Laying and Fitting of Rising Main, distribution including interconnection and other allied works for improvement of water supply Masjid Mohalla Abida under WSS Dandani including testing and commissioning (Capex Budget).

Amount

Dismentling of G.I.pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 metres lead: 15mm to 40mm nominal bore

Above 40mm nominal bore

Earth work in excavation by manual means in tranches for foundation, drains, pipes, cables etc. (Not exceeding 1.5m in width) and for shafts, wells, cess pits and the like not exceeding 10 Sqm on plan, depth upto 1.5m, including disposal of excavted earth upto 1 mtr from cutting edge, disposal earth is to be levelled and neatly dressed in: all kinds of soils.

Laying and Fitting of G.I.pipes complete excluding cost of pipe and earth work. 80mm dia G.I.pipe (M)

65mm dia G.I.pipe

50mm dia G.I.pipe

40mm dia G.I.pipe

20mm dia G.I.Pipe

Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and left upto 1.5mtr. (Deduct for not rolling and watering the excavated earth).

Welding of G.I. Pipe including testing of joints, carriage of welding set, cost of electrods and electric connection/Generator set complete job. (80mm dia G.I.Pipe joint)

(65mm dia G.I.Pipe joint)

(50mm dia G.I.Pipe joint)

Fixing of Check/Sluice valve in Rising Main line including cost of flanges, Nut bolts, washer etc. and welding of flanges. (Complete job) 80mm dia

Fixing of G.M gate valves including bends, collars, unions & other allied items 50mm dia to 80mm dia

25mm dia to 40mm dia

Making interconnection of distribution branches with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipes etc. complete job. a) 50mm to 80mm nominal bore.

b) 15mm to 40mm nominal bore.

Providing and laying in position cement conc. Of sepcified grade excluding cost of Centering & Shuttering all work up to plinth level 1:4:8 (1 Cement: 4 Coarse sand: 8 graded crused stone aggregate 40mm nominal size.

providing and laying in position cement conc. Of sepcified grade excluding cost of Centering & Shuttering all work up to plinth level 1:3:6 (1 Cement: 3 Coarse sand: 6 graded crused stone aggregate 20mm nominal size.

Supplying of stone/boulder (nallah) nominal size 225mm (stack measurement reduced by 20%),

Dumping stone excluding cost of stones. In horizontal on level.

Providing and laying cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level in 1:2:4 (1 Cement: 2 Coarse sand: 4 graded crused stone aggregate 20mm nominal size.

Labour engaged for cleaning of happers with brushes and disposal of unserviceable material.

Centering and shuttering including strutting, propping etc. and removal of form for:- a) Foundations, footings, bases of columns etc. for mass concrete.

Cement conc. flooring 1:2:4 (1 cement: 2 Coarse sand: 4 graded crushed stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of noising of steps etc. complete (40mm thick with 20mm nominal size crushed stone aggregate).

Carriage of materials from nearest source to site of work including loading/unloading and stacking complete in all terrains a) Sand 70Km from nearest source to road side of work by M.T. and 100mtr from road side to site of work by H.L.

b) Stone agg. below 40mm nominal size 1Km from nearest source to road side of work by M.T. and 100mtr from road side to site of work by H.L.

c) Stone agg. 40mm nominal size & above 1Km from nearest source to road side of work by M.T. and 100mtr from road side to site of work by H.L.

d) Stone 500mtr from nearest source to site of work by H.L

SHIV SARAN GUPTA