CERTAIN REPAIR SUCH AS JOINERY, SANITARY FITTINGS, FLOORING, PLASTERING ETC IN TECH AREA AT AF STN HALWARA

Amount

Taking down chowkhats or frame of any description (without taking off shutter from the frame) area n. exc 1.5 Sqm complete all as specified and directed.

All as per Sl Item No 01 above but exc 1.5 sqm and n. exc 4 Sqm Note for Sl item No 1 & 2 :- The rates quoted are deemed to be included for cutting hold fasts for removal of chowkhats/frames.

Taking down shutters of any description of size exc 1 sqm but n. exc 2 sqm each leaf complete all as specified and directed.

All as per Sl Item No 03 above but size n. exc 1 Sqm

All as per Sl Item Ser No 03 above but size exc 2 Sqm

S&F 1.25mm thick Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. Note : Butt hinges shall be measured seperately as "Supply only" under respective items of this BOQ.

All as per Sl item No 6 above but size 125x60mm

S&F 2nd class hardwood 30mm thick glazed or skelton shutters, open rebated prepare to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut or mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), complete all as specified and directed.

S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specifiecation and drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with partical board core, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm moulded PVC sheet on the front face & 2mm plain colour plain PVC sheet on back face and fixing in frame as pere specifications and drawings complete all as specified and as directed.

Dismantling wrought iron work or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for framed work of Fe-410W grade E-250 quality- B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium frame of size (100mmx44mmx1.5mm) for doors, windows, ventilators or in partitions with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section, vertical style of door shutter of size 85mm x 44.45mm x1.5mm thick, top , middle and bottom rail of size 85mm x 44.45mm x 1.5mm thick and fixing plain/tinted sheet glass or 3mm thick aluminium coated panel ACP sheet with aluminium beading rubber gasket/beading as directed including fittings ie one mortice lock for aluminium door (each) and three Nos aluminium hinges of size 100mm, two aluminium tower bolts of 250mm size and two Nos american type hinges of size 250mm for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces complete all as specified and as directed by Engineer - in -Charge. Note:- Cost of sheet glass Plain/frosted and ACP sheet & fittings mentioned above are deemded to be included in the quoted rates and nothing extra is admissible.

S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, rubber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21, 100 mm long 2 Nos, suitable handle 1 No complete all as specified and as directed

S&F Powder coating aluminium grills of any pattern/design weight not less than 1.5kg per square meter complete all as specified and as directed.

S&F in repairs 18mm thick medium density fibre board, exterior grade, fixed to timber frame work as in cup board and cup board shuters including leeping/beading fancy type with screws complete all as specified and directed.

S&F soft closing clip of hinges full/half overlay type of stainless steel complete all as specified and directed.

S&F 100mm size extruded section aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F factory made steel window/ventilator 1.25mm thick sheet box type using ERW hollow 'P' section comprising single frame for and including glazed skelton shutter jointed internally with flat iron 40 x 4 mm complete including grill of 10 mm square bars, fixed horizontally @ 10 cm c/c, hinges, handle, tower bolts, stops, lugs etc, all as shown on drawing No TD - 219(c) sheet 1/3 to 3/3 as applicable complete, including cutting holes and making good to dismantled portion with PCC ( 1:2:4) type B-1 for four Nos of each window complete all as specfied and directed. Note: (i) Unit rate quoted against this item shall also include the iron mongery and grills as shown on drawings. (ii) Glazing & Painting shall be measured & Paid separately.

Hacking out broken glass (any size shape, thickness, quality or description) from wooden/metal frame glazed with putty or fixed with beads having area not exc 0.50 sqm in each pane complete all as specified

S&F 200mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150mm size extruded section aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F in repairs 300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Supply only 100mm long mild steel butt hinges cold rolled medium weight complete all as specified and directed.

S&F 300 mm long ordinary rat tail rod pattern spring (mild steel) including roller and roller plate complete all as specified and directed.

S&F in replacement Door closer Cast iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) as filling in pressed steel door chowkhat and holdfast ,bed plate etc complete all as specified and directed.

S&F brass Mortice lock vertical type 75mm 4 Levers complete all as specified and directed.

S&F in repairs 40mm waste fittings, brass chromium plated for sink, basins and urinals etc with long screwed shanks and fly-nut flange end beddedin red lead cement and other end fixed complete all as specified and directed..

S&F 4 mm thick sheet glass ordinary quality and fixing in frame with glass putty or fixed with wooden beads having area not exc 0.50 sqm in each pane complete all as specified

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinnd tacks or glvanised wire staples complete all as specified and directed..

S &F in repairs MS coloured hollow curtain rod 19/20 mm dia with two Nos decorative type brackets knobs for each rod of length not exceeding 1.80 mtr including fixing with suitable arrangements complete all as specified and directed.

S & F in repair steel rolling shutters without ball bearing , guide channel as specified including top covers anchoring rod, hasp and staple and one shop coat of primer erect in position as indicated complete push or pull or manual type having thickness of laths 1.00 mm including taking down old rolling shutter etc complete all as specified and directed.

All as per Sl item No 40 above but gear oprated type with bevel gear box and crank handle etc complete all as specified and directed.

Supply ball bearing for rolling shutter any suitable size etc complete.

Taking down manual operated rolling shutter any size and refixing in the same opening after servicing ie oil, greasing and making it fully functional and making good the disturbed surfaces complete all as specified and directed. Note:- If ball bearing, spring, shaft, lever locks are found unserviceable, the same shall be replaced and will be paid seperately as "supply only" under respective items of this BOQ.

All as per Sl item No 43 above but Gear operated rolling shutter

Supply only shaft for rolling shutter suitable for any size rolling shutter complete all as specified and directed.

Supply only spring for rolling shutter suitable for any size rolling shutter complete all as specified and directed.

Repairing/Greasing etc complete and making noiseless functional sliding door shutter of hangers, the area of each door shutter exc 20 Sqm each complete all as specified and directed.

Supply only Mild steel safety lever locks with 4 levers for rolling shutters complete all as specified and directed.

S & F in replacement 500 Ltrs capacity Rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling existing tank complete all as specified and directed.

S&F in replacement 20mm dia PTMT ball valves, high pressure with polythene float and flynut complete screwsed for iron pipe for brass ferrule and fixed etc complete.

S & F in repair wash down water closet (Pedestal pattern) including connection to drain pipe (outgoing pipe) and to flush pipe, antisyphonage pipe etc complete all as specified.

S & F in repairs vitreous china urinal flat back, size 465mm x 355mmx 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) but including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screwes pointing around urinal back including waste coupling and discharge pipe complete all as specified.

S&F in repair vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest excluding flushing cistern and flush pipe complete including provision of cement concrete bedding complete all as specified and directed..

S&F in repair vitreous china wash hand basin white flat back size 550mmx400m excluding taps waste china and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but including waste coupling and waste pipe complete all as specified.

S&F in repairs 15mm bore pillar taps cast copper alloy screwed down high pressure with crutch or butterfly handle complete all as specified and as directed

S&F in repairs 15mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle complete all as specified and as directed.

S&F in repairs 15mm bore bib tap cast copper alloy screwed down high pressure with crutch or butterfly handle for iron pipe or brass ferrule and fixing complete all as specified and as directed

Taking up or down 15mm bore steel water tubing and connection including cleaning for re fixing or removal to store complete all as specified and directed.

All as per Sl item No 58 above but 20mm bore

M&L for 15mm bore GI tubing medium grade with all fittings complete fixed to wall, ceiling or laid in floors complete all as specified.

All as per Sl item No 60 above but 20mm bore

S&F 20mm bore nipple suitable for HDPE water tank. (Minimum weight ?45gm) complete all as specified and directed.

M&L in replacement 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L in replacement PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in replacement 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in replacement 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius

S&F110mm PVC (SWR) bends any radius

S&F 100mm dia PVC (SWR) P or S traps.

S & F in repair kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowel size 410mm x330mm x 160mm complete all as specified.

S&F in repairs stainless steel towel rail, 20mm dia, D type, 60cm long fixed with and including chromium plated brass screw and wooden /plastic cleat etc complete all as specified and directed.

S&F in repairs 10 Ltrs capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F Plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flaxible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from not exceeding 500 Ltr capacity tanks and from mouths of circulating pipes using bleaching powder and after cleaning proper water supply to all connections where the water tank is connected etc complete all as specified and directed.

S&F in replacement 15mm dia PVC connection pipe 450mm long with PTMT nuts complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving’s n exc 15cm thickness below or above ground level complete all as specified and directed.

