Karur Corporation_MLA Fund 2024-25 Krishnarayapuram

Amount

Earth work excavation in all classes of Soils such as Hard Stiff Clay, Stiff Black Cotton, Hard red Earth, Shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, Spreading, leveling, sectioning breaking clods etc., in all incidental charges etc., complete as per std specification.

Supply delivery and filling of River sand in Layer of not more than 15cm thick including watering with all layers and consolidation complying including cost and conveyance of sand at site and all labour charges and all other incidential charges etc., complete as per Std Specification

Filling in basement with excavated earth in layers of not more than 15cm thick well rammed, watered end complying with std specification

Cement Concrete of mix 1:4:8 (One Cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including form work and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges etc., complete as per standard specification.

Brick work in cement mortor 1:5mix using country bricks including cost and conveyance of all materials from approved quarry and including labour charges and other incidential charges etc, complete as per std specification..

Supplying and Erecting Steel Centering for sides and soffits including supports and strutting upto 3.29m height in all floors with all cross brasings using mild steel sheets of size 90cmx60cm and 10gauge stiffened with welded MS angles of size 25mmx25mmx3mm for boarding laid over silver oak (CW) joists of size 10cmx6.5cm spaced at about 90cm c/c and supported by causrina props of 10cm to13cm dia spaced at 75cm c/c etc, complete complying with std specification

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per Std Specification

Plain cement concrete 1:2:4 (one cement two sand and four metal) mix using 20mm Machine chips for PCC works including side centering and labour charges for concrete mixing, watering, curing and finishing of CC road works etc., complete as per std. specification

Plastering Rcc exposed work such as columns beams& celiing and other concerete surfaces with 10mm thick plaster with cement mortar 1:3 (one cement and three sand)mix at all height and depths above or below plinth level,compling with standard specifiction.

Plastering with cement mortar 1:5 mix 12mm thick inculding all cost and conveyance of all labour and material charges etc .,complete as per std. Specification

Supply and erection of steel door with 45x45x6mm angle outer frame with two leaf shutter using 40x40x6mm angle and 20gauge GI sheet and required size of steel window including cost and conveyance of materials at site and labour charges for cutting, bending, lock arrangements etc., complete as per std specification.

a) Steel Door

b) Steel Window

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats for new Iron work including one coat of priming coat and using the best quality Iron primer and best quality synthetic enamel paint etc complete complying with standard specification

Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) SD.22

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. SD.36

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(S.D.88).

SPE CONSTRUCTION (BID ID -1440540)