SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK WITH 05(FIVE) YEARS O&M AT PALI SEWAGE PUMPING STATION OF DRAINAGE DEPARTMENT.

Name of Work:- SETC OF ELECTRICAL, MECHANICAL AND

INSTRUMENTATION WORK WITH 05(FIVE) YEARS O&M

AT PALI SEWAGE PUMPING STATION OF DRAINAGE

LAST DATE OF SUBMISSION OF TENDER FEE : From Dt. 29-01-2026 to

&E.M.D IN HARD COPY 05-02-2026 up to

(BY SPEED POST / RPAD THROUGH POSTAL AUTHORITY ONLY)

LAST DATE OF ONLINE SUBMISSION OF : Up to Dt. 28-01-2026 up

TENDER (ALONG WITH NECESSARY to 18.00 Hrs.

DOCUMENTS, CERTIFICATES ETC.)

SCHEDULE-B2 OPERATION & MAINTENANCE WORK ..............................................................

1 The Schedule of quantities and Rates are to be read for the purpose of

pricing in conjunction with instructions to tenderers, technical

specifications, drawings and conditions for contract.

2 The price quoted in the summary of costs, sheets of schedule of quantities

and rates shall be of all-inclusive value for the work described including

all cost and expenses which may be required for the execution of the work

described together with all general risks, liabilities and obligations set

further or implied in the documents on which the tender is based.

3 The quantities furnished are approximate. In the event of actual quantities

varying from those furnished herein or items deleted or added the

percentage (Plus / minus) quoted for the entire work shall remain firm

and no extra claims in this respect will be entertained. The payment shall

be made based on the actual quantities in the complete work.

4 Percentage (Plus/Equal/ Minus) quoted by tenderer shall be firm even if

the scope in the contract reduced/increased.

5 Percentage (Plus/Minus) and the total amount entertained in the

5 Percentage (Plus/Minus) and the total amount entertained in the

summary of cost, sheet of schedule quantities and rates shall be given on-

6 Detailed specifications of items of work are described in the Technical

Specifications. It gives guidelines to the reference of relevant clauses of

specification and mode of measurement. Tenderer shall read this in

conjunction with other technical specifications and quote rates

7 The Quality Assurance Plan provided shall be strictly followed.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK

WITH 05(FIVE) YEARS O&M AT PALI SEWAGE PUMPING STATION OF

DRAINAGE DEPARTMENT.

I/We, the undersigned, hereby tender for carrying out the work described in the schedule

subjected to the conditions mentioned in various sections and subsections of this tender

Should this tender be accepted, I/We hereby agree to abide by and to fulfill all the terms and

provisions of specifications and conditions of contract and default thereof of forfeit and pay

to Municipal Corporation the sum of money mentioned in the said condition.

The Earnest Money Deposited by me / us with tender may be forfeited to The SURAT

MUNICIPAL CORPORATION, if I /We do not deposit security deposit in accordance with

the relevant clause of the conditions of contract, otherwise the said sum of

3,04,600.00/-(Without GST) shall be retained by the Municipal Corporation as any

account of such security as, aforesaid.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

3 . NAMEOFWORK: -

SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION WORK WITH

05(FIVE) YEARS O&M AT PALI SEWAGE PUMPING STATION OF DRAINAGE

ESTIMATED COST: 3,04,59,300.00 /-[Excluding GST]

TENDERER’S BID FOR CAPITAL WORK:

PERCENTAGE EQUAL/ ABOVE/BELOW OF Rs. 2,07,46,300.00/-

INFIGURES:(STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

TENDER AMOUNT (IN FIGURES): Rs.

TENDER AMOUNT (in WORDS): Rs.

TENDERER’S BID FOR O&M WORK:

PERCENTAGE EQUAL/ ABOVE/BELOW OF Rs.97,13,000.00/-

INFIGURES: (STRICTLY ONLINE)

INWORDS: (STRICTLY ONLINE)

TENDER AMOUNT (IN FIGURES): Rs.

TENDER AMOUNT (in WORDS): Rs.

SIGNATURE AND SEAL OF THE CONTRACTOR:

NAME AND ADDRESS:

SIGNATUREOFWITNESS:

NAMEANDADDRESS:

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

4. SCHEDULE- B ABSTRACT

Sr. No. Description Total Amount

Sr. No. Description Total Amount

A Electro-Mechanical (Capital) Work for PALI SPS

B O&M Work for PALI SPS

Total Amount of Schedule B

Total Amount of Schedule B

(Excluding GST)

SCHEDULE-B1 ELECTRO-MECHANICALWORK

SR. DESCRIPTION QTY. UNIT UNIT TOTAL

MECHANICAL ITEMS

1 NON CLOG SEWAGE 4 Set 7,99,518.02

SUBMERSIBLE PUMP SETS -1

Supply, installation ,testing and

commissioning of Non Clog sewage

Submersible Pump Sets having with

motor as per specification.

Capacity : 120 LPS , Head : 19 MT.

(Approx. 45 KW, 60 HP)

2 KNIFE GATE VALVE 4 Set 37,923.73

Supply, Installation, Testing and

Commissioning of Manually operated

Knife gate valves for the discharge line

of Pump Sets as per Detailed Tender

Size : 250 mm Día

Location : Delivery of Pump sets

Mode of Operating : Manual

3 NON RETURN VALVE 4 Set 27,982.05

Supply, Installation, Testing and

Commissioning of Non Return Valve

as per detailed tender specification.

Size : 250 mm Día

Location : Delivery of Pump sets

4 C.I. DISMANTLING JOINT- for 4 Nos. 11,059.32

Supply, Installation, Testing and

Commissioning of C.I. Dismantling

Joint as per IS 1538, Design

Temperature: 50 C for Pump Delivery.

Size : 250 mm Dia

5 MECHANICAL COARSE BAR 1 Set 23,70,718.00

(A) Supply, Installation, Testing and

Commissioning of Multi Rake Type

Coarse bar screen for SPS as per

Detailed Tender Specification

1) Channel Width : As per Site

2) Channel Depth : As per Site

3) Bar Spacing : 20 mm

4) Angle of Inclination :

7) Avg. Flow : 8.68 MLD

8) Peak Factor :

6 C.I. FITTINGS & SPECIALS 21500 Kgs. 58.58

Supply, Installation, Testing and

Commissioning of C.I. double flanged

suction, delivery line & Common

header pipe conforming to IS 7181or

IS 1537 , Class B technical

specifications. The length and size of

the pipes and specials are indicative

and shall be designed and proposed as

per the pump model.

7 KNIFE GATE VALVE 1 Nos. 2,32,457.63

Supply, Installation, Testing and

Commissioning of Knife Gate valve

for Common Header Line as per

Detailed Tender Specification

Size : 600 mm Día

Location : Common Header

Mode of Operation : Manually

8 NON RETURN VALVE 1 Nos. 2,19,668.94

Supply, Installation, Testing and

Commissioning of Non Return Valve

as per Detailed Tender Specification

Size : 600 mm Día

Location : Common Header

9 C.I. DISMANTLING JOINT 1 Nos. 51,315.25

Supply, Installation, Testing and

Commissioning of C.I. Dismantling

Joint as per IS 1538, Design

Temperature: 50 C

Size : 600 mm Dia

10 AIR VALVE 1 Nos. 16,925.58

Supply, Installation, Testing and

Commissioning of Air valve for

Common header line as per Detailed

Tender Specification

Size : 100 mm Día

11 LIFTING ARRENGMENT 1500 Kgs. 243.16

Supply, Installation, Testing and

Commissioning of Lifting Arrangment

screen S.S material for SPS as per

Detailed Tender Specification

12 3 TON EOT 1 Set 5,59,792.50

Providing & erecting Single girder

type fully electrically operated E.O.T.

crane with electrically operated hoist,

class II duty, geared travelling trolley

with seven meter lift complete with

long travel rail track (40 mm sq. bar),

moving or cross girder, all three

motions electrically operated by

suitable rating motor IP 54, control

panel & down pendant control block,

brake, safety device, cables form motor

to starter panel & other required

accessories & tested as per IS

Specifications.

Capacity : 3 Tonn, Span : As per site

13 2 TON EOTProviding & erecting 1 Set 5,11,312.50

Single girder type fully electrically

operated E.O.T. crane with electrically

operated hoist, class II duty, geared

travelling trolley with seven meter lift

complete with long travel rail track (40

mm sq. bar), moving or cross girder, all

three motions electrically operated by

suitable rating motor IP 54, control

panel & down pendant control block,

brake, safety device, cables form motor

to starter panel & other required

accessories & tested as per IS

Specifications.Capacity : 2 Tonn,

Span : As per site

14 M.S. FABRICATION WORK 10000 Kgs. 98.98

For Grills, Jalias , I Beams, Grating at

Various Opening, ISMB / Girder

Channels for EOT Crain etc.

15 S.S. FABRICATION WORK 15000 Kgs. 243.16

Various S.S Fabrication Work at

Pumping Station, double flanged

suction, delivery line & Common

header pipe, Fasteners for Fittings for

Manual Screen and Ladder Etc.

16 C.I. WALL THIMBLE MOUNTED 5 Nos. 4,23,728.81

Supply, Installation, Testing and

Commissioning of of Wall Thimble

mounted sluice gate as per Detailed

Tender Specification

Size : 800 mm (w) x 800 (h) mm

Mode of Operation : Electrically

Location: Inlet, Screen Channel,

Partition, Bypass

17 LEVEL TRANSMITTER 1 Nos. 60,320.23

Design, Supply, Installation, Testing

and Commissioning of Non Contact

Ultrasonic Type Level Transmitter as

per Detailed Tender Specification

Range : 0 - 15 Mtr.

18 LEVEL INDICATOR 1 Nos. 17,895.18

Supply, Installation, Testing and

Commissioning of Float and board

type level Indicator with all accessories

as per Detailed Tender Specification

Range : 0 - 15 Mtr.

19 Supplying & Fixing SMC Chequered 20 Sq. 5,897.37

plate having 12 mm thickness, made Mt.

out of SMC Confirming to IS 13410 &

by Hot press Compression Moulding

technique Suitable cut & fixed with

MS Angle Frame to Fit Trench Widths

as per site requirement approved. by

engineer incharge.

20 Supply, Installation, Testing & 20 Sq. 580.15

Commissioning of FRP Chequred Mtr

21 Supply, Installation, Testing and 250 Rmt. 1,784.69

Commissioning of FRP Railing as per

Detailed Tender Specification

22 ELECTROMAGNETIC FLOW 1 No. 3,06,254.22

Supply, Installation, Testing and

Commissioning of Electromagnetic

Flow Meter for Common Header as per

Detailed Tender Specification

23 DEWATERING PUMP 1 Nos. 1,64,952.19

Supply, testing & commissioning of

Dewatering Pump.

Capacity : 10 LPS, 19 Mtr Head,

24 Supplying & erecting approved make 1 Nos. 15,129.77

self-priming domestic monoblock

water pump with 1 H.P motor, suitable

for operation on 230 volts, 50c/s. AC

supply with metallic flange, and M.S.

impeller delivery for lifting line water

to over head tank

25 CHAIN PULLEY BLOCK 1 Nos. 18,422.40

Supply, Installation, Tesitng and

Commisioning of 2.0 Ton Chain

Pulley Block with Triple gear

arrangement, lifting hook, load chain

& locking device for Lifting of

Manually Operated Screen and

Dewatring Pump.

Lift (6m + 1m), Capacity : 2 Ton

26 Supply, Installation, Testing and 1 Nos. 12,711.86

Commissioning of Grass Cutter with

30 mtere cable for SPS

27 Supply of Aluminium Self Supported 1 Nos. 4,661.02

"A" Type ladder (8 Feet)

28 Flexible Garden Pipe 100 Feet 29.66

29 PRESSURE GAUGE 4 Nos. 3,042.12

Design, Supply, Installation, Testing

and Commissioning of Diaphragm

sealed Pressure Gauge. (Each

Range : 150 mm Dial- 0 to 4 Kg/cm2

30 PRESSURE TRANSMITTER 1 Nos. 29,438.47

Design, Supply, Installation, Testing

and Commissioning of Pressure

Transmitter. (Common Header)

31 TOOLS & TACKELS 1 Lot 51,713.42

Supply of various tools and tackles as

described in Technical Bid.

32 Construction of Necessary size M 20 1 Lot 73,343.17

Grade RCC Chamber with all requires

materials for Installation of Common

33 Construction of Necessary size M 20 1 Lot 73,343.17

Grade RCC Chamber with all requires

materials for Installation of Flow

ELECTRICAL ITEMS

1 SWITCH FUSE UNIT 1 Lot 12,881.78

Supply, Installation, Testing and

Commissioning of 400 A FP Switch

Fuse Unit with SS Enclouser

2 POWER MOTOR CONTROL 1 No. 17,43,159.00

SITC of LT panel as per tender

Specifications, Data sheet, IS and as

per given description etc.

3 JUNCTION BOX 4 No. 19,695.00

Supply, erection, testing &

commissioning of Junction Box for

Pumpset as per tender Specifications,

Data sheet, IS and as per given

description etc.

4 APFC PANEL 1 No. 1,39,766.83

50 KVAR Automatic Power Facor

Correction panel as per tender

Specifications, Data sheet, IS and as

per given description etc.

5 Supply, laying, connection, testing and 160 Mtr 963.54

commissioning of heavy duty, 1.1 KV

XLPE AL conductor armordered -

SFU to SPS PMCC Panel (2 Run) as

per Specification and IS 7098 Part I

Size : 3½ c x 300 sq.mm

6 Supply, laying, connection, testing and 300 Mtr 145.44

commissioning of heavy duty, 1.1 KV

XLPE AL conductor armordered-

PMCC Panel To JB Pump sets (2 Run)

as per Specification and IS 7098 Part I

Size : 3 c x 35 sq.mm

7 Supply, laying, connection, testing and 100 Mtr 213.11

commissioning of heavy duty, 1.1 KV

XLPE AL conductor armordered-

PMCC Panel To APFC Panel (1 Run)

as per Specification and IS 7098 Part I

Size : 3½ c x 50 sq.mm

8 Supply, laying, connection, testing and 100 Mtr 297.95

commissioning of XLPE Copper

conductor armoured-for industrial

socket, External LDB, Instrument

Size : 4 c x 10 sq.mm.

9 Supply, laying, connection, testing and 80 Mtr 86.86

commissioning of XLPE Copper

conductor YWY- other work

Size : 3 c x 2.5 sq.mm.

10 Supply, laying, connection, testing and 80 Mtr 142.41

commissioning of XLPE Copper

conductor YWY- Industrial points

Size : 4 c x 4 sq.mm.

11 Supply, laying, connection, testing and 300 Mtr 97.97

commissioning of XLPE AL

conductor armoured-for Street Ligth in

Size : 4 c x 10 sq.mm.

12 Supply, laying, connection, testing and 80 Mtr 81.81

commissioning of PVC CU conductor

Unarmoured-for Street Ligth in SPS

Size : 4 c x 2.5 sq.mm.

13 Supply, laying, connection, testing and 200 Mtr 347.46

commissioning of XLPE Copper

conductor YWY- Actuator panel and

other panel/work as per IS

Size : 16 c x 1.5 sq.mm.

14 Supply of FRLS PVC Insulated ISI 400 Mtr 42.47

Mark Cu Conductor Two Wire 1.5 Sq.

mm. for Electrification work of

Pumpin Station.

15 CABLE TERMINATION 4 Nos. 1,079.69

Supply of connection, testing and

commissioning of Double

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets with necessary tools and

equipments as specified in

specifications and IS.

Termination Using Double

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered - SFU to

SPS PMCC Panel (2 Run) as per

Specification and IS 7098 Part I

Size : 3½ c x 300 sq.mm

16 Termination Using Double 4 Nos. 217.15

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered-PMCC

Panel To JB Pump sets (2 Run) as per

Specification and IS 7098 Part I

Size : 3 c x 35 sq.mm

17 Termination Using Double 4 Nos. 270.68

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered-PMCC

Panel To APFC Panel (1 Run) as per

Specification and IS 7098 Part I

Size : 3½ c x 50 sq.mm

18 Termination Using Double 16 Nos. 153.52

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE AL conductor

armoured-for industrial socket,

External LDB, Instrument panelSize :

19 Termination Using Double 16 Nos. 85.85

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE Copper conductor

YWY- other work

Size : 3 c x 2.5 sq.mm.

20 Termination Using Double 16 Nos. 132.31

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE Copper conductor

YWY- Industrial points

Size : 4 c x 4 sq.mm.

21 Termination Using Double 16 Nos. 129.28

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE AL conductor

armoured-for Street Ligth in SPS

Size : 4 c x 10 sq.mm.

22 Termination Using Double 16 Nos. 89.89

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE/PVC Copper

conductor YWY- other work

Size : 4 c x 2.5 sq.mm.

23 Termination Using Double 16 Nos. 415.25

compression brass/steel cable glands

and crimping type bimatlic lugs /

sockets of XLPE Copper conductor

YWY- Actuator panel and other

panel/work as per IS

Size : 16 c x 1.5 sq.mm.

24 Providing & laying. R.C.C. Hume pipe 10 Mtr. 342.37

for cable to be laid 90 cms. below

ground across the road crossing or on

floor with necessary material in an

approved manner and making the

ground as per original. (A) 300 mm dia

25 Providing & laying. R.C.C. Hume pipe 10 Mtr. 262.77

for cable to be laid 90 cms. below

ground across the road crossing or on

floor with necessary material in an

approved manner and making the

ground as per original. (B)150 mm Dia

26 Making trench in soft soil of suitable 50 Rmt. 46.22

width of 90 cms deep for laying cable

or locating the fault all over the run

and backfilling the same and making

the surface as normal ground.

27 MAINS WIRING: 150 Rmt. 58.20

Mains with 1.1kV grade FRLS PVC

insulated ISI marked stranded copper

conductor wire in following type of

pipe to be erected concealed in /flushed

on wall/ ceiling with 1.5 sq. mm copper

conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size.

(A) with medium class Rigid PVC

pipe and accessories

(a) 2 wire 1.5 sq. mm

28 (b) 2 wire 2.5 sq. mm 80 Rmt. 77.03

29 (f) 4 wire 2.5 sq. mm 60 Rmt. 119.83

30 Point wiring for Light/ Bell with 2-1.5 15 Nos. 418.55

sq. mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1kV

grade FRLS PVC insulated multistrand

copper wires, in following type of pipe

to be erected concealed in/ on surface

on wall/ ceiling complete with 6A

Modular type switch/ bell push &

accessories and earth continuity of

following type, erected on PVC/

Metallic box, single mounting base

frame covered with textured/ metallic

front plate modules erected on/ in wall/

ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose/

H.D.Connector as directed.

(a) with medium class Rigid PVC

pipe and accessories, Cat. III

31 Point wiring for FAN with 2-1.5 5 Nos. 598.30

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated

multistrand copper wires, in below

type of pipe erected with 6A Modular

type switch and hum free EME four or

more step type electronic fan regulator

with separately mounted and

accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single

mounting base frame covered with

textured/metallic front plate modules

erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC

pipe and accessories, Cat. III

32 Point wiring for Individual Plug with 10 Nos. 444.23

earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1kV grade FRLS

PVC insulated multistrand copper

wires, in following type of to be

erected concealed in/ on surface of

wall/ ceiling complete with Modular

type switch & 5 pin Plug erected on

PVC/ Metallic box covered with

appropriate front plate modules erected

on/ in wall/ ceiling as per pipe erected

with following type of accessories.For

6A Plug with 2-1.5 sq.mm Cu. Wire

with medium class Rigid PVC pipe

and accessories, , Cat. III

33 For 16 A Plug with 2-2.5 sq.mm Cu. 2 Nos. 668.48

Wire with medium class Rigid PVC

pipe and accessories, , Cat. III

34 For 16 A Plug with 2-4 sq.mm Cu. 2 Nos. 788.31

Wire with medium class Rigid PVC

pipe and accessories, , Cat. III

35 Point wiring for looped plug with 6A 5 Nos. 240.52

Modular type switch & 5 pin socket

erected on PVC/ Metallic box, single

mounting base frame covered with

textured/ metallic front plate modules

erected on/ in wall/ ceiling with

following type accessories.

36 Point wiring for looped plug with 16A 5 Nos. 466.10

Modular type switch & 5 pin socket

erected on PVC/ Metallic box, single

mounting base frame covered with

textured/ metallic front plate modules

erected on/ in wall/ ceiling with

following type accessories.

37 Point wiring for secondary light point 4 Nos. 120.69

with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked

1.1kV grade FRLS PVC insulated

multistrand copper wires, in following

type of pipe to be erected concealed in/

flushed on wall/ ceiling, complete with

earth continuity and necessary

connection with primary light with

accessories erected on Metal/ PVC box

covered with 3 mm thick PC

(Polycarbonate)/ Acrylic sheet for

open/ concealed wiring with necessary

Lamp holder/ ceiling rose/

H.D.Connector as directed. Note :-

Maximum up to 6 mtrs length, excess

will be considered as Mains for

Secondary Point.

(A) with medium class Rigid PVC

pipe and accessories

38 Point wiring for Two way controlled 2 Nos. 528.97

Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq. mm (green) both are of

ISI marked 1.1kV grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in/ flushed on wall/ ceiling

complete with 6A Ticino type ISI

marked accessories with earth

continuity erected on Metal/ PVC box

covered with 3 mm thick PC

(Polycarbonate)/ Acrylic sheet with

necessary Lamp holder/ ceiling rose/

H.D.Connector as directed.

(A) with medium class Rigid PVC

pipe and accessories

39 One industrial metal clad switched 2 Nos. 593.22

socket outlet point controlled with

MCB with powder coated enclosure &

related accessories to complete the

(63 A x 3 pin 250 volt)

40 UPVC or better material made switch 2 Nos. 331.51

boards with required switches

Surface Mounted 12 Module Switch

41 UPVC or better material made switch 4 Nos. 330.51

boards with required switches

Surface Mounted 8 Module Switch

42 UPVC or better material made switch 6 Nos. 258.91

boards with required switches

Surface Mounted 4 Module Switch

43 UPVC or better material made switch 8 Nos. 156.78

boards with required switches

Surface Mounted 2 Module Switch

44 Supplying and erecting Approved 5 Nos. 588.88

make of LED Surface mounted

luminaire with rear reflector suitable

for office and laboratory applications.

(a) With 20 watt LED lamp

45 Supplying and erecting R&B approved 5 Nos. 415.25

make of LED Downlighter surface

mounted for Indoor application

(a) With 10 watt LED lamp

46 Providing & erecting Approved make 4 Nos. 2,311.02

Ceiling Fan with double ball bearing

ISI mark with Condenser 230 volt

A.C.50 Hz 1200 mm sweep High

speed complete having 3 blades

aluminium body and blade sets having

ornamental design shanks ,canopy &

30 cms. down rod erected with 24/0.2,

3 core flexible wire with earthing.

47 Supplying & erecting single phase 2 No. 3,937.29

approved make industrial exhaust fan

suitable for medium duty ring mounted

low noise operation suitable for

medium duty having following Dia

size and maximum speed in RPM [E]

450 mm Dia 1400 RPM Cat.II

48 Supplying and erecting approved 2 No. 2,139.83

make Cabin fan of 230V. A.C.

Cy/s. 400 mm. sweep oscillating type

complete erected with lead wires as

49 Supplying and erecting LED well 5 Nos. 1,576.00

glass with die cast aluminium housing

with polycarbonate cover robust

construction industrial type fitting

with IP-66 Protection. (40 watt)

50 Supplying and erecting LED street 4 Nos. 6,565.00

light IP 65. 90 - 120 watt

51 Providing and erecting heavy duty 6 Nos. 8,452.33

flood light Luminaire with High

Pressure die Cast Housing with IP

(b) With 150 watt LED lamp

52 Providing and erecting Sheet Steel 2 Nos. 2,338.41

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutrallink, earth bar and

DI Nrail, Conforms to IS 8623-1 &

IEC 61439 - 1 &3 without MCB to

house appropriate nos. of MCBs. (The

DBs should be used of same company

of MCB to be used) suitable for three

phase incoming and single phase

horizontaltype outgoing Per phase

isolation type (PPI)

sheet steel double door - 4 Way

53 Incomer: 63 A TP MCB (C Curve) 1 Nos. 736.10

54 Outgoing: 16 A TP MCB ( C Curve) 4 Nos. 594.87

55 Providing and erecting Sheet Steel 2 Nos. 1,491.03

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutrallink, earth bar and

DI Nrail, Conforms to IS 8623-1 &

IEC 61439 - 1 &3 without MCB to

house appropriate nos. of MCBs. (The

DBs should be used of same company

of MCB to be used) suitable for single

phase incoming and horizontal single

sheet steel double door - 12 Way

56 Incomer: 32 A TP MCB (C Curve) 1 No. 594.87

57 Outgoing: 10 A SP MCB (C Curve) 12 Nos. 299.58

58 Providing and erecting Sheet Steel 2 Nos. 628.25

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutrallink, earth bar and

DI Nrail, Conforms to IS 8623-1 &

IEC 61439 - 1 &3 without MCB to

house appropriate nos. of MCBs. (The

DBs should be used of same company

of MCB to be used) suitable for single

phase incoming and horizontal single

sheet steel double door - 4 Way

59 Incomer: 63 A TP MCB (C Curve) 1 Nos. 736.10

60 Supplying & erecting approved make 1 Nos. 1,942.97

RCCB + MCB (Electromagnetic type

only working on residual current

device having 10 KA short circuit

breaking capacity and 30m Amp.

Sensitivity & 30 mili sec. tripping

time conforming to IS 12640 testknob

facility trip free mechanism operating

for rated leakage at nominal ten volt,

complete erected including all

materials lugs screws etc. completed.

32A / 40A, 2 pole Single PhaseCat. II

61 Outgoing: 16 A SP MCB ( C Curve) 12 Nos. 299.58

62 Approved make Earth fault Relay 4 Nos. 4,686.23

suitable to mount with inter connection

to moulded case circuit breaker having

CT ratio & MCCB rating as following

along with shunt trip 220V AC. with

all internal connections & complete

erected in M.S.housing.. (1) 15 A -100

A , CT Ratio 1/100 or higher/as per

SMC officer direct

63 Approved make RCCBs conforming to 4 Nos. 1,968.64

IS: 12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 6 KA and suitable for

operation on single phase 240 V.

having characteristic of quick action &

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps. DP

64 Approved make RCCBs conforming to 4 Nos. 2,567.80

IS: 12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 6 KA and suitable for

operation on single phase 240 V.

having characteristic of quick action &

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps. FP

65 Supplying & fixing box for housing 3 Nos. 273.90

ELCB / ELCB + MCB combination

made of 18 SWG sheet steel duly

powder coated with gasket, dust &

vermin proof bakelite shield two

earthing terminals for following type

of RCCB, ELCB, ELCB + MCB [a]

66 Supplying & fixing box for housing 3 Nos. 445.08

ELCB / ELCB + MCB combination

made of 18 SWG sheet steel duly

powder coated with gasket, dust &

vermin proof bakelite shield two

earthing terminals for following type

of RCCB, ELCB, ELCB + MCB [a]

67 Providing and fixing approved make 5 Nos. 6,873.14

Octagonal poles. Made from sheet

steel. The pole should be made as per

IS. and shall be coated with hot dip

galvanizing as per IS 2629/4759. with

required base plate suitable suspend

local wind speed to be erected on

existing foundation.

5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness

68 SETC of cement concrete foundation 4 Nos. 1,694.92

or for concrete filling in 1:3:6 ratio

with 20 to 25 mm stone metal duly

plastered with necessary curing for

pole muffing or any other purpose and

with necessary J Bolts. Size:500x500

69 Spike Type earthing for poles with 1 4 Nos. 635.59

meter long G.I. wire of 3 mm thickness

70 Supply,Installation,Testing and 4 Nos. 795.16

Commissioning of Street Light pole

Single Arm Backet Size : 2 Mtr

71 Supply, Installation, Testing and 4 Nos. 683.03

Commissioning of Street Light pole

Single Arm Backet Size : 1.5 Mtr

72 Supply, Installation, Testing and 2 Nos. 406.86

Commissioning of coil type counter

poise earthing station for external

lighting pole and junction box. (2.5 mtr

long 8 SWG, Cu wire)

73 Providing & laying approved make 50 35 Rmt. 61.63

mm dia Double walled corrugated

polyethylene(conforming to IS

II )with necessary connecting

accessories of same material at

required depth for laying of cable.

below ground / road surface for

enclosing cable and back filling the

same to make ground as per original.

74 Supplying & erecting in earth pit of 2 Nos. 10,592.16

minimum bore dia. 225mm size ASH

or approved make Safe Earthing

Electrode consisting Pipe in- Pipe

Technology as per IS 3043-1987 made

of corrosion free G.I.Pipes having

Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of

40 mm having 200-250 Micron

galvanising, connection terminal dia of

14 mm with constant ohmic value

surrounded by highly conductive

compound with high charge

dissipation suitable for following type

of applications.

(a) For Electrical Installation covering

Transformer Neutrals, Lightning

arrester Earthing, Instrumentation (like

PLC Panel, SCADA)i.e. independent

Earthing located in other than normal

soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of

75 Supplying & erecting funnel type 4 Nos. 2,311.02

earthing having earth plate of

following size burred in specifically

prepared earth pit 3 mtr. below ground

with 40 kg. charcoal and salt with

alternate layers of charcoal & salt,

20mm.dia. G.I. pipe with Funnel with

a wire mesh for watering & bricks

masonry block, C.I. Cover complete as

per para 7.3 of IS 3043 with necessary

length of double Galvanised Iron /

copper earth wire No 6 SWG bolted

with lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest

switch gear with end socket as per

direction & duly tested by earth tester

confirming to IS with following

(A) With 30 x 30 x 0.35 cms: C.I. earth

76 (C) with 60 x 60x 0.315 cms. Copper 4 Nos. 7,874.58

77 Supply & erectionr equired size 50 kg 794.31

Copper strip for earthing of H.T. OCB

/ ACB/ Transformer, LT panel board,

Motors etc. using copper clamp

78 Supply & erection required size HOT 60 kg 77.03

deep Galvanised iron strip for earthing

of H.T. , OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper

79 Supply & erection HOT deep 80 kg 77.03

Galvanised iron strip wire 12 SWG.

80 Supply & laying GI perforated type 40 Rmt 703.97

cable trays with returned edge/ flange,

fabricated from 2.0 mm thk sheet steel

in the standard length of 2.5 mtrs, duly

hot dipped galvanized after fabrication

including accessories such as coupler

plates/ fish plates, bends, tees,

reducers, elbows, covers and electro-

galvanized hardware etc, erected on

existing support as per specification

and instruction of engineer in charge.

