MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL SCHOOL BUILDING AT T.P.S. NO.24,27,73 & VILLAGE BHARTHANA AND UMARA IN NEW EAST (SARTHANA) ZONE , SURAT.(2nd Attempt)

NAME OF WORK :- MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL SCHOOL BUILDING AT T.P.S. NO.24,27,73 & VILLAGE

BHARTHANA AND UMARA IN NEW EAST (SARTHANA) ZONE , SURAT.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Part -A Civil Work.

Dismentling steel work including distempering and stacking the maerials with all lead and lift.

Demolition including stacking of serviceable materials and disposal of unserviceable materials with all

(i) RCC work 20.00 1110.75 C.M.

Demolition of brick work and stone masonary including stacking of serviceable materials and disposal of

3 unserviceable materials with all lead & lift.

(II) on Cement mortar. 20.00 577.92 C.M.

Removing the scraping of old deteriosted plaster of any thickness from wall/R.C.C. member including

4 stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift. 125.00 20.55 S.M.

Dismentalling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of

unserviceable materials with all lead & lift.

Kota stone flooring and steps 40.00 50.11 S.M.

Marble 40.00 50.11 S.M.

Tiles flooring / Dedo 50.00 50.11 S.M.

Granite flooring and steps 40.00 50.11 S.M.

Dismantling doors windows ventilators etc. (wood or steel) shutters including chowkhats, Architraves,

6 holdfasts and other attachment etc. comp. and stacking them within all lead & lift. (I) not exceeding 3 16.00 197.09 No.

Dismantling sanitary fittings like wash basin, w.c. pan Indian and Europeans type, flushing tank etc.

including stacking the materials with all lead & lift.

Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings and clamps including stacking

the materials with all lead and lift. (for any dia, of pipe)

Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys,Gutters etc. stacking of serviceable materials

and disposal of unserviceable materials with all lead and lift. (i) G.I. sheet roofing.

Removing of Collapsible Gate 2.00 101.00 No.

Removing of Rolling Shutter 2.00 101.00 EACH

Dismentling barbed wire in fencing including making rolls and also including dismentling fencing posts

including all earth work concrete in base and making good the disturbed fround stacking useful materials

10 as directed and disposing as directed and disposing of the unserviceable materials with all lead and lift. 20.00 70.15 R.M

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the surplus excavated soil as

directed within a lead of 50 M. For following diameter of piles.

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the excavated

12 stuff upto 50 mt. Lead & all lift, watering etc Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 30.00 123.13 C.M.

Executed With Manual Labour

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 50.00 212.52 C.M.

Providing & Laying C.C 1:5:10 (1cement :5coarse sand :10 graded stone agg.40 m.m Nominal size )&

curing comp. excl. cost of from work in :Foundation & Plinth

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone agg. 40 mm nominal size) &

curing comp. incl.cost of form work in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal size)&curing

comp. excl. cost of form work in :(a) foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone agg. 20 mm nominal

16 size)& curing comp. Includ.cost of form work but exclu. Cost of reinforcement for reinforced concrete work 5.00 4250.50 C.M.

in : (A) Foundation,footing,Base of columns and Mass concrete.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded stone agg. 20 mm nominal

17 size) finishing smooth curing etc. comp. Incld. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 sq.mt 2.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9201.68 C.M.

(1)Having c/s area up to 0.08 sq.mt 2.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M.

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending, binding &

placing in position etc. comp. Upto G.L./P.L.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm.

19 in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks 12.00 4441.11 C.M.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not

20 exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 30.00 136.92 C.M.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of

22 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1- 140.00 347.42 S.M.

cement : 1-sand) etc. complete.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg. 20 mm

nominal size) finishing smooth curing etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in :

(1) Having c/s area up to 0.080 sq.mt Ground Floor 3.00 12844.32 C.M.

First Floor 2.00 12885.28 C.M.

Second Floor 2.00 12926.24 C.M.

Terrace (third) Floor 0.00 12967.19 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt Ground Floor 3.00 11166.97 C.M.

First Floor 2.00 11207.92 C.M.

Second Floor 2.00 11248.88 C.M.

Terrace (third) Floor 0.00 11289.33 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. Ground Floor 3.00 9201.68 C.M.

First Floor 2.00 9242.63 C.M.

Second Floor 1.00 9283.59 C.M.

Terrace (third) Floor 0.00 9324.54 C.M.

(1) Having c/s area up to 0.080 sq.mt Ground Floor 3.00 9102.61 C.M.

First Floor 2.00 9143.56 C.M.

Second Floor 1.00 9184.52 C.M.

Terrace (third) Floor 0.00 9225.47 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt Ground Floor 3.00 8174.41 C.M.

First Floor 2.00 8215.36 C.M.

Second Floor 1.00 8256.32 C.M.

Terrace (third) Floor 0.00 8297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. Ground Floor 3.00 7086.88 C.M.

First Floor 2.00 7127.84 C.M.

Second Floor 1.00 7168.79 C.M.

Terrace (third) Floor 0.00 7209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'. Ground Floor 1.00 7984.42 C.M.

First Floor 0.00 8025.37 C.M.

Second Floor 0.00 8066.33 C.M.

Terrace (third) Floor 0.00 8107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'. Ground Floor 5.00 7396.96 C.M.

First Floor 0.00 7437.92 C.M.

Second Floor 0.00 7478.87 C.M.

Terrace (third) Floor 0.00 7519.83 C.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(4) Slabs having more than 13 cm. Thickness Ground Floor 0.00 6813.01 C.M.

First Floor 0.00 6853.96 C.M.

Second Floor 0.00 6894.92 C.M.

Terrace (third) Floor 0.00 6935.87 C.M.

Ground Floor 2.00 9982.37 C.M.

First Floor 2.00 10023.32 C.M.

Second Floor 1.00 10064.28 C.M.

Terrace (third) Floor 0.00 10105.23 C.M.

Ground Floor 2.00 5576.81 C.M.

First Floor 2.00 5617.76 C.M.

Second Floor 1.00 5658.72 C.M.

Terrace (third) Floor 0.00 5699.67 C.M.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg. 20 mm

24 nominal size) finishing smooth curing etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in :

(A) Stair cases including landings etc

Ground Floor 1.00 7698.11 C.M.

First Floor 1.00 7739.06 C.M.

Second Floor 0.00 7780.02 C.M.

Terrace (third) Floor 0.00 7820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 1.00 11613.07 C.M.

First Floor 1.00 11654.03 C.M.

Second Floor 1.00 11694.99 C.M.

Terrace (third) Floor 0.00 11735.94 C.M.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm nominal size)&

25 curing comp. Includ.cost of form work but exclu. Cost of reinforcement for reinforced concrete work in : 3.00 3741.69 C.M.

(A) Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incld. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in :

(1)Having c/s area up to 0.08 sq.mt 1.00 12335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 8692.87 C.M.

(1)Having c/s area up to 0.08 sq.mt 1.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 6578.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m Nominal size)&

curing comp. incl. cost of from work in: wall caps/ copings.

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---Ground Floor

Ground Floor 225.00 77.29 Kg.

First Floor 150.00 78.34 Kg.

Second Floor 20.00 79.39 Kg.

Terrace (third) Floor 10.00 80.44 Kg.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm.

in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 12.00 4729.83 C.M.

First Floor 7.00 5018.55 C.M.

Second Floor 2.00 5307.27 C.M.

Terrace (third) Floor 1.00 5595.99 C.M.

Half brick masonry in common brunt clay building bricks having crushing strength not less than

30 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth (C)Fly Ash Bricks 15.00 551.00 S.M.

Ground Floor 12.00 712.81 S.M.

First Floor 5.00 719.37 S.M.

Second Floor 3.00 725.94 S.M.

Terrace (third) Floor 2.00 732.50 S.M.

Uncoursed rubble masonary with hard stone of approved quality in foundations and plinth in cement

mortar 1:6 (1 Cement : 6 sand) including leveling up etc. complete.

32 Pointing on Coursed stone masonary with cement mortar 1:3 (1 cement : 3 Sand)

(A) Flush Pointing 12.00 101.89 S.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(B) Ruled Pointing 12.00 105.24 S.M.

33 Pointing on Uncoursed stone masonary with cement mortar 1:3 (1 cement : 3 Sand) ---

(A) Flush Pointing 12.00 110.24 S.M.

(B) Ruled Pointing 12.00 114.25 S.M.

Providing Rubble Pitching with hard stone of approved quality in cement mortar 1:6 (1 Cement :

Coarse sand) including leveling up ,Curing etc. complete excluding pointing

Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind

abutments and between returns as directed.

Providing upto floor two level precast cementconcrete jali or grill 1:2:4 mix (1-Cement : 2- coarse sand : 4-

graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire including

36 roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing complete. (B) 40mm thick.

Ground Floor 5.00 741.93 S.M.

First Floor 1.00 752.39 S.M.

Second Floor 0.00 762.85 S.M.

Terrace (third) Floor 0.00 773.32 S.M.

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls similar surfaces for

plastering & finished even & smooth with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces

Ground Floor 130.00 199.28 S.M.

First Floor 75.00 228.84 S.M.

Second Floor 20.00 258.39 S.M.

Terrace (third) Floor 5.00 287.94 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 80.00 225.34 S.M.

First Floor 45.00 254.89 S.M.

Second Floor 25.00 284.45 S.M.

Terrace (third) Floor 10.00 314.00 S.M.

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete walls similar

surfaces for plastering & finished even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For

wall and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more than 10 metres above ground level

39 consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of 100.00 347.42 S.M.

C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor levels

consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of

40 C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller horizontal as well as vartical ( two 80.00 324.00 SM

times ) up to good quality and size of grain in elevation as per directed by engineer incharge.

Providing 20 mm thick double coat mala cement plaster on brick / concrete work for plastering

comprising of base coat 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete.

42 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For all floor 20.00 43.74 R.M.

Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor (M.R.)

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / PVC)at junction of brick

work and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag by cement

mortar 1:3 before applying the plaster, including curing, scaffolding all complete as directed.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar

1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc.

complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid

on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed

with pigment to match the shade of slab including rubbing and polishing etc.complete.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson,Nitco,Somani ,Bell make at all

47 floor levels, in flooring, treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 30.00 900.29 S.M.

sand) finished with flush pointing in white cement etc.com. For all floors

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, Jhonson,Nitco,Somani,Bell make at all

floor levels in skirting risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary

cement paste for fixing and joined with white cement slurry etc. complete. For all floors

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm

49 thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. 25.00 960.42 S.M.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing & laying marble stone slab flooring over 20 mm.av. base of C.M.1:6 ( 1 cement :6 coarse sand )

51 & jointed with grey cement slurry incl. rubbing & polishing comp.(A) Marble slab 25 mm. Thick. 15.00 2246.54 S.M.

Providing & laying granite slab 18mm thick in flooring, treads of steps and landing laid on bed of 20mm

thick cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with flush

pointing in white or colour cement including rubbing and polishing complete. ( Basic Rate:-

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and pillars laid on 10mm thick

53 cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished with flush pointing in white or colour cement 25.00 2449.00 S.M.

including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid on 10mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand) with nessary adhesive material and finished with flush pointing in

white or colour cement, including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

Labour Charges For Half Round Edge For Granite

Labour Charges For Quater Round Edge For Granite

Labour Charges For Edge Finished For Granite

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson, Nitco, Somani, Bell, Asian or

Euro make in flooring,treads of steps & Landing laid on bed of 20 mm (Average) base of cement

mortar 1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on existing flooring by adhesive material

58 including dismentaling of existing flooring and jointed with colour cement slurry including finished with flush S.M.

pointing & cleaning the

surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of steps and landing laid

59 on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush pointing in white 50.00 1092.37 Sqm.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of steps and dedo on

60 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry. 150.00 1135.80 S.M.

