Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25,751.10Accepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹82,841+₹57,089.90 (221.7%)Accepted-Finance | L2 | Accepted-Finance L2 |
Tender Value
₹1.7 L
EMD Value
₹2,000
Closing Date
29 Aug 2022, 12:00 pmClosed
SE, EDC, Rampur
Office of the Superintending Engineer, EDC, Rampur
33/2022-23(EDCR) Releasing of new connection 11 HP, 13 HP and 10 HP in F/O Executive officer, Nagar Palika Parishad Bilaspur and Gram Pradahan Pipaliya Mishra and increasing of load capacity c/o M/S Shara Hospital Jamnanagar, Bilaspur under jurisdi
2022_PVVNL_720427_1
33/2022-23(EDCR)
Open Tender
Electrical Works
Lump-sum
45 days
Office of the Superintending Engineer, EDC
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,180
SE, EDC, Rampur
₹2,000
19 Nov 2022
9 Aug 2022
29 Aug 2022
9 Aug 2022
29 Aug 2022
9 Aug 2022
Amount
Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.
8.5 Mtr long PCC pole
11 Mtr Long ST pole
LT ABC Cable (3x95+1x70+1x16) sqmm
ACSR Weasel Conductor
other line material such as X-arm, etc.
11/0.4 Kv 63KVA Transformer
11/0.4 Kv 25KVA Transformer
a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.
8.5 Mtr long PCC pole
11 Mtr long ST pole
b) Double pole structure Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size.
8.5 Mtr long PCC pole
11 Mtr long PCC pole
Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support
8.5 Mtr long PCC pole
11 Mtr long ST pole
b) Double pole structure
8.5 Mtr long PCC pole
11 Mtr long PCC pole
Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.
Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.
Fixing, tightening of 33/11 KV Pin Insulator with Pin on pole as required.
Fixing, tightening of 33/11 KV Disc Insulator with Pin on pole as required.
Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs
Laying, sagging, stringing and binding with jumpering etc of ACSR Weasel Conductor with Jumpering as per RESPO Norms and as per direction of Supervising Engineer.
Laying, sagging, stringing and binding LT Cable as per RESPO Norms and as per direction of Supervising Engineer.
Gaurding of road crossing Span with GI wire 6/8 SWG
Providing & Fixing of Danger board with clamp
Installation of 11/0.4 KV 63 KVA Transformer including earthing and making connection etc.
Installation of 11/0.4 KV 25 KVA Transformer including earthing and making connection etc.
Installation of 3 Phase distribution box making connection etc.
Providing and fixing Dead end clamp with I hook
Providing and fixing Suspension clamp with I hook
Providing and fixing Clamp for Gaurding Angle
Providing and fixing F Clamp
Providing and fixing of clamp for X-Arms of Channel with Bolts & Nut
M/s I K ELECTRICAL
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .