Renovation Work at Bank Building of Mata Sundri College for Women New Delhi

DISMANTLING & DEMOLISHING

Demolishing brick work manually/ by mechanical means including disposal of malba from site

Dismantling all existing GI/ CI pipe and fittingsetc complete

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unservicable material within 50mtr lead as per directionby engineer-in -charge

PROPOSED BRICK WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry

PLASTER

12mm cement plaster of mix

1:4 (1 cement : 4 sand)

15 mm cement plaster on the rough side of single or half brick wall of mix:

1:4 (1 cement : 4 fine sand)

TILES

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete

size of Tile 600x600mm (basic rate of tile rs. 80/-sq.ft.inclusive of GST)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (rate of tile rs. 60/- sq.ft.with tax)

CONCRETE

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:

1:1:2 (1 cement: 1 coarse sand (zone-III) derived from natural sources: a) 2 grade stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with

1:1:2 (1 cement 1 coarse sand: 2 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position ready mix or site batched design mix cement concrete for Plain cement concrete work; using coarse aggregate and fineaggregate derived from natural sources. Portland pozzolana/ordinary porland/ portland slag cement, admixtures in recommended proportions as per IS:9103 to accelerate / retard setting of concrete to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing carriage of all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete

concrete of M25 grade with minimum cement content of 300kg/cum

SHUTTERING

Centring and shuttering including strutting propping etc. and removal of from for.

a) Shelves (Cast in situ)

b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

c)Lintels,beams and Plinth beams, girders, bressures and cantilevers

d) Suspended floors,roofs, landings balconies and access platforms

STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including,straightening, cutting, bending, placing in position and binding all complete above plinth level.

TMT bars of grade FE-500D or more

DOORS & FRAMES

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Profile B

Fixing with adjustable lugs with split end tail to each jamb

Removing and fixing of existing strong room door from basement level to ground floor level with new hardware fittings

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws or welded to frames

ISI marked stainless stell tower Bolt 10"

stainless steel (ss 304 grade) fancy handle

Hydraulic door closer bottle type ms body with necessary accessories and screw complete

L- drop

PAINTING

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:

New work (two or more coats) over and including water thinnable priming coat with cement primer

SANITARY

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

W.C. pan with ISI marked white solid plastic seat and lid (make such as Jaquar/grohe/kohler)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (make such as Jaquar/grohe/kohler)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass, screws and washers complete.

Providing and fixing white vitreous china fiat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

One urinal basin with 5 litre litre white P.V.C. automatic flushing cistern (make such as jaquar/grohe/kohler)

Providing and fixing stainless steel a Isi 304 (18/8) kitchen sink as per IS:13983 with CI Brackets and stainless steel plug 40mm, including painting of fitting and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm

providing and fixing toilet paper holder

bottle trap

health Faucet (jaqaur)

cp brass angle valve 15mm

s.w gully trap P type 100x100mm

PTMT soap dish/holder 138x102x75mm

supply and laying of epvc unthreathed pipes (as per ASTM D- 1785 sch 40) of approved makes for water supply at site of equivalent standard size for water ssupply joined using solvent cement with fittings suitable for the working pressure. Supporting exposed pipes using necessary G.I clamps and supports. Concealed pipes including cutting and making good walls,floors etc where ever required. 20mm Nomianl dia (10kg)

waste piping 110 mm od 6kg/sqcm

soil piping 110mm OD 6kg/sqcm

EARTH WORK

Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with tonne roller or wooden or steel rammers, and rolling every 3rd and top- most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks. marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m

All kinds of Soil

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

ELECTRICAL INTERNAL WIRING

Light Points: Supply and Installing 20mm ISI grade rigid PVC conduit open on Steel structure ceiling with all accessories(Conduit drops in walls to be concealed) and carrying out wiring using 1.5 sq mm PVC insulated FRLS single core copper conductor wires, for phase& neutral along with 1 sq.mm PVC insulated FRLS single core copper conductor wire for earth, 5A modular type switches, MS box front plate, testing and commissioning.(Maximum distance to every secondary point is 5meter.)

One light point controlled by one No. 6A SP switch.

One exhaust fan point controlled by one No. 6A SP switch.

Two light points controlled by one No. 6A SP switch.

Supply and Installation of 3pin 16/6A modular socket outlet concealed in wall controlled by one No. 16A SP modular switch at combined position including MS module box , Front plate, Cover plate and switch, Testing and commissioning.

Supplying & fixing of 305 mm 900 RPM noiseless/silent exhaust fan complete with louver and bird guard flexible wire as required.

Supplying & fixing of following light fitting complete with holder lamp earth point including connections

a) 2 x 18 w with LED bracket upto

b) 2x18 W LED

c) 1x 18 W LED

Supplying & fixing following mirror optics LED light fixture complete with earthing point and 20 w LED complete as required

a) 1x 20 w LED

M/S KUBER BUILD TECH

CIS GLOBAL INFRATECH PVT LTD