(d) 450(W) x 35(H) x 2.0 mm Thick

81 (c) 300(W) x 35(H) x 2.0 mm Thick 40 Rmt 501.97

82 (b) 150(W) x 35(H) x 2.0 mm Thick 40 Rmt 298.96

83 (a) 100(W) x 35(H) x 2.0 mm Thick 40 Rmt 230.28

84 Supply of necessary materials and 200 kg 98.98

M.S. fabrication work (For ISMB,

Square bar, flats, Chequered plates,

For C channels, angles etc for ladder

grills etc.) with oil paint as per details

85 4.5 Kg. Co2 type Portable fire 4 Nos. 6,590.68

extinguisher with necessary clamps,

supports and trolley.

86 Providing pair of rubber hand gloves 4 Nos. 213.98

suitable for working on 11kV/ 22kV

87 Supplying rubber matting of 6 mm 4 Sq. 983.58

thickness as per IS 5424 and of Mtr

required length and breadth with good

insulation property.

88 Supplying rubber matting of 12 mm 4 Sq. 3,081.36

thickness as per IS 5424 and of Mtr

required length and breadth with good

insulation property.

89 Warning signs (11 KV & 415 V) 2 Nos. 448.64

90 Supplying stand first AID box with 2 No 299.58

antiseptic cream, medicine for use on

wounds due burn, crepe bandage,

gauge bandage, medicated ready to use

bandage (Band-aid) adhesive tape for

medicinal user, Scissors, anti-septic

solution (savlon or similar) etc. (All

above contents shall be of standard

91 Providing printed instruction chart 2 Sets 128.39

both in English and Gujarati and duly

framed with front glasses for treatment

of person suffering from Electric

92 Supplying and erecting floor mounting 6 Nos. 1,155.51

stand for keeping four nos. of FIRE

buckets comprising 1500 mm in

length, 900 mm height frame made out

of 30mm X 30 mm X 4 mm angle iron

with cross supports for legs, welded

with 4 hooks and duly painted with one

coat of red lead and two coats of

approved enamelled silver paint.

93 SETC of 10 W LED lamp operated 2 Nos. 1,251.40

self contained emergency light with

dry type maintenance free battery.

94 LIASONING CHARGES 1 job 20,690.85

Liasoning fees for preparing necessary

documents and drawings for getting

N.O.C from supply co and Electrical

Inspector for charging the installation.(

All statutory fees will be paid by SMC

95 LIASONING CHARGES 1 job 20,690.85

Liasoning fees for preparing necessary

documents and drawings for getting

N.O.C from factory Inspector for

factory licence of premises. (All

statutory fees will be paid by SMC ).

96 Cup Board 1 Nos. 7,252.21

97 Table 1 Nos. 4,665.85

98 Heavy Duty Office Chair 2 Nos. 3,113.76

99 Safety Helmet 3 Nos. 129.45

100 Safety Belt 3 Nos. 796.59

101 Safety Shoes Pair 3 Nos. 269.18

102 AUTOMATION 1 Lot 1,92,942.44

PLC Based Auto-Operation system of

Pump sets along with 1 KVA UPS and

battery back upas directed by Engineer

in Charge at sewage Pumping Station

along with 1 KVA UPS and battery

103 Supply of Desktop PC with UPS and 1 No. 77,600.96

other accessories as per detailed

technical specifications

104 Supply, Installation, Testing and 1 No. 3,630.90

Commissioning of Voltage Stabilizer

and other accessories as per Tender

105 Development of graphics of SPS & 1 Job 26,897.83

connecting automation system of SPS

106 CCTV CAMERA SYSTEM 1 Job. 67,196.63

Supply, Installation, Testing and

Commissioning of 7 Nos. CCTV

camera System for Sewage Pumping

107 Supply of SCADA runtime software 1 No. 98,540.44

with lifetime license (for 15 displays)

108 Supply, Installation of Biometric 1 No. 15,296.61

Attendance System as per detailed

Tender Specifications.

109 INFORMATION BOARD AT 2 Lot 3,672.68

PUMPING STATION

Supply of Pumping Station

information board with printed eco

vinyl sheet with wooden frame, size

TOTAL AMOUNT OF CAPITAL WORK

TOTAL AMOUNT OF CAPITAL WORK

SCHEDULE-B2 OPERATION & MAINTENANCE WORK

DESCRIPTION QTY UNIT RATE TOTAL RATE

All in all Operation & Maintenance Cost

(Manpower, Fixed Cost, Machineries

Maintenance & Variable Cost) for

Normal Operational Period for Three

Shift of PALI SPS as per detailed

specification mentioned in tender

Painting work as instructed by Engineer

2 in Charge for PALI SPS as per detail 1 Job 1,00,000.00

specifications & scope of work.

TOTAL RATE OF OPERATION & MAINTENANCE WORK

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation