, loose particles, and laitance, ensuring a

smooth and stable base. A suitable primer shall be applied before plastering. The textured

plaster shall then be applied using a trowel, roller, or spray method to achieve the desired

decorative finish such as rustic, swirl, drag, vertical, or any specified texture. The material shall

be UV-resistant, weatherproof, breathable, anti-fungal, and suitable for varying climatic

27 conditions. The final surface shall be uniform, crack-free, and visually consistent throughout. 7953.84 Sqm 1,466.52

The scope includes all necessary materials, tools, labour, scaffolding, curing (if applicable), and

cleaning of the site after completion. Work shall be carried out in accordance with details as per

drawing and the approved sample by architect and Make, and as directed by the

Architect/Engineer-in-Charge. Rate to include complete preparation, application, and finishing

of textured plaster on exterior walls in all respects.

Note: Including 20MM Mala Plaster consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) under texture.

Providing 20mm thick sand faced cement plaster on walls upto height 10 metres above ground

28 level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 2591.75 Sqm 300.66

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing 20 mm thick double coat mala cement plaster on exterior brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement :

4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing etc. complete.

Exposed Brick masonry with common burnt clay having crushing strength not less than

kg/sqcm of brick size & Shade As per Architect Selection in exposed brick work including

making horizontal and vertical grooves 10 mm wide 12 mm deep, complete in cement mortar

1:4 (1 cement : 4 coarse sand) with Ruled Pointing at all height including necessary material,

curing, labour, scaffolding, carriage charges etc. complete As per Architect detail drawings &

Selection. and also applying transparent, breathable, solvent-based silane/siloxane/silicone

water-repellent protective coating on exposed brick masonry surfaces, including thorough

cleaning of the surface, removal of dust, dirt, efflorescence and loose particles, preparation of

substrate as per manufacturer's recommendations, and application of minimum two coats by

brush, roller or low-pressure spray to achieve uniform penetration and coverage without altering

the natural appearance, texture or colour of the brickwork; complete with all materials, labour,

tools, scaffolding, surface preparation, protection of adjoining finishes, curing/drying as

required, and all incidental works, executed in accordance with the manufacturer's

specifications and engineer's instructions, complete in all respects.

Providing and applying Hydrophobic Silane - Siloxane (Silicone) coating of approved make, to

exposed concrete/ brick surfaces/ Dry Cladding surface at all heights & leads and wherever

instructed by Engineer-In-Charge. The treatment shall be in two coats wet-on-wet or as

recommended by approved manufacturer including preparation of surfaces by cleaning, curing,

protecting, independent double legged scaffolding etc complete. The rate includes the cost of

all materials, its application by specialized applicators by spray coating with airless sprayer,

cleaning the substrate of all laitance, construction dust, contaminants, double scaffolding,

labour etc., all complete and at all levels, leads and heights as per particular specification &

directions of engineer in charge. Guarantee Bond in the prescribed proforma shall be executed

by the contractor for the satisfactory performance of the application for 5 years.

Providing and applying of POP Punning upto average 12 mm thick to make surface smooth

and levelled and as directed by the Project Manager. POP powder of Gyproc Xpert (Gypsum

stucco plast of premium fine quality suitable for plastered walls and ceilings) or its equivalent

approved POP material as per the manufacturer`s detailed specifications etc. The rate shall

32 include providing of necessary staging/scaffolding, cleaning of floor from fall off POP material 11017.74 Sqm 694.38

shall be done by the Contractor. The job shall include hacking the existing surface for proper

bond and also include making groove as per drawings and directed by Project Manger.

(i) Surface treated area only shall be measured for payments. No extra payment shall be paid

for making groove.

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand

33 and manufacture on new wall surface to give an even shade including thoroughly brushing the 71591.86 Sqm 40.59

surface free from mortar dropping and other foreign matter and sand papered smooth.

Interior Paint:

Providing & laying of three coats with Royale luxury Emulsion paint of Asian Paint or equivalent

approved brand in shades and colour as directed on wall surfaces to give an even shade,

applying ready made acrylic base putty of "Altek" of "Wall Care" or equivalent as per

manufacturer specification fully to give a smooth and even surface before painting incl.

scaffolding to at any height with all labour and material after thoroughly brushing the surface &

making free from mortar droppings and other foreign matter including surface preparation etc.

34 Complete. Including cost of all type of tools, tackles, all labour, materials, transportation, 11017.74 Sqm 611.05

cleaning, at all floor, all level, all depth, all Height, all lead and lift, performance warranty

certificate etc. work complete as per the detailed drawing, approved sample, specifications and

instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. The substrate

must be sound, clean, dry, free from dust, oil, grease and laitance etc. All traces of release

agents must be removed. On chalky and dusty surfaces, all loose material must be removed by

stiff bristle brushing. The primer / paint application is to be done with the rollers. rate shall be

including crack filling and levelling as per manufacturers specification.

Sr No Description QTY Unit Rate Amount

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

35 required shape even shade after thoroughly brushing the surface to remove all dirt, and 60574.12 Sqm 114.53

remains of loose powdered materials. Etc complete

Providing and applying three coats of White/colour wash to any surface with lime wash

prepared from quick lime of best quality by adding blue/colour pigments and glue of approved

colour, quality in required quantities at all height and locations as directed including scaffolding,

cleaning and preparing surfaces for painting with broom, coir and sand paper if necessary etc.

complete as directed by Architect/Engineer-in-charge.

Duct/lift well/lift machine room walls/pump room walls

Providing and laying 16-18 mm (average) thick Polished Granite stone (Aadhunik Brown

Granite as approved by Architect) flooring & skirting in required design and patterns, in linear as

well as curvilinear portions of the building, all complete as per the architectural drawings, stone

37 slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid 18063.27 Sqm 3,101.76

and jointed with cement slurry and pointing with white cement slurry admixed with pigment of

matching shade, including rubbing, curing and polishing etc. all complete at all floor levels as

specified and as directed by the Engineer-in-Charge.

Providing and fixing 16-18 mm (average) thick Granite stone slab (Aadhunik Brown Granite or

Similar as approved by Architect) gang saw cut, mirror polished, remoulded and prepolished,

machine cut for kitchen / pantry / washbasin platforms, vanity counters, Riser, tread, dado,

window sills, shelf, facias i/c counters-lifts-door-window etc , door/window jambs, lintels and

similar locations of required size, approved shade, colour and texture laid over 20 mm thick

base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed

with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all floor levels.

[Note :- Double Moulding/Nosing and grooves wherever required is included in this item].

Providing and fixing pantry platform consisting of 20 mm thick mirror polished Granite

countertop with half bullnose edge moulding on exposed edges, laid over Kota stone base with

cement mortar layer in between forming a granite–mortar–Kota stone sandwich, including

providing and fixing 100mm high granite fascia patti at the front edge as per drawings, and Kota

stone vertical supports at the ends only, making required cut-outs for sink, faucet and other

plumbing fixtures, cutting, shaping and finishing edges of the openings, edge polishing, surface

finishing, proper alignment and levelling, complete as per approved drawings and directions of

the Engineer-in-Charge, including all materials, labour, tools and incidental works required to

complete the item in all respects.

Basin Counters:

Providing and fixing basin counter consisting of 20 mm thick mirror polished Granite countertop

with half bullnose edge moulding on exposed edges, laid over Kota stone base with cement

mortar layer in between forming a granite–mortar–Kota stone sandwich, including providing and

40 fixing 215 mm high granite fascia patti at the front edge, making required cut-outs for wash 58.59 Sqm 6,817.26

basin and faucet, cutting, shaping and finishing edges of the basin opening, edge polishing,

surface finishing, proper alignment and levelling, complete as per approved drawings and

directions of the Engineer-in-Charge, including all materials, labour, tools and incidental works

required to complete the item in all respects

Providing and laying Full body Vitrified tile of thickness 9mm and of approved make, brand,

shade & size with paper thin joint and to required slope, including providing & laying average

20mm thick cement mortar uniform bedding & a thick cement paste application in the plastic

state by using cement slurry, grouting of joints with colour pigments of Approved Make, curing,

protecting the tiles by covering with POP/ Jute for the same. The cost shall include providing

patterns, borders, inlays & Selected Epoxy etc complete with all materials, manpower,

transportation, leads & lifts at all levels and heights including all wastages etc as per

specifications and drawings, and as per the instructions of Engineer in Charge. Oxalic acid

washing to be done on the tiled areas before handing over. Wastages shall not be paid extra.

c) Dado in CM (1:3) of size 600mm x 1200mm

Providing & Laying in position ANTI SKID Full Body Vitrified Tiles in floor 600 mm x 1200 mm

size of thickness 9mm as per pattern shown in the drawing and as per specifications set in

cement slurry over cement mortar bedding in proportion 1:4 CM and laid to proper slope and

42 level. Finishing should be done with flush pointing in white cement or Selected Epoxy and 1419.85 Sqm 1,073.13

matching pigment with residue including curing, Grouting etc. The rate shall be inclusive of all

material + Tile, labour. machinery cost etc complete as per Drawing / Specification /as per

Architect & as directed by Project Manager

Urinal Partitions:

Providing and fixing Urinal Modesty Panels (UMP), E-Type, made out of laminated board

finished of approved make and thickness, suitable for use in toilet areas. The panel shall be

moisture-resistant, scratch-resistant, and easy to clean, with all exposed edges machine-

finished and sealed with matching edge band. The modesty panel shall be fixed between

43 urinals using SS 304 grade brackets, clamps, spacers, screws and fasteners, ensuring rigid 96.00 Nos 5,555.00

support, proper alignment, and adequate clearance from floor and wall as per manufacturer’s

recommendations. The work shall include cutting, drilling, edge finishing, fixing accessories,

alignment, levelling, and making good complete in all respects, as per drawings, specifications,

and directions of the Engineer-in-Charge. The rate shall include all materials, hardware, labour,

tools, accessories, taxes, duties, and incidentals, complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

44 platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary 96.00 Each 988.49

holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Sr No Description QTY Unit Rate Amount

Providing and laying colour glazed tiles 8 mm thick in skirting risers of steps and dado on

45 10mm thick cement plaster 1:3 (1-cement : 3- coarse sand) and jointed with white cement with 2800.00 Sqm 1,054.67

pigment added to match tile of any colour and any shade

Providing and laying Ceramic tiles 8mm thick in skirting risers of steps and Dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Single Leaf Flush Door with 18 mm approved Granite Frame as per detail drawing:

Providing & fixing in position 40 mm thick Wooden shutter & Stone door frame Flush Door &

with 1 mm thick laminate on both sides with 10 x 40mm lipping patti with Teak wood on all

edges having the surface finished with melamine inclusive of SS fixtures & fittings, such as

Stainless Steel Handle Back to back Fixing SS Grade-304 on both sides, tower bolts, mortise

locking arrangement, Concealed Cam efficient door closer, slide Track arm, Hold open, fire

47 rated, CE as per vendor details, Mortise Cylinder dead Lock case, 55 mm Back set, 24 mm For 492.61 Sqm 6,666.00

end profile Thumb Turn Cylinder with key operation, aluminum ventilation grill As per Drawings,

powder coated, Ball Bearing Butt Hinge, SS304, SSS, 4"X3"X3 MM -2BB, Square corner, with

timber door screw (926.32.160) with Glass Vision Panel having provision for access control

locking system as per client's requirement/Without Glass Vision Panel & as per architect's

detailed drg and design complete and as approved by Project Manager.

i) with glass vision panel

Single Leaf Flush Door with Stone Frame:

Providing & fixing in position 40 mm thick Wooden shutter & Stone door frame Flush Door &

with 1 mm thick laminate on both sides with 10 x 40mm lipping patti with Teak wood on all

edges having the surface finished with melamine inclusive of SS fixtures & fittings, such as

Stainless Steel Handle Back to back Fixing SS Grade-304 on both sides, tower bolts, mortise

locking arrangement, Concealed Cam efficient door closer, slide Track arm, Hold open, fire

48 rated, CE as per vendor details, Mortise Cylinder dead Lock case, 55 mm Back set, 24 mm For 323.89 Sqm 7,221.50

end profile Thumb Turn Cylinder with key operation, aluminum ventilation grill As per Drawings,

powder coated, Ball Bearing Butt Hinge, SS304, SSS, 4"X3"X3 MM -2BB, Square corner, with

timber door screw (926.32.160) with Glass Vision Panel having provision for access control

locking system as per client's requirement/Without Glass Vision Panel & as per architect's

detailed drg and design complete and as approved by Project Manager.

ii) without glass vision panel

FLUSH DOOR FOR TOILET STORE

Providing and fixing 35 mm thick flush door shutter for toilet store room made of approved

quality commercial/BWR grade plywood with internal solid core framework, finished on both

sides with 1.0 mm thick decorative laminate of approved make, shade and texture. The door

shall be provided with ventilation arrangement in the form of fixed louvers/ventilator panel at top

portion to facilitate air circulation inside the store room. The item shall include providing and

fixing seasoned hardwood/approved wood frame of required section, SS butt hinges, SS

handles, tower bolt, magnetic stopper, lockset, screws and all necessary hardware complete.

Exposed edges of plywood shall be finished with matching laminate edge band/polished

hardwood lipping. The work shall include cutting, fitting, fixing, making good adjoining surfaces

and all labour, materials, transportation and incidental charges complete as per site

requirements and instructions of the Engineer-in-Charge.

Providing and Fixing of Fire rated Doors Constructed from min. 1.25mm to 1.6mm thick

(galvanized steel sheet with minimum 40 micron DFT formed to provide a 46mm thick fully

flush, double skin door shell with lock seam joints at stile edges). Internal Reinforcements must

be provided at top, Bottom and Stile Edges for Fire Rating. The internal construction of the door

is a specially designed Honey Comb, Mineral wool, Polyurethane etc. as per requirement

structure with reinforcements at top, bottom and side surrounds. The total assembly of door

including frame, shutter and hardware: (Ball bearing butt hinge, SS304, of size 100 x 75 x 3mm

with screw in SSS-Geze Make, 6 mm Thick Two Hours Fire Rated Glass (200x 300mm) Schott

Pyran, Single Point Panic Bar – Geze/Horman Make, External Trim bar (panic latch) With

locking attachment Silver Finish – Geze/Horman Make, Door closer, TS1000c, with standard

arm, Silver finish-Geze/horman, Chemical Anchor Fastener 10 x 100mm Hilti, Hole Plug Cap,

Smoke Seal 10x4mm, fire rated 8mm vision panel wired glass 200x300 pilkington/schott make,

Rock wool (96kg/m3) shall be min. 2 hours of fire rating. The door frame shall be 1.6 mm thick

galvanized steel sheet formed to double rebate profile of size 143mm X 57 mm without grooved

frame/125mm X 60mm/143mm X 58 mm with grooved frame fire rated EPDM seal in grooved

(+/- 0.3mm) with a maximum bending radius of 1.4mm. The door frames may be built into the

brick or block walls using corrugated “TEE” Anchors not welded to the frame (first fix). Frames

may also be fixed on plastered openings with the help of Metallic Expansion Shield with counter

sunk screw (second fix). Door Frames are supplied to knock-down form with butt joints for

bolted assembly at site. Item includes filling door frames with cement mortar. Item includes

filling gap between door frame and jamb/sill/wall/header gap with fire proof silicon material.

Paint system for Fire door / Shutter, Surface preparation : Solvent cleaning / Mechanical power

tooling, Powder Coating : Pure Polyester : min. 70 - 90 micron. Product shall be certified

according to Qualicoat class 1 and has weathering performance in line with AAMA 2603. For

vision panels the glass of Pilkington/Pyran s (by schott UK) make used shall have fire rating for

same period as the door as per drawing & specification etc. as complete as directed by

Engineer In charge. The testing of the door shall be as per BS 476 Part 20 & 24, IS 3614 Part

and ISO 834. Also it shall confer to TO IS 3614 (PART 2) 1992 BS476 (PART 20 & 22) AND

ISO834 MATERIAL. Sizes of the doors shall be pre-measured based on actual opening size at

site before ordering. All the doors shall pre-approved by clients QA & QC before dispatch at

ii) Double Shutter Fire Rated Door

Sr No Description QTY Unit Rate Amount

GLAZED FIRE DOOR WITH GLAZED PARTITION

Supply and installation of Fire Rated Glazed Door with Partitions in pressed Galvanized Steel

(IS 277), tested as per IS 16947:2018 with E120 (120 min) fire rating and EI 30 (30 min)

insulation as per ISO 834-1/ISO 3009. Frame profile 50x60mm (top) & 35x60mm (vertical),

shutter profile 60x60mm (top/side) & 110x60mm (bottom), fabricated from minimum 1.6mm (16

51 gauge) GI sheet with fire-rated EPDM gaskets/smoke seals, mineral wool infill (96 kg/m³ 37.80 Sqm 53,328.00

density), intumescent seal (10x2mm) all around, and integral astragals for pair of doors.

Glazing with 12mm fire rated toughened glass (EW 120, EI 20), 86% light transmission, 38dB

sound reduction, UL-TUV certified, EN 12600 Class 1(B) impact resistant. Finish: Polyester

powder coating 70-90 microns. Complete with hardware, fixing accessories, and installation as

per manufacturer specification.

Stile Glass Door:

Single leaf Double Glazed Stile 75 Shutter with Door Frame Supply & Installation of

Modular Aluminium Door frame of Otic make 10 0mm System Using Fix & Pettam ( 100mm x

35mm) as Doorframe Door Frame Dimension – 100mm x 35mm. Using Stile Shutter

50mm) as StileShutter Door Shutter Dimension – 75mm x 50mm. Finish –

6mm thk + 6mm thk clear toughened Glass Hardware List:Flush Hinges Concealed

Door close with Hold Open unit Dead Lock with Cylinder Offset D Handle 450 X 25mm Drop

Down Seal Door Stoper AllHardwarewillbe Black Finish

Sliding & Fixed Window

Providing, fabricating and installing premium quality powder-coated aluminium Fixed & Sliding

Window system up to 3.0 m height, using approved heavy-duty aluminium sections (Metalex

MT-Max Minimal Sliding System / Zindal or equivalent approved make), comprising

combination of fixed shutters and sliding shutters as per approved drawings and window size.

Window configuration shall be 2-track / multi-track system with 2, 3, 4 or 5 shutters as required.

Aluminium frame depth approximately/similar to 134.5 mm with slim interlocking sightline of

about 18 mm, capable of accommodating 8 mm to 34 mm thick toughened / laminated / DGU

glass as specified. Sliding shutters shall be fitted with SS304 high-speed rollers, stainless steel

53 accessories, locking arrangement, EPDM gaskets, wool pile, drainage system and all 1951.45 Sqm 19,486.94

necessary hardware for smooth, silent and weather-resistant operation. The system shall be

designed for large openings with shutter load capacity up to 250 kg per pair and maximum

shutter height up to 6000 mm as per manufacturer’s specifications. Contractor shall submit

detailed shop drawings, technical data sheets, colour samples and a physical mock-up/sample

of the proposed window system for review and approval by the Architect/Consultant before

procurement and execution. Only the make, section profile, finish and system approved by the

Architect/Consultant shall be used for the work. Work shall include all labour, materials, fixing

accessories, sealant, alignment, testing and commissioning complete as directed by Engineer-

SIGNLE SIDE OPENABLE WINDOW

Providing, fabricating and installing premium quality powder-coated aluminium openable

window system (side hung/top hung) of approved make (Metalex, Zindal or equivalent

approved make), using heavy-duty aluminium sections with finish, colour and appearance

matching the approved sliding window system of the project, complete with fixed or openable

shutters as per approved drawings, suitable for 8 mm to 10 mm thick

toughened/laminated/DGU glass, including SS304 hinges, locking system, handles, EPDM

gaskets, weather seals, all necessary hardware, fixing accessories, sealant, fabrication,

glazing, installation, testing and commissioning complete as directed by the Engineer-in-Charge

and approved by the Architect/Consultant.

Fixed Facade (Curtain wall system)/Duct Covering

Design, Engineering, Fabrication, Supply, Installation, Testing, Protection, Cleaning and

Handover of the Technical Geode ML series Unitized Glazing Curtain Wall System, including all

associated accessories, sealants, gaskets, flashings, brackets, fasteners, and protection

works, complete in accordance with approved drawings, BOQ, technical specifications and

performance requirements. The system shall be of Male- Female unitized construction with

prefabricated units installed floor by floor onto the main structure, designed for 2 kPa wind load

and proof load equal to 1.5 times design load. Profiles shall be designed either as closed box

sections or with anti-buckling clips to minimize lateral torsional buckling. The system shall be

thermal break. Edge guards shall be extruded from rigid PVC material, designed as snap-fit

components without the use of screws. Screws shall be permitted only for fixing glass support

blocks, which shall be manufactured from aluminium alloy 6063-T6 or 6005-T6. Mid transoms

shall incorporate a screw-port design on their face, eliminating the need to puncture the

transom to fix the edge guard or to fix BMU restraint pins. Gutter sleeves shall be designed to

lock both legs of the gutter transom to ensure structural integrity and watertight performance.

Glass type, thickness, and build-up shall be as per approved architectural drawings. <Glass

55 specification to be confirmed: DGU / Laminated / Toughened / Heat-strengthened, etc.> Vision 617.27 Sqm 24,492.50

panels and spandrel panels shall be designed to achieve uniform aesthetics across the

elevation. Since the glass is supported only along vertical edges through toggles and carriers, it

shall be considered as a one-way spanning element for design purposes, with glass thickness

derived in accordance with ASTM E1300 / IS 16231 (Part 3) / EN 16612 for the designed wind

load. Extruded aluminium sections shall only conform to Alloy 6063 T6 ( Virgin Aluminium), with

minimum structural wall thickness of 2.0 mm. All visible aluminium surfaces shall have Super

durable Powder coating (25 yr)/ Durable Powder coating (15 Yr)minimum 60 to 90 microns,

conforming to AAMA 2605. Non-visible aluminium surfaces shall be chromicized for corrosion

protection. All gaskets shall be EPDM, Only micro cured (online curing) with Shore A hardness

between 70-80 as per application. Edge guards shall be Thermal Break, designed as snap-fit

components without screws. Structural and weather sealants shall be silicone-based,

compatible with adjacent substrates, and approved by the Consultant. Backer rods shall be of

closed-cell polyethylene. Brackets shall be manufactured from Mild Steel (MS) with a minimum

yield strength of 240 MPa. All brackets shall be Hot-Dip Galvanized (HDG) to a minimum

coating thickness of 85–100 microns, in accordance with IS 4759 / EN ISO 1461. After

fabrication, brackets shall be fully galvanized, ensuring edges, welds, and cut surfaces are

Sr No Description QTY Unit Rate Amount

Facade / Glass Railing

Providing and Fixing glass railing system with aluminium profile with 101mm x 57mm x 2mm

thk. With addition profile size 53 x 10 x 2mm thk. And 57 x 18 x 1.3mm thk. All aluminium profile

to be fix to floor using Fischer or rawl make anchor, 11.52mm thk. laminated toughened clear

glass to be use to all railings, all profile joints to be 90 degree cut and metered joint as per

instructions by engineer on site or site in charge.

Providing and fixing M.S. plain grills of required pattern to M.S. flats of windows etc. with M.S.

flats at required spacing and frame round, square or round bar, with round headed bolts and

57 nuts or by screws plain grill with one coat of red lead paint & two coats on new steel and other 2000.00 Kg 106.07

metal surface with enamel paint, brushing, interior to give an even shade including cleaning the

surface an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Supply, fabrication, and fixing of Exterior Wall Cladding System using Quadrate (Square edge)

Box type panels, in Galvanized Steel, of size 150mm (Depth) x 50mm (Width), in lengths up to

4.0 meter, formed out of 0.65mm thick (TCT) Galvanized Steel sheet, fixed with a uniform gap

of 75mm between two adjacent panels, as per approved drawings and manufacturer's

specifications. All panel surfaces shall be powder coated with special exterior grade

SUPERCOTE powder coating to enhance fade resistance and weather durability, in approved

shade/colour as selected by the Architect/Client. Panels shall be supported on Galvanized

Steel L-Angle carriers of size 40mm x 40mm, 1.2mm thickness, 3000mm length, powder

coated in the same colour as the panels, fixed horizontally on the supporting structure at

intervals of 1.20m to 1.50m center to center as required. Each panel shall be individually fixed

onto the L-Angle carrier using self-drilling/self-tapping screws, maintaining the specified gap

between panels, ensuring true, plumb, and level alignment as per approved elevation

drawings. The L-Angle carrier system shall be fixed onto rigid MS (Mild Steel) framing, which

shall be provided and installed by the Client separately; this item covers supply and fixing of

cladding panels, L-angle carriers, and fixing accessories only. Rate shall be inclusive of all

materials, fabrication, transportation, hoisting, cutting, fixing, wastage, and finishing required to

provide a complete finished exterior cladding system, complete in all respects as per approved

shop drawings and specifications.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position

and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters,

59 purlins connected to common rafters and the like, with two coats of paint on new steel and 3185.60 Kg 91.16

other metal surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleaning the surface of all dirt, dust and other

foreign matter.

Providing and laying SYNROOF HI-BUILD or equivalent, 2 mm thick elastomeric, premium

quality acrylic coating waterproofing membrane finished which consist of Bitumen primer and

60 80 GSM membrane with ultra violet resistance and working up to any height with the 5 years of 10645.91 Sqm 871.02

guaranty against any leakage etc. complete as per detail specification and as directed by

Engineer-In-Charge

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

stone aggregate 20mm nominal size) laid in one layer, 40 mm thick and finished with a floating

coat of neat cement including mixing water proofing materials in cement mortar in proportion

recommended by the manufacturer as approved and directed by engineer in-charge.

Filling in sunken portion with broken AAC Block including watering, ramming, and consolidation

etc completed as per engineer-in-charge.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat

cement finishing, watering etc. complete.

Providing and laying integrated cement based water proofing treatment of required thickness

over the roof including 10mm thick waterproofing cement plaster in cement mortar1:3 and

slopping out terrace slabs with following specification laid to required slope not flatter than 1:80

(the thickness of water proofing treatment near rainwater outlet or the lowest point of the

finished slope shall not be less than 65mm, including treating the vertical surface of the parapet

wall up to 20cms. height above finished level of terracing including finishing the top with joint

less water proofing plaster, curing, testing etc. complete. Rate is including ten years

performance of guarantee bond to be given on stamp paper. (No extra shall be paid for

increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed

with properly water proofing compound conforming to IS -2645 and 10 mm thick water proofing

cement plaster in Cement mortar 1:3 over the R.C.C. slab incl. cleaning the surface before

64 (B) Laying cement concrete using broken brick bats 75mm size with 50% of cement mortar 1:4 3831.74 Sqm 321.27

(1cement:4 coarse sand) over 10mm thick water proofing cement plaster in cement mortar 1:3

(1 cement, 3 coarse sand) admixed with proprietary water proofing compound conforming to IS

2645 to required slope and treating similarly the adjoining walls up to 200mm height incl.

rounding of junction of walls.

(C) After Two Days of proper curing applying a second floor of cement slurry

(D) The surface 10mm thick joint less cement plaster of mix 1:3(1 cement :3 coarse sand

)admixed with proprietary water proofing compound conforming to IS :2645 and finally finishing

the surface with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing for final taste

All above operation to be done in order and as directed and specified by the Engineer In

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 10-20 mm) with SRI

(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof

and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1

cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in

ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including

providing skirting up to 200 mm height along the parapet walls in the same manner.

Sr No Description QTY Unit Rate Amount

Providing and Fixing 3-4 mm thick FRP corrugated roofing sheet fixed with galvanized iron J or

L Hooks, Bolts, and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding the cost of purlins, Rafters, and Trusses. FRP

sheet as approved and directed by the engineer in charge.

Providing & fixing of ""T-Line"" Toilet cubical system. Made out of 12mm compact grade

laminate (both side) in select colours approved by the Arch. / Eng. Front panel, door & divider

panel to be fixed vertically by using S.S. finish aluminum anodized profiles. The intermediate

panel is one continuous panel without any joints fix to the wall & front panel by using aluminum

anodized (SS finish) ""U"" profile, as per the required size Max depth – 1200mm OR 1500mm,

door width - 600 mm (for handicap toilet 900mm)and front panel should be cut & fixed as per

the require measurement. Maximum width of the front panel including door will be 1200mm (for

handicap toilet 1600mm) centre to centre for each cubical. Total height of the cubicle including

100mm leg & 50mm top rail should be 1950mm. All pilasters are to be supported by adjustable

foot of 100mm height. Top rail & wall side fixing with aluminum S.S. finish anodized profile.

(Size of cubicle Height 1950mm, depth 1200mm OR 1500mm, width 1200mm). Each cubical

should be equipped with S. S.

Hardware and Fixing

(a) Privacy thumb turn,

(e) 2 Adjustable Leg.

Technical Specification:

Overall Dimension: 1200mm (w) *1500mm (d) *1950mm (h)

Partition: Type of Material – Phenon Compact Sheet (HPL)

Cubicle Depth: Depth will be maximum 1500mm

Door Width: Width of the door will be 600mm

Door Hinges – Door Hinges will be of Stainless Steel SS – 304 Auto return

type with PVC barring.

Support Leg – Support Leg will be of Stainless Steel SS – 304 with Height

Door Lock – Door Lock will be with vacant indicator made of Stainless

Cloth Hanger – It will be of Stainless Steel SS –

Head Rail – Head Rail will be of Aluminum Anodized section.

H & U Profile – Channel will be in Aluminum Anodized section.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm

braced with flat iron diagonals 20x5 mm size with top & bottom rails of T-iron 40x40x6 mm with

68 38 mm dia. Steel pulleys complete with bolts , nuts , locking arrangement , stoppers , handles 33.15 Quintal 5,620.76

including applying a priming coat of red lead paint & two coats of enamel paint of selected

shade & approved make.

SOFTSCAPE & HARDSCAPE WATERPROOFING: 1.1 Surface preparation, opening the

cracks & construction joints in “V” groove manner of 25 × 20 mm size and filling the same with

polymer modified mortar using BRONCO CEMGROUT 60 or equivalent. Making roundel over

slab & wall joints with cement-sand mortar admixed with acrylic polymer @ 5% by weight of

1.2 Providing & applying one coat epoxy primer using BRONCO ULTRASHIELD PRIMER or

equivalent over the prepared surface.

1.3 Providing & applying two coats of BRONCO ULTRASHIELD PU or equivalent, highly

elastomeric, single-component pure polyurethane waterproofing coating over the primed

surface, including treatment of corners, junctions, penetrations and other critical areas as per

manufacturer's recommendations.

1.4 Providing & laying non-woven geotextile fabric, 120 GSM, over the waterproofing treatment

as protective layer.

1.5 – ROOT BARRIER: Providing & laying root-resistant HDPE/LDPE root barrier membrane,

minimum 500 micron thick or as recommended by the manufacturer, over the protected

waterproofing layer, with all joints properly overlapped and sealed/welded to form a continuous

69 root-resistant barrier. The membrane shall be resistant to root penetration, moisture and 2271.96 Sqmt 1,776.49

chemicals and shall be suitable for green roof/landscape applications, including complete

treatment at upstands, corners, penetrations and tree/planting zones, all complete as per

manufacturer's specifications and Architect/EIC approval.

1.6 Laying a layer of average 75 mm thick protective M20 grade screed concrete, laid to

required slope towards drainage outlets as per specification, admixed with integral

waterproofing compound BRONCO CEMKRETE LW@ 200 or equivalent ml per bag of

cement, including all necessary finishing and curing.

1.7 Laying protective waterproof cement plaster in 1:4 cement-sand mortar, admixed with

integral waterproofing compound BRONCO CEMKRETE LW @ 200 ml or equivalent per bag

of cement, including all necessary preparation, finishing and curing.

1.8 Providing & laying 20 mm thick hydro drain board over the waterproof protective screed

prior to backfilling, along with non-woven geotextile fabric, 200 GSM, to act as drainage and

filtration layer and allow free flow of subsurface water ingress towards designated drainage

Providing material and labour for fixing Rubber Corner Guards of approved make for Concrete

Pillars in Basement Parking of size 825 x 65 x 65 x 6 mm with retro reflective tape marking in

yellow colour. Corner guard shall be fixed with SS 304 grade fastener as per manufacturer's

specification etc complete as directed by Engineer in charge

Providing material and labour for fixing 600mm dia Convex mirror made out of ABS/ PC plastic

71 of approved make having viewing distance of 6.0 Mt. fixed on wall atm basement ramp as per 20.00 Each 2,140.58

standard and as directed by Engineer in charge.

Supplying and fixing cat eye (Stim Sonite) made out from Acrilo beautile sterine injuction high

72 compressed moulding with reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) 550.00 Each 217.40

provided with bituminous adhesive 100g. with each unit for fixing. (High Intensity grade)

Sr No Description QTY Unit Rate Amount

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux

and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

Providing and Fixing ABS Plastic SPEED BUMP of Size :‐ 750 MM x 250MM x75 MM, Per Mtr #

74 4 Nos (2 black, 2 yellow),TOP DESIGN – LINE DESIGN ANTI SKID PATTERN FOR GRIP 48.00 Rmt 1,701.67

filling CEMENT INSIDE etc. complete as directed by Engineer‐in‐charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc. including welding, grinding, buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing,

canopy, grill etc. complete as directed with necessary accessories & stainless steel dash

fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist

slab with suitable arrangement for all floors as per approval of Engineer-in-charge.

Providing and supplying Medium duty injection adhesive of Hilti - HY200 R or equivalent for

rebar fixing in Dry conditions for below specified dia. Drilling hole to the required depth by rotary

hammer drill, cleaning with brush and jet of clean air, filling resin and hardener with standard

dispenser in hole and then fixing the re-bar, The system should be made of two foils consisting

of resin and Hardener foil pack. The installation and the setting instructions should be strictly

followed as per the manufacturers Recommendations. Rate shall be inclusive of scaffolding

and for all places and all heights etc. and work shall be carried out as per direction of engineer

in charge. Reinforcements shall be paid in relevant tender item. (Pull out testing up to 1% of

total rebar is to be produced by manufacturer)

a) 8 mm dia bar

Providing and supplying Medium duty injection adhesive of Hilti - HY200 R or equivalent for

rebar fixing in Dry conditions for below specified dia. Drilling hole to the required depth by rotary

hammer drill, cleaning with brush and jet of clean air, filling resin and hardener with standard

dispenser in hole and then fixing the re-bar, The system should be made of two foils consisting

of resin and Hardener foil pack. The installation and the setting instructions should be strictly

followed as per the manufacturers Recommendations. Rate shall be inclusive of scaffolding

and for all places and all heights etc. and work shall be carried out as per direction of engineer

in charge. Reinforcements shall be paid in relevant tender item. (Pull out testing up to 1% of

total rebar is to be produced by manufacturer)

b) 10 mm dia bar

Providing and supplying Medium duty injection adhesive of Hilti - HY200 R or equivalent for

rebar fixing in Dry conditions for below specified dia. Drilling hole to the required depth by rotary

hammer drill, cleaning with brush and jet of clean air, filling resin and hardener with standard

dispenser in hole and then fixing the re-bar, The system should be made of two foils consisting

of resin and Hardener foil pack. The installation and the setting instructions should be strictly

followed as per the manufacturers Recommendations. Rate shall be inclusive of scaffolding

and for all places and all heights etc. and work shall be carried out as per direction of engineer

in charge. Reinforcements shall be paid in relevant tender item. (Pull out testing up to 1% of

total rebar is to be produced by manufacturer)

c) 12-16 mm dia bar

Providing and supplying Medium duty injection adhesive of Hilti - HY200 R or equivalent for

rebar fixing in Dry conditions for below specified dia. Drilling hole to the required depth by rotary

hammer drill, cleaning with brush and jet of clean air, filling resin and hardener with standard

dispenser in hole and then fixing the re-bar, The system should be made of two foils consisting

of resin and Hardener foil pack. The installation and the setting instructions should be strictly

followed as per the manufacturers Recommendations. Rate shall be inclusive of scaffolding

and for all places and all heights etc. and work shall be carried out as per direction of engineer

in charge. Reinforcements shall be paid in relevant tender item. (Pull out testing up to 1% of

total rebar is to be produced by manufacturer)

d) 20 mm dia bar

Providing and fixing of Automatic Sliding 12mm thick clear toughened glass door of approved

make fixed with DORMA (ES 200 easy)/OZONE operator or equivalent approved complete in

all respect as per approved shop drawing. The operator mechanism should meet the standards

and guidelines for power operated doors or gates. Operator length should be 4570 mm full

system type A and with a clear opening of 1982 mm and clear passage height of 2135 mm

including micro processor controlled drive unit, with self learning mechanism, program selector

with knob, motion detector (eagle 6 radars, 02 no's), mechanical components, toothed belt,

cover profile, floor guide for frame less glass, glass clamping rail, safety device- light barrier,

electromechanical lock, body finish: standard silver anodised as approved by the Engineer-in-

Providing and pasting 2mm thick matte finished PVC Glass film in required sizes of frosted

81 shade of Garware or equivalent make from reputed manufacturer including wastage etc. 1260.00 Sqmt 491.95

complete as per direction of Engineer-in-Charge.

Providing and fixing UV Stabilized Anti Bird Net -Pigeon Net, 25mm Hole Size, including Corner

82 Ropes (tie member), necessary Kit, Clip, fixture and fastening etc. complete as directed by 634.66 Sqmt 1,044.19

engineer in-charge. (Material: Nylon)

Mirror: Providing and Fixing Vanity Mirror with 19mm Thick Marine Grade Ply Confirming to (

IS‐710), fix on the wall, Apply Black Japan Paint on Back Side of Ply with Saint Gobain or

equivalent make 6mm Mirror with Silicon adhesive at all level & Height etc. Completed as per

detail drawing & Specification and approved by Architect or EIC.

Sr No Description QTY Unit Rate Amount

Supply and Fixing 950 x 950 x 75mm, Internal Diamer 600mm of Concrete Tree Guards in shot

blasted Finish and colour as approved by the Architect.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm

85 distance from wall of standard shape with bracket of the same materials with snap fittings of 60.00 Each 170.03

approved quality and colour, weighing not less than 105 gms.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden

plugs with C.P. brass scews.(B) 600mm x 20mm size.

Directory signage

87 Design, composition, supply & installation of Digitally printed vinyl (3M 1220 Series) on HP latex 125550.00 Sq inch 4.00

printer pasted reverse side on 6mm thick Acrylic sheet (1) Hanging with SS Chain (Approx. 2ft.)

Directory signage

Design, composition, supply & installation of Digitally printed vinyl (3M 1220 Series) on HP latex

printer pasted reverse side on 6mm thick Acrylic sheet (2) Mounted on wall with 1in. SS Mirror

Design, composition, supply & installation of 1 mm thick SS plate of size 150x150mm with

digitally printed 3M vinyl on HP latex printer pasted on reverse side and fixing with 1 inch. SS

90 Design, composition, supply & installation of 5 mm thickacrylic plate with digitally printed 3M 12028.00 Sq inch 4.22

vinyl on HP latex printer pasted on reverse side and fixing with 1 inch. SS Studs.

Changeable name plate with printing :

Design, composition, supply & installation of 3 mm thick clear acrylic sheet with reverse side

91 vinyl printing with suitable sliding arrangement. 16042.50 Sq inch 7.95

Note : 3mm clear acrylic sheet bended from top & bottom will be fix on wall, 2mm clear sheet

with printed vinyl pasted on it will insert & will be changeable.

Informatry Kiosk

Design, Composition, Supply & Installation of Panel Type a-Si TFT-LCD, Panel, Panel Size

inch, Resolution 3840(RGB)-2160, UHD, Display mode Super MVA, Normally Black, Trans

missive [[Pane look copyright, copy is strictly prohibited] IPS Family: AAS, ADS, AHVA, FFS,

IPS, New Mode2, PLS, SFT, Vista rich VA Family: ASV, HVA, MVA, PVA, SVA, UV2A, VAJ,

Surface Anti-Glare ( Haze 1%), Hard coating (3H) Brightness 400 cd/m2 (Typ.), Contrast Ratio

5000:1 (Typ.), Display Colors 1.078 (8-bit Hi-FRC), Response Time 6.5 (Typ.)(G to G), Viewing

Angle 88/88/88/88 (Typ.)(CR220) (L/R/U/D), Frequency 120Hz [[Panelook copyright, copy is

strictly prohibited] 120Hz (60HZ Input): Embedded MEMC Circuit 120Hz+120Hz: 120Hz

Panel+120Hz Backlight 240Hz (60HZ Input): Embedded MEMC Circuit), Lamp Type WLED

18S6P: 8 Serial, 6 Parallel), Signal Interface V-by-One 16 lane, Input Voltage 12.0 V (Typ),

Accessories: Wheel

Floor Directory

Design, Composition, Supply & Installation of Changeable Doctor's Name Plate

1st Layer: 3min ACP sheet

2nd Layer: Pieces of 3mm Acrylic Sheet with vinyl print ( Doctor's Name)

3rd Layer: Router cut 3mm ACP sheet 4 th

Layer: 5mm Transparent acrylic sheet entire signage will be fix on wall using SS studs

External direction signages:

Design, Composition, Supply & Installation of double sided non-lit External Multi Directional

Signage, structural steel frame made out of medium duty, 40mm x 40mm 3 mm square pipe

section including red oxide primer with two coal of smoke grey shade epoxy painting, fixing to

existing on existing SS pipe through anchor bolt, providing & fixing ACP Sheet 3mm in

cladding, 3M Vinyl of background with High Intensity Prismatic (HIP) reflective sheet, self-

adhesive graphics with 3M Scotchcal and mounting with 3M double sided VHB Tape etc.

complete as per drawing and specification.

Design, Composition, Supply & Installation of single sided non-lit External Block name Signage

structural steel frame made out of medium duly 40x40x3mm box section, red oxide primer with

two coat of synthetic enamel painting, fixing of signages on existing structure through anchor

95 bolt or anchor fastener, providing & fixing ACP Sheet 3mm in cladding, 3M (3630/3650 series) 96.84 Sq ft 722.15

Vinyl of background with High Intensity Prismatic (HIP) reflective sheet, self- adhesive graphics

with 3M Scotchcal and mounting with 3M approved tensioning system etc. complete as per

drawing and specification.

Providing and fixing Sculpture made out of desired material as directed by Architect and as per

approved sample. Sculpture shall be fixed with required civil work as per site condition. Rate

shall be for sculpture and all activity required for installation of sculpture. (Basic rate of one

sculpture - 1,00,000)

Providing and fixing Sculpture madeout of desired material as directed by Architect and as per

approved sample. Scalpture shall be fixed with required civil work as per site condition. Rate

shall be for sculpture and all activity required for installation of sculpture. (Basic rate of one

sculpture - 5,00,000)

Designing, Providing and fixing Wall Mural on given Wall, Mural made out of desired material

as directed by Architect and as per approved sample. Wall Mural shall be fixed with required

civil work as per site condition. Rate shall be for Wall Mural and all activity required for

installation of Wall Mural.

Providing and fixing Automatic Boom Barrier - 4 Meter | High Torque Motor, Ip54 Protection,

Optical Beam Sensor, Auto-close Feature, Housing Dimensions (Approx mm) 4 Meter : 260 x

270 x 1007, Boom Dimension (mm) 4 Meter : 60 x 40, Controller Protecting Rating IP54,

Control Panel Power Supply (V) 230 A.C.50/60Hz, Motor Power Supply (V) 24 D.C, Power (W)

300, Current Draw (A)1.5, Torque (Nm) 4 Meter : 200, Opening Time (Sec) 4 Meter : 2 to

Duty Cycle, Operating Temp. (C) -20 to +55 etc. complete as directed by engineer in-charge.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed.

Sr No Description QTY Unit Rate Amount

ARTIFICIAL GRASS

Providing and laying UV-stabilized artificial/synthetic turf grass of approved make, colour

(natural green with brown thatch blend) and pile height 30–35 mm, tufted on

polypropylene/polyethylene monofilament yarn with latex/polyurethane backing and permeable

drainage holes, having minimum density 16,000–20,000 tufts/sqm, laid over the existing

finished, waterproofed and screeded terrace/podium deck surface after cleaning the surface of

debris, sharp projections and ponding without disturbing the existing waterproofing membrane,

including providing a protective underlay/shock pad or geotextile separation layer over the

waterproofed surface for cushioning and drainage, rolling out the turf rolls in a uniform pile

101 direction, cutting and fitting neatly around table and chair bases, glass railing posts, drainage 186.60 sqmt 1,610.95

outlets, expansion joints and terrace parapets/edges, jointing adjacent rolls with jointing tape

and adhesive to form seamless, gap-free joints, fixing the perimeter with adhesive bonding

and/or a low-profile mechanical edge trim without penetrating the terrace waterproofing, infilling

with silica sand at 2–4 kg/sqm brushed into the pile for ballast and drainage while keeping

existing rainwater outlets/scuppers clear and functional, and power-brushing/grooming the

entire laid area to achieve a natural, uniform standing-pile finish with unobstructed free flow of

rainwater to the terrace drains, complete with all materials, labour, tools and plant, and testing

for proper fixing, drainage and finish — complete as required, for terrace landscaping/amenity

Providing and fixing galvanized iron railing made of hollow tubes, channels, plates etc. of

required size and section, hot-dip galvanized as per IS 4759/IS 2629 with minimum zinc coating

of 85 microns, including welding, grinding, and finishing of all joints, making curvature wherever

required, and thereafter applying electrostatic powder coating of approved make, colour and

shade (minimum 60–80 microns dry film thickness) over a chromate/phosphate pre-treatment

102 to the entire fabricated railing after fabrication, including touch-up galvanizing/zinc-rich primer at 1093.40 Rmt 6,666.00

weld locations prior to powder coating to restore corrosion protection, and fitting the same with

necessary G.I./stainless steel nuts and bolts complete including fixing the railing, canopy, grill

etc. complete as directed with necessary accessories and G.I./stainless steel dash fasteners,

bolts etc. of required size, on the top of the floor or the side of the waist slab with suitable

arrangement for all floors as per approval of Engineer-in-charge.

Providing & Applying waterproofing work shall include complete surface preparation by

thoroughly cleaning the RCC surface, opening all cracks and construction joints in a 25 mm ×

15 mm “V” groove and filling them with Polymer Modified Mortar using BRONCO CEMREPAIR

PMC or equivalent, followed by forming a proper roundel at all slab–wall junctions using

cement–sand mortar admixed with an integral waterproofing compound BRONCO CEMKRETE

or equivalent. After preparation, a two-component waterproof coating shall be applied by

103 providing and applying BRONCO CEMGUARD PLUS or equivalent at a consumption of 1.5 691.74 sqmt 770.13

kg/m² in two coats over the RCC surface. The work further includes pipe sleeve packing using

non-shrink polymer grout BRONCO CEMREPAIR PMC or equivalent, and necessary patching

with an epoxy bonding agent BRONCO CEMSHIELD EBA or equivalent. Including a 75 mm

thick brick-bat layer shall be laid with proper slope, using cement mortar admixed with

BRONCO CEMKRETE LW or equivalent at 2% by weight of cement, with the note that rate and

consumption shall vary for higher thickness.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1- cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x

105 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm 36.00 sqmt 1,293.20

thick frosted glass as details etc complete for Ventilation.

16 MTRS FLAG MAST FABRICATED PART AS PER DIMENSION: TOP DIA. 150 mm,

BOTTOM DIA 360 mm, SECTION 2 nos. (SECTION LENGTH 8250 mm.) THICKNESS 3 /

mm. BASE PLATE Dia. 520 mm. X 25 mm., PCD 445 mm., with following items: Flag Mast

sections with Base Plate, Mounting Plates, Lightening Arrestor and Earthing Pipe (MS GI). (As

Drawing). Highmast shaft will be Hot Dip GI. PU paint is considered in given rates (Standard for

Flag Mast (White) 110 Micron. (COLOUR CODE : RAL 9010),

106 16 MTR FLAG MAST ACCESSORIES PART: (I) DOUBLE DRUM WINCH., (II) Ø6 MM. SS 1.00 Nos 2,30,422.51

(GRADE-AISI 316) (III) HEAD FRAME WITH ACCESSORIES, (IV) MANUAL OPERATING

HANDLE ETC. (V) MOTOR (1.5 HP), (VI) CONTROL SWITCH (VII) DECORATIVE POLE TOP

DOME. (WITHOUT FLAG, AOL, Trailing Cable & other Electrical Items)

FRP Designer Pole Top Crown,

FOUNDATION ACCESSORIES: M24 x 850mm (6 Nos.) with Template and Anchor Plate.,

Feeder pillar box as per our specification with single dial 24 hours timer.,

Single dome aviation light LED type., National Flag 12ft. X 18ft.

Supply and fixing of factory-made UHPC (Ultra High Performance Concrete) precast table of

grade M45-M50, size 600x300x320mm (LxWxH) or as per approved drawing, with fair-faced,

smooth, dense, non-porous, weather and abrasion-resistant finish, true to shape and line, free

from cracks, honeycombing or surface defects, fixed in outdoor gravel/loose-aggregate flooring

including levelling and compaction of base, embedding/anchoring to required depth with

PCC/grout base as needed, ensuring true alignment, level and plumb, and all labour, material,

tools, plant and incidentals complete as per specification, manufacturer's instructions and

directions of Engineer-in-Charge.

Sr No Description QTY Unit Rate Amount

Supply and fixing of factory-made UHPC (Ultra High Performance Concrete) precast bench of

grade M45-M50, size 18x18x18 inch (or as per approved drawing), with fair-faced, smooth,

dense, non-porous, weather and abrasion-resistant finish, true to shape and line, free from

cracks, honeycombing or surface defects, fixed in outdoor gravel/loose-aggregate flooring

including levelling and compaction of base, embedding/anchoring to required depth with

PCC/grout base as needed, ensuring true alignment, level and plumb, and all labour, material,

tools, plant and incidentals complete as per specification, manufacturer's instructions and

directions of Engineer-in-Charge.

Dry Stone Cladding:

Providing and fixing dry stone cladding to walls at all heights, using natural stone of approved

make, quality, colour, texture and finish, as per Architect’s selection, approved cladding

sample, detailed drawings and specifications. The stone shall be machine-cut to the required

sizes and thicknesses as per design/interior detail drawings, including grooves, recesses and

profiles in both directions wherever specified. The cladding shall be securely fixed using

approved stainless-steel clamps of SS 304 grade, of required size, thickness, configuration and

fabrication, including necessary PLY work/supports wherever required, complete as per

approved shop drawings. All joints between stone panels shall be properly aligned, uniformly

finished and sealed with approved weather-resistant sealant of matching shade, as per the

approved detail design. The scope shall include providing and fixing SS 304 anchor fasteners

of approved make and required size for RCC surfaces, drilling, inserting and grouting the

clamps/anchors into brick masonry or RCC walls using approved non-shrink cementitious

grout/mortar, including all necessary curing, supports, scaffolding, cutting, drilling, levelling,

alignment, finishing and making good of the substrate, complete in all respects. The Contractor

shall prepare detailed shop drawings based on the concept drawings, site conditions and

architectural details and obtain approval from the Architect/Engineer-in-Charge prior to

commencement of execution. All materials, accessories, consumables, labour, tools, tackles,

equipment and incidental works required for the complete and satisfactory execution of the dry

stone cladding shall be deemed to be included in the quoted rate, and the entire work shall be

executed strictly in accordance with the approved sample, drawings, specifications and

instructions of the Architect/Engineer-in-Charge.

Precasting and placing in position 125 mm dia. Bollards 600 mm high of required shape

including providing M.S. Pipe Sleeve 50 mm dia 300mm long in the Bollard and M.S. Pipes

mm dia and 450mm longwith 150x150x6mm M.S. plate welded at bottom and embedded

150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone

aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep

for the same in bitumen/ concrete pavement at specified spacing.

Providing and fixing approved quality Royal Touch or equivalent wooden flooring of selected

colour, shade, design and finish, including all necessary underlay/foam, locking system,

adhesive, Coating, polishing where required, cutting, fitting, edge finishing, trims/profiles,

111 skirting, wastage, labour, transportation, handling and all required accessories, laid over 616.00 Sqmt 3,085.37

properly prepared, clean, dry and levelled floor surface, complete in all respects as per

manufacturer’s specifications, approved sample, drawings and instructions of the

Architect/Engineer-in-Charge.

Providing, fabricating and fixing Stainless Steel (SS) etched logo/signage of approved design,

made from SS 304 Grade, 1.0 mm thick matt-finish plate, including English and/or Gujarati text

and graphics with colors as approved by the Architect/Client, complete with etching, finishing,

backing, fixing arrangements, fasteners, adhesives and all necessary accessories. The

logo/signage shall be circular in shape with size up to 1200 mm diameter and shall be securely

installed at any location and height within the building premises, including all labour, materials,

transportation, handling, scaffolding/lifting equipment, tools and tackles, and all incidental works

required for complete installation to the satisfaction of the Architect/Client.

Providing and fixing exterior grade Aluminium Composite Panel (ACP) cladding of approved

make, shade, texture and colour, comprising minimum 4 mm thick ACP sheets with PVDF

coating, fixed on aluminium framework/sub-frame using approved fasteners, brackets, cleats,

sealants and accessories as per manufacturer's specifications and approved drawings. The

work shall include cutting, bending, grooving, edge finishing, joint treatment, weatherproof

sealing, necessary supports, scaffolding, transportation, labour, tools and tackles, and all

incidental items required for complete installation at any height, finished in all respects to the

satisfaction of the Architect/Client.

Providing, supplying and placing Precast RCC planters of approved quality, design, pattern and

dimensions as selected by the Architect/Client, manufactured with reinforced cement concrete

and finished as per approved sample. The planters shall be of uniform size and shape with

smooth, dense and defect-free finish, free from cracks, honeycombing, chipped edges, broken

corners, surface undulations or any other visible imperfections. All edges and corners shall be

straight, true and properly finished to achieve a neat architectural appearance. The planter shall

be placed at any floor level or location as directed, including all materials, transportation,

handling, loading, unloading, lifting, shifting, placement, and incidental works required for

complete installation. Prior to procurement and execution, a sample of the proposed planter

shall be submitted and approved by the Architect/Client. The rate shall include all costs

necessary to complete the work in accordance with the approved sample and specifications

and to the satisfaction of the Architect/Client.

Barricading the entire break down or excavated area on rental basis using wooden ballies /

M.S.angles at max. 2.00 meter centre to centre, C.G.I. Sheet, reflective paint / Board out side

to avoid accident & for smooth traffic diversion & movement including cautionary board etc.

Item also includes for making temporary sufficient nos of lighting arrangement through out the

work with necessary required arrangement. The same shall be removed after completion of

Sr No Description QTY Unit Rate Amount

Extra over for Centering and shuttering including strutting, propping etc. and removal of form for

:Large Formwork flexible Birch ply-based panels confirming to Exposed Concrete Finish F4/F5,

capable of withstanding high concrete pressure (self-compacting concrete), capable of fitting

into any shape & size.

Panel system comprising of Girders, Birch plywood 220 GSM & walers with wedge-action

116 connection (to make pressure tight connection between two panels). Panel should not have 7367.00 Sq.mt 666.60

any nail impression on sheathing member.

Note:- Rates in items shall include cost of providing grooves, chamfers, molding, cut-out etc. in

formwork. With Rendring on Exposed RCC Surface, The work will include placing in position of

necessary fixtures, sleeves for various purposes, etc. complete as per drawings, specifications

and as directed by the Engineer in charge.

Water proofing without over deck insulation -Waterproofing Application: Provide and apply

coats of a single component pure PU based Dr. fixitPU 270(i) plus, moisture cured, cold applied

seamless waterproofing to achieve a DFT of approx 1.5 mm including application of moisture

insensetive primer , with the turnkey execution to be done by the manufacturer through its in

house subsidiary execution company or Partner Applicator of manufacturing company and with

10 years composite warranty against leakages. The PU membrane shall cover entire parapet

wall and pedestals, upstands upto min 300mm. The system including proper surface

preparation as per manufacturers'' specification, cleaning work, removal of loose concrete and

filling cracks with polymer modified mortar using SBR Latex, Pidicrete URP. All the

honeycombed areas shall be identified and injected with cement slurry admixed with expansive

additive, Pidicrete AM @ 225gms / bag of cement. Making of angle fillets all around the

periphery of the wall with polymer modified mortar using SBR Latex, Pidicrete URP, etc,

complete. Providing and Laying 200 GSM Polypropylene Geotextile on horizontal surfaces etc

complete as per manufacturers specification . The product conforms to Elongation at break: >

600% as per ASTM D-412, Shore A hardness: 65, Tensile strength: > 4 N/mm2, Water Vapor

Permeability > 25 gr/m2/day as per ISO 9932:91, Adhesion to concrete (concrete surface

failure) >2 N/mm2 as per ASTM D 903, Solid Content > 90% as per ASTM C836, Crack

Bridging Capability: up to 2 mm crack. 2. Horizontal Protection: Laying protective screed of avg.

75 mm thk, M20 grade with slope 1:100 containing 12 mm, 100% virgin : polypropylene fibers

@ 0.9 Kg per Cu.m with a broom finish, well compacted, curing for 7 days etc. complete. The

screed shall be laid in panels with 10mm wide construction joint and filling the panel joints with

polysulphide sealant . (Civil Material will be provided by Civil Contractor at free of cost) 3. Pipe

cutout Treatment - upto 150mm dia. Providing & filling Epoxy bond coat around the pipes with

sand sprinkling extended 25mm above the slab top level & Grouting & Sealing around the

periphery joints of pipes passing through on the floor & walls by filling microconcrete in the gap

between the cut cuts in the slab & the pipe surface & sealing around the periphery joints of the

pipes / sleeves followed by providing and applying Dr. Fixit Flexi PU 270 (I) Plus or equivalent

Pure Polyurethane system in a width of 100 mm including embedding polyester reinforcing

fabric between the two coats & applied around the pipe periphery all as per manufactures

recommendation etc. complete.

Designing, fabricating, supplying, transporting, and installing METACOIN™ or equivalent

Cassette Cladding System comprising 2.0 mm thick Aluminium Alloy 3105 (H14/H16) sheets

with solid colour Pure Polyester (PE) coil-coated finish of approved shade and texture,

fabricated into cassette panels with folded edges, stiffeners, and concealed fixing

arrangements as per approved shop drawings. The system shall include a supporting

framework made of 50 x 50 x 3 mm thick aluminium sections, brackets, cleats, fasteners,

anchors, stainless steel hardware, EPDM gaskets, sealants, shims, and all necessary

accessories required for a complete installation. Panels shall be accurately cut, bent, and

118 assembled to maintain true alignment, uniform joints, level surfaces, and proper weather 328.50 Sq.mt 15,540.67

resistance. The aluminium coating shall provide durability, UV resistance, colour retention, and

corrosion protection suitable for exterior applications. The work shall include site measurement,

preparation of detailed shop drawings, fabrication, handling, lifting, erection, alignment, joint

treatment, finishing, cleaning, testing, and making good all interfaces with adjoining works,

complete in all respects and executed as per manufacturer's specifications, consultant/architect

approval, and relevant Indian Standards, including all labour, materials, tools, equipment,

scaffolding, and incidentals necessary to complete the work. As per Architect Design &

SUB TOTAL - 1 - ₹

Sub Head - 2 - FURNITURE WORK

Sr No Description QTY Unit Rate Amount

Providing, Manufacturing/Making, supplying and fixing a Premium Executive Table of overall

size 3300W × 1200D × 750H mm, comprising 18/25 mm commercial/BWP grade plywood

structure with natural veneer finish and approved melamine polish. Table top to be finished with

premium Quartz Stone of approved shade and thickness, fixed over plywood substrate. Table

legs to be made of seasoned wooden members with matching veneer and melamine finish.

Table box, modesty panel, storage units, tray, shutter and 3-drawer pedestal to be fabricated in

plywood with natural veneer and melamine polish. Table to be provided with integrated

charging station comprising power, data and USB charging provisions complete as required.

Curved corner profile to be developed using flexible plywood and MDF framework, finished with

decorative brass plate cladding/inlay and metal detailing as per approved design. Decorative

brass plate accents shall also be provided on selected leg and corner portions to enhance the

premium aesthetic appearance. All drawers shall be fitted with quality telescopic channels,

shutters with soft-close hardware, and necessary handles/accessories. The item shall also

include a matching Rear Credenza/Side Storage Unit of size 3300W × 450D × 750H mm,

fabricated from 18/25 mm commercial/BWP grade plywood with natural veneer finish and

approved melamine polish, matching the design, finish and detailing of the executive table. The

credenza shall comprise a combination of shutters, drawers, open shelves and storage

compartments as per approved design, complete with soft-close hinges, telescopic channels,

locks, handles and all necessary hardware. Credenza top shall be finished with matching

veneer/melamine finish or Quartz Stone finish as directed, including decorative brass plate

detailing/inlays to coordinate with the executive table design. The complete item shall include all

materials, labour, plywood, veneer, quartz stone, flexible ply, MDF, brass plate work, charging

station, hardware, fittings, edge finishing, polishing, transportation, installation and completion

of the work in all respects as per approved drawings, specifications and direction of the

Architect/Engineer-in-Charge.

Providing, Manufacturing/Making, supplying and fixing a Premium Executive Table of overall

size 2400W × 1200D × 750H mm, comprising 18/25 mm commercial/BWP grade plywood

structure with natural veneer finish and approved melamine polish. Table top to be finished with

premium Quartz Stone of approved shade and thickness, fixed over plywood substrate. Table

legs to be made of seasoned wooden members with matching veneer and melamine finish.

Table box, modesty panel, storage units, tray, shutter and 3-drawer pedestal to be fabricated in

plywood with natural veneer and melamine polish. Table to be provided with integrated

charging station comprising power, data and USB charging provisions complete as required.

Curved corner profile to be developed using flexible plywood and MDF framework, finished with

metal detailing as per approved design. All drawers shall be fitted with quality telescopic

channels, shutters with soft-close hardware, and necessary handles/accessories. The item

shall also include a matching Rear Credenza/Side Storage Unit of size 2400W × 450D × 750H

mm,fabricated from 18/25 mm commercial/BWP grade plywood with natural veneer finish and

approved melamine polish with premimum Quartz Stone of approved shade & matching the

design, finish and detailing of the executive table. The credenza shall comprise a combination

of shutters, drawers, open shelves and storage compartments as per approved design,

complete with soft-close hinges, telescopic channels, locks, handles and all necessary

hardware. Credenza top shall be finished with matching veneer/melamine finish or Quartz

Stone finish as directed. The complete item shall include all materials, labour, plywood, veneer,

quartz stone, flexible ply, MDF, brass plate work, charging station, hardware, fittings, edge

finishing, polishing, transportation, installation and completion of the work in all respects as per

approved drawings, specifications and direction of the Architect design & detail drawings &

selection/Engineer-in-Charge.

Providing and supplying Cabin Desk of size 1800 x 900 x 750 mm along with Side Unit of size

1800 x 450 x 600 mm, comprising 25 mm thick prelaminated particle board top with chamfer

straight edge and 2 mm thick PVC edge banding, complete with leg understructure fabricated

from powder-coated/PVD Coating steel components (AkzoNobel powder coating 60–80

microns) including main beams, end legs, brackets, 40 x 40 mm CRC square pipe beam with

die-cast brackets, aluminium soft-closing flip-top wire management unit of size 450 x 150 mm

3 with 3D cut-outs, powder-coated wire carrier, wire riser, and 450 mm high powder-coated metal 48.00 No. 43,995.60

modesty panel, all complete as per approved drawings and specifications. Side unit shall

consist of 2 drawers and openable shutter, finished with 25 mm thick top and 18 mm thick

prelaminated particle board body and shutters, with 2 mm PVC edge banding on all exposed

surfaces and finger groove profile, including all hardware, fittings, accessories, labour,

transportation, installation, and completion of work in all respects. Product, finish, colour, make,

and all related components shall be selected as per Architect’s approval/selection, and

contractor shall prepare and obtain approval of site mock-up before execution of the work..

Sr No Description QTY Unit Rate Amount

Providing and supplying Cabin Desk of size 1500 x 750 x 750 mm height along with Side Unit

of size 900 x 450 x 750 mm height and Rear Storage Unit of size 1500 x 450 x 750 mm height,

comprising 25 mm thick prelaminated particle board top with chamfer straight edge and 2 mm

thick PVC edge banding, supported on metal finish straight leg understructure in approved

shade, fabricated from powder-coated/PVD Coating steel components with AkzoNobel powder

coating of 60–80 microns, including brackets, main beams, end legs, and 40 x 40 mm CRC

square pipe beam with powder-coated finish and die-cast brackets for supporting the tabletop.

The desk shall be provided with aluminium soft-closing flip-top wire management unit of size

4 450 x 150 mm with 3D cut-outs for cable accessibility, powder-coated wire carrier for power and 34.00 No. 51,298.91

data cable management, powder-coated wire riser for routing cables from floor level, and

mm high powder-coated metal modesty panel. Side Unit shall consist of 3 drawers and one

openable shutter, and Rear Storage Unit shall consist of four openable shutters, finished with

25 mm thick top and 18 mm thick prelaminated particle board body and shutters, with 2 mm

PVC edge banding on all exposed surfaces and finger groove profile. The item shall include all

hardware, fittings, accessories, labour, transportation, installation, and completion of work in all

respects as per approved drawings and specifications. Product, finish, colour, make, and all

related components shall be selected as per Architect’s approval/selection, and contractor shall

prepare and obtain approval of site mock-up before execution of the work.

Providing and supplying Cabin Desk of size 1500 x 900 x 750 mm along with Side Unit of size

900 x 450 x 750 mm, comprising 25 mm thick prelaminated particle board top with chamfer

straight edge and 2 mm thick PVC edge banding, complete with leg understructure fabricated

from powder-coated/PVD Coating steel components (AkzoNobel powder coating 60–80

microns) including main beams, end legs, brackets, 40 x 40 mm CRC square pipe beam with

die-cast brackets, aluminium soft-closing flip-top wire management unit of size 450 x 150 mm

5 with 3D cut-outs, powder-coated wire carrier, wire riser, and 450 mm high powder-coated metal 24.00 No. 33,729.96

modesty panel, all complete as per approved drawings and specifications. Side unit shall

consist of 3 drawers and one openable shutter, finished with 25 mm thick top and 18 mm thick

prelaminated particle board body and shutter, with 2 mm PVC edge banding on all exposed

surfaces and finger groove profile, including all hardware, fittings, accessories, labour,

transportation, installation, and completion of work in all respects. Product, finish, colour, make,

and all related components shall be selected as per Architect’s approval/selection, and

contractor shall prepare and obtain approval of site mock-up before execution of the work.

Providing and supplying Cabin Desk of size 1500 x 750 x 750 mm complete with 25 mm thick

prelaminated particle board top having chamfer straight edge and 2 mm thick PVC edge

banding, supported on metal finish straight leg understructure in approved shade, fabricated

from powder-coated/PVD Coating steel components with AkzoNobel powder coating of 60–80

microns, including brackets, main beams, end legs, and 40 x 40 mm CRC square pipe beam

with powder-coated finish and die-cast brackets for supporting the tabletop. The desk shall be

6 provided with aluminium soft-closing flip-top wire management unit of size 450 x 150 mm with 86.00 No. 25,284.34

3D cut-outs for cable accessibility, powder-coated wire carrier for power and data cable

management, powder-coated wire riser for routing cables from floor level, and 450 mm high

powder-coated metal modesty panel, complete with all hardware, fittings, accessories, labour,

transportation, installation, and finishing as per approved drawings and specifications. Product,

finish, colour, make, and all related components shall be selected as per Architect’s

approval/selection, and contractor shall prepare and obtain approval of site mock-up before

execution of the work.

Providing and supplying Cabin Desk of size 1800 x 900 x 750 mm along with Side Unit of size

900 x 450 x 750 mm, comprising 25 mm thick prelaminated particle board top with chamfer

straight edge and 2 mm thick PVC edge banding, complete with leg understructure fabricated

from powder-coated/PVD Coating steel components (AkzoNobel powder coating 60–80

microns) including main beams, end legs, brackets, 40 x 40 mm CRC square pipe beam with

die-cast brackets, aluminium soft-closing flip-top wire management unit of size 450 x 150 mm

7 with 3D cut-outs, powder-coated wire carrier, wire riser, and 450 mm high powder-coated metal 48.00 No. 40,618.16

modesty panel, all complete as per approved drawings and specifications. Side unit shall

consist of 3 drawers and one openable shutter, finished with 25 mm thick top and 18 mm thick

prelaminated particle board body and shutter, with 2 mm PVC edge banding on all exposed

surfaces and finger groove profile, including all hardware, fittings, accessories, labour,

transportation, installation, and completion of work in all respects. Product, finish, colour, make,

and all related components shall be selected as per Architect’s approval/selection, and

contractor shall prepare and obtain approval of site mock-up before execution of the work.

Sr No Description QTY Unit Rate Amount

Providing and supplying Cabin Desk of size 1800 x 900 x 750 mm complete with 25 mm thick

prelaminated particle board top having chamfer straight edge and 2 mm thick PVC edge

banding, supported on metal finish straight leg understructure in approved shade, fabricated

from powder-coated/PVD Coating steel components with AkzoNobel powder coating of 60–80

microns, including brackets, main beams, end legs, and 40 x 40 mm CRC square pipe beam

with powder-coated finish and die-cast brackets for supporting the tabletop. The desk shall be

8 provided with aluminium soft-closing flip-top wire management unit of size 450 x 150 mm with 6.00 No. 41,573.62

3D cut-outs for cable accessibility, powder-coated wire carrier for power and data cable

management, powder-coated wire riser for routing cables from floor level, and 450 mm high

powder-coated metal modesty panel, complete with all hardware, fittings, accessories, labour,

transportation, installation, and finishing as per approved drawings and specifications. Product,

finish, colour, make, and all related components shall be selected as per Architect’s

approval/selection, and contractor shall prepare and obtain approval of site mock-up before

execution of the work.

Providing and supplying Library Table of size 7200 x 1200 x 750 mm, complete with 25 mm

thick prelaminated particle board (PLPB) top having chamfer straight edge and 2 mm thick

PVC edge banding, finished in approved laminate colour. The table shall be supported on

powder-coated X-Bench straight legs fabricated from 50 x 50 mm metal sections in approved

shade, with AkzoNobel powder coating of 60–80 microns, connected through suitable brackets

for structural support. The understructure shall comprise main beams and end legs assembled

to form a rigid open table base. Beam members shall be fabricated from 40 x 40 mm CRC

square pipe with powder-coated finish and provided with die-cast brackets for supporting the

tabletop. The item shall include all hardware, fittings, accessories, labour, transportation,

installation, and completion of work in all respects as per approved drawings and specifications.

Product, finish, colour, make, and all related components shall be selected as per Architect’s

approval/selection, and contractor shall prepare and obtain approval of site mock-up before

execution of the work.

MEDIUM HEIGHT STORAGE

Providing, supplying, and fixing Medium Height Storage Unit of size 900W × 450D × 1200H

mm. The unit shall be manufactured using 18 mm thick prelaminated particle board, with the

top panel finished with 2 mm PVC edge banding on all edges. The carcass, including side

panels, bottom, back panel, and shutters, shall be made of 18 mm thick prelaminated particle

board with PVC edge banding on all exposed edges. The storage unit shall be provided with

10 one adjustable shelf and one fixed shelf, both made from 18 mm thick prelaminated particle 53.00 No. 14,182.42

board with PVC edge banding on all edges. The shutters shall be lockable swing-type doors

with integrated finger groove handles. Hardware shall include Hettich hinges and locking

arrangement, complete with all necessary fittings and accessories. The finish, shade, and

overall design shall be selected by the Architect. The item shall include all materials, hardware,

transportation, installation, and fixing complete in all respects as per approved drawings and

specifications.

MEDIUM HEIGHT STORAGE WITH PLANTER

Providing, supplying, and fixing Medium Height Storage Unit of size 900W × 600D × 1200H

mm. The unit shall be manufactured using 18 mm thick prelaminated particle board, with the

top panel finished with 2 mm PVC edge banding on all edges. The carcass, including side

panels, bottom, back panel, and shutters, shall be made of 18 mm thick prelaminated particle

board with PVC edge banding on all exposed edges. The storage unit shall be provided with

11 one adjustable shelf and one fixed shelf, both made from 18 mm thick prelaminated particle 17.00 No. 14,887.40

board with PVC edge banding on all edges. The shutters shall be lockable swing-type doors

with integrated finger groove handles. Hardware shall include Hettich hinges and locking

arrangement, complete with all necessary fittings and accessories. The finish, shade, and

overall design shall be selected by the Architect. The item shall include all materials, hardware,

transportation, installation, and fixing complete in all respects as per approved drawings and

specifications.

FULL HEIGHT STORAGE

Providing, supplying, and fixing Full Height Storage Unit of size 900W × 600D × 2400H mm.

The unit shall be manufactured using 18 mm thick prelaminated particle board, with the top

panel finished with 2 mm PVC edge banding on all edges. The carcass, including side panels,

bottom, back panel, and shutters, shall be made of 18 mm thick prelaminated particle board

with PVC edge banding on all exposed edges. The storage unit shall be provided with one

12 adjustable shelf and one fixed shelf, both made from 18 mm thick prelaminated particle board 291.00 No. 35,277.28

with PVC edge banding on all edges. The shutters shall be lockable swing-type doors with

integrated finger groove handles. Hardware shall include Hettich hinges and locking

arrangement, complete with all necessary fittings and accessories. The finish, shade, and

overall design shall be selected by the Architect. The item shall include all materials, hardware,

transportation, installation, and fixing complete in all respects as per approved drawings and

specifications.

Providing and supplying Full Height Storage Unit of size 900 mmW x 450 mmD x 1950 mmH,

fabricated from 0.8 mm thick CRCA steel sheet with powder-coated finish for carcass, body,

shutters, back panel, and shelves, complete with lockable swing shutters incorporating

concealed handles and glass infill panels as specified. The unit shall be provided with

13 adequately designed shelves, necessary reinforcements, locking arrangement, hardware, 20.00 No. 32,663.40

fittings, accessories, labour, transportation, installation, and finishing, complete in all respects

as per approved drawings and specifications. Product, finish, colour, glass type, make, and all

related components shall be selected as per Architect’s approval/selection, and contractor shall

prepare and obtain approval of site mock-up before execution of the work.

Sr No Description QTY Unit Rate Amount

LINEAR WORKSTATION - SHARING

Providing and supplying Sharing Workstation of size 1500 mm (W) x 750 mm (D) x 750/1200

mm (H) (measured and paid on per seat basis as per 4-seat cluster configuration), comprising

25 mm thick prelaminated particle board tabletop with flat straight edge and 2 mm thick PVC

edge banding, finished in approved laminate colour. The workstation shall be provided with

mm thick main partition panel of 1200 mm height, having pin-up fabric finish above tabletop

level and laminate finish below tabletop level, complete with provision for electrical and data cut-

outs. Side return partition panel of 1200 mm height shall also be 60 mm thick with pin-up fabric

finish above tabletop level and laminate finish below tabletop level. Suitable grommets shall be

provided for wire management. The item shall include all necessary hardware, fittings,

accessories, supports, labour, transportation, installation, and completion of work in all respects

as per approved drawings and specifications. Product, finish, fabric, laminate colour, make, and

all related components shall be selected as per Architect’s approval/selection, and contractor

shall prepare and obtain approval of site mock-up before execution of the work.

LINEAR WORKSTATION - NON SHARING

Providing and supplying Non-Sharing Workstation of size 1500 mm (W) x 750 mm (D) x

750/1200 mm (H) (measured and paid on per seat basis as per 2-seat cluster configuration),

comprising 25 mm thick prelaminated particle board tabletop with flat straight edge and 2 mm

thick PVC edge banding, finished in approved laminate colour. The workstation shall be

provided with 60 mm thick main partition panel of 1200 mm height, having pin-up fabric finish

above tabletop level and laminate finish below tabletop level, complete with provision for

15 electrical and data cut-outs. Side return partition panel of 1200 mm height shall also be 60 mm 13.00 No. 27,023.56

thick with pin-up fabric finish above tabletop level and laminate finish below tabletop level.

Suitable grommets shall be provided for wire management. The item shall include all necessary

hardware, fittings, accessories, supports, labour, transportation, installation, and completion of

work in all respects as per approved drawings and specifications. Product, finish, fabric,

laminate colour, make, and all related components shall be selected as per Architect’s

approval/selection, and contractor shall prepare and obtain approval of site mock-up before

execution of the work.

Providing and supplying 2-Seater Sofa of size 2100 x 800 x 450–750 mm height or nearest

equivalent approved size, comprising seat and back constructed with seasoned wooden frame

structure and high-density foam cushioning, upholstered in approved fabric finish. The sofa

shall be supported on metal powdercoated / PVD Coating leg/frame structure with suitable

finish and necessary reinforcements for stability and durability. The item shall include all

hardware, fittings, accessories, labour, transportation, delivery, placement, and installation,

complete in all respects as per approved drawings and specifications. Product, size, design,

fabric, finish, colour, make, and all related components shall be selected as per Architect’s

approval/selection from approved market products/vendors, and contractor shall submit

samples/catalogues and prepare site mock-up, if required, before procurement and installation

of the final product.

Providing and supplying 2-Seater Sofa of size 1800 x 800 x 450–750 mm height or nearest

equivalent approved size, comprising seat and back constructed with seasoned wooden frame

structure and high-density foam cushioning, upholstered in approved fabric finish. The sofa

shall be supported on metal powdercoated / PVD Coating leg/frame structure with suitable

finish and necessary reinforcements for stability and durability. The item shall include all

hardware, fittings, accessories, labour, transportation, delivery, placement, and installation,

complete in all respects as per approved drawings and specifications. Product, size, design,

fabric, finish, colour, make, and all related components shall be selected as per Architect’s

approval/selection from approved market products/vendors, and contractor shall submit

samples/catalogues and prepare site mock-up, if required, before procurement and installation

of the final product.

Providing and supplying 2-Seater Sofa of size 900 x 800 x 450–750 mm height or nearest

equivalent approved size, comprising seat and back constructed with seasoned wooden frame

structure and high-density foam cushioning, upholstered in approved fabric finish. The sofa

shall be supported on metal powdercoated / PVD Coating leg/frame structure with suitable

finish and necessary reinforcements for stability and durability. The item shall include all

hardware, fittings, accessories, labour, transportation, delivery, placement, and installation,

complete in all respects as per approved drawings and specifications. Product, size, design,

fabric, finish, colour, make, and all related components shall be selected as per Architect’s

approval/selection from approved market products/vendors, and contractor shall submit

samples/catalogues and prepare site mock-up, if required, before procurement and installation

of the final product.

PREMIMUM CHAIR (High Back)

Providing, supplying, and placing in position Premium Executive Revolving Chair (High Back),

complete with wooden and MS frame structure, PU foam cushioned backrest, moulded PU

foam seat, chrome-finished armrests with PU cladding, synchro tilt mechanism, gas lift height

adjustment system, chrome-finished base with 60 mm heavy-duty castors, and all standard

accessories as per manufacturer’s specifications. The chair shall be ergonomically designed for

executive use and shall be supplied complete in all respects, including all materials, upholstery,

fittings, labour, transportation, loading, unloading, handling, and installation. Product design,

upholstery material, finish, colour, make, model, and all related components shall be selected

as per Architect’s approval/selection from approved market products/vendors or equivalent

approved make. Contractor shall submit samples/catalogues for approval and prepare site

mock-up, if required, before procurement. The rate shall include all taxes, wastage, protection

during transit and installation, and completion of the work to the satisfaction of the

Sr No Description QTY Unit Rate Amount

PREMIMUM CHAIR (Medium Back)

Providing, supplying, and placing in position Premium Executive Revolving Chair (Medium

Back), complete with wooden and MS frame structure, PU foam cushioned backrest, moulded

PU foam seat, chrome-finished armrests with PU cladding, synchro tilt mechanism, gas lift

height adjustment system, chrome-finished base with 60 mm heavy-duty castors, and all

standard accessories as per manufacturer’s specifications. The chair shall be ergonomically

designed for executive use and shall be supplied complete in all respects, including all

materials, upholstery, fittings, labour, transportation, loading, unloading, handling, and

installation. Product design, upholstery material, finish, colour, make, model, and all related

components shall be selected as per Architect’s approval/selection from approved market

products/vendors or equivalent approved make. Contractor shall submit samples/catalogues

for approval and prepare site mock-up, if required, before procurement. The rate shall include

all taxes, wastage, protection during transit and installation, and completion of the work to the

satisfaction of the Architect/EIC.

EXECUTIVE REVOLVING CHAIR (High Back)

Providing, supplying, and placing in position Executive Revolving Chair (High Back),

ergonomically designed and complete with high-back support, adjustable height mechanism,

revolving base with castors, armrests, and all necessary accessories as per approved

specifications and manufacturer’s standards. The chair shall be supplied, delivered, and

installed complete in all respects, including all materials, components, fittings, labour,

21 transportation, loading, unloading, handling, and installation. Product design, dimensions, 16.00 No. 38,885.00

material specifications, upholstery, finish, colour, make, model, and all related components

shall be selected as per Architect’s approval/selection from approved market products/vendors

or equivalent approved make. Contractor shall submit samples/catalogues for approval and

prepare site mock-up, if required, before procurement. The rate shall include all taxes, wastage,

protection against damage during transit and installation, and completion of the work to the

satisfaction of the Architect/EIC.

EXECUTIVE REVOLVING CHAIR (Medium Back)

Providing, supplying, and placing in position Executive Revolving Chair (Medium Back),

ergonomically designed and complete with high-back support, adjustable height mechanism,

revolving base with castors, armrests, and all necessary accessories as per approved

specifications and manufacturer’s standards. The chair shall be supplied, delivered, and

installed complete in all respects, including all materials, components, fittings, labour,

22 transportation, loading, unloading, handling, and installation. Product design, dimensions, 304.00 No. 24,997.50

material specifications, upholstery, finish, colour, make, model, and all related components

shall be selected as per Architect’s approval/selection from approved market products/vendors

or equivalent approved make. Contractor shall submit samples/catalogues for approval and

prepare site mock-up, if required, before procurement. The rate shall include all taxes, wastage,

protection against damage during transit and installation, and completion of the work to the

satisfaction of the Architect/EIC.

OFFICE REVOLVING CHAIR (High Back)

Providing, supplying, and placing in position Executive Revolving Chair (High Back),

ergonomically designed and complete with high-back support, adjustable height mechanism,

revolving base with castors, armrests, and all necessary accessories as per approved

specifications and manufacturer’s standards. The chair shall be supplied, delivered, and

installed complete in all respects, including all materials, components, fittings, labour,

23 transportation, loading, unloading, handling, and installation. Product design, dimensions, 75.00 No. 17,776.00

material specifications, upholstery, finish, colour, make, model, and all related components

shall be selected as per Architect’s approval/selection from approved market products/vendors

or equivalent approved make. Contractor shall submit samples/catalogues for approval and

prepare site mock-up, if required, before procurement. The rate shall include all taxes, wastage,

protection against damage during transit and installation, and completion of the work to the

satisfaction of the Architect/EIC.

OFFICE REVOLVING CHAIR (Medium Back)

Providing, supplying, and placing in position Executive Revolving Chair (Medium Back),

ergonomically designed and complete with high-back support, adjustable height mechanism,

revolving base with castors, armrests, and all necessary accessories as per approved

specifications and manufacturer’s standards. The chair shall be supplied, delivered, and

installed complete in all respects, including all materials, components, fittings, labour,

24 transportation, loading, unloading, handling, and installation. Product design, dimensions, 375.00 No. 13,887.50

material specifications, upholstery, finish, colour, make, model, and all related components

shall be selected as per Architect’s approval/selection from approved market products/vendors

or equivalent approved make. Contractor shall submit samples/catalogues for approval and

prepare site mock-up, if required, before procurement. The rate shall include all taxes, wastage,

protection against damage during transit and installation, and completion of the work to the

satisfaction of the Architect/EIC.

Sr No Description QTY Unit Rate Amount

EXECUTIVE TV UNIT

Providing, Manufacturing/Making, supplying and fixing a Premium TV Unit of overall size 2100L

× 450D × 650H, comprising 18/25 mm BWP grade plywood structure finished with selected

natural veneer and approved melamine polish, matching the approved executive furniture

design language. The TV unit top shall be finished with premium Quartz Stone of approved

shade and thickness fixed over plywood substrate. The unit shall consist of shutter storage

compartments, open display shelves and equipment storage spaces as per approved

drawings. The main body, side panels, shelves and shutters shall be fabricated from BWP

grade plywood with veneer finish and melamine polish on all exposed surfaces, while internal

surfaces shall be finished with approved laminate. Decorative brass plate cladding/inlay

detailing shall be provided on side feature panels, corner elements and selected portions of the

unit to match the executive table, conference table and theme. Curved profiles, wherever

required, shall be formed using flexible plywood and MDF framework with brass detailing as per

approved design. The unit shall be provided with concealed cable management provisions,

access panels, wire routing channels and necessary openings for TV, media equipment and

electrical/data connections. Open display niches shall be provided with concealed warm LED

lighting complete with drivers, wiring and accessories. All shutters shall be fitted with premium

soft-close hinges, handles and hardware of approved make such as Hafele, Hettich, Kich,

Dorma, EBCO or equivalent. All exposed veneer surfaces shall be finished with premium

melamine/Monocoat polish. The item shall include all materials, labour, plywood, veneer,

laminate, quartz stone, flexible ply, MDF, brass plate work, LED lighting, cable management

accessories, hardware, fittings, edge finishing, polishing, transportation, installation and

completion of the work in all respects as per approved drawings, specifications and direction &

selection by the Architect/Engineer-in-Charge.

EXECUTIVE TV UNIT

Providing, Manufacturing/Making, supplying and fixing a Premium TV Unit of overall size 2100L

× 450D × 650H, comprising 18/25 mm BWP grade plywood structure finished with selected

natural veneer and approved melamine polish, matching the approved executive furniture

design language. The TV unit top shall be finished with premium Quartz Stone of approved

shade and thickness fixed over plywood substrate. The unit shall consist of shutter storage

compartments, open display shelves and equipment storage spaces as per approved

drawings. The main body, side panels, shelves and shutters shall be fabricated from BWP

grade plywood with veneer finish and melamine polish on all exposed surfaces, while internal

surfaces shall be finished with approved laminate. corner elements and selected portions of the

unit to match the executive table, conference table theme. Curved profiles, wherever required,

26 shall be formed using flexible plywood and MDF framework detailing as per approved design. 24.00 No. 94,435.00

The unit shall be provided with concealed cable management provisions, access panels, wire

routing channels and necessary openings for TV, media equipment and electrical/data

connections. Open display niches shall be provided with concealed warm LED lighting

complete with drivers, wiring and accessories. All shutters shall be fitted with premium soft-

close hinges, handles and hardware of approved make such as Hafele, Hettich, Kich, Dorma,

EBCO or equivalent. All exposed veneer surfaces shall be finished with premium

melamine/Monocoat polish. The item shall include all materials, labour, plywood, veneer,

laminate, quartz stone, flexible ply, MDF, LED lighting, cable management accessories,

hardware, fittings, edge finishing, polishing, transportation, installation and completion of the

work in all respects as per approved drawings, specifications and direction & selection by the

Architect/Engineer-in-Charge.

BOARD ROOM TABLE

Providing, Making, Fabricating, Supplying and Fixing premium quality custom made U-Shape

Conference Table set having overall size of (14250L + 14250L + 14250L + 14250L + 2400L) ×

800D × 750H mm, comprising up to 20 mm thick premium engineered quartz stone top with

approved shade and pattern, including upto 40 mm thick built-up edge profile, supported on

heavy duty BWP grade marine plywood box construction with necessary internal framing,

stiffeners and structural strengthening members to ensure stability and long-term performance.

The exposed fascia, modesty panels, end panels and curved corner portions shall be finished

with selected natural wood veneer and decorative fluted veneer panels, duly matched and fixed

with approved adhesives, complete with all necessary edge banding, groove detailing, joinery

work and seamless finishing. The table shall include SS 304 grade decorative metal plates and

27 trims of approved thickness and design with PVD metallic coating in approved shade, complete 1.00 No. 38,88,500.00

with cut-outs and provisions for power/data modules, wire management access points, cable

routing channels and maintenance accessibility as per approved drawings. All veneer surfaces

shall be finished with premium PU matt polish, including necessary surface preparation,

sanding, staining and protective coating to achieve uniform finish. The item shall include all

materials, labour, hardware, accessories, fixtures, supports, transportation, handling, loading,

unloading, installation, alignment, levelling, protection and completion of work in all respects as

directed by the Architect/Engineer-in-Charge. Light fittings, LED profiles, drivers and electrical

components are not included in this item; however, necessary grooves, recesses, openings

and fixing provisions for future installation shall be provided. The complete conference table

shall be executed strictly as per approved shop drawings, site dimensions, design intent,

material samples and Architect's Selection and Approval.

Providing, supplying, and fixing Centre Table of size 600L × 600D × 450H mm. The table top

shall be manufactured from 50 mm thick MDF finished in white PU paint finish, providing a

smooth and durable surface. The understructure shall be fabricated from mild steel (MS) with

laser-cut designer legs, finished in silver-grey powder coating for enhanced durability and

aesthetics. The finish, shade, and overall design shall be selected by the Architect. The item

shall include all materials, hardware, fabrication, finishing, transportation, installation, and fixing

complete in all respects as per approved drawings and specifications.

Sr No Description QTY Unit Rate Amount

Providing, supplying, and fixing Centre Table of size 1200L × 600D × 450H mm. The table top

shall be manufactured from 50 mm thick MDF finished in white PU paint finish, providing a

smooth and durable surface. The understructure shall be fabricated from mild steel (MS) with

laser-cut designer legs, finished in silver-grey powder coating for enhanced durability and

aesthetics. The finish, shade, and overall design shall be selected by the Architect. The item

shall include all materials, hardware, fabrication, finishing, transportation, installation, and fixing

complete in all respects as per approved drawings and specifications.

Providing, supplying, and fixing Centre Table of size 800 with 400 mm diameter X 400mm

Height. The table top shall be manufactured from prelaminated particle board with straight PVC

edge banding on all exposed edges. The understructure shall be fabricated from metal, finished

with selected powder coating finish for durability and aesthetic appeal. The finish, colour, and

overall design shall be selected by the Architect. The item shall include all materials, hardware,

fabrication, finishing, transportation, installation, and fixing complete in all respects as per

approved drawings and specifications.

Providing and supplying Center Table complete in approved material, finish, colour, design,

shape, and size, including all necessary hardware, fittings, accessories, labour, transportation,

and installation, complete in all respects as per approved drawings and specifications. The

shape, size, material, finish, make, and model of the center table shall be selected as per

Architect’s approval/selection from approved market products/vendors. Contractor shall submit

samples/catalogues for approval and prepare site mock-up, if required, before procurement

and installation of the final product.

Providing and supplying Side Table complete in approved material, finish, colour, design,

shape, and size, including all necessary hardware, fittings, accessories, labour, transportation,

and installation, complete in all respects as per approved drawings and specifications. The

shape, size, material, finish, make, and model of the center table shall be selected as per

Architect’s approval/selection from approved market products/vendors. Contractor shall submit

samples/catalogues for approval and prepare site mock-up, if required, before procurement

and installation of the final product.

ROUND DISCUSSION TABLE

Providing, supplying, and fixing Discussion Table of size 1050 mm diameter × 750 mm height.

The table top shall be manufactured from 25 mm thick prelaminated particle board with reverse

chamfer edge on all sides and positioned at 750 mm height from finished floor level. The

33 understructure shall consist of a chrome-finished round pole support fixed to a 500 mm 12.00 No. 13,045.16

diameter round base plate, providing stability and a clean contemporary appearance. The

finish, colour, and overall design shall be selected by the Architect. The item shall include all

materials, hardware, fittings, fabrication, finishing, transportation, installation, and fixing

complete in all respects as per approved drawings and specifications.

EXECUTIVE FLOOR CONFERENCE TABLE

Providing, Manufacturing/Making, supplying and fixing a Premium Conference Table of overall

size 4500L × 1500D × 750H mm, comprising 18/25 mm BWP grade plywood structure finished

with selected natural veneer and approved melamine polish. Table top to be finished with

premium Quartz Stone of approved shade and thickness fixed over plywood substrate,

including rounded corners and edge profiles as per approved design. Table base and end

panels to be fabricated from plywood with veneer finish and decorative brass plate

cladding/inlay detailing, matching the approved executive furniture design language. The table

34 shall be provided with integrated conference power module comprising power sockets, USB 2.00 No. 9,44,350.00

charging ports, data connectivity provisions and concealed cable management system with

access flaps/trays complete as required. All exposed surfaces shall be finished in premium

veneer with melamine polish, while curved portions shall be formed using flexible plywood and

MDF as required. Decorative brass accents and metal detailing shall be incorporated on corner

and feature elements to enhance the premium appearance. The item shall include all materials,

hardware, fittings, cable management accessories, brass plate work, quartz stone, veneer,

polishing, labour, transportation, installation and completion of the work in all respects as per

approved drawings, specifications and direction of the Architect/Engineer-in-Charge.

CONFERENCE TABLE

Providing, supplying, and fixing Conference Table of size 6750L × 1500D × 750H mm. The

table top shall be manufactured from 25 mm thick prelaminated particle board with reverse

chamfer edges on all sides, positioned at 750 mm height from finished floor level, and shall

include cut-out provisions for access flaps as required. The understructure shall consist of

designer HOCK legs fabricated from 50 × 75 mm MS tapered vertical members with 40 ×

mm MS horizontal connecting members, while cross members shall be made from 40 × 40 mm

35 MS sections, all finished in durable powder coating and connected with suitable brackets to 1.00 No. 99,529.44

provide structural support. The table shall be provided with a continuous single-tier powder-

coated raceway for wire management, including provision of electrical legs at intermediate

locations for routing cables from floor level to the raceway. Special aluminium access flaps of

450 mm length shall be provided for convenient access to power and data connections. The

finish, colour, and overall design shall be selected by the Architect. The item shall include all

materials, hardware, fittings, wire management accessories, fabrication, transportation,

installation, and fixing complete in all respects as per approved drawings and specifications.

Sr No Description QTY Unit Rate Amount

CONFERENCE TABLE

Providing, supplying, and fixing Conference Table of size 4500L × 1500D × 750H mm. The

table top shall be manufactured from 25 mm thick prelaminated particle board with reverse

chamfer edges on all sides, positioned at 750 mm height from finished floor level, and shall

include cut-out provisions for access flaps as required. The understructure shall consist of

designer HOCK legs fabricated from 50 × 75 mm MS tapered vertical members with 40 ×

mm MS horizontal connecting members, while cross members shall be made from 40 × 40 mm

36 MS sections, all finished in durable powder coating and connected with suitable brackets to 6.00 No. 63,626.97

provide structural support. The table shall be provided with a continuous single-tier powder-

coated raceway for wire management, including provision of electrical legs at intermediate

locations for routing cables from floor level to the raceway. Special aluminium access flaps of

450 mm length shall be provided for convenient access to power and data connections. The

finish, colour, and overall design shall be selected by the Architect. The item shall include all

materials, hardware, fittings, wire management accessories, fabrication, transportation,

installation, and fixing complete in all respects as per approved drawings and specifications.

LOW HEIGHT PARTITION

Providing, supplying, and fixing Tile Based Partition System – for cabin/workstation

applications. The partition system shall be 60 mm thick and 1200 mm hight, comprising a top

panel finished in pin-up board and the remaining panels in laminate tile boards of approved

shade and colour as specified for the workstation. The lower panel shall be finished with

laminate on both sides. All trims, connectors, and exposed framework components shall be

finished in anodized aluminium or powder-coated finish as approved. The partition system shall

incorporate integrated single-level and double-level raceways for routing power and data

cables, with the raceway positioned above the table top level as specified. The finish, colour,

and overall configuration shall be selected by the Architect. The item shall include all panels,

trims, raceways, connectors, hardware, accessories, transportation, installation, and fixing

complete in all respects as per approved drawings and specifications.

ANTE ROOM CHAIRS

Providing, supplying, and fixing Ante Room Chair complete with all accessories and fittings. The

chair shall have a cushioned seat and backrest upholstered in approved fabric, providing

comfort and durability for regular use. The internal frame shall be sturdy and suitable for

38 commercial application. The chair shall be supported on a wooden base/frame finished in 56.00 No. 17,776.00

polished natural wood finish, ensuring stability and aesthetic appeal. The fabric, polish shade,

and overall design shall be selected by the Architect. The item shall include all materials,

cushioning, upholstery, polishing, hardware, transportation, installation, and placement

complete in all respects as per approved drawings and specifications.

TODDLERS ROOM EQUIPMENT

Supply and installation of a premium-grade indoor modular soft play equipment set fabricated

from imported high-resilience, high-density cross-linked foam (minimum 40–50 kg/m³ density,

CFC-free) for superior durability, shape retention, and impact absorption. All foam cores shall

be fully upholstered in premium-grade, anti-microbial, anti-fungal, waterproof, and fire-retardant

(BS 5852/EN 71 or equivalent certified) synthetic leather/PU vinyl, in fade-resistant, UV-stable

vibrant colour tones, with reinforced double-stitched and heat-sealed seams, concealed zip

closures, and fully rounded, soft-radius edges free of hard corners or exposed fasteners. The

set shall comprise a triangular climbing wedge module with ergonomically contoured soft

climbing discs/hand-holds, a wide ramp/slide module with a reinforced high-density foam core

for extended load-bearing life and a smooth low-friction vinyl slide surface with raised safety

bolsters, and a large-format ball pit module with contoured, structurally reinforced side walls

and a reinforced plywood/HDPE internal base frame for long-term shape stability, supplied

complete with premium food-grade, non-toxic, phthalate-free soft play balls (approx. 6–8 cm

diameter, UV-stable multi-colour) in generous fill quantity. The set shall further include matching

interlocking premium foam crash mats/tumble blocks with the same high-grade upholstery

specification for extended play value and fall protection. All materials and components shall be

sourced from a reputed international/branded soft play manufacturer, complete with relevant

safety certifications (EN 1176 / ASTM F2373 or equivalent), and supplied with a minimum

warranty of 2–3 years against manufacturing defects. The complete assembly shall be installed

over a matching high-density cushioned interlocking flooring system. Rate shall be inclusive of

all premium material, play balls, custom fabrication, branding/certification documentation,

transportation, and expert on-site installation complete as per manufacturer's specification and

approved layout drawing, measured on a per-set (lot) basis.

MOBILE PEDESTAL

Providing, supplying, and fixing Mobile Pedestal for Workstation Area of size 400L × 450D ×

670H mm. The pedestal shall be manufactured from 18 mm thick prelaminated particle board

with 2 mm PVC edge banding on all exposed edges and shall be provided with integrated

finger groove handles. The unit shall consist of two book drawers and one file drawer, complete

40 with leveler supports for stability. The drawers shall be fabricated from 0.7 mm thick CRCA 53.00 No. 8,157.77

steel and mounted on telescopic slides for smooth operation and mobility. The pedestal shall

be provided with a centralized locking system for secure locking of all drawers. The finish,

colour, and overall design shall be selected by the Architect. The item shall include all

materials, hardware, locking arrangement, drawer slides, fittings, transportation, installation,

and fixing complete in all respects as per approved drawings and specifications.

Sr No Description QTY Unit Rate Amount

Providing and supplying Metal Pedestal with Castors of size 400 mm W x 450 mm D x 550 mm

H, fabricated from 0.8 mm thick CRCA steel sheet with powder-coated finish in approved

shade, comprising one drawer and one filing/storage drawer (1D+1S) complete with central

locking arrangement and key lock system. The pedestal shall be provided with heavy-duty

41 castors for mobility and side finger groove profile for ease of operation. The item shall include 10.00 No. 9,187.97

all necessary hardware, fittings, accessories, labour, transportation, installation, and completion

of work in all respects as per approved drawings and specifications. Product, finish, colour,

make, and all related components shall be selected as per Architect’s approval/selection, and

contractor shall prepare and obtain approval of site mock-up before execution of the work.

STUDY AREA TABLE

Providing, supplying, and fixing Study Area Table of size 1800L × 1200D × 750H mm. The

table top shall be manufactured from 25 mm thick prelaminated particle board with reverse

chamfer edges on all sides, positioned at 750 mm height from finished floor level, and shall

include cut-out provisions for access flaps as required. The understructure shall consist of

designer HOCK legs fabricated from 50 × 75 mm MS tapered vertical members with 40 ×

mm MS horizontal connecting members, while cross members shall be made from 40 × 40 mm

42 MS sections, all finished in durable powder coating and connected with suitable brackets to 2.00 No. 20,697.93

provide structural support. The table shall be provided with a continuous single-tier powder-

coated raceway for wire management, including provision of electrical legs at intermediate

locations for routing cables from floor level to the raceway. Special aluminium access flaps of

450 mm length shall be provided for convenient access to power and data connections. The

finish, colour, and overall design shall be selected by the Architect. The item shall include all

materials, hardware, fittings, wire management accessories, fabrication, transportation,

installation, and fixing complete in all respects as per approved drawings and specifications.

Providing, supplying, and fixing DP Unit Table of size 2700L × 1800D × 750H mm. The table

top shall be manufactured from 25 mm thick prelaminated particle board with reverse chamfer

edges on all sides, positioned at 750 mm height from finished floor level, and shall include cut-

out provisions for access flaps as required. The understructure shall consist of designer HOCK

legs fabricated from 50 × 75 mm MS tapered vertical members with 40 × 40 mm MS horizontal

connecting members, while cross members shall be made from 40 × 40 mm MS sections, all

43 finished in durable powder coating and connected with suitable brackets to provide structural 2.00 No. 44,217.80

support. The table shall be provided with a continuous single-tier powder-coated raceway for

wire management, including provision of electrical legs at intermediate locations for routing

cables from floor level to the raceway. Special aluminium access flaps of 450 mm length shall

be provided for convenient access to power and data connections. The finish, colour, and

overall design shall be selected by the Architect. The item shall include all materials, hardware,

fittings, wire management accessories, fabrication, transportation, installation, and fixing

complete in all respects as per approved drawings and specifications.

RECKLINER CHAIR

Providing and placing Premium Recliner Chair of approved make and model, having

ergonomic contemporary design with high-density foam cushioning, upholstered in premium

quality fabric/leatherette finish, adjustable reclining backrest and leg support mechanism,

cushioned armrests, sturdy internal frame and durable base, suitable for executive cabins,

meeting lounges, waiting areas and other office spaces, including all necessary fittings,

accessories, transportation, installation and commissioning, complete in all respects as per

architect selection & as directed by the Engineer-in-Charge.

COMPACTOR STORAGE

Supply and installation of SOS or equivalent make Compactor Storage System

Main Body: Rigid Knock Down construction made out of 0.8mm thk. CRCA Steel conforming to

IS: 513 Grade. Each body block (SFF/SFM/DFM) building consists of 1 Main unit & then Add-

on units ( 1, 2, 3, 4 - depending on no. of bays 2, 3, 4 & 5). Each unit has 5 loading levels

formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage.

Compactor Height from ground is 2115 mm (1980 body + 100 under_structure + 35 channel

Finish- The bodies including shelves are given anti-rust surface treatment & are powder coated

with epoxy polyester powder. It involves an 8 step treatment consisting of Hot water rinse,

Knock off degreasing, degreasing, cold water rinse I & cold water rinse II, iron phosphating,

cold water rinse, passivation & dry off oven treatment. Final finish consists of epoxy polyester

powder coating of approved color & shade with a Dry Film Thickness of 50 to 60 (+\- 5)

microns. The material is then oven baked with a controlled temperature of 180 deg.C to

Shelf-It is made of 0.8 thk CRCA steel conforming to IS: 513 Grade or DD. Shelves are having

45 10 bends & its max load bearing capacity is 70- 80 Kg uniformly distributed per shelf for drive 20.00 No. 1,32,697.84

Type of Configuration.. Shelves are mounted on support brackets & shelf level can be adjusted

.There are 4 adjustable shelves per body giving 5 loading levels, if no Cradle pair is provided.

Shelf Depth for options

1. Unit Depth(mm)381- Shelf Depth352mm

Box Files (Box file size is 275 mm Wide x 345 mm High x 90 mm Thick) can be accommodated

in both 381mm and 457mm deep units.

Under framing carrier: The Under framing carrier is a welded frame made of HR sheet 3mm

thk.suitably fabricated to take the loads based on configuration

Sizes of under framing carrier - Single face fix / Last - 915 x (no. of bays) (Width) X 457 /

(Depth) X 65 (Height)

Finish: The undercarriage, after pre-treatment, is coated with final finish consisting of epoxy

polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 50 to

Movements of the System: The movement of units is achieved mechanically through a PU

Drive wheel and 'Sprocket-Chain-Tensioner' arrangement mounted rigidly onto body side. The

torque from hand wheel is transfer to drive shaft via sprocket chain arrangement.

Sr No Description QTY Unit Rate Amount

-- as per above item --

46 COMPACTOR / DOUBLE MOBILE UNIT / DRIVE TYPE / 4 BAY / DMD4/ 60.00 No. 1,91,047.56

-- as per above item --

COMPACTOR / SINGLE FIX UNIT / DRIVE TYPE / 4 BAY / SFD4 / 3660WX457DX2137H

-- as per above item --

COMPACTOR / SINGLE MOBILE UNIT / DRIVE TYPE / 3 BAY / SMD3/ 2745WX457DX2137H

-- as per above item --

49 COMPACTOR / DOUBLE MOBILE UNIT / DRIVE TYPE / 3 BAY / DMD3/ 66.00 No. 1,45,918.74

-- as per above item --

COMPACTOR / SINGLE FIX UNIT / DRIVE TYPE / 3 BAY / SFD3 / 2745WX457DX2137H

COMPACTOR /HINGE DOOR SET (LH & RH)/ WITH HARDWARE / FOR INDIVIDUAL BAY / --

51 as per above item -- 178.00 No. 6,332.70

-- as per above item --

COMPACTOR FLOOR RAIL (6 FEET)

-- as per above item --

COMPACTOR FLOOR RAIL (4 FEET)

Supply and Placing in position Good Quality & Design Steel Bench with, Armrest & Back

Support. As per Architect Selection or as per manufacturer's specifications. As per Approved

54 Make or equivalent. The rate shall be inclusive of all material, labour, Wastages, Transporation, 10.00 No. 21,109.00

Tax, Loading, Unloading, Fixing in position including Protecting the same against any dents and

skretched etc. at all height, all floors, all levels complete to the satisfaction of the Architect and

Providing and fixing CPU trolley of Ebco or equivalent approved make, with base fabricated

55 from 1.6 mm thick CRCA sheet and sides from 1.2 mm thick CRCA sheet, complete with 285.00 No. 860.52

adjustable width to accommodate various CPU sizes, mounted on lockable castors for smooth

and secure movement, complete as per drawing, instructions, and Architect's approval.

Providing, making, polishing and fixing Reception Table of size 3000W x 750D x 750H x 1000H

mm as per approved detailed drawings. The table top shall be made from approved quality

mm thick Quartz Stone of approved brand, shade and finish with machine-finished polished

edges. The table structure, side panels, supports, legs, storage units and all other components

shall be fabricated from 19 mm thick BWR Grade Plywood conforming to IS 303. All exposed

external surfaces shall be finished with 4 mm thick natural wood veneer of approved species,

shade and grain pattern and completed with premium Monocoat/PU polish as approved by the

Architect. The front fascia/reception face shall be formed with plywood box framing and clad

with 12 mm thick Corian/Solid Surface Material of approved make, colour and finish, including

all grooves, patterns and detailing as per drawings. The front face of the reception table shall

also incorporate the Client's logo in approved size, design, material and finish, including CNC

cutting, engraving, inlay work, backlit illumination (if specified), fixing and all necessary

accessories complete as per Architect's approved drawings and instructions. All exposed

edges shall be provided with Ghana Teak Wood or approved hardwood lipping, properly fixed,

sanded and polished to match the veneer finish. The work shall include providing and fixing

cable managers, desk round grommets and wire cable hole cover caps of approved make and

minimum 50 mm diameter as required. Storage units below the table top shall be made from

mm thick BWR plywood complete with SS 304 grade channels, hinges, handles and

accessories of Hettich, Hafele, Dorma, EBCO or equivalent approved make. All materials,

labour, wastage, adhesives, consumables, hardware, transportation, installation, polishing,

finishing and site assembly shall be included in the scope. The work shall be executed as per

approved detailed interior drawings, specifications, approved samples and instructions of the

Architect and Engineer-in-Charge, complete in all respects and fulfilling the Architect's design

intent without any extra claim.

Sr No Description QTY Unit Rate Amount

RECEPTION TABLE VIP ENTRY

Providing, making, polishing and fixing Reception Table of size 2100W x 750D x 750H x 1000H

mm as per approved detailed drawings. The table top shall be made from approved quality

mm thick Quartz Stone of approved brand, shade and finish with machine-finished polished

edges. The table structure, side panels, supports, legs, storage units and all other components

shall be fabricated from 19 mm thick BWR Grade Plywood conforming to IS 303. All exposed

external surfaces shall be finished with 4 mm thick natural wood veneer of approved species,

shade and grain pattern and completed with premium Monocoat/PU polish as approved by the

Architect. The front fascia/reception face shall be formed with plywood box framing and clad

with 12 mm thick Corian/Solid Surface Material of approved make, colour and finish, including

all grooves, patterns and detailing as per drawings. The front face of the reception table shall

also incorporate the Client's logo in approved size, design, material and finish, including CNC

57 cutting, engraving, inlay work, backlit illumination (if specified), fixing and all necessary 1.00 No. 3,55,520.00

accessories complete as per Architect's approved drawings and instructions. All exposed

edges shall be provided with Ghana Teak Wood or approved hardwood lipping, properly fixed,

sanded and polished to match the veneer finish. The work shall include providing and fixing

cable managers, desk round grommets and wire cable hole cover caps of approved make and

minimum 50 mm diameter as required. Storage units below the table top shall be made from

mm thick BWR plywood complete with SS 304 grade channels, hinges, handles and

accessories of Hettich, Hafele, Dorma, EBCO or equivalent approved make. All materials,

labour, wastage, adhesives, consumables, hardware, transportation, installation, polishing,

finishing and site assembly shall be included in the scope. The work shall be executed as per

approved detailed interior drawings, specifications, approved samples and instructions of the

Architect and Engineer-in-Charge, complete in all respects and fulfilling the Architect's design

intent without any extra claim.

OVERHEAD STORAGE UNITS

Providing and fixing factory-made modular overhead storage units, made from 18mm thick

Marine Grade BWP plywood finished with 1mm thick laminate on exposed surfaces and

balancing laminate inside. All edges to be finished with PVC edge banding tape using hot-melt

adhesive. Overhead storage units to be wall-mounted with adjustable shelf(s), shutters fixed

with soft-close concealed hinges. Undercounter units to include drawers with telescopic/soft-

close channels and modular cabinets with shelves as per design. All hardware including

handles, hinges, screws, and brackets to be of approved make. Complete assembly to be

delivered in knockdown condition and installed on site in line, level, and plumb, as per

architect’s design and approval.

UNDERCOUNTER STORAGE UNITS WITH TANDEM DRAWERS

Providing and fixing factory-finished modular undercounter storage unit made from 18mm thick

BWP grade plywood, finished with 1mm thick laminate on all exposed surfaces and balancing

laminate inside. All edges to be sealed with matching PVC edge banding using hot-melt

adhesive. Unit to comprise tandem box drawers (soft-close, full extension) of approved make

such as Hettich/Blum/Häfele, mounted on heavy-duty tandem runner channels. Drawers to be

provided in varying heights (cutlery, utensil, and deep storage) as per design. The unit shall

include necessary divisions and fittings inside the drawers as per functional requirement. All

hardware including tandem box systems, handles, screws, and brackets shall be of premium

quality and approved make. Complete unit to be factory assembled or delivered in knock-down

condition and installed on site true to level and alignment as per architect’s drawings and

PLAIN GYPSUM CEILING

Providing & Fixing M/F suspended ceiling consist of GypSerra® or equivalent (“Patented in

India (325062)”) Metal framework having ceiling drop of upto 1000mm, satisfying L/400 criterion

at 200Pa. Ceiling comprises of Single layer, tapered edge 12.5mm Gypboard® or

equivalentPlain Gypsum Board, certified GreenPro by CII & strategic location of manufacturing

plants results in lower carbon emissions, consists of an aerated gypsum core encased in, and

firmly bonded to strong paper liners and conforming to IS 2095 Part 1:2023 Type A / EN

520:2004 Type-A, having thermal conductivity 0.16w/m°k having flexural strength –

{Longitudinal > 550N & transverse > 210N}. GypSerra® or equivalent Metal frame work, in

compliance with BS EN 14195 & manufactured using CR1 Grade GI Sheet as per IS

having yield stress of 300MPa & tensile strength of 340MPa with AZ150 finish abiding to IS

15961 & tested for 500hrs of salt spray test as per ASTM B117 with a Global Warming

Potential of 3.16 Kg CO2 per Kg from third party verified EPD as per ISO14025:2006, includes

28x20x30x0.5mm GypSerra® or equivalent Perimeter Channel fixed along the periphery of

existing wall/partition with the help of (6x40mm) Impact Sleeve Anchor for brickwall/blockwall,

Ø8x45mm Gyproc® or equivalent Rawl Plug for RCC & Gyproc® or equivalent Drywall Screw

for Drywall, at 600mm centres. 25x10x0.5mm GypSerra® or equivalent Ceiling Angle is

suspended by fixing it to 37x27x25x1.6mm Gyproc® or equivalent soffit cleat {Material: CR1

steel (IS513),YS: 260Mpa ,Finish: Galvanised 120GSM (IS277)} and Ø8x45mm Gyproc® or

equivalent Rawl Plug at the true soffit, creating 1220x1220mm grid. 45x15x15x0.9mm

GypSerra® or equivalent Intermediate channel is fixed to the GypSerra® or equivalent Ceiling

Angle with M6x12mm Hex Nut & Bolt arrangement or with 2 Nos of Ø4.2x13 Gyproc® or

equivalent Metal to Metal screw. 80x53x26x0.5 GypSerra® or equivalent Ceiling Section is then

fixed to the GypSerra® or equivalent Intermediate Channel with the help of Gyproc® or

equivalent Connecting Clip {Material: EN 42J High carbon spring steel wire (BS 970), Finish:

Zinc Plating (Minimum 5μ)} and in direction perpendicular to the Intermediate channel at

457mm c/c. Single layer of 12.5mm tapered edge Gypboard® or equivalent Plain is then screw

fixed to ceiling section with ø3.5x25mm Gyproc® or equivalent Drywall Screw with 17nos per

m2 at 230mm centres on ceiling section & 150mm at periphery of ceiling. Edges & joints to be

finished with Gyproc® or equivalent Pro-Fill JC conforming to ASTM C475 & Gyproc® or

equivalent Paper tape. Vendor to submit MTC, material inspection report and/or performance

certificate for the system.

Sr No Description QTY Unit Rate Amount

MOISTURE RESISTANT CEILING

Providing & Fixing suspended ceiling consist of GypSerra® or equivalent (“Patented in India

(325062)”) Metal framework having ceiling drop of upto 1000mm for above this vendor should

follow manufacturer/architect given detail with required suspension arrangement changes,

satisfying L/400 criterion at 200Pa. Ceiling comprises of Single layer, tapered edge 12.5mm

Gyproc® or equivalent Moisture Resistant Gypsum Board, certified GreenPro by CII & strategic

location of manufacturing plants results in lower carbon emissions, consists of an aerated

gypsum core with water repellent additives encased in, and firmly bonded to strong paper liners

and conforming to IS 2095 Part 1:2023 Type H1 / EN 520:2004, Type-A & H1, having thermal

conductivity 0.19w/m°k having flexural strength – {Longitudinal > 550N & transverse > 210N}.

GypSerra® or equivalent Metal frame work, in compliance with BS EN 14195 & manufactured

using CR1 Grade GI Sheet as per IS 513, having yield stress of 300MPa & tensile strength of

340MPa with AZ150 finish abiding to IS 15961 & tested for 500hrs of salt spray test as per

ASTM B117 with a Global Warming Potential of 3.16 Kg CO2 per Kg from third party verified

EPD as per ISO14025:2006, includes 28x20x30x0.5mm GypSerra® or equivalent Perimeter

Channel fixed along the periphery of existing wall/partition with the help of (6x40mm) Impact

61 Sleeve Anchor for brickwall/blockwall, Ø8x45mm Gyproc® or equivalent Rawl Plug for RCC & 651.11 Sqm 2,262.40

Gyproc® or equivalent Drywall Screw for Drywall, at 600mm centres. 25x10x0.5mm GypSerra®

or equivalent Ceiling Angle is suspended by fixing it to 37x27x25x1.6mm Gyproc® or

equivalent soffit cleat {Material: CR1 steel (IS513),YS: 260Mpa ,Finish: Galvanised 120GSM

(IS277)} and Ø8x45mm Gyproc® or equivalent Rawl Plug at the true soffit, creating

1220x1220mm grid. 45x15x15x0.9mm GypSerra® or equivalent Intermediate channel is fixed

to the GypSerra® or equivalent Ceiling Angle with M6x12mm Hex Nut & Bolt arrangement or

with 2 Nos of Ø4.2x13 Gyproc® or equivalent Metal to Metal screw. 80x53x26x0.5 GypSerra®

or equivalent Ceiling Section is then fixed to the GypSerra® or equivalent Intermediate Channel

with the help of Gyproc® or equivalent Connecting Clip {Material: EN 42J High carbon spring

steel wire (BS 970), Finish: Zinc Plating (Minimum 5μ)} and in direction perpendicular to the

Intermediate channel at 457mm c/c. Single layer of 12.5mm tapered edge Gyproc® or

equivalent Moisture Resistant is then screw fixed to ceiling section with ø3.5x25mm Gyproc® or

equivalent Drywall Screw with 17nos per m2 at 230mm centres on ceiling section & 150mm at

periphery of ceiling. Edges & joints to be finished with Gyproc® or equivalent Pro-Fill JC

conforming to ASTM C475 & Gyproc® or equivalent Paper tape. Vendor to submit MTC,

material inspection report and/or performance certificate for the system.

Perforated Gypsum Ceiling

Providing & laying M/F Suspended single layer of 12 mm tapered edge Ecogyp Random

perforated Gypsum Board ceiling , which includes metal frame work with using CS55, IC91,

PC55, CA55 CRP surface ribbed perimeter channels with the help of nylon sleeves and screws

at 610mm centres along the perimeter of ceiling. Then Ecotone or Equivalant CRP surface

ribbed intermediate channels of size 45mm from the soffit at 1220mm centres with Ecotone or

Equivalant ultra™ CRP surface ribbed ceiling angle fixed to soffit with cleat and steel expansion

fasteners. Then Ecotone or Equivalant ultra™ CRP surface ribbed Ceiling section are then

fixed to the Ecotone or Equivalant ultra™ intermediate channel with the help of connecting clip

62 and in direction perpendicular to the Ecotone or Equivalant ultra™ intermediate channel at 651.11 Sqm 1,588.73

457.5mm centres. Single layer of ecogyp perforated gypsum board of size

2440mmx1220mmx12 mm thick Random perforation acoustic gypsum board with perforation

size of 8 MM/15 MM/20 MM. and useing Rock wool between framing and panel with the

specification of 50mm thick and 48kg density. then screw fixed to ceiling section with 25mm

drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be

jointed and finished so as to have a flush look which includes filling and finishing with Jointing

compound, Jointing paper tap and all required takels and tools (Section must from Ecotone or

Equivalant ultra Brand)including all accessories, material & labor complete as directed by

Architect / Engineer – in – charge.

Suspended vertical linear baffle ceiling "Ecotone or Equivalant" make Polyester fiber Acoustic

Panel U shape baffle in Selected Colour. The baffle blade shall be in size of 100 x 50 x

minimum 2400mm in approved shade with centre to centre spacing 100 mm. The baffle shall

be made by using polyester fiber acoustic panel thickness of 9 mm. The baffle blade shall be

suspended using slotted U-profile of required size and length (as per baffle length) having slots,

baffle Carrier, Marco Channel , threaded rod etc. Longer lengths of baffle to be connected by

baffle Joiner and the ends to be fixed with all material and labour etc Completed.

WOODEN CEILING WITH VENEER FINISH

Providing and fixing IS 710 12 mm thick Marine plywood false ceiling as per drawing

instruction , sample approved & complete with Aluminium anodised section size 50x50x1.5 mm

& 25x50x1.5 mm / GI frame work. the frame work fixed as per drawing @ 600 mm c/c. finish

with 4 mm thick Veneer with PU polish . Rate shall inclusive cost of making of all cutouts for

light fixtures, gadgets, gizmo, pelmets, grooves, CNC engraving , beads and also provide

support/template where ever required.The rate shall be in sq.mt for all floors and at all heights

including all costs . (or a sample mock of 5 Sqm minimum of the frame work and ceiling) shall

be approved from Architect. 5mm Groove shall be provided at the junction of the false ceiling &

the wall. ( considering all levels with require all Framing work and fitiing from RCC slab to false

ceiling level).

CARPET FLOORING

Providing and fixing carpet flooring using 250mm x 1000mm TILE TYPE CARPET of Nylon

type of Carpet of approved make, shade and pattern and of the following specification: of

65 thickness and density as mentioned in the drawings and approved by the architect as per the 2135.00 Sqm 1,333.20

samples approved, work complete as per the detailed drawings, approved sample,

specifications and instruction of Architect/EIC.Sample mock shall be approved from

Sr No Description QTY Unit Rate Amount

ALUMINIUM SKIRTING WITH ANGLE

Providing and Fixing of Aluminium Skirting as per approved make having width of 75 mm X

thickness of 2mm made out of 6063 Grade Aluminium alloy duly anodised as desired in the Ral

Colour code decided by the architect having neat screw fixed arrangement with Rubber seal

66 over it as per Manufacturers Specification. work complete as per the instruction of Architect. 150.00 Sqm 984.75

Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing

at all floors and for all leads,all accessories as described in item description.

Also, Providing & Fixing 3mm thick Aluminum Angle of Required size for Carpet & other

Flooring junction As per Flooring Drawings and detail etc. complete.

SLATTED WOOD WALL PANELING

Providing and fixing wall acoustical paneling using Ecotone or Equivalant PolySlatAcoustic

Panel make Slatted L-27 of size 400 MM X 2400 MM X 21 MM thick with the specification:-

Slatted L-27mm @12mm, high grade Pine wood base Medium Density Fiber acoustic boards

with Tongue & Groove Edge, The acoustic should be furnished with a Marco polyester fiber

67 acoustic panel backing with NRC: should be Up to 0.90, should meet the safety requirements 222.00 Sqm 4,999.50

of EN 14190. Then fixing Rock wool of 50 kg density and 50 MM Thick Fixing: -GI stud of size

48 X 34 X 36 X 3660 fixed vertical to wall at every 600mm c/c and floor of size 50 X 32 X 0.5 X

3600 fixed Horizontally with the help of noggin channel which is screw fixed directly to the wall

where ever required with Clip approved by Architect and as specified including all accessories,

material & labor complete as directed by Architect / Engineer – in – charge.

MARCO WALL PANELING

Providing and fixing wall acoustical paneling with using CS55 and IC 91 framing directly to the

wall and then fixing 10 mm Sonido wood fiber acoustic board with the help of screw and using

rock wool of 96 kg density and 50 MM thick between framing and Sonid sheet then Fixing

68 Ecotone or Equivalant make Marco polyester fiber acoustic wall paneling with the specification 235.00 Sqm 3,888.50

of 12 MM thick Grooved having density of 1.90 kg/m2 with NRC value of 0.85 surface matt

finish which is fixed with Nailfree silicon as required. The panel should have euro class B ASTM

E84-13 fire rating. The color shade of Panel as approved by Architect. Including all

accessories, material & labor complete as directed by Engineer.

MARCO BAFFEL CEILING (U SHAPE)

Suspended vertical linear baffle ceiling "Ecotone or Equivalant" make Polyester fiber Acoustic

Panel U shape baffle in Selected Colour. The baffle blade shall be in size of 200 x 27 x

minimum 2400mm in approved shade with centre to centre spacing 150 mm. The baffle shall

be made by using polyester fiber acoustic panel thickness of 9 mm. The baffle blade shall be

suspended using slotted U-profile of required size and length (as per baffle length) having slots,

baffle Carrier, Marco Channel , threaded rod etc. Longer lengths of baffle to be connected by

baffle Joiner and the ends to be fixed with all material and labour etc Completed.

PLY WORK FOR BACKING

Providing & Fixing 12mm Marine BWP Ply (IS 710) using SS Screws on Drywall Partition / C-

70 Stud Frame / Aluminum Frame / Wall etc. completed as per Drawing & as directed by the 1536.22 Sqm 2,274.52

Architect or Engineer in-charge.

LAMINATE PANELLING

1mm Laminate of Approved Make on Plywood etc. completed as per Drawing & as directed by

the Project Manager.

Providing and fixing in proper line and level 1mm Thick Laminate of approved make, shade &

color on partition / panelling by means of approved adhesives. Laminate should be fix on the

71 surface in such a manner that there will be no uneven, Undulation on Laminate surface. Avoid 764.00 Sqm 1,738.21

Bubble, damage edge, approved necessary grove, Work Also Including of All Lead & Lift, at All

Levels & Height, Transportation, etc. completed as per detail Drawing, Specification, Instruction

of Architect and Site In-Charge.

Rate of Marine Ply Panelling / Partition etc. will be paid separately under respective specific

Providing and laying PU (Polyurethane) paint finish on MDF and wall surfaces, complete in all

respects including surface preparation, application of primer/sealer coat, and 2 coats of PU

paint to achieve a smooth, durable, and uniform finish, as per architect's detail drawings and

specifications. Rate to include all materials, labour, tools, and scaffolding/staging as required,

complete to the satisfaction of the Architect/Engineer-in-Charge.

Providing and fixing of thick Plain MDF sheet fixed on wooden partition as per specified area on

detailed drawing. Work complete including all type of material, fittings, fixtures, Finish, loading,

unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails,

sample mockup, all floor, all levels, all heights etc. complete as per detailed drawings,

specifications & instruction of Client/EIC. only the clear elevation area shall be measured and

paid. sample mock shall be approved from Architect/Client.

Plain MDF: 12MM

Providing and fixing of thick Plain MDF sheet fixed on wooden partition as per specified area on

detailed drawing. Work complete including all type of material, fittings, fixtures, Finish, loading,

74 unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails, 192.00 Sqm 1,214.02

sample mockup, all floor, all levels, all heights etc. complete as per detailed drawings,

specifications & instruction of Client/EIC. only the clear elevation area shall be measured and

paid. sample mock shall be approved from Architect/Client.

Sr No Description QTY Unit Rate Amount

Plain MDF: 18MM

Providing and fixing of thick Plain MDF sheet fixed on wooden partition as per specified area on

detailed drawing. Work complete including all type of material, fittings, fixtures, Finish, loading,

unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails,

sample mockup, all floor, all levels, all heights etc. complete as per detailed drawings,

specifications & instruction of Client/EIC. only the clear elevation area shall be measured and

paid. sample mock shall be approved from Architect/Client.

Plain MDF: 25MM

Providing and fixing of thick Plain MDF sheet fixed on wooden partition as per specified area on

detailed drawing. Work complete including all type of material, fittings, fixtures, Finish, loading,

unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails,

sample mockup, all floor, all levels, all heights etc. complete as per detailed drawings,

specifications & instruction of Client/EIC. only the clear elevation area shall be measured and

paid. sample mock shall be approved from Architect/Client.

ACOUSTIC PANELLING

Providing and fixing wall acoustical paneling Fixing Ecotone or Equivalant make Marco

polyester fiber acoustic wall paneling with the specification of 12MM thick grooved panel & CNC

77 cut as per drawing provided by architect fixed with Nail free Silicon as required. The panel 1994.44 Sqm 4,055.15

should have euro class BASTME84-13 fire rating. The color shade & design of Panel should as

per approved by Architect. Including all accessories, material & labor complete as directed by

BACK PAINTED GLASS

Providing & Fixing 10mm thick Backpainted Toughned Glass with polished edges shall be fixed

on PLY Box with using Silicone as directed complete As per Details drawings given by

Architect. (Glass width and height shall be measured and paid)

FROSTED SPARKLING GLASS FILM

Providing and fixing frosted glass film of approved make Translucent, cast PVC, self-adhesive

vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised

designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed

by manufacturer. Rate shall be inclusive plotter cutting design as per Architect/Client

suggestion. Contractor shall provide shop drawing for approval of Architect/Client work

complete incuding all type of tools, tackles, scaffolding etc complete as per suggestion of

Architect/Client. If in case any application finishing will not as per satisfaction contractor shall

remove all film at their cost. Contractor shall do a sample mock of 5 Sqm minimum of glass

film) shall be approved from Architect/Client as per design.

Providing and fixing on wall 12mm thick approved quality soft board with cotton cloth/fabric of

approved make and shade on 12mm thick IS 710 ply 50 mm th approved Glass wool sheet

80 with PVC grip , as approved sample and as directed by EIC. The work shall be measured & 500.00 Sqm 1,612.97

paid in Sqm. for all floors, all level and at all heights including all costs .Only the clear elevation

area of the cloth/fabric shall be measured and paid. All the work complete as per the detailed

drawing , mockup sample and instruction of Architect/EIC.

Providing and fixing wooden pelmets of upto 150mm/200 mm x 450 to 600 mm L shape made

of 19mm thick ply as per IS 710 and beading of 4mm thick and 25mm wide Ghana Teak wood

for projection screen. Rate to be inclusive of lipping, cutting, wastages, necessary fixtures,

nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per drawing and

approved sample etc should also take load of all the all roller blinds.

GLASS PARTITION

Providing & Fixing of Otic-Particion make DG100 ie. Double glazed modular system consist of

Aluminium section of 25*100*1.5 mm thick. All sections duly anodised up to 15-20 microns with

6063-T6 grade and required accessories ie glass to glass aluminium I sections, T section &

82 degree sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall 250.00 Sqm 15,122.73

profile are 25 mm visible face and 100 mm wide with 12mm toughen glass & insertion of

thermoplastic gasket to adhere the glass firm & airtight.The sound reduction Value is from 44 to

49 Db. Rate includes supplying, fixing, cutting(as per requirement & design) & executing it on

WOODEN PARTITION

Providing & Fixing of Dual Slab Otic-Vetroin Self Bearing System Solid Partition of 60mm x

60mm U Channel mm with 12/19 mm thick prelaminated Low Density Fiberboard on both side

system with Rockwool insert with Tissue insert of 48Kg/M3 density for Sound reduction of

db.The aluminium system is of 6063 T6 Grade anodized with black/silver matt colour .The Solid

wall is full height of 3 mtr with or without Break possible. Internal framework comprising “U”

perimetral track in Aluminium provided with moulded extruded Thermostatic gaskets designed

83 to ensure insulation between partition panels, metal structure and masonry and Vertical posts 1035.00 Sqm 18,053.75

made out of Zinc Coated galvalised Steel. Vertical posts to be connected with Horizontal

profiles made Patented system fitted by snap locking into pre – prepared profile on the posts.

Both horizontals and verticals posts to be provided with gaskets snap fitted on the two fronts,

ensuring a snug fit and providing air tight and acoustic insulation between joints. System

comprises of Aluminium Starting profile of size 100mm x 25mm duly Anodized/Powder Coated.

The total system height is upto 3000mm.

Make: Otic / Kubik or equivalent

84 Technical Portal (100*100mm) on above item 60.00 No. 13,926.89

Sr No Description QTY Unit Rate Amount

ACOUSTIC RESISTANT PARTITION

154.0mm thick Gypwall Classic partition consist of GypSerra® or equivalent (“Patented in India

(325062)”) Metal framework partition having maximum reachable height of 5900mm satisfying

L/240 criterion at 200Pa, possessing fire rating of 60mins, tested in accordance to BS-476 Part

20 & 22 & sound insulation (Rw) of 56dB, tested in accordance to ISO 10140-2/ASTM E90 &

spectrum adaption term as per ISO 717-1, having Severe duty rating as per BS 5234 part

Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII,

100% recyclable, class 1 rated as per BS 476 -7 & strategic location of manufacturing plants

results in lower carbon emissions. Partition includes double layer of 15mm thick Gypboard® or

equivalent Plain consists of an aerated gypsum core encased in, and firmly bonded to strong

paper liners and conforming to IS 2095 Part 1:2023 Type A / EN 520:2004 Type-A, having

thermal conductivity 0.16w/m°k having flexural strength – {Longitudinal > 650N & transverse >

250N} on either side of the framing. GypSerra® or equivalent Metal frame work, in compliance

with BS EN 14195 & manufactured using CR1 Grade GI Sheet as per IS 513, having yield

stress of 300MPa & tensile strength of 340MPa with AZ150 finish abiding to IS 15961 & tested

85 for 500hrs of salt spray test as per ASTM B117 with a Global Warming Potential of 3.16 Kg 500.00 Sqm 4,536.92

CO2 per Kg from third party verified EPD as per ISO14025:2006, includes 92x34x36x0.5mm

GypSerra® or equivalent C-Stud with lip of 6.5mm and H-cutout on web enabling the services

to pass, having moment of inertia 115488mm4 about major axis, positioned at 610mm c/c in

94x32x32x0.5mm GypSerra® or equivalent Floor Channel & 94x32x32x0.5mm GypSerra® or

equivalent Ceiling Channel with flanges bend at 5° acute angle. Floor & Ceiling Channel is

anchored with Gyproc® or equivalent Rawl plug Ø8x45mm having Pull Out strength of 6.8KN

or Nail, fixed at 600mm c/c in zig zag manner. 92x40x40x0.5mm GypSerra® or equivalent

Noggin Channel to be placed between the studs, behind the horizontal board joint. Inner &

Outer layer of Gyproc® or equivalent Boards to be Screw fixed with Gyproc® or equivalent

Drywall Screw of 25mm & 50mm at spacing of 600mm & 300mm respectively. 50mm Saint-

Gobain Twiga Insul or EcoInsul Glasswool of mean density 20kg/m3, ISI marked, bio-soluble,

free from metal shots, complying IS 8183 shall be placed in Metal framework with the help of

Gyproc® or equivalent Holding Clip. Edges & joints to be finished with Gyproc® or equivalent

Pro-Fill JC conforming to ASTM C475 & Gyproc® or equivalent Paper tape. Periphery & cut-

outs of the partition to be treated with suitable Fire & Acoustic Sealant.

VENEER PANELLING

Providing and fixing 4 mm thick natural veneer of approved make and shade fixed over

approved substrate board mounted on aluminium as framework & ply as backing on frame

properly anchored to the wall with suitable fasteners at required spacing and pattern work as

per detailed drawings. The work shall include application of adhesive, fixing with headless

86 nails/screws, necessary edge finishing, sanding, and application of melamine polish in required 1100.00 Sqm 4,666.20

number of coats to achieve uniform finish, complete in all respects. The rate shall include all

materials of framework, fittings, fixtures, accessories, tapes, adhesives, transportation, loading,

unloading, scaffolding, labour, wastage, sample mock-up preparation and installation at all

floors, levels and heights, as per detailed drawings, specifications and instructions of the

Engineer-in-Charge.

CEMENT SHEET PANELLING

Providing & fixing 12mm thick fire retardant marine plywood as per IS 710:2010 and IS

5509:2000 fixed on frame work finish with 12mm thick Cement sheet & PU polish. The frame

work shall be made from square hollow aluminium anodised section size of 50x50x1.5 mm &

25x50x1.5 mm of approved make conforming to IS code. The framework shall be fixed as per

drawing vertically @ 600 mm c/c & horizontal 600 mm c/c horizontally. All ply/wooden shall be

treated with anti- termite treatment . Measurements for paneling work to be recorded upto

finished false ceiling level only irrespective of aluminium frame work, which shall be provided

from gr. level to RCC slab / beams soffit level. Rates shall also be inclusive of cost of making

CNC/engraving /cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills,

87 diffusers etc & providing additional sections for strengthening around the openings/cutouts 200.00 Sqm 9,674.79

additional support for fixing of patch fittings for doors, making grooves between wall & board, in

filled with termite treated wooden members if required or as per drawing /instruction of EIC. and

no extra payment shall be considered for additional sections provided. All curved surfaces,

recesses, waffles shall be part of the paneling including openable shutter wherever required

area and finished with the same material.Work complete including all type of material, fittings

fixtures, Finish, loading , unloading , transportation, all leads ,accessories, groove, adhesive

,tape, headless nails, sample mockup, all floor , all levels, all heights etc complete as per

detailed drawings ,specifications & instruction of Client/EIC. only the clear elevation area of

finished plywood wall paneling with Cement sheet shall be measured and paid. sample mock

shall be approved from Architect/Client.

ARTIFICIAL GRASS

Providing and laying UV-stabilized artificial/synthetic turf grass of approved make, colour

(natural green with brown thatch blend) and pile height 30–35 mm, tufted on

polypropylene/polyethylene monofilament yarn with latex/polyurethane backing and permeable

drainage holes, having minimum density 16,000–20,000 tufts/sqm, laid over the existing

finished, waterproofed and screeded terrace/podium deck surface after cleaning the surface of

debris, sharp projections and ponding without disturbing the existing waterproofing membrane,

including providing a protective underlay/shock pad or geotextile separation layer over the

waterproofed surface for cushioning and drainage, rolling out the turf rolls in a uniform pile

88 direction, cutting and fitting neatly around table and chair bases, glass railing posts, drainage 15.00 sqmt 1,610.95

outlets, expansion joints and terrace parapets/edges, jointing adjacent rolls with jointing tape

and adhesive to form seamless, gap-free joints, fixing the perimeter with adhesive bonding

and/or a low-profile mechanical edge trim without penetrating the terrace waterproofing, infilling

with silica sand at 2–4 kg/sqm brushed into the pile for ballast and drainage while keeping

existing rainwater outlets/scuppers clear and functional, and power-brushing/grooming the

entire laid area to achieve a natural, uniform standing-pile finish with unobstructed free flow of

rainwater to the terrace drains, complete with all materials, labour, tools and plant, and testing

for proper fixing, drainage and finish — complete as required, for terrace landscaping/amenity

Sr No Description QTY Unit Rate Amount

WOODEN FLUTED PANEL

89 Providing and fixing pre polished Wooden Fluted Panel of any color as per design selection by 150.00 Sqm 1,388.75

architect or detail drawing by architect upto any height or any floor.

HONEYCOMB BLINDS

Supply and fixing Good quality Manual window Honey Comb blinds of approved shade &

makes with scoth gaurd fabric protector.The blinds should be approved by Architect or

client.Black out Curtains sould be solar, light & UV Transmission is Zero %.

BLACKOUT ROLLER BLINDS

Providing and Fixing Roller Blinds approved shade of 38mm round Aluminum channel with

Blackout Fabric & tilting with SS chain (Ball) system with all necessary fixtures and fitting Rate

91 also including of all lead and lifts, Packing, Loading, Unloading, Transportation, Installation, etc. 3168.00 #REF! 4,555.10

completed as per detail drawing, Specification instructions of architect and site in charge.

(Sample to be final by Engineer In-charge prior execution of work) (on Glass partition &

Providing and fixing approved make decorative wallpaper of approved shade, texture and

pattern as selected by the Architect, on prepared wall surface and/or plywood/MDF cladding,

92 including necessary surface preparation, adhesive, cutting, matching, finishing, labour, 5500.00 #REF! 2,333.10

materials and all accessories complete as per manufacturer's specifications and Architect's

Trap Door (For IDU Ductable Units) Door shall be made of Aluminium Box Pipe of

50mmX25mmX2mm with one side 9mm ply and other side 6mm ply of 710 Grade + 1mm

Laminate fixed on both side of shutters including teak wood beading on edges. The Main

Frame around Doors shall be of Alu Pipes / C-Studs and Marine Ply with Necessary Alu pipe

supports / 10mm Threaded Rods from True Slab using Angle Cleat & Anchor Fasteners of

approved make. Job shall be inclusive of necessary hardwares i.e. Heavy butt hinges, allen

key, safety chain, magnet. The Rate shall include providing necessary staging / Scaffolding, all

lead and lift, at all level & Height etc. completed as per Dwg & as directed by the Project

Providing and fixing in position commissioned art works inside the building on the wall or ceiling

and extension of the same till floor/ceiling. The composition of the commissioned art work shall

be from any type of wood, metal like copper, brass, SS, MS, fabric, polycarbonate sheets,

acrylics, rubber, plastic, tough boards, cementatious boards, fibers, gypsum, POP etc. all. The

form of material may also very based on material properties like sheets, wires, blocks, inclusion

of cutouts, bending of the materials, profile cutting an shaping of the materials, manufacturing

at site as well as at site, covering the prepared material by means of the bubble sheets, jute

bags or in wooden packing materials. The commissioned art work may require any shade,

finish and texture of duco painting, specialty painting, PU painting, general painting to paintable

surfaces, galvanizing, powder coating, anodizing etc.. The base surface where the

commissioned art work is to be installed also needs some modification to enhance the effect of

art works. The use of material like fiber glass wool/ boards, filler fabric, mounting material may

also essential based on the design of the art work by artist. The rate shall be inclusive of any

type of lighting features to be added into it includes LED lights, neon lights including its

supporting and suitable wiring for the same within the art works. Only one electrical control point

94 connection will be given as close to art works. The rate shall be inclusive of making necessary 250.00 Sqm 16,123.64

provisions within the commissioned art works of fixing of the same. The provisions of the fixing

of the art work may be in parts but it shall be inclusive of the all arrangements like LN key,

studs, anchors, nuts and bolts etc. all.. The concept of the art work will be generated by

architect and interior designer and based on that offers from the artists to be invited for design

and execution of the artwork. The selection of the artist is to be done by architect and interior

designer only. Main contractor is bind to follow the methodology suggested by architect and

interior designer to be followed for development of commissioned art work. The overall outline

area covered by art work is to be considered for the measurement instead of actual area of art

work. Deductions of the internal cutouts, spaces in between of the art work shall not be made.

Since there is huge variance in types of the commissioned art works, the same is to be

completed in all respect inclusive of the materials and methodology is stated above and may

not be. For any additional materials, process, methodology no extra payments shall be made.

The quotations of the artist shall be got approved in advance including area of the proposed art

works. Total payment of the artwork will be done as per basic rate and difference between

actual cost per sqm and basic rate per sqm will added or deducted without any consideration of

the, overhead and profit over the difference. It is the responsibility of the main contractor to

PAINTING WITH FRAME WORK

Providing and fixing Painting with WPC frames for artwork/paintings of approved profile and

design. Frame size and painting size shall be as per Architect's selection and approved

95 drawings. Frame shall be finished in approved colour, Finish and shade. Necessary backing 150.00 Sqm 15,887.30

board, hanging hardware (heavy-duty key-hole chaplas), fixtures and accessories shall be

provided complete. Rate shall include all materials, labour, cutting, fixing, finishing, wastage,

transportation, tools & tackles and all incidental works complete as directed by the Architect.

Providing and fixing standard Logo using virgin acrylic or other material like Colored

HDF/cementsheet /SS plate with CNC work complete as per architect selection , letters as per

detailed drawings and fixed with approved adhesive with necessary fittings and provision shall

be made for conceal LED light as per detail drawing. (logo size will be aprox. Size - upto

Sr No Description QTY Unit Rate Amount

PLY BOXING FOR INDOOR UNITS OF HVAC

Providing and fixing ply box work of upto 100mm clear depth (internal) and required height

made from 19mm thick 100 mm ply for depth &12 mm ply as cover as per IS 710 with beading

of 4mm thick of required width of Ghana Teak wood at all the exposed edges of ply for

mounting HVAC indoor units and for taking copper pipes, drain pipes & electrical cables, as per

drawing & approved sample etc. Framework to consist of 19 mm ply of 100mm thickness @

spacing for the same to be at every 600 mm c/c vertically & 1200mm c/c horizontally. At joint of

front ply 2 no of stiffener of 19 mm ply shall be placed side by side Rate to be inclusive of

lipping, cutting, wastages, necessary fixtures required angle cletas37x37x3 mm screws, nails,

catch bolts, justi nails adhesives, necessary scaffolding, tools and fixing at all heights and for all

floors etc but excluding fixing veneer or laminate and polishing. it shall be measured in sqm of

elevation area.

HEAVY DUTY DOORMAT AT BUILDING ENTRANCE

Supply and installation of heavy-duty recessed aluminium entrance matting suitable for high-

traffic commercial lobby/entrance areas, comprising extruded aluminium profile rails (mill finish

or anodized silver) interlocked with a continuous hinge system to allow flexibility over curved

layouts, fitted with grey ribbed carpet/PVC/rubber scraper inserts (slip-resistant, fire-rated to

Class B1/Euroclass Bfl-s1 or equivalent) for effective removal of dirt, dust and moisture from

foot traffic. The matting shall be custom cut to follow the curved entrance geometry as per site

layout (matching revolving door and swing door combination), and shall be recessed into a

formed matwell/pit of matching depth (typically 15–20mm), finished flush with the finished floor

level (FFL), and bordered all around with an aluminium edge trim. The matwell shall include

drainage provision if required for the wet-scrape zone. Make: COBA Europe / Gradus or

equivalent approved make, with standard manufacturer warranty.

Supply, installation, testing and commissioning of fully automatic wall-mounted hand dryer with

stainless steel (SS # 304 Grade) casing, of size 200mm (W) x 152mm (D) x 280mm (H),

certified as per IS 3300-2:2009 with BIS License No. 9512572124. The unit shall be infrared

sensor operated (automatic, touch-free) with a sensor detection range of 10–12 cm and an

auto cut-off feature of 60 seconds. It shall be fitted with a HEPA filter and a brush-type AC

motor with a rated speed of 30,000 RPM, delivering an air speed of 100 m/s and a blowing

volume of more than 270 m³/hr, capable of drying hands in less than 30 seconds. The unit shall

have a total rated power of 1200 W (comprising a 550 W motor and 650 W heating element),

suitable for 220V input supply, with an IPX3 protection rating against water ingress. The hand

dryer shall come with a manufacturer's warranty of 1 year each on the PCB, heating element,

and brush motor, and shall be provided complete with all mounting accessories, fixtures, and

necessary electrical connections as required for a fully functional installation, in accordance

with manufacturer specifications and as directed by the Engineer-in-Charge.

SHOE SHINING MACHINE

Supply, installation, testing and commissioning of automatic shoe-shining machine with sole

cleaning function, of make Dolphy or equivalent, construction in stainless steel and wood, silver

finish, having overall dimensions of 510mm (L) x 320mm (B) x 425mm (H). The machine shall

be fitted with rotating brushes for shining and sole-cleaning brushes, and shall be provided with

cream application facility in three shades (Black, Brown and Cream) with a cream tank capacity

of 200 ml each, suitable for black and brown formal leather shoes. The unit shall be powered by

a single-phase AC motor with a rated power of 40 W, operating on 230V AC ± 10%, 50Hz

supply, and shall incorporate an auto shut-off feature of 15 seconds. The machine shall be

provided complete with all mounting accessories, fixtures and necessary electrical connections

required for a fully functional installation, in accordance with manufacturer specifications and as

directed by the Engineer-in-Charge.

