Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹50.8 LAccepted-AOC | ₹50.8 L | L1 | Accepted-AOC ok |
| 2 | L2₹56.0 LRejected-Finance 83 VPO SANGHI ROHTAK 124303 | ROHTAK | ROHTAK | HARYANA | 124303 | ₹56.0 L | L2 | Rejected-Finance HIGHER |
| 3 | L3₹56.6 LRejected-Finance M C SONEPAT | SONIPAT | HARYANA | 131001 | ₹56.6 L | L3 | Rejected-Finance HIGHER |
| 4 | L4₹65.1 LRejected-Finance | ₹65.1 L | L4 | Rejected-Finance HIGHER |
| 5 | L5₹68.2 LRejected-Finance 0 0 125039 | HISAR | HARYANA | 125039 | ₹68.2 L | L5 | Rejected-Finance HIGHER |
| Sl No | Description | Qty | Unit | The Luxmi Coop. L C Society Ltd. L8 | The Om Luxmi Coop. L&C Society Ltd. L10 | The Bhadana Co. Op. Society L3 | The Rakhi Sahapur Coop L and C Society Ltd. L5 | The Sikender Co-op L and C society Ltd L7 | The Balayan Enterprises Co-op L and C society ltd L4 | The Dada Udai Coop. L C Society Ltd. L1 | The Raj Coop. L C Society Ltd. L6 | The Gopinath Coop. L C Society Ltd. L2 | dharam cooperative labour and construction society Ltd L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | providing and fixing MS jali reinforcement of galvanized steel wire complete in all respect | 4,750 | Sqm | 100 ₹4.8 L | 120 ₹5.7 L | 50 ₹2.4 L | 10 ₹47,500 | 89 ₹4.2 L | 88 ₹4.2 L | 60 ₹2.9 L | 60 ₹2.9 L | 50 ₹2.4 L | 100 ₹4.8 L |
Tender Value
₹71.9 L
EMD Value
₹1.4 L
Closing Date
27 Feb 2026, 10:00 amClosed
Padam Bhushan
Muncipal Corporation Sonipat
1212 - Estimate for Reconstruction of various streets in Housing board colony,Chawla colony in ward no-5 Under MC Sonipat
2026_HRY_503101_1
20261F15C1B5 87F6 4F78 B4D4 B3055C147DB0292ULB
Open Tender
Civil Works
180 days
Sonepat
2 documents required · 2 mandatory
₹5,000
₹1.4 L
Yes
15 May 2026
17 Feb 2026
27 Feb 2026
17 Feb 2026
27 Feb 2026
17 Feb 2026
17 Feb 2026 - 19 Feb 2026
providing and fixing MS jali reinforcement of galvanized steel wire complete in all respect
Percentage BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
[13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate]
[17.22.2]Water Bound Macadam Gr I 2. Water Bound Macadam Grading I with screening Type A Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications [Through Rate]
[17.26.2]Tack Coat 2. Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications [Through Rate]
[17.37]Mastic Asphalt Providing and laying 25 mm/ 50 mm thick mastic asphalt wearing course with paving grade bitumen 85/25 or VG - 30/40 @ 10.2%, fine aggregates, course aggregates, lime filler @ 17.92% of total, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine-grained hard stone chipping at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces is not less than 100C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 of MORT&H specifications (5th Revision, 2013) [Through Rate]
[21.93.1]Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. 1. Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening [Through Rate]
[22.85.3]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes [Through Rate]
[3.1.18]By Mechanical Transport including loading, unloading and stacking 18. Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10 km for all lifts, complete as per directions of Engineer-in-charge. [Rate]
[5.23.2]Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2. Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) [Through Rate]
[5.4.2]Dismantling Stone Spalls or Brickbats Filling 2. Grouted with natural silt and clay [Through Rate]
[6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate]
[9.57.2]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameter [Through Rate]
Please Enable Macros to View BoQ information
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
BOQ_581786.xls
BOQ • 0.31 MB
AD0150039.pdf
Additional Documents • 1.48 MB
Download all tender documents and submit your bid