Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC PLOT NO P PARASNAGAR NR SBI BANK NARSANG TEKRI PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹37.5 L+₹3.2 L (9.29%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹40.5 L+₹6.1 L (17.8%)Rejected-Finance BYPASS ROAD BESIDE YUG BAJAJ SHOWROOM GARIBICHOK PORBANDAR 360577 | PORBANDAR | GUJARAT | 360577 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹40.5 L+₹6.1 L (17.9%)Rejected-Finance HQ CE SC PUNE | PUNE | MAHARASHTRA | 410301 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹40.5 L+₹6.2 L (18.0%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹33.5 L
EMD Value
₹67,000
Closing Date
28 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL UTKARSH SHARMA
OPP BIRLA FACTROY GE (I) CG PORBANDAR
ADDITION/ALTERNATION TO BUILDING No. P-125 AT CGDHQ-1 UNDER GE I CG PORBANDAR
2023_MES_627216_1
8926/E8
Open Tender
Civil Works
Item Rate
180 days
PORBANDAR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE I CG PORBANDAR
₹67,000
Yes
19 Dec 2023
7 Nov 2023
30 Nov 2023
7 Nov 2023
28 Nov 2023
22 Nov 2023
Amount
SCHEDULE 'A' B/R ITEMS
Dismentaling/ Demolition of brick work or stone masonary or RCC Pre cast Jali & Jafari builtin cement mortar including all quoins, arches, pillars, etc., complete all as specified and directed by Engineer-in-Charge.
Excavation over area not exceeding 1.50 Metre deep and getting out in hard/dense soil, complete all as specified and directed by Engineer-in-Charge.
Excavating in trenches not exceeding 1.5 Metre wide & not exceeding 1.5 Metre depth and getting out Hard /dense soil, complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in Hard/Dense rock, complete all as specified and directed by Engineer-in-Charge.
Removing excavated soil exceeding 500 Metre and not exceeding 1.50 Kilometre depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation and mass concrete, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for 75mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base of floors, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Porbandar stone masonary, well bonded, bedded and solidly hearted builtin Cement Mortar 1:6, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for rendering 15mm thick on fair face of brick work or concrete surfaces in Cement Mortar 1:4 finished even and smooth wiithout using extra cement, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for 15mm thick rendering in Cement Mortar 1:6 to brick/concrete wall surfaces trowelled to even & smooth w/o using extra cement, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for cement concrete (1:2:4), type B-1, using 20mm graded mechanically crushed stone aggregate as in coping, bed block benching, kerbs, mud stop, rounded or chamferred on edges including necessary form work/moulds, complete all as specified and directed by Engineer-in-Charge.
Material & Labour RCC 1:2:4 Type-B1 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for formwork of soffits of suspended slabs such as roof slab, floor slabs, landigs, shelves and similar work, not exceeding 200mm thick rough finished surfaces of concrete, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Mild CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.
-ditto- all as per item No. 16 above, but 6mm to 8mm dia, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for preparing surfaces plastered or unplastered new surface of walls applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-Charge. Note:- after painting, cleaning of all floors, glass, Supply & Fixing furniture by own arrangement
Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-Charge. Note:- after painting, cleaning of all floors, glass, Supply & Fixing furniture by own arrangement
Material & Labour for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in Cement Mortar (1:4), complete all as specified and directed by Engineer-in-Charge.
Material & Labour for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick rendering in Cement Mortar (1:3), complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Vitrified ceramic tiles (light shade) 10mm thick (square /rectangular) polished, area of each tiles exceeding 0.42 sqm. but not exceeding 1.0 sqm as in floor surfaces etc., set and jointed in neat cement slurry ad pointed in white or coloured cement to the match, including 15mm thick screed bed in cement mortar 1:3 over, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for glazed coloured ceramic tiles in verticle surfaces 250 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or bedding layer 10mm thick with cement mortar 1:4 and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Anodised aluminium snap grid framed (size 605mm x 605mm) work for false ceiling and including hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40mm x 3mm size, 60mm long and expansion holdfastener 12.5mm dia 40mm long, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing False ceiling with gypsum board, perforated type, and acoustic purpose, factory made matt finish surface, 600mm x 600mm in size and 12mm thick, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Rolled sections of Fe 410-W(Gde E- 250) quality-A as in main and cross beams,column, hip and jack rafters; purlins .where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including welding etc., Fe-410-W(gde-E-250) quality B, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long diameter of neck exc 12 mm but not exc 20mm, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of approved colour and design having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of approved colour and design having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for preparation of new steel & iron surfaces & applying two coats of synthetic enamel paint over 10cm width or girth etc., complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in plinth protection, 75 mm thick, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing for 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 35mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. as specified in SSR Part I, Section 8, clause 8.20 (a), complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 40mm thick Flush Shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/ frame to match commercial type on both side, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 25mm thick flush shutters, solid core construction, with block board core and both faces covered with decorative face veeners with lipping / frame to match, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for 1.5mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on 18mm thick calibrated plywood of , grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing for Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaske etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and complete all as specified and directed by Engineer-in-Charge.
Material & Labour for 30mm thick factory made 100% solid WPC (Wood polymer composite) Solid Plain/Prelam/Enrouted Plain/Enrouted Painted flush Door Shutter of required size comprising of Virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium carbonate and natural fibers (Wood Powders/rice husk/Wheat husk) and Non toxic additives made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650 Kg/cbm manufacture by an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw withdrawl strength of 2000 N (face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread flame of Class A category with Property of being Termite/Borer Free, Water/Moisture Proof, Fire Retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws for WC / Bathroom / Toilet / Kitchen / Balcony Doors, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for factory made 100% Solid WPC (Wood Polymer Composite)- Door frame of size 75mmx50mm made from wood Polymer Composite (Single Extruded process ) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium carbonate and Natural Fibers (Wood Powder/Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & Screwed with full body threaded star headed screws having minimum frame density of 780 Kg /cbm manufacture by an ISO 9001-2015 certified Company, having good screw holding capacity (Screw withdrawal strength of (Min 990N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Draft Fasteners/Hold Fast of required dia and length for WC/Bathroom/Toilet and external uses, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding interlock (one vertical length in each shutter)(45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm) 2nos, sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate excludes cost of glass and includes all oyher connected accessories) area not exceeding 2.00 Sqm each fixed from ground floor to height of 2nd floors, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing for 7mm thick aluminium grills of make "Decogrill" model DG 104 surrounded by aluminum 'C' channel and size of opening 75mm x 75mm, fixed from ground floor to height of 2nd floors, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer and applying two coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 150mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 150mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 100mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 5mm thick Figured glass, pin headed type and glazing with oil putty in squares exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 3mm thick plain glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 3mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing staineless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium/pvc sections, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including, grinding, polishing, moulding the edges and polishing and including over screed bed 15 mm thick in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for granite (of any type) 20 mm thick (table rubbed and polished) in skirting and dado forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including, grinding, polishing, moulding the edges and polishing and including over screed bed/rendering 15mm thick in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing PVC(SWR) Floor trap 75mm bore with grating including jointing using solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing PVC (SWR) bends 110 mm bore without access door any radius, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing PVC (SWR) bends 75mm bore with/without access door any radius, complete all as specified and directed by Engineer-in-Charge.
Supplying and laying of 16 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors, complete all as specified and directed by Engineer-in-Charge.
