PROVN OF TECH BLDG ALONGWITH SERVICES UNDER GE KARGIL

NOTE: Schedule ‘A’ Part - I to Part -V are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Total amount of Sch 'A' Part - I (BUILDING Works)

Total amount of Sch ‘A’ Part - II (SEWAGE DISPOSAL)

Total amount of Sch 'A' Part - III (EXTERNAL ELECTRIC SUPPLY WORKS)

Total amount of Sch ‘A’ Part - IV (INTERNAL ELECTRIC SUPPLY)

Total amount of Sch ‘A’ Part - V (INTERNAL WATER SUPPLY)

SCH 'A PART - VI (Miscellaneous B/R and E/M works for Sch 'A' Part-II to Part-V) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 5 signifies this fact only

Supplying, erecting, testing and commisiioning Raising and Lowering type (16 metre height high mast system hot dip galvanised inside and outside) in single dip, suitable for wind velocity as per IS 875 part 3 with only one longitudinal seam weld per section but without circumferential weld including accessories viz head frame, 2 point suspension system with steel wire rope 6 mm dia 7/19 guage, double drum winch, galvansied lantern carriage arrangement suitable for and with 8 nos Luminaires symetrically lighting finial, LED aviation obstruction light of 9/10 watt, lighting arrestor spikes, foundation bolts, nuts, anchor plates, templates, trailing cable and intergral power tool for raising and lowering operation of high mast with and including following technical specification.

(a) HIGH MAST SYSTEM Height of Mast - 16m No of sections - two Material construction - S355 grade as per BS-EN10025 Base dia and top diameter (A/F) - 360 mm and 150 mm respectively Plate thickness and section length - Top - 3mm X 5420mm, Bottom - 3mm X 10980mm Cross section of Mast - 20 side polygon Standard for galvanisation - As per BS EN ISO 146/BS729/IS2629 Size of Opening and door at base - 1200 mm X 250 mm (b) LUMINAIRES CARRIAGE Material of construction - 50 NB ERW Class 'B' MS pipe Diameter of carriage ring (mn) - 535 mm (ID) Construction - 8 mm welded 2 Sections Load carrying capacity 16 Luminarie (c) WINCH / POWER TOOL Type/SWL of winch - Double Drum /SWL 350 Kg Method of operation - Integral Motor I Motor capacity - 1 HP Three Phase

(d) STAINLESSS STEEL WIRE ROPE Grade/Construction - AISI304.7/19 Construction No of Ropes - Two contunious Diameter (mm) - 5 mm Braking load capacity (minium) - 1450 Kg x2 (e) FEEDER PILLAR Powder coated CRCA steel feader piller housing 3.15 mm thick (minimum) suitable for outdoor application with 63 amp four pole MCB incomer, Nature switch, 16 amp, 420 volts suitable for automatic switching ON and OFF of the luminaries, 9 Amp two contactors and raise lower push buttons for motor operation, incoming terminals of 50 Sqmm and outgoing terminals of 16 Sqmm for power cable and 2.5 Sqmm for motor mounted on suitable foundation (f) FOUNDATION Construction of suitable shallow foundation with RCC 1:1:5:3 of 20mm graded aggregate mix concrets for high mast pole of footing size 3x3M and footing depth 2 M. (g) TRAILING CABLE PVC insulated PVC scheathed 1100 volt grade ISI marked multistranded copper conductor cable 6 core 2.5 sqmm. (h) FLOOD LIGHT LUMINAIRE Eight number LED flood light luminaires having a nominal system lumen output of minium 15000 lumens at a minimum system efficacy of 100 lumens per watt and total power consumption not more than 150 watt including driver, it has a rated system life time of 50000 buring hours at L70 and should have a color temperature of 6500 K, CRI>80, THD>10% and PF>0.95 complete & surge protection not less than 10KV

(j) Automatic light control switch with infared sensor based Nature Switch & voltage monitoring system (VMS). Nature switch operation should be based on Natural Light Lux level. Required illuminance level for Switching ON is <30 Lux and for Switching OFF> 10 Lux. The Sensor should also have pert night operation facility of min 4 hrs to max 12 hrs. VMS should have Adjustable Over & under Voltage Trip level and Protection against Phase Loss, Neutral Loss & Phase Reverse. The sensor & VMS along with suitable Power Contractor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Terminate proof and FR grade SMC Junction box conforming to IP54. The circuit should also have provision for Manual Operation (i.e. sensor & VMS By-pass option) with 3nos. Contractors, 3 nos Incoming MCBs &3 nos. Outgoing MCBs of 16-20 Amps each & Circuit wiring (Copper) of min. 10 Sq.mm

Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66/65 protection, with impact and corrosion resistant complete with driver and lamp including fixing arrangement on steel tubular pole complete all as directed.

S & F PVC insulated unarmoured ,PVC sheathed cable of size 1.5 Sqmm 3 core cut to pieces all as Specified and directed by Engr-in-charge.

S&F fix junction SMC box with MCB 10A, 10 KA with connector fixed on pole for controlling street /security lights

Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof, free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requied at site and of fabricated by 3.15 mm thick SS sheet over MS 50 X 50 X 6 mm thick angle iron frame of required type for support with double door both sides open type with necessary locking arrangement with sloped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incoming / outgoing feeders of suitable sizes all as specified and directed by Engr-in- Charge (Panel-E) :-

S&F wall mounted LED light fittings 18 watt, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed.

S&F wall mounted LED light fittings 10 watt, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically complete all as specified and directed.

S&F of High power LED security light 25 Watt wall mounted IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core copper cable PVC insulated from ceiling rose to fitting complete all as specified and directed.

S & F VTPN distribution board 4 way iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s, complete with appropriate size copper bus bar and neutral link of make Legrand cat part No 507750 or equivalent to Simens/Schenider complete with following accessories and making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed:- (a) MCCB 3 pole 415 Volts 63 Amps, 25 KA of the same make as incomer - 01 No. (b) MCB DP 32 Amps, 240 Volts of the same make as outgoing - 04 Nos (c) MCB SP 6 to 32 Amps, 240 Volts of the same make as outgoing - 04 Nos.

Please Enable Macros to View BoQ information