Dismantling floor hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of mortar for laying floor finished in cement mortar 1: 6 complete all as specified and directed..

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces complete all as specified and directed.

M&L for 25mm thick PCC type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement complete all as specified and directed..

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed..

All as per item No. 83 above but in vertical surfaces as Dado/Skirting etc

M&L for 9 to 10mm thick Vitrified ceramic tiles light shade matt finish (Square/Rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed..

All as per Sl item Ser No.85 above but as in skirting, dados/Vertical surfaces etc

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed..

M&L for coloured glazed ceramic tiles 300x200x7mm thick/450X350X7mm in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed..

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in mortar.

M&L for 75mm thick PCC type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base all as specified and directed.

M&L for 20mm thick screed bed or bedding layer of mortar for laying floor finished in cement mortar 1:6 complete all as specified and directed..

M&L for 18-20mm thick Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for 18-20mm thick Machine cut kota stone slab in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed included and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Kota stone for steps & risers shall be in single piece.

M&L for chequered cement concrete tiles 300mmx300mmx25 mm thick, with grey cement and no pigment, set and jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for 16 to 18 mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding edges etc and polishing complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description all as specified and as directed

S & F in repairs Anodised aluminium snap grid frame work for false ceiling, size of grid 605mmx605mm including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 8mm thick Gypsum Board in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size complete all as specified and as directed

M&L elegant tiles made of perforated cement fiber composit 595mmX595mmX8mm covered with obsorptive microfiber coating on the front side and Acoustics fiber on the back side,water resistance ,fire resistance absorption cofficient up to 0.89 at 160 Hz tested as per ISO 354.The tiles are anti -sag and including new frame work of T24 grid system of 0.6mm thick main T length minimum 3000mm ,web minimum 35mm to be placed at 600center to center and secondary cross T of length 600mm web minimum 35mm inter locked,wire support for main T to be taken at every 1200mm length wise and 600mm width wise complete all as specified and directed..

M&L elegant tiles made of perforated cement fiber composit 595mmX595mmX8mm covered with obsorptive microfiber coating on the front side and Acoustics fiber on the back side,water resistance ,fire resistance absorption cofficient up to 0.89 at 160 Hz tested as per ISO 354.The tiles are anti -sag and installed on existing ceiling frame including taking down old ceiling board etc all complete all as specified and directed..

S&F 8 to 10mm thick elegant tiles made of perforated cement fiber composit covered with obsorptive microfiber coating on the front side and Acoustics fiber on the back side,water resistance ,fire resistance absorption cofficient up to 0.89 at 160 Hz tested as per ISO 354.The tiles are anti -sag sheet as in panelling in strip & channel feathered at the edge for fixing on fixed to walls, vertical surfaces of any pattern, complete all as specified and as directed.

Dismantling of AC/fibre glass translucent corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings all as specified and as directed

S & F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations sid lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed

Taking down cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified

M&L for bircks works with sub class 'B' bricks straight or curved on plan exc 6m mean radious, built in CM 1:6 .

All as per item No 106 above but except bricks

M&L for 15mm thick plaster in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished surfaces fair and even without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of ceiling in cement mortar 1:3 finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint over a coat of primer in camouflage pattern, using minimum 3 different approved tint/ colour as approved by GE complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer over 1mm thick birla putty coating complete all as specified and as directed.

M&L preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

All as per Sl item No 117 above but area exceeding 2 Sqm each.

M&L preparation of new plaster surfaces of wall and applying two coats of exterior acrylic emulsion paint over a coat of primer in camouflage pattern, using minimum 3 different approved tint/ colour as approved by GE complete all as specified.

S&F turbo fan ventilator made of stainless steel of size of throat diameter 21-28 inch and outer diameter 30 inch, ring size 31 inch fixed in hanger roof including taking down old turbo fan ventilator etc complete all as directed by Engineer-in-Charge.

M&L in replacement bird proof nylon net fixing with 4mm dia Gl wire 600mmX600mm mesh made up into matteresses, cages, and lapped wire and laid in position with suitable arrangement etc complete in side of hangers as per direction of Engineer-in- charge and as approved by GE complete all as specified. The pattern and size of nylon rope/net will be approved by GE.

Deol Builders

M/S SANGA SINGH AND CO

BEHL AND COMPANY