Providing and laying chequered precast concrete tiles 22mm thick with aggregate of sizes upto 6mm

in floors treads of steps and landing on 20mm thick bed of C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5 (1

Lime putty : 1.5 sand) jointed with neat cement slurry with pigments to match the shade of the tiles.

Providing and constructing sandwitch type Polish Kota Stone cooking platform 0.6 mt. wide & 0.75 mt.

height, including one end side Polish Kota stone (Double Polish) of 1.25 mt. height & front Polish Kota

stone patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

62 finishing smooth with cement slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt size of 10.00 3010.00 R.M.

approved quality and make with required all fitings & fixitures etc. comp as per instruction given by site in

Providing and constructing sandwitch type Granite stone cooking platform 0.6 mt. wide & 0.75 mt.

height, including one end side granite stone (Double Polish) of 1.25 mt. height & front granite stone

patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3

63 with finishing smooth with cement slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt 5.00 3128.00 Rmt.

size of approved quality and make with required all fitings & fixitures etc. comp as per instruction given

by site in charge at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)

Providing & fixing at all floor levels,both face polished machine cut edge green kota stone slab

64 (30mm) for urinal partition joined with grey cement slurry (1:1) incl. Rubbing & polishing etc. complete. 7.00 900.00 S.M.

Providing & fixing at all floor levels,both face polished machine cut edge Marble slab for urinal

partition joined with grey/White cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)( Basic

Cost- Rs. 450/S.M.)

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and laying rough chiseled dressed stone flooring over 20mm thick base of cement mortar

66 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5 including pointing with cement mortar 1:2 (1 cement : 2 stone 0.00 576.79 S.M.

dust) etc. (A) 25mm thick

Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar

67 creme out upto surface using white cement including rounding off junctions and extending them upto 15.00 779.70 Sqm.

15 cm along the wall clearing with water and oxalic acid etc. as directed.

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water proof Ply Vennered

& 1.5 mm th.laminate shall be pasted on both side with adhesives as specified by the manufacturers. The

68 laminate shall be as per approved shade & texture, of make incl. Sal wood frames of finished size 8.00 3720.00 S.M.

12cm x 7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum fixtures & fastenings For all

Same as Above But Without Frame 8.00 2520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & clearstory windows incl.

Indian teak wood frames of finished size 12cm x 7cm.incl. anodized aluminum fixtures & fastenings

incl. Primer coat of approved quality & two coats of oil painting etc. For all Floor

(A) Fully Panelled 8.00 5533.68 S.M.

(B) Partly Panelled and Partely Galzed 8.00 5185.03 S.M.

(C) Fully Galzed 8.00 4836.39 S.M.

Providing and fixing 35mm thick shutters for Doors, windows and clearstory windows including

70 anodised alluminium butt hinges with necessary screws. 5.00 4101.06 S.M.

(A) Indian teak wood. (i) Fully Panelled.

Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 30.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 30.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 30.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 30.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 30.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 30.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade 30.00 54.78 No.

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 30.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 30.00 873.05 No.

(J) Inter Lock [Kadaka lock] 30.00 209.71 No.

(H) Locks Godrej Mortice lock cover 30.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved sample (30 cms) 30.00 479.33 No.

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length 30.00 59.91 No.

(K) S.S. Door / window hinges 4x1"x1" 30.00 54.78 No.

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter with wood grain

raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected polyurethene foam done in situ along with

71 embedded wooden pieces for stiffening & also taking hinges & fixtures. The whole FRP frame & shutter is 25.00 2019.98 S.M.

to be water proof weather proof,termite proof &resistance to mild acid/alkali. Rates are to be inclusive of

S.S.hinges with fastener sleeve & alluminium fixtures & fastentings.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size

127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x

31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398

kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical

72 member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted 10.00 2140.33 S.M.

float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window.

(A) Same as above but Colour anodized 10.00 2140.33 S.M.

Providing and fixing window having extruded aluminium Powder Coated section frame main outer size

mm x 24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track member

size 92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size

92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of

73 horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), 10.00 1591.87 S.M.

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with

mm thick transparent bronze colour tinted float glass with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 30.00 1591.87 S.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and fixing window having extruded aluminium Powder Coated section frame main outer size

63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track member

size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of

size 61.85 mm x 31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding shutters

74 of horizontal member size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) S.M.

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass

with powder coated aluminium fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc. complete for window.

(A) Same as above but Colour anodized 30.00 1705.67 S.M.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x1.2mm , @ Wt.

75 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation with 5 mm thick frosted glass as 5.00 1175.56 S.M.

details etc complete for Ventilation

(A) Same as above but Colour anodized 10.00 1175.56 S.M.

Providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of Jindal

76 section no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated alluminium frame with 5 mm thick 5.00 1833.29 S.M.

transparent bronze colour tinted float glass as details etc. complete for fix window.

(A) Same as above but Colour anodized 10.00 1833.29 S.M.

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with aluminium section

of Hindalco, Jindal , Narmada,Banco or Equivalent approved make having Poder Coated outer frame Leg

Partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M. shutter section having size

83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x

77 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No. 19370 5.00 3237.00 S.M.

Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of

Greenlam, Panama or archid make as approved by Engineer-incharge including fixing brass pivot, handle,

lock etc. complete.

(A) Same as above but Colour anodized 15.00 3237.00 S.M.

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled partition using

medium duty sections of Hindalco,Zindal, Narmada, Banco or Equivalent approved make having section

63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm

thick clear float glass of approved make including all other necessary fittings and fixtures. Entire work will

have to be made water proof using necessary rubber sectioned wherever required. Gaps all round the

frame to be filled with approved water proof sealent. Bottom portion of doors both side to be covered with

12mm thick prelaminated particle board of approved make and quality and as per design.

(A) Same as above but Colour anodized 35.00 2400.00 S.M.

Providing & fixing Glass Table Top using 08mm th.clear glass with crystal edge & necessary hardware

materials etc. complete as per instruction by engineer in charge.

Providing & laying Non reflective solar contact film for fixing on glass as approved colour,design,cutting

complete as per instruction by engineer in charge.