Supplying and laying of 20 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Brass Elbow for special fitting of 16 mm bore CPVC pipe, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Brass Tee for special fitting of 16 mm bore CPVC pipe, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Male Brass threaded Adaptor Tee for special fitting of 16 mm bore CPVC pipe, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 15mm bore Bib taps, with flange chromium plated cast copper alloy with capstan head, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing for brass CP shower rose 125mm size fancy type with swivel joint any size including fixing to steel pipe/union for 15mm dia, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing PVC connection of 15mm dia length 600mm, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, connection to trap, flushing pipe & anti -syphonage pipe etc., including necessary materials for fittings & making good to floor, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 10 Ltrs. Capacity PVC flusing cistern low level with all accessories, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing in repair EWC one piece with integrated cistern with soft closing seat cover and twin flush fittings size 690mm x 375mm x 785mm, white in colour, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing in repair Vitreous china wash basin, white, flat back, size 560mm x 410mm x 180mm including waste pipe, brackets including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Toilet Roll Holder with flap, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Vitreous China ware wash hand basin white, flat back, size 550mm x 400mm size with cutting for and pinning ends of brackets or erecting stand including 32mm PVC bottle trap, chromium plated 15mm pillar cock, PVC connection 450 mm long, CP waste coupling, 32mm dia PVC pipe, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 20mm SS chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 15mm dia CP two way tap fixed in pipe, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 15mm dia CP Health Faucet with 1mtr long lead fixed in pipe, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 15mm bore stop valves, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 15mm dia Stop valves / gate valve, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 20mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Stop valves of size 15mm dia fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing harrison rails (Curtain rod/drapery rod), 20mm dia, powder coated with and including fency type PVC bracket 2 Nos of each opening and side stopper fency type powder coated of required shape and size 2 Nos of each opening, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing, Solid PVC Wall Lining consisting of 5mm thick Plain /preleam colour PVC sheet inclusive of solvent cement and fixing at site on wall as per specifications and drawing, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Galvanised Angle, Galvanised Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats and wind tie etc. GDE Fe 410-W ( Truss top portion is Round Shape), complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Galvanised tube medium grade of tube including fittings, screwing, cutting, welding, soldering, drilling as required in any position and description in including special shaped washer etc. complete using ERW (electric run welded) or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete fabrication, erection and all as specified and directed factory moulded and fixed at height upto 10 m etc., complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing 3 mm thick Aluminium composite panel cladding plain of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25mm x 25mm not exceeding 900 mm c/c on MS pipe purlin/rafter/column beam/slab to hold ACP cladding etc., complete all as specified and directed by Engineer-in-Charge. Note:- Colour/ Pattern of ACP sheet shall be as approved by GE
SCHEDULE 'A' E/M ITEMS
Taking down carefully copper /aluminium point wiring (light, fan ,socket or power point ) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disribution surfaces of walls, floors, etc., complete all as specified and directed by Engineer-in-Charge.
Disconnecting of unserviceable sub main wiring of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces, complete all as specified and directed by Engineer-in-Charge.
Disconnecting electric connections and taking down old unserviceable MCB DBs of any capacity including MCBs, complete all as specified and directed by Engineer-in-Charge.
Taking down Ceiling fan & blades and deposit to E/M store, complete all as specified and directed by Engineer-in-Charge.
Hanging only ceiling fan and connecting up cable from ceiling rose or connector to fan, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- 1 ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required modules for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc for the following:-
One light/fan point controlled by one, one way switch
One 3 pin 6 Amps socket outlet on same board
One 3 pin 6 Amps socket outlet on independent board .
Material & Labour for Point wiring complete with 2.5 Sqmm single core PVC insulated but unsheathed multistrand copper conductor FRLS cabeI 650/1100 Volts grade conforming to IS-694 drawn through PVC conduit (minimum 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm heavy duty including conduit accessories concealed pressed steel terminal boxes of size cover white/coloured including 2.5 Sqmm PVC insulated but unsheathed copper conductor FRLS cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board, including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets with required modules, complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement modular switch 1 way, 6 Amps, 1 module (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make : Legrand / Anchor (Roma)/ L&T
Supply & fixing in replacement modular switch 1 way, 16 Amps, 1 module (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make : Legrand / Anchor (Roma)/ L&T
Supply & fixing in replacement modular socket, 6 Amps, 2/3 pin combind 2 module (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make : Legrand / Anchor (Roma)/ L&T
Supply & fixing in replacement modular socket, 6/16 Amps, 2/3 pin combind 2 module (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make : Legrand / Anchor (Roma)/ L&T
Supply & fixing in replacement modular fan regulator, 120 watt, 2 moduler (ISI marked), complete all as specified and directed by Engineer-in-Charge. Make : Legrand / Anchor (Roma)/ L&T
Supply & fixing in replacement ceiling rose, surface bakelite, 65 x 17 mm three terminals (ISI Marked), complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement wall mounted LED Tube light fitting 1 x 10W LED (6500K), 2 feet, Sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work, including making connections with 2 core flexible copper wire 0.50 Sqmm from ceiling rose after fixing fitting, complete all as specified and directed by Engineer-in-Charge. Make:- Philips / Wipro / GE
Supply and fixing LED 18 Watt surface mounted slim round/Square downlighter in powder coated die cat aluminium housing with clear diffuser source including necessary connections, complete all as specified and directed by Engineer-in-Charge. Make:- Wipro / Bajaj / Philips / CG
Supply & Fixing BEE five star rated BLDC energy efficient high-speed Metalic body ceiling fan having 1200 mm blade sweep, air-flow not less than 215 CMM, 28W,operating voltage 140-285V and frequency 50 Hz, including a down rod of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan with smart remot control, complete all as specified and directed by Engineer-in-Charge. Make: Orient / Crompton / Usha
Taking down of oudoor/indoor unit of split type AC of capacity 1.5 ton by duly dismantling copper coil, electrical connections mounting etc. and re-installing the same in new position with replacement MS bracket, and toping up of refrigerant gas and other items as per site requirement complete all as specified and directed by Engineer-in-Charge. Note : (a) The cost of suction and discharge tubing including insulation, brazing and rubberized insulation is included in the unit rate. (b) The cost of fixing arrangement with GI stand with nuts, bolts etc is deemed to be included in the quoted rate.
Supply & Fixing in replacement sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 4 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC conduit, including taking down of existing unserviceable sub main wiring, complete all as specified and directed by Engineer-in-Charge. Note : 1. Two runs of cable, one run of earth wire, one run of PVC conduit will be measured and paid one unit.
Supply & Fixing in replacement sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC conduit, including taking down of existing unserviceable sub main wiring, complete all as specified and directed by Engineer-in-Charge. . Note : 1. Two runs of cable, one run of earth wire, one run of PVC conduit will be measured and paid one unit.
Supply & fixing in replacement MCB DB 12 way SPN, (Acrylic door), IP 43 “Weather proof” Concealed/ Surface mounted and making good the disturbed surfaces of walls/ceiling/floor etc. complete with all accessories, main switch and connecting the cables with proper, complete all as specified and directed by Engineer-in-Charge. Make: Legrand / L&T / Schneider
Supply and fixing in replacement of MCB SPN, 240 volt, 32/40Amps, complete all as specified and directed by Engineer-in-Charge. Make : Legrand /L&T/ Schneider
Supply & fixing in replacement of MCB SP, 240 volt, 6 to 32 Amps, complete all as specified and directed by Engineer-in-Charge. Make : Legrand /L&T/Schneider
Supply & Fixing Modular Motor starter 16A capacity, 02 Module with metal flush box, cover plate of required module for ACs, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for in replacement of Earthing complete with GI earth plate 60cm x 60cm x 6mm thick electrode and 4mm dia GI wire as earthing lead.burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 and including earth work, PCC pit and RCC cover, watering pipe 20mm dia light grade, funnel, wire mesh, protection pipe 15mm dia light grade up to 7.5 mtr length of earth wire, charcoal dust and salt etc., and connected to earthing test point, complete all as specified and directed by Engineer-in-Charge.
SANVI ASSOCIATES
M/S Unicon Engineering co
K B N TRADERS
RUDRAAY CONSTRUCTION
Bharat Enterprise
Vijay Construction Co
roxy enterprise
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .