Construction of Shops in front of Civil Hospital Paonta Sahib in Ward No 7

Amount

Earth work in ecxcavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains 9not exceeding 1.5m in width or10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kind of soil.

Providing and laying in position cement of sprcified grade excluding the cost of centering and shuttering- all work up to plinth level: 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) plinth including carriage of material in all leads & lifts.

Brick work with common burnt clay modular bricks of class designation 7.5 conforming in exposed brick work including making horizontal and vertical grroves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) above plinth level upto floor V level

Cement concrete flooring 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate ) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps et complete 40mm thick with 20mm nominal size stone aggregate

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermomechanically treated bars of grade Fe-500 D or more

Centering and shuttering including strutting, propping etc and removal of form for : Foundations, Footings, bases of columns etc for mass concrete

Centering and shuttering including strutting, propping etc and removal of form for : Lintels, beams, plinth beams, girders, bresummers and cantilevers

Providing and laying in position reinforced cement of sprcified grade excluding the cost of centering and shuttering- all work up to plinth level: 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) plinth including carriage of material in all leads & lifts.

12mm cement plaster of mix 1:4 ( 1 cement : 4 fine sand)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.Two or more coats on new work

White Washing with lime to give an even shade : 13.37.1 New work (three or more coats)

Providing and fixing 1 mm thick M.S. sheet slidingshutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and Tiron guide at the top and bottom respectively, including applying a priming coat of approved steel primer

Rajender Singh