Providing & fixing door closer Ozon / Dorma / Hyper / Hardwin / Godrej / Alluminium body ISI brander

81 equivalent make with necessary hardware materials etc. complete as per instruction by engineer in 10.00 1400.00 Nos.

Providing & fixing water proof plywood (ISI marks 710 grade) at the door,window and any space in the

82 building. necessary hardware,screws materials etc. complete as per instruction by engineer in charge.

Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc. At all floor levels with

M.S. flats at required spacing & frame around square or round bars with round headed bolts & round

headed bolts and nuts or by screws incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For all

Providing & fixing in position collapsible steel shutters with vertical channels 20 x10 x 2 mm. Braced

with flat iron diagonals 20 x5mm size with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel

pulleys comp. with bolts, locking arrangements, stoppers, handles incl. applying a priming coat of Redlead

paint etc. comp.

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle cleats as in main &

cross beams,hip & trussed purlins connected to common raffers & the like

(B)For work like chain link fencing, above compound wall etc. 5.00 9108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 0.00 10197.11 Qtl.

Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting, Welding &

86 Fixing in position Purlin, Main Chord etc. as per Engineer- in-charge.TATA / JINDAL / ASIAN Make 2500.00 126.00 Kg.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the

87 floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for 350.00 450.00 Kg.

payment purpose only weight of stainless steel members shall be considered excluding fixing accessories

such as nuts, bolts, fasteners etc.).

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick with nuts, bolts, washer or

88 G.I. pins, excluding M.S. angles etc.complete as per relevent IS specification & directed by engineer in 50.00 311.00 S.M

charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing with necessary barbed

wire (12 x 14 guage, weight not less than 0.14 kg. / mt.) pins, hooks, excluding M.S. angles etc. complete

89 as per relevent IS specification.& directed by engineer in charge 150.00 125.00 Kg.

Providing and Fixing hot dip concertina coil of 610 mm dia. made out of 2.59 mm (12 SWG) hot dip

galvanized (G.I. coating not less than 200 gm/sqmt.) th. wire having 80 nos. of spikes and 200 nos. of

clips made out of stainless steel (AISI 304) 1.5 mm th. dia., G.I. strips 0.5 mm th. ( G.I. coating not less

90 than 120 gm/sq.mt.) weight of one coil should not be lesss than 15 kg. etc., complete at the top of 50.00 231.00 R.M.

compound wall fixed with S.S. clips and binding wires whereever necessary etc. complete. ( NOTE:

Strctching length of one coil should not be more than 9 mt.)

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet 0.5 mm. thick

roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm dia with bituman and impet washer

filled with white lead etc. Excluding the cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and

nuts 8m diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata /

Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and

nuts 8m diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or

(ii) 0.63mm THick Sheet 50.00 1016.00 S.M.

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3 gutter with

iron brackets 40mm x 3mm size bolts, nuts, washers etc. including marking necessary connection

with rain water pipes.

(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks bolts and

nuts 8mm dia G.I. limpet and bitumen washer complete (i) 0.80 mm thick

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3 gutter with iron

96 brackets 40mm x 3mm size bolts, nuts, washers etc. including marking necessary connection with rain 15.00 412.00 R.M.

water pipes. (ii) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks bolts and

nuts 8mm dia G.I. limpet and bitumen washer complete (ii) 0.63mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main cladding on both edges. All

fixing holes must be predrilled oversize as specified for the sheet length and fastener being used.

Fasteners must be fitted with approved washers. Fixings should be tightened to ensure a weatherproof

seal but they must not be over tightened Side-lap fasteners must also be installed at specified centers

98 with the FRP sheet having clearance holes provided as per the main fasteners Weatherproofing shall be

provided at all flashing points under the normal flashing by the fitting of a foam closure strip to match the

profile being used. Closure strips will be sealed to the sheet with an appropriate non setting silicone

sealant. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick 5.00 992.00 S.M.

(b) 2 mm thick 15.00 1100.00 S.M.

Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is coated with an anti-UV Co-

extrusion layer having good weather resistance, it can maintain its optical properties and mechanical

performance for a long time. Fasting is usually done by screws. , The fastening screws should be inserted

about 500 mm apart and 300mm apart Along the supporting internal purlin and edge pulin.All fixing holes

99 with diameter at least 2 mm larger than screw must be predrilled into each screw location. The screws

should be 6mm diameter with length according to sheet thickness and corrosion resistant, with at least

heavy duty hot dripped galvanized or stainless steel. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 5.00 1261.00 S.M.

(b) 2 mm thick Solid Sheet 5.00 1510.00 S.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete also horizontaly

100 in line and connecting to purline angle etc by welding rereting etc. (a) Medium duty "B" Class 10.00 750.00 R.M.

Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete also horizontaly

101 in line and connecting to purline angle etc by welding rereting etc. (a) Medium duty "B" Class 10.00 485.00 R.M.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter locked

together through their entire lenght and jointed together at the ends by end locks mounted on specially

102 designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking

with push-pull operation including the cost of hood cover and spring etc. complete

(A) Shutters having width below 3.5m 5.00 3554.40 S.M.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter locked

together through their entire lenght and jointed together at the ends by end locks mounted on

103 specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and 5.00 4546.01 Smt.

outside locking with push-pull operation including the cost of hood cover and spring etc. complete. (B)

Shutters having width 3.5 M and above

Providing and fixing hard drawn steel wire fabric 75mmx25mm mesh or weight not less than 7.75 kg.per

Sq.M. to window frames etc. including 60x 20mm beading of teak wood.

Painting two coat (excluding priming coat) on new steel and other metal surface with synthetic

105 enemal paint, burshing to give an even shade including cleaning the surface of all dirt, dust and other 30.00 68.57 S.M.

foreign matters.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe with hooked ends to

106 RCC slabs curing, layig including painting the exposed portion of loops, all as per standard design 30.00 135.47 No.

Distempering two coats with oil bound washable distemper of approved brand & manufacture & of

required shade on wall surface to give an even shade over and & including a priming coat of alkali

107 resistance primer of approved brand after throughly brushing the surface to give an even shade after

throughly brushing the surface free from mortar droppings and other foreign matter and also including

preparing the surface even and smooth.

(A) For wall 500.00 75.84 S.M.

(B) For ceilings 350.00 84.37 S.M.

--do---- Extra Subsequant coat over above Item

(A) For wall 500.00 31.91 S.M.

(B) For ceilings 350.00 35.25 S.M.

Apply two coats of putty and two coats of primer of approved brand and manufacture on new wall

108 surface to give an even shade including thoroughly brushing the surface free from mortar dropping and 150.00 40.59 S.M.

other matter and sand papered smooth.

Distempering two coats on previously distempering wall (without primer) with oil bound washable

distemper of approved brand & required shade on wall surface to give an even shade after throughly

brushing the surfaces clean of all grease, dirt loose places of sceles & also including preparing the

surface even and smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

110 undecorated wall surface to give an even shade including throughly brushing the surface free from mortar 125.00 83.36 S.M.

droppings and other foreign matter and sand papered smooth.

For every subsequent coat Extra over item no.above 50.00 35.41 S.M.

Applying Priming coat over new steel and other metal surface after over and including preparing the

surface by throughly cleaning oil, grease dirt and other foreign matter and scoured with brushed fine steel

111 wool, scrapers and sand paper with ready mixed priming paint brushing red lead. 20.00 36.74 S.M.

Painting two coats of enamel paint (Excluding priming coat) over previously painted wall after

112 removing entire surface with even shade & surface after removing dirt, dust foreign matter etc. 150.00 60.00 S.M.

Painting two coats of enamel paint over priming coat (including priming coat) on wall after

113 removing entire surface dirt, dust foreign matter & also incl. preparing the 150.00 90.00 S.M.

surface even & sand papered smooth etc. comp.(M.R.)

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & applying two coats of weather shield max paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour approved by architects, on exterior

surfaces of the building including scaffolding, preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.

114 This can be achieved by brushing with a wire/ stiff coir brush, followed by water jetting if required. Fill up 500.00 82.00 S.M.

all minor cracks and defects with white cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty is not

Minimum 4-6 hours duration is required between each coat of weather shield max paint

Box Cutting the road surface to proper slope and camber for making base includinng removing the

excavated stuff and depositing on the road side slope as directed up to 50 mt. lead.

Preparation of subgrade with Compacting, Levelling and consolidation of subgrade with miniroller /plate

116 vibrator machine including watering and filling in depressions which occur during the process as directed 500.00 9.00 S.M.

by engineer in charge.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, ramming & consolidation etc.

Providing, Supplying & Sprading of Gravel in Play area including dressing etc. comp.

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted thickness over the base

119 including necessary compaction, watering etc. complete. Item includes leveling by using vibratory plates 50.00 1016.00 C.M.

compacted machine and as directed by engineer in charge.

Providing & laying Granular sub base (GSB)confirming to Grading-V of Table 400.0 of compacted thick

of 150mm with specified graded stone metal and sand mixed in place and laid with mechanical means

120 spreading with motor grader and compacting with vibratory roller having minimum 80-100 KN static weight 50.00 1469.00 C.M.

to acheve desired density of 98% of MDD including all material, labour, machinery with all leads and lift

Removing & resetting existing readymade c.c. kerb stone of required size & thickness in line .level and in

truly vertical position including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth

121 pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including watering etc. complete and as 50.00 56.00 R.M.

directed by engineer in charge. (M.R)

Removing and Resetting of Paver block of walk-way with necessary sand / pana filling and make in line

and level with necessary vibrating using compactor machine.

Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x 380mm) purchased from

SMC's approved paverblock manufacturer & setting in line, level and in truly vertical position, including

123 filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of 75.00 228.00 R.M.

cement : 1 part of coarse sand) including watering etc. complete and as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 10.00 274.00 R.M.

Providing interlocking type Rubber moulded cement concrete paver block of approved shape, design

& colour having 60mm thickness (M-35) purchased from SMC's approved paverblock manufacturer only &

124 fixing of fine sand bedding. Item includes levelling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments,tools, plants, watering, cleaning etc. complete.

With colour 50.00 524.00 S.M.

Without colour 150.00 524.00 S.M.

Providing & fixing interlocking type Cement Concrete paver block of approved shape & design having

60 mm thickness (M-40) purchased from SMC's approved paverblock manufacturer only on fine sand

bedding. Item includes leveling by using vibratory plates compacted machine. Item also includes all

materials, Labour, euipments, tools, plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 3.00 714.00 S.M.

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 sand:3 graded stone agg.

126 mm nominal size) & Vaccuum Dewatering technique including floating surface with a skim powder 10.00 5981.00 C.M.

floater, curing etc. complete.

Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm

127 nominal size) & Vaccuum Dewatering technique including floating surface with a skim powder floater, 2.00 5245.25 C.M.

curing etc. complete.

Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with filling of epoxy sealent as

directed by engineer in charge

WATER SUPPLY & SANITARY ITEMS

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor levels, size 580mm incl.

mm size "P'or "S" trap for water closet squatting pan joining the trap with the pan & soil pipe in

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern of approved colour For all

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S trap

including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (seat and

cover to be measured and paid for separately) (A) Viterous china pattern - I (i) in approved colour

Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and

rubber buffers (B) Plastic seat and cover.

Providing & fixing wash basin with single hole for pillar tap at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same incl. fittings such as pillar tap, capstan head

133 screw down high pressure with screws, shanks & back nuts, C.P. Brass waste trap, screw down stop 10.00 2132.94 No.

tap 15 mm. dia. etc. complete. (A) Vitreous china flat back wash basin 550 mm.x 400 mm. size in

approved colour For all Floor

Providing & fixing Urinal or approved quality including conecting the Urinal with waste pipe, tap etc.

complete. (A) White earthenware flat back or corner type size 430 mm x 260mm x 350mm

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels, mounted on 6 mm. th.

