Kerala

Active

Works

Electrical Works

GENERAL Electrical repair and renovation works in Kannannur LIS Electrification General Electrical Work

Irrigation Department

Chalakkudy | Thrissur, Kerala

Amount: ₹6.4 LCloses: 23 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Closes23 Oct 2026
Bid Opening26 Oct 2026

Tender Value

₹6.4 L

EMD Value

₹16,100

Closing Date

23 Oct 2026, 6:00 pm4d left

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

Electrical Wing Irrigation Subdivision Chalakkudy

Work Description

GENERAL Electrical repair and renovation works in Kannannur LIS Electrification General Electrical Work

Tender Information

Tender ID

2026_Irrig_879286_3

Reference Number

C-ETN-OCT/EL/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Period of Work

120 days

Location

Chalakkudy

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredBILL OF QUANTITY(BOQ) (.xls)

RequiredDULY FILLED AND SIGNED COPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredDULY FILLED COPY OF Requisition Form for e-Payment (.pdf)

RequiredDULY FILLED AND SIGNED COPY OF INTEGRITY PACT CERTIFICATE (.pdf)

RequiredDULY FILLED AND SIGNED COPY OF AFFIDAVIT (.pdf)

RequiredDULY FILLED AND SIGNED COPY OF FORM OF TENDER (BID SUBMISSION LETTER) (.pdf)

RequiredSBD DOWNLOADED FROM ETENDER WEBSITE (.pdf)

RequiredBidders valid registration certificate in Kerala PWD Electrical wing/Inspectorate (.pdf)

RequiredGST registration certificate (.pdf)

Requiredsigned copy of special conditions and accepted list of materials (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,420

EMD Fee Amount

₹16,100

Important Dates

Last Activity

14 Oct 2026

Published

14 Oct 2026

Bid Opening

26 Oct 2026

Download Starts

14 Oct 2026

Download Ends

23 Oct 2026

Submission Starts

14 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (90 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Electrification
1.001	OD166778/2026-2027:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to relevent IS Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	20	sqm	-	-
1.002	90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	1.5	sqm	-	-
1.003	90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board	30	metre	-	-
1.004	90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)	6	metre	-	-
1.005	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	75	kg	-	-
1.006	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	2,500	Cum cm	-	-
1.007	90.14.7:Supply and providing copper earth bus in the panel board	550	Cum cm	-	-
1.008	OD166770/2026-2027:Carrying out control wiring for panel with normal meters and indication lamps for interconnecting the control devices/ equipments including providingsuitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring,keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run with required sockets.-	40	metre	-	-
1.009	OD167019/2026-2027:Supplying and fixing .5 amps to 4 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole	10	each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.12 MB

Tendernotice_2.pdf

PDF • 2.62 MB

Work Item Documents

BOQ_1494949.xls

BOQ • 0.36 MB

Kannannur15182NITSBDmerged.pdf

Tender Documents • 1.69 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Electrification
1.001	OD166778/2026-2027:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to relevent IS Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	20	sqm	-	-
1.002	90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	1.5	sqm	-	-
1.003	90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board	30	metre	-	-
1.004	90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)	6	metre	-	-
1.005	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	75	kg	-	-
1.006	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	2,500	Cum cm	-	-
1.007	90.14.7:Supply and providing copper earth bus in the panel board	550	Cum cm	-	-
1.008	OD166770/2026-2027:Carrying out control wiring for panel with normal meters and indication lamps for interconnecting the control devices/ equipments including providingsuitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring,keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run with required sockets.-	40	metre	-	-
1.009	OD167019/2026-2027:Supplying and fixing .5 amps to 4 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole	10	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Electrification

1.001

OD166778/2026-2027:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to relevent IS Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

sqm

1.002

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

1.5

sqm

1.003

90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board

metre

1.004

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

metre

1.005

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

1.006

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

2,500

Cum cm

1.007

90.14.7:Supply and providing copper earth bus in the panel board

550

Cum cm

1.008

OD166770/2026-2027:Carrying out control wiring for panel with normal meters and indication lamps for interconnecting the control devices/ equipments including providingsuitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring,keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run with required sockets.-

metre

1.009

OD167019/2026-2027:Supplying and fixing .5 amps to 4 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

each