INVISIBLE BIRD NET

Providing and fixing Pigeon Control Invisible Grill system using SS 316 grade stainless steel

wire rope of minimum 2.0 mm diameter, installed with wire spacing not exceeding 50 mm (2

inches) c/c, including all necessary aluminum/stainless steel supporting members, anchor

fasteners, ferrules, turnbuckles, clamps, fittings, and accessories required for complete

101 installation. The system shall be corrosion-resistant, weatherproof, and designed to prevent 3888.00 Sqm 1,794.77

entry, roosting, and nesting of pigeons and other birds without obstructing natural light,

ventilation, or external view. The work shall include supply of all materials, labor, drilling,

anchoring, tensioning, alignment, scaffolding (if required), testing, cleaning, transportation, and

making good any damages, complete upto any floor & in all respects as directed by the

Engineer-in-Charge.

designing, Supplying, and fixing approved Floor Directory and Wayfinding Signage Board for

Building, comprising floor-wise departmental details, room numbers, facility information,

directional signage, legends, symbols, colour-coded floor plan layout and “You Are Here”

location indicator, including preparation of artwork, high-resolution UV digital printing on

approved ACP/Acrylic/PVC substrate with protective laminated finish, complete with all

necessary mounting hardware, SS spacers, fasteners, transportation, labour, installation and

commissioning at site as per approved design or as per architect selection and directions of the

Engineer-in-Charge, complete in all respects.

Providing, fabricating, supplying, and fixing Stainless Steel (Grade SS 304) Project Name

Letters, up to 900 mm in height, in approved font style, design, finish, width, and thickness, as

per drawings and as approved by the Architect/Engineer-in-Charge. The work shall include all

necessary supports, brackets, fasteners, anchoring arrangements, hardware, welding,

polishing, finishing, and installation complete in all respects to achieve a neat, durable, and

aesthetically satisfactory appearance.

Sr No Description QTY Unit Rate Amount

Providing and placing healthy live indoor ornamental plants of approved species such as Areca

Palm, Snake Plant, ZZ Plant, Peace Lily, Aglaonema, Dracaena or equivalent, having minimum

height of 600 mm to 1500 mm as specified, supplied in decorative FRP/ceramic planter pots of

104 approved size, complete with growing media, manure, watering, transportation, placement at 50.00 No. 1,742.25

designated locations and maintenance during the defect liability period, complete in all respects

as per section by Architect and as directed by the Engineer-in-Charge.

Areca Palm (12"-14" POT Size)

Providing and placing healthy live indoor ornamental plants of approved species such as Areca

Palm, Snake Plant, ZZ Plant, Peace Lily, Aglaonema, Dracaena or equivalent, having minimum

height of 600 mm to 1500 mm as specified, supplied in decorative FRP/ceramic planter pots of

105 approved size, complete with growing media, manure, watering, transportation, placement at 50.00 No. 871.13

designated locations and maintenance during the defect liability period, complete in all respects

as per section by Architect and as directed by the Engineer-in-Charge.

Snake Plant (Sansevieria) (8"-10" POT Size)

Providing and placing healthy live indoor ornamental plants of approved species such as Areca

Palm, Snake Plant, ZZ Plant, Peace Lily, Aglaonema, Dracaena or equivalent, having minimum

height of 600 mm to 1500 mm as specified, supplied in decorative FRP/ceramic planter pots of

106 approved size, complete with growing media, manure, watering, transportation, placement at 50.00 No. 1,161.50

designated locations and maintenance during the defect liability period, complete in all respects

as per section by Architect and as directed by the Engineer-in-Charge.

ZZ Plant (8"-10" POT Size)

Providing and placing healthy live indoor ornamental plants of approved species such as Areca

Palm, Snake Plant, ZZ Plant, Peace Lily, Aglaonema, Dracaena or equivalent, having minimum

height of 600 mm to 1500 mm as specified, supplied in decorative FRP/ceramic planter pots of

107 approved size, complete with growing media, manure, watering, transportation, placement at 50.00 No. 871.13

designated locations and maintenance during the defect liability period, complete in all respects

as per section by Architect and as directed by the Engineer-in-Charge.

Peace Lily (8"-10" POT Size)

Providing and placing healthy live indoor ornamental plants of approved species such as Areca

Palm, Snake Plant, ZZ Plant, Peace Lily, Aglaonema, Dracaena or equivalent, having minimum

height of 600 mm to 1500 mm as specified, supplied in decorative FRP/ceramic planter pots of

108 approved size, complete with growing media, manure, watering, transportation, placement at 50.00 No. 1,393.80

designated locations and maintenance during the defect liability period, complete in all respects

as per section by Architect and as directed by the Engineer-in-Charge.

Rubber Plant (10"-12" POT Size)

Providing and placing healthy live indoor ornamental plants of approved species such as Areca

Palm, Snake Plant, ZZ Plant, Peace Lily, Aglaonema, Dracaena or equivalent, having minimum

height of 600 mm to 1500 mm as specified, supplied in decorative FRP/ceramic planter pots of

109 approved size, complete with growing media, manure, watering, transportation, placement at 50.00 No. 4,065.25

designated locations and maintenance during the defect liability period, complete in all respects

as per section by Architect and as directed by the Engineer-in-Charge.

Ficus Lyrata (Fiddle Leaf Fig) (12"-14" POT Size)

Providing and placing healthy live indoor ornamental plants of approved species such as Areca

Palm, Snake Plant, ZZ Plant, Peace Lily, Aglaonema, Dracaena or equivalent, having minimum

height of 600 mm to 1500 mm as specified, supplied in decorative FRP/ceramic planter pots of

110 approved size, complete with growing media, manure, watering, transportation, placement at 50.00 No. 871.13

designated locations and maintenance during the defect liability period, complete in all respects

as per section by Architect and as directed by the Engineer-in-Charge.

Aglaonema (8"-10" POT Size)

Providing and placing healthy live indoor ornamental plants of approved species such as Areca

Palm, Snake Plant, ZZ Plant, Peace Lily, Aglaonema, Dracaena or equivalent, having minimum

height of 600 mm to 1500 mm as specified, supplied in decorative FRP/ceramic planter pots of

111 approved size, complete with growing media, manure, watering, transportation, placement at 50.00 No. 1,742.25

designated locations and maintenance during the defect liability period, complete in all respects

as per section by Architect and as directed by the Engineer-in-Charge.

Dracaena Massangeana (10"-12" POT Size)

SUB TOTAL - 2 - ₹

Sub Head - 3 - ROAD

Box cutting the road surface to proper slope and camber for making a base for road work

1 including removing the excavated stuff and depositing on the road side slope as directed upto 1430.25 Cum 102.93

Construction of granular sub base naturally available material of (26.50 to 9.50 mm) size 35%,

(9.50 to 2.36 mm) size 25 % and mix with sand or equivalent finer particle at 40 % (below

mm size) so as provide well graded Grade II Material, spreading in uniform layers on prepared

surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory

rollers of 80 to 100 kn static weight to achieve the desired density, complete as per technical

specification clause 401 for grading machined in table 400.1 (CBR 20 or more)

Wet Mix Macadam (WMM)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam

specification including trimix the materials with water at OMC in mechanical mix plant carriage

of mixed materials by tipper to site laying in uniform layers (Layer should not be more than

mm)with paver in sub base/base course on well prepared surface and camber with Sensor

paver consolidation by vibratory road roller to achieve the desired density by using machine

crushed chips as per required gradation mixing with required optimum quantity of water incl

material, labour, plant and machinery and equipment etc. complete.

Sr No Description QTY Unit Rate Amount

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete including cost of formwork in (A)

Foundation and Plinth

Providing and laying in position Ready Mixed M-30 grade concrete for reinforced cement

concrete work, using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all lead up to AUDA

site having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of

laying, including the cost of centring shuttering finishing and excluding the cost of reinforcement

including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength and durability including curing

etc. complete as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) (Cement level 475 kg) for Foundation

Labour charges for laying R.C.C. floor of concrete (Trimix) to be concreted in alternate panels.

The panel shall be formed on four sides with M.S. channel bolted in position for forming the

size. The entire concrete mass shall be vibrated with skirt vibrator and needle vibrator so as to

bring out slurry on top and smooth finished integrally as per instruction of Engineer in charge

using vaccume de watering system as per Manufacturer's specification including applying "Nito

floor Hardtop" or equivalent (Fair create, sikka applied at the rate of 4.5 kg/10 Sq.m on R.C.C.

floor as per Manufacturer's specification) after base concrete has stiffened to the point when

light foot traffic leaves an imprint of about 3 mm. Any bleed water should have evaporated

including fixing expansion joints with 20 mm thick salitex board fitting, joint cutting, filling

bitumen, curing etc complete as per instruction of site Engineer. Excluding steel & including

form work with all tools, plants, Machinery and all cost of chemical required for Trimix concrete

including Groove Cutting 4 to 5 mm wide and 60mm Deep at every 4 m Distance.

Providing and fixing TMT Bar FE 500D reinforcement for R.C.C. work for all floor including

cutting, bending, binding and placing in position etc. complete

Providing and laying shot/Sand blasted multi colour interlocking & Non-interlocking paving

blocks of high density 60 To 80 mm thick M-35/40 grade as per the instructions for footpath,

parking area, service lane and other areas as specified by the engineer in charge. Rate also

includes excavation with compaction up to 30 cm and removal and carting of the same up to

mm sand bedding . The work of the paving blocks shall be done in line and level. It should be

laid in such a way that the no cutting of the paver block to be necessary. paver blocks shall be

mechanically compacted and shall be re laid if necessary. As per Given Detail Drawings &

Selection by Architect (Vyara or equivalent make)

Providing & fixing M25 grade of concrete precast (factory made) exposed/ fare finish kerb

stones, bollard, coping etc of approved make and as per approved sample of any size and

shape. Kerb, bollard shall be fixed on the foundation prepared of M15 grade concrete including

joining, curing, formwork (if required for base) etc. complete. The rate shall also include the

9 flush pointing in CM (1:2) for all joints of the kerb stones. The contractor rate shall also include 1232.83 Rmt 1,024.72

the cost of excavation, base PCC M15 grade and finish good, curing etc complete as directed

by Architect and engineer in charge. The rate shall be for unit of Cum of kerb, bollard volume.

Sample and mock-up shall be approved by Architect before execution.. (Vyara or equivalent

Supplying and fixing cat eye (Stim Sonite) made out from Acrilo beautile sterine injuction high

10 compressed moulding with reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) 219.00 Each 217.40

provided with bituminous adhesive 100g. with each unit for fixing. (High Intensity grade)

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux

and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

Providing and Fixing ABS Plastic SPEED BUMP of Size :‐ 750 MM x 250MM x75 MM, Per Mtr #

12 4 Nos (2 black, 2 yellow),TOP DESIGN – LINE DESIGN ANTI SKID PATTERN FOR GRIP 30.00 Rmt 1,701.67

filling CEMENT INSIDE etc. complete as directed by Engineer‐in‐charge.

SUB TOTAL - 3 - ₹

Sub Head - 4 - UNDER GROUND SUMP

Sr No Description QTY Unit Rate Amount

"Preparing structural design of RCC Under Ground / Partially under ground / above high ground

level Reservoir of required capacity as per relevant I.S. standards and constructing the same,

including excavation in all types of soil strata (including rock) including shoring strutting if

required, for loose soil / to protect from collapse, casting 100 mm thick P.C.C. levelling course

in M- 15, Refilling the pit with proper soil and disposing of the surplus stuff at all lead. Including

cement plaster in CM 1:2 with approved water proofing compound to all over inside container

(i.e. walls, base, top slab/dome bottom etc. all). Including all types

of labour and material charges of lowering, laying, erecting / hosting and jointing of pipe

assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic design.

Providing and fixing accessories, CI Manhole frame and cover, water level indicator, adequate

cowl type ventilators or lantern type ventilator with stainless steel jail. RCC chambers for

valves. Providing and applying three coats of cement paint / snowcem to the out side face of

structure. It also includes satisfactory water

tightness test as per relevant I.S. code and painting name of scheme and capacity on the tank

as per direction of engineer in

1 List of Indian Standards for Design of GSR / SUMP:- 2.00 Each 3,80,598.13

The structural design of GSR shall be in accordance with provisions relevant I.S standards

(1) I.S. 3370 part I & II 2009 or Its latest revision

(1.1) I.S. 3370 part III & IV 1965 or Its latest revision

(2) I.S. 456 – 2000 or Its latest revision.

(3) I.S. 1893 – 2000 – 1984 or Its latest revision.

(4) I.S. 875, Part – 1 to 3, 1987 or Its latest revision.

General Specifications:-

(1) Water depth in container shall be adopted as per data of tender. Capacity shall be

calculated excluding free board of the

reservoir. If water depth is not specified, the suitable water depth / acceptable to field engineer

in accordance with hydraulic

requirement (2) Shape of schoanltl abine eard (oinp tpeladn f)o rs pceacpiaficeidty .by in data

shall be adopted in absence circular shape shall be adopted.

(3) Size shall be fixed as per availability of space (land area) at site / acceptable engineer in

(4) Effect of overlapping of pressure bulbs on soil due near by structure and proposed sump

SUB TOTAL - 4 - ₹

Sub Head - 5 - COMPOUND WALL

Boring holes 3.5m deep in ordinary soil (for cast in situ piles) and getting out the soil and

1 disposal of the surplus excavated soil as directed within a lead of 50 metre for following 230.00 Each 1,524.09

diameter of piles (iii) 300 mm

Excavation for foundation executed with manual labour up to all depth including sorting out and

2 stacking of useful materials and disposing off the excavated stuff up to all lead and lift as 111.54 Cum 117.08

directed by engineer in-charge. (A) Loose or soft soil

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete including cost of formwork in (A)

Foundation and Plinth

Provinding and Laying controlled cement concrete M-250 including finishing smooth with curing

complete excluding the cost of form work and reinforcement for reinforced concrete work in

foundations, footings, base of columns and mass concrete.

Provinding and Laying controlled cement concrete M-250 including finishing smooth with curing

5 complete including the cost of form work but excluding the cost of reinforcement for reinforced 53.13 Cumt 5,834.77

concrete work in Beam for all floors.

Providing and laying cement concrete 1:1.5:3 (1- Cement : 1.5- Coarse sand : 3- crushed stone

6 aggregates 20 mm nominal size) and curing complete including cost of formwork and excluding 26.57 Cumt 8,294.12

the cost of reinforcement for all floors in (A) Wall Caps / Coping (compound Wall)

Provinding and Laying controlled cement concrete M-250 including finishing smooth with curing

7 complete including the cost of form work but excluding the cost of reinforcement for reinforced 49.68 Cumt 7,481.07

concrete work in columns for all floors.

Providing and laying controlled cement concrete M-250 and curing complete including the cost

8 of formwork and excluding the cost of reinforcement for reinforced concrete work in slabs for all 4.80 Cumt 6,577.12

Providing and fixing TMT Bar FE 500D reinforcement for R.C.C. work for all floor including

cutting, bending, binding and placing in position etc. complete

Masonary work using Aerated light weight concrete block having crushing strength not less

than 35 kg/sqcm for super structure above plinth level upto all floor level with required chemical

(as approved by engineer in-charge) used for the bonding complete as per Technical

Providing and applying textured plaster finish on exterior wall surfaces using approved high-

performance textured plaster material of specified grade, pattern, and shade. The surface shall

be thoroughly cleaned and prepared by removing dust, loose particles, and laitance, ensuring a

smooth and stable base. A suitable primer shall be applied before plastering. The textured

plaster shall then be applied using a trowel, roller, or spray method to achieve the desired

decorative finish such as rustic, swirl, drag, vertical, or any specified texture. The material shall

be UV-resistant, weatherproof, breathable, anti-fungal, and suitable for varying climatic

11 conditions. The final surface shall be uniform, crack-free, and visually consistent throughout. 3828.44 Sqm 1,466.52

The scope includes all necessary materials, tools, labour, scaffolding, curing (if applicable), and

cleaning of the site after completion. Work shall be carried out in accordance with details as per

drawing and the approved sample by architect and Make, and as directed by the

Architect/Engineer-in-Charge. Rate to include complete preparation, application, and finishing

of textured plaster on exterior walls in all respects.

Note: Including 20MM Mala Plaster consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) under texture.

Sr No Description QTY Unit Rate Amount

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position

and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters,

12 purlins connected to common rafters and the like, with two coats of paint on new steel and 7560.78 Kg 91.16

other metal surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleaning the surface of all dirt, dust and other

foreign matter.

Providing and fixing of 9 Nos of Barbed wire (12X14) and 600 mm dia Coil (Tata Make) on M.S.

13 Angle posts including fixing in position as per detailed drawing and as approved and directed by 590.36 Rmt 365.62

engineer-in charge.

Providing and fixing S.S. roller of size 70-100 mm dia with 36-50 mm wide and minimum weight

14 of 1500-2000 gm/no fixed to MS framework for slide movement of Gate fabrication movement 8.00 Each 999.90

including nut and bolts with 40 x 5 mm G.I. sheet as per direction of Engineer-In-Charge.

SUB TOTAL - 5 - ₹

Sub Head - 6 - SECURITY CABIN

Excavation for foundation by machineries / executed with mechanised efforts up to all depth

1 including sorting out and stacking of useful materials and disposing off the excavated stuff up to 80.76 Cum 208.17

all lead and lift as directed by engineer in-charge.(A) loose or soft soli

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

2 layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and 64.60 Cum 130.39

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete including cost of formwork in (A)

Foundation and Plinth

Provinding and Laying controlled cement concrete M-250 including finishing smooth with curing

complete excluding the cost of form work and reinforcement for reinforced concrete work in

foundations, footings, base of columns and mass concrete.

Provinding and Laying controlled cement concrete M-250 including finishing smooth with curing

5 complete including the cost of form work but excluding the cost of reinforcement for reinforced 5.60 Cumt 5,834.77

concrete work in Beam for all floors.

Provinding and Laying controlled cement concrete M-250 including finishing smooth with curing

6 complete including the cost of form work but excluding the cost of reinforcement for reinforced 6.12 Cumt 7,481.07

concrete work in columns for all floors.

Providing and laying controlled cement concrete M-250 and curing complete including the cost

7 of formwork and excluding the cost of reinforcement for reinforced concrete work in slabs for all 4.96 Cumt 6,577.12

Providing and laying controlled cement concrete M-250 and curing complete including the cost

8 of formwork and excluding the cost of reinforcement for reinforced concrete work for all floors in 0.56 Cum 7,738.72

Lintel and sill

Providing and fixing TMT Bar FE 500D reinforcement for R.C.C. work for all floor including

cutting, bending, binding and placing in position etc. complete

Masonary work using Aerated light weight concrete block having crushing strength not less

than 35 kg/sqcm for super structure above plinth level upto all floor level with required chemical

(as approved by engineer in-charge) used for the bonding complete as per Technical

Providing 15mm thick cement plaster in a single coat on the Rough (Similar) side of single or

half brick/block/RCC walls for interior plastering for all floors and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement:4-sand), including fixing 150 mm wide galvanised Chicken wire

plaster mesh in mesh size 16mm x 16 mm and Maximum GI wire gauge of 24 fixed at every

RCC and Brickwork joint including labour and material, etc. complete as directed by engineer in-

Providing and applying textured plaster finish on exterior wall surfaces using approved high-

performance textured plaster material of specified grade, pattern, and shade. The surface shall

be thoroughly cleaned and prepared by removing dust, loose particles, and laitance, ensuring a

smooth and stable base. A suitable primer shall be applied before plastering. The textured

plaster shall then be applied using a trowel, roller, or spray method to achieve the desired

decorative finish such as rustic, swirl, drag, vertical, or any specified texture. The material shall

be UV-resistant, weatherproof, breathable, anti-fungal, and suitable for varying climatic

12 conditions. The final surface shall be uniform, crack-free, and visually consistent throughout. 226.16 Sqm 1,466.52

The scope includes all necessary materials, tools, labour, scaffolding, curing (if applicable), and

cleaning of the site after completion. Work shall be carried out in accordance with details as per

drawing and the approved sample by architect and Make, and as directed by the

Architect/Engineer-in-Charge. Rate to include complete preparation, application, and finishing

of textured plaster on exterior walls in all respects.

Note: Including 20MM Mala Plaster consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) under texture.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

13 required shape even shade after thoroughly brushing the surface to remove all dirt, and 347.04 Sqm 114.53

remains of loose powdered materials. Etc complete

Providing and laying 16-18 mm (average) thick Polished Granite stone (Aadhunik Brown

Granite as approved by Architect) flooring & skirting in required design and patterns, in linear as

well as curvilinear portions of the building, all complete as per the architectural drawings, stone

14 slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid 34.16 Sqm 3,101.76

and jointed with cement slurry and pointing with white cement slurry admixed with pigment of

matching shade, including rubbing, curing and polishing etc. all complete at all floor levels as

specified and as directed by the Engineer-in-Charge.

Sr No Description QTY Unit Rate Amount

Providing and fixing 16-18 mm (average) thick Granite stone slab (Aadhunik Brown Granite or

Similar as approved by Architect) gang saw cut, mirror polished, remoulded and prepolished,