135 A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws and washers etc. For all 12.00 859.41 No.

Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished bright etc. comp.-(A)

15mm dia. For all Floors

Providing and fixing waste Pipe for Washbasin or sink (A ) 32 mm Dia

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels, size 500mm x 400 mm

138 incl. 100 mm size "P'or "S" trap for water closet squatting pan joining the trap with the pan & soil pipe in

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar ,HindWare 20143 7.00 3277.39 No.

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S trap with

139 normal closing seat cover L bend ncluding jointing the trap with soil pipe in cement mortar 1:1 (1 cement :

1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278, HindWare sleek 20011, Jaquar-

CNS-WHT-751P180SPPZ

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber & water tight C.I. cover

with frame of 300mmx300mm size (inside) with weight includ. plastering smooth inside & outside 15mm.

th' in C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm x 100mm Size -P type

(A) 100mm x 100mm Size -P type 7.00 1292.19 No.

(B) 150mm x 100mm Size- P Type 0.00 1246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber & water

tight Pre cast R.C.C. cover of 300mmx300mm size (inside) includ. plastering smooth inside &

outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps--

(A) 300mm x 300mm Size -P type 7.00 1098.05 No.

(B) 150mm x 100mm Size- P Type 0.00 1052.77 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm & 450 mm deep

sewer trap chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M.

142 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone 1.00 3166.77 No.

aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not less than

kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 3.00 2915.61 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 2.00 233.85 Each

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5 with cement plaster

mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

143 4 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not 3.00 2932.93 No.

less than 38 kg. On top etc. comp. Inside dimension,455 x 610 mm &450 mm deep for single pipe

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 15.00 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 242.39 Each

Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-2556 (Part-2 ) with C.I.

144 hangers and 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange complete

including cutting and making good the walls and floors wherever required.

Make -Cera,Parry ware, Jaquar, HindwareMake- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT- 13261H ,HindWare BACK SMALL

Providing & fixing Wash Hung basin with single hole for pillar tap, Size- 550 x 400 mm at all floor levels,

145 with C.I. or M.S. Brackets painted white incl. cutting holes & making good the same etc. complete. For all

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar SLS- WHT -6801 ,HindWare10004

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm thick in bath room

146 with polished wall flange at end of bars with heavy duty anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N ,HindWare F880007 10.00 924.24 No.

Providing & fixing S.S.towel rail of 600 mm long approved make including, providing & fixing C.P. brass

screws, making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM ,HindWare F880005T 10.00 1100.42 No.

Providing & Fixing stainless steel recessed type Soap dish of approved make. Including providing &

fixing screws, washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N ,HindWare F880011 10.00 839.91 No.

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter chrome plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587 ,HindWare F160109 7.00 1009.90 No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

152 Providing Metropole Flush Valve Dual Flow 40mm Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ ,HindWare F860075 7.00 3500.99 No

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 ,Parry ware T9824A1&T9823A1,

Jaquar FLR 5083 KN , CONCEALED BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK 7.00 2056.47 No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper connecting pipe 450 mm

154 long and nuts, washer and brass flange complete, including cutting and making good the wall where

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare

Cat. No.: F160144

Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N

,HindWare F650013

Providing and fixing C.P. Brass pillar cock with copper connection ,C.P. Brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.: F650003, Jaquar FLR-5011N

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of following nominal internal

diameters incl. Testing of pipes and joints etc. Comp

Providing & laying in trenches galvanised mild steel tubes(medium grade) TATA / ZENITH / ASIAN /

JINDAL MAKE of the following nominal bore & tube fittings etc. comp..

Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild steel tubes(medium grade)

160 TATA / ZENITH / ASIAN / JINDAL MAKE of the following nominal bore, tube, fittings & clamps incl.

making good the wall ceiling and floor etc. complete.

Providing & Fixing gun metal check or non return full way wheel valve at all floors levels, etc.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

162 Decorative wall paintings with designing, painting at place with all necessary materials 2000.00 63.00 Sq.ft.

163 Providing and fixing Supply Pipe for Washbasin or sink 50.00 80.00 No.

164 Providing and fixing Jet Sprey Cock at all floor level etc. complete. 25.00 500.00 No.

165 Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 12.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 12.00 200.00 No.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight not less than 35 Kg. etc.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste discharge system at all floor levels

incl. All fixtures like bends, tees, shoe etc. jointed with resin of approved brand & manufacture etc. comp.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of Prince/Supreme/Jain/Astral/

168 Tulsi/Finolex make for rain water at all floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. (M.R.)

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or equivalent as approved by

169 angineer-in-charge. Pipe shall be fixed on the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex make for

water supply line at all floor levels incl. fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp at every two meter C/C

or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm diameter with jali of the

171 following nominal diameter of self cleaning design with C.I. scread down or hinged grating including the 15.00 586.27 No.

cost of cutting and making good the walls.

Providing & Fixing in position PVC Cowl vent to pipes of Prince/Supreme/Jain/Astral/Tulsi/Finolex

Providing & fixing M.S. Holder Bat clamps at all floor levels of approved design to C.I. Or S.C.I pipes

173 including the cost of cutting holes & making good the wall etc. Complete - 100 mm. dia. (M.R.) 25.00 30.00 No.

Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved design to C.I. Or S.C.I pipes

174 including the cost of cutting holes & making good the wall etc. Complete - 100 mm. dia. (M.R.) 15.00 20.00 No.

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I. or PVC pipes including the

175 cost of cutting holes & making good the wall etc. Complete - 100 mm dia as per architect instructions.

(C) 110 mm dia to upto 150 mm dia 15.00 90.00 No.

(C) 150 mm to 200 mm dia 15.00 98.00 No.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing with cement plaster

176 mm avg thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per instruction given by Eng. incharge.

(A) 75 mm PVC PIPE 5.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 20.00 180.00 R.M.

Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc. complete on terrace.

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering, vibrating, curing &

mixed with approved water proofing cement compound or "CEMWET"or"PIDICRETE LW"integral water

proofing admixture as water proofing agent to be mixed with 50 kg. cement bag shall be as recommended

by the manufacture of the water proofing material, concrete work for top, bottom slab & side pardi for

Under ground Tank & Item incl. Necessary excavation & refilling the available earth, 15 cm th' C.C 1:4:8

178 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per design, 10mm.th.

water proofing cement plaster in C.M. 1:3 with smooth finishing,watering etc.Comp.to all inner face &

bottom of tank curing etc. comp. incl. Locking arrangement, outlet, inlet, overflow & wash out pipe

arrangement as necessary & C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per structural

drawing excluding Steel & as directed by Engineerin- charge

Underground tank 15000.00 6.87 Lit.

Providing and filling in depressions of Bath and W.C. At all floor levels, after completing plumbing work of

179 pans, pipes,traps etc.with cinder or fly ash as directed by Engineer in charge etc. comp.. 5.00 500.00 C.M.

NOTE :- (1) The whole work is to be executed through specialized agency with a guarantee of 10 (Ten)

180 years given on a prescribed proforma duly stamped (2) The rate shall include for work at all floors &

conducting water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed

portions of W.C.,kitchen and the like consisting of : (a) I course of applying cement slurry @ 4.4 kg/sqm

mixed with water proofing compound conforming to IS : 2645 in recommended proportions. (b) II course

of a layer of plaster in C.M. 1:3 with water proofing compound confirming to IS:2645 about 25 mm. th' in

the floor of the depression & about 18mm th' On the side walls of the depression up to the floor level,

water proofing plaster about 18 mm. th' be continued on the walls above the floor level for a height of 600 125.00 296.00 S.M.

mm. with surface suitable to receive further treatment (c) Finishing top with stone aggregate 10mm to

12mm nominal size spreading @0.008 C.M./S.M., thoroughly embedad in plaster layer. as per

specifications & instructions of Engineer in charge (Cement consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing treatment including preparation of

surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations. (a)

Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary

water proofing compound comforming to IS:2645 over the R.C.C. slab including cleaning the surface

before tratment. (b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with

50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally covered by jointless

cement plaster 20mm th. in C.M. 1:4 added with special water proofing compound confirming to IS:2645

& top smooth finished with trowel with false chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining wall up to height of about 300 mm in a shape of

quarter round vata Incl. curing etc.for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours durati

(c) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for

curing and for final test. All above operations to be down in order and as directed and specified by the

engineer-in-charge. With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(Cement consumption 0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and horizontal surfaces like consisting of (a) I

course of applying cement slurry 4.4 kg per sq.mt. mixed with water proofing compound confirming to

IS:2645 in rcommended proportions. (b) II corse of 20mm cement plaster 1:3 mixed with water proofing

181 compound in recommended proportion (c) III course of applying blown or / resideal bitumen applied hot at 50.00 505.00 S.M.

1.7 kg per sqm of area. (d) IV course of 400mm micron th. PVC sheet. (Overlaps at joints of PVC sheet

should be 200mm wide and pasted to each other with bitumen about 1.7 kg./ sqm.)

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including neat cement

finishing, watering etc. complete..

183 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 20.00 101.91 No.

Providing & Fixing chromium plated brass half turn flush cock at all floor levels, of approved quality incl.

fixing in pipe line etc. Comp.-- 25 mm dia.

185 Providing & Fixing abonite ball cock of approved qualities directed etc. comp. (A) 25 mm. dia. 25.00 102.91 No.

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on vertical surface.Steel

work welded in built up sections, framed work including cutting, hoisting, fixing in position and applying a

186 priming coat of red lead paint in beams & joists channels angles, tees, flats with connection plates or 3.00 2677.00 Smt.

angle cleats as in main & cross beams, hip & trussed purlins connected to common raffers & the like.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing black board on walls of 1.8mt.x1.2mtsize made up to 12 mmth.B.W.P .Plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) fixed with teak wood beading of

187 mmx 50mm size, rubbing & sanding comp., incl. applying two coats of black board paint over a priming 1.00 4193.00 No.

coat on plywood & French polishing the frame all round etc. Comp. as per instruction of Engineer in

Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top 18mm thick (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) commercial plywood with 1.0mm thick

lamination sheet fitting with teakwood moulding table top supported on 3" x 3" teakwood leg & 3" x 11/2"

188 teakwood framing top and bottom with french polish labour work hardware etc. as per site in charge 1.00 14774.00 No.

instruction and as per drawing.

Providing & Fixing Librarian table with 18mm thick commercial plywood (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) )with 1.0mm thick lamination sheet table top supported on 2" x 2"

teakwood leg & make 3 nos. drawers of 1' 3" width on both side with necessary french polish hardware

labour etc. as per site incharge instruction and as per drawing ( Size 4' x 2'-6" x 2'-6", all framing

other then legs are teak wood of size 2" x 1")

Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to

mm th.ply (using IS 710 Marin ply) with 1 mm thick outside green board &

190 0.8mm backside white laminate & with good Quality of adhesive with 3.00 5195.00 No.

appropriate fittings of Alluminium fittings or teak wood bedding 65 mmx 50mm

size, rubbing & sanding comp., as per instruction of Engineer in charge (M.R.)

Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick with appropriate fittings and

Alluminium fittings comp., as per instruction of Engineer in charge (M.R.)

Providing & Fixing simple 12mm thick commercial plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) Rack of size 6' x4' and depth 1'-6" 5 Nos. horizontal partition, supported

2" x 1" framing with necessary french polish hardware labour etc. as per site incharge instruction and as

Providing & Fixing fitting commercial 8mm thick plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood

Stock or century) magazine stand of Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable lag

193 support and horizontal simple 2" x 1" teakwood patti for magazine support with necessary french polish 1.00 6745.00 No.

hardware labour etc.as per site in charges instruction and as per drawing.

Cutting out cracks of wall or terrace to V section ,cleaningout, grouting with cement and sand slurry 1:3 (1

cement : 3 sand ). at any height

Providing and fixing Soft Pin Board With Aluminium Frame As per Design by architech and engineering in

charge for Fix Soft Pin Board

Providing & fixing of 50% Blackout window curtain (Diamond Pattern) with Cloth aster with S.S. 25mm

196 Hollow Pipe With Covers.As per attached drawing & instructed by in charge Consultant. 30.00 870.00 S.M.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light

weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the

best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture

Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size

of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of

size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length

600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate

ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including,

cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of

size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm

G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre

to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted

with polyester baked paint, for all heights, as per specifications, drawings and as directed

by engineer-in-charge.Note:- Only calcium silicate false ceiling area will be measured from wall

to wall. No deduction shall be made for exposed rames/opening (cut outs) having area less than

0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine

fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m

KC.for the best thermal Insulation

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Supplying and Fixing of Suspended ceiling system components which includes Single Layer Boarding with

12.5mm thick USG Boral Standard Plasterboard This includes of USG Boral Thundersteel Perimeter

Channel (0.50mm thick having one flange of 20mm and another flange of 30mm and a web of 28mm)

screw fixed to brick wall/partition with the help of approved screws at 600mm centers. Then suspending of

USG Boral Thundersteel Intermediate channel (45mm x 0.90mm thick with two flanges of 15mm each)

from the soffit at 1220mm centers with of USG Boral Thundersteel Ceiling Angle (25x10mmx0.50mm

thick) fixed to RCC Slab with of USG Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia 40mm long

Anchor Fastener @ 600mm Centers, respectively. USG Boral Thundersteel Ceiling Section (having web

of 51 mm and two flanges of 27mm each) are then fixed to the of USG Boral Thundersteel Intermediate

channel with the help of connecting clip (2.6mm Dia) and in perpendicular direction to the USG Boral

Thundersteel intermediate channel atfor 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max paint

1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm

and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting

on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges

light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening

CEMENT SHEET CEILING

Providing and fixing of Cement sheet ceiling using aluminium channel & pipe, screws etc. complete with

all material, labour with all lead, lift and transport. and finished by approved shade of plastic paint (Basic

Rate for 8 mm plain cement sheet : 35 rs./sqft.)and finished and complete the work satisfactorily as per

instruction of architect or Engineer-in charge And as per " Architecture" detail.

Providing and filling Epoxy grout of approved or suggested brand by consultant / Engineer in charge in

200 4mm to 6mm thick tiles joint including spacer with cleaning of joint by vacuum or blower etc 30.00 40.00 R.MT

Applying polymer modify mortar in proportion at 1:2(one part cement: 2 part white sand(sweet water) with

chemical(SBR) dosage of minimum 5 litre pe bag of cement. Also apply bonding agent prior to polymer

201 modify mortar in proportion of (1:1)(1 part SBR : 1 part cement) using Roof, MC and FOSROC

Beam / Columns 10.00 1830.00 S.M.

Ceiling 10.00 1830.00 S.M.

Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar after openning crack in "V"

202 grove, Making Surface dust free, with a bond coat of polymer as per the data sheet for crack repairing 25.00 120.00 R.M.

cracks less than 8mm

Cutting out cracks of roof terrace to V- section , cleaning out, wetting , grouting with cement

and sand slurry 1:3 (1-cement 3-sand )

Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed with celling rebar column as per

directed by enginner incharge rate excluding the rebar cost .

Providing and filling the expansion joint by polymer confirm to BS4254-1983 as per required shade and

specification by making groove of 50 mmx12.5mm lather by cutting or by repairing groove and removing

mortar dropor anyother foreign materials including applying primer and filling required size (over size of

joint PU foam etc. complete.)

Providing and fixing rebar of following diameter using chemical grout of Swanchore/Hilti/Fischer or

equivalent make including cost of all equipments, tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall be strictly followed, which shall be submitted and got

approved from the authority prior to start of work. The rate shall also include cost of drilling of hole of

205 required diameter and depth as mentioned in manufacturer's specification, cleaning the hole with required

air blower and other necessary tools and tackles, positioning, providing and grouting chemical, allied

fixtures and fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item includes

necessary scaffolding, staging, labour, tools and equipments, etc. complete as directed by the engineer-

Carring out plinth treatment to post construction / existing structure by spraying chemical solution

for termite control treatment including labour and material consistment with ISI specification. Using

Chlordene and Chiorpurfiles 20 EC. As per 6131_paret-II Consentration Weight one percent is

recommended i.e. one litre 20 EC chemical emulsion with 19 liter give 1% concrentration inclusive

of one litre chemical emulsion appication at the rate of 5 litre chemical / Sqm of surface is recommended

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Anti-Termite System:Providing and laying of permanent piping technology anti-termite

treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm

O.D. & 6.4 mm 1.D. with inbuilt pressure compensation chip every 30 cm interval in the

tube, having working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and

nails. The LLDP pipe shall be installed at the entire periphery of the building and at internal network of

building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted as per

building layout ) & Ends of loop pass through a PVC elbow of minimum 32 mm ID at junction box of

207 wall and floor level, entering into a steel reinforced grooved flexible pipe of minimum 22 mm 15.00 134.33 S.M.

ID leading into junction box and the loops shall terminate in junction boxes & test every junction

during injecting chemi 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of

size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length

600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on perip

RCC Core Cutting is about making precise, circular cuts for creating holes of required diameters for

Rehabilitation in civil works. The core drilling rod is fitted with diamond pieces at the drilling end. The core

cutting machine can be used for both horizontal and vertical hole making purposes.

Dr. Fixit Raincoat Select or equivalent as approved by engineer incharge ,is composed of

high quality acrylic emulsion polymer, light fast & weather durable pigments, properly

selected & graded fine fillers, additives & biocides. It is used as a waterproofing &

protective coating for exterior walls of the buildings because it forms higher film thickness.

209 It has excellent flexibility, breathability, water & dust resistance, crack-bridging, 0 222.12 SM

weathering durability and an excellent resistance to the growth of micro organisms.

PRIMING:Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is Not recommended. Minimum 4-6 hours duration is required

between each coat of Dr. Fixit Raincoat Select.

TOTAL AMOUNT RS.

TOTAL AMOUNT RS.

EXECUTIVE ENGINEER

SIGN OF CONTRACTOR NEW EAST (SARTHANA) ZONE

SURAT MUNICIPAL CORPORATION