Shifting of 220kV D/C Viramgam-Tata Nano Line 1 & 2 with ACSR Zebra conductor from Location No. 60 to 69 passing through the plot of Khoraj GIDC for proposed industrial plant by M/s Maruti Suzuki India Ltd. under deposit scheme (Option- 1).

Sr. No. Description of Works - SAC Code 9954 Amount in Rs.

PART -A Supply of Materials

Erection of Transmission Line

Erection of Monopole

TOTAL F.O.R. COST WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL END COST WITH GST

I am / we are willing to carry out this service package of works contract stated above at GST 18% (in figure) ______

% (in words _____ %) below / above the estimated TOTAL END COST for all the items stated there in.

The amount of tender works out with above % (in figure) for TOTAL END COST Rs. _____________ (in words Rs.

I / we confirm that our above quoted rates are ON firm price basis; except (i) Supply of Tower Materials

(Including Bolts-Nuts), (ii) Polygonal poles, (iii) ACSR Zebra Conductor and (iv) Hardware & Accessories of

ACSR Zebra conductor for which Price variation will be applicable.

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better

economical management and for the ease of Accountancy but the entire Contract, is to be assessed under GST Law,

as the Works Contract Service, which is, as per the provisions of Section 2(30), read with, Section 2(119), further

read with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or SGST Act, 2017 and similar provisions,

applicable under the UTGST Act, 2017and the IGST Act, 2017 and the entire activity, would be subjected to levy of

Tax, at the rate of 9% CGST + 9% SGST or 18% IGST, under the GST Law. However, Classification Codes for

different segments or portions of the Works Contract, may be specified separately, in the Supplies, with a final

common Classification Code of Works Contract Service.

2) The Bidder is hereby conveyed that only SAC Code and Tax rate for supply of Service Works Contract i.e. 18% is

relavant for the purpose of contract since the contract is works contract and any separation in the works is for better

management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and transparency

purpose which shall have no bearing on price or taxation payment.

Signature of Authorized Representative of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company

PART - A (Supply Portion)

Tender No. ACE(P&C)/Contract/E-456/TL/220kV/S&E

Shifting of 220kV D/C Viramgam –Tata Nano Line 1 & 2 with ACSR Zebra conductor from Location No. 60 to 69 passing through the plot of

Khoraj GIDC for proposed industrial plant by M/s Maruti Suzuki India Ltd. under deposit scheme (Option- 1).

Unit Ex-works Freight Insurance Unit Rate Rs

SN Name of Equipment/Material Qty. Unit Amount in Rs.

rate in ₹. in ₹. in ₹. (including F&I)

220kV M/C Monopole Structure having 2 peaks

for OPGW Cable (including designing, non-

1 destructive & proto testing, supply and

transporation cost)

GI Tower Material 1562.000 MT 145397.12 0.00

GI Bolt-Nuts 75.500 MT 173465.61 0.00

GI Tower Material - 220kV D/C Tower (Proposed 180.000 MT 103388.00 2355.00

ACSR Zebra Conductor 41.00 kM 435149.00 4285.00

5 220kV, 90kN Suspension SRI 60.00 No 4378.00 86.00

220kV, 120kN Tension SRI 336.00 No 4591.00 86.00

7 Single Tension H/W For ACSR Zebra Conductor 336.00 No 2773.00 49.00

Double Tension H/W For ACSR Zebra 0.00 No 5998.00 136.00

9 Single Suspension H/W For ACSR Zebra 60.00 No 2269.00 48.00

P A Rod For ACSR Zebra Conductor 60.00 No 1864.00 27.00

11 Vibration Damper For ACSR Zebra Conductor 456.00 No 1037.00 22.00

Mid Span Joint For ACSR Zebra Conductor 24.00 No 1035.00 15.00

13 Repair Sleeve For ACSR Zebra Conductor 24.00 No 452.00 7.00

24 Fibre (DWSM) OPGW Cable For 220kV Line 5.200 kM 145356.00 1999.00

Unit Ex-works Freight Insurance Unit Rate Rs

SN Name of Equipment/Material Qty. Unit Amount in Rs.

rate in ₹. in ₹. in ₹. (including F&I)

15 Hardware - Accessories and Joint Box For 24F 5.200 kM 45351.00 502.00

OPGW Cable For 220kV Line

48 Fibre (DWSM) OPGW Cable For 220kV 2.500 kM 195533.00 2385.00

Line(i.e. 24F for existing 220kV D/C Viramgam -

Nano Line No. 1 & 2 and balance 24F for future

220kV MSIL Lines)

17 Hardware - Accessories and Joint Box For 48F 2.500 kM 48279.00 644.00

OPGW Cable For 220kV Line

TOTAL COST FOR MATERIALS

Service of "Works Contracts" GST @ 18% (SAC 9954)

Total (with GST)

ERECTION PORTION

PART B (SCHEDULE - 01)

Tender No. ACE(P&C)/Contract/E-456/TL/220kV/S&E

Shifting of 220kV D/C Viramgam –Tata Nano Line 1 & 2 with ACSR Zebra conductor from Location No. 60 to 69 passing through the plot of Khoraj GIDC for proposed

industrial plant by M/s Maruti Suzuki India Ltd. under deposit scheme (Option-1).

Sr. Unit Rate in

Item Description Unit Quantity Total amount in ₹.

Item Description Unit Quantity Total amount in ₹.

1 Work of an original survey with line route alignment, preparation & submission of detail reports as per

requirement of EIC in 6 copies including excavation for trail pits in any type of soil for soil classification

work, the size of trial pits is 1x1x3 meter, 2 Nos. of such pits in 1 kM length & providing and fixing of pre-

cast permanent concrete blocks/stones of 150mm x 100mm x 300mm (LxBxH) on each deviation point /

trial pit on entire line with chain age / Trail Pit number (TP-1) painted on it as per instruction of the EIC. The

rate is inclusive of back filling of the pits so excavated after classification of soil for foundation.

Detail scope of Work :-

(a) Submission of feasible and shortest 3 numbers of line route on survey of India topo sheet and kmz file.

Also, fixing and submission of one final route on survey of India Topo Sheet, on google map and kmz file

as per requirement.

(c) Preparing tower schedule with details like type of tower with summary - Indication of all angle point with

fixing of suspension tower in between angle point, foundation type, sectional length, lat-longs (co-ordinate), kM 0.000 9,467.00

name of village, land type (Waste or agriculture), BOQ of foundation, BOQ of tower etc. as per requirement

(d) To take level of major crossing with detail & indicate detail about major nearby installation Like defense,

Airport, Oil filled etc.

(e) Submit all type of statutory details with drawing, which require for statutory approval i.e. Crossing of

Electric Line (all type), Gas Line, National / State highways, Railway, Canal, Forest etc. Importantly, any

work other than mentioned will align with the specific requirements outlined by the Engineer-in-Charge.

Note : The survey report will be submit with sign and stamp of the surveyor agency and engineer in

2 The work of detail survey, preparation and submission of profiles in 6 copies (PLSCAD as well as

Detail scope of Work :-

(a) Fixing of tower as per actual requirement, site condition and plotting of line on profile having standard

details i.e. span length, lat-long (co-ordinate), chainage,

weight and wind span, all dimensions, scale, legends, tower spotting data etc. as per requirement and

along with all require details.

(c) Preparation and submission of tower schedule as per standard require details with all the Major - Minor

crossing details in profile drawing and tower schedule,

along with due care of clearance as per prevailing standards i.e., for all electric line with pole, all type of

track, river, pond, nala, road, canal etc.

(d) Details of Right of Way in profile drawing. i.e. Building, Temple, Well etc.

(g) Plotting line on TIKKA-MAP (Revenue Land map) - Required TIKKA-MAP will be provided by GETCO.

Importantly, any work other than mentioned will align with the specific requirements outlined by the

Engineer-in-Charge.

Note : The survey report will be submit with sign and stamp of the surveyor agency and engineer in

3 Check Survey along with plotting of line route on village (tika) map with

Coordinates including detailed survey, preparation of profiles and revision in original route alignment, if any kM 0.000 9,277.00

and as per instruction of EIC.

4 Excavation excluding back filling, but including shoring, shuttering, dewatering,tree cutting for tower

footings etc. for

a) Normal soil either dry or wet /sandy soil Cu.m 465 307.00

b) Black cotton soil either dry or wet Cu.m 927 614.00

c) Normal Submerged / Marine Soil where Dewatering is necessary Cu.m 0 484.00

d) Black Cotton Submerged / Marine Soil where Dewatering is necessary Cu.m 1391 703.00

e) Soft Rock Cu.m 0 1,066.00

f) Hard Rock Cu.m 0 2,212.00

5 Installation of steel reinforcement in concrete foundation including supply of GETCO Approved M.S.

bars, binding wire. Work also includes their cutting, bending, shaping and binding with binding wire and

fixing in position of TMT bars as per drawing before the concrete work and as per instruction of the EIC.

6 Stub-Setting with Prop. or Template including back filling but excluding excavation and concreting etc.

for all types of towers / extensions except special towers. (Weight of stub, cleat & template with bolt & nuts MT 14 8,206.00

of stub & template shall be counted). (Up to 6 Meter Extension).

7 Stub-Setting with Prop. or Template including back filling but excluding excavation and concreting etc.

for all types of towers/extensions except special towers. (Weight of stub, cleat & template with bolt & nuts MT 0 9,918.00

of stub & template shall be counted). (Up to 9 to 25 Meter Extension).

8 Concreting of foundation by M20/M15/M25 mixture including shoring, shuttering, compaction,

dewatering etc. for normal tower / tower with extension upto 25mtr. After completion of concrete work,

curring (watering to concerte) is to be done as per instruction of EIC. (Rates are inclusive of supply of

GETCO approved Cement only.)

a) M20 Mixture Cum 975.00 12,246.00

b) M15 Mixture Cum 70.00 10,306.00

c) M25 Mixture Cum 0.00 15,153.00

9 Grounding of towers with pipe type earthing including excavation and back filling, with supply of all

materials like 32mm dia heavy duty 3 mtr. long G.I. Pipe, 50 x 6 mm G.I. flat, GI bolt-nuts, with GI spring Nos 24.00 8,985.00

washer, salt, charcoal etc. as per drawing and as per instruction of EIC.

10 Erection of super structure upto 6 meter extension including tree cutting, fixing of tower accessories,

attachments except ACD / DP / NP / CIP / PP and excluding tack welding of bolts as per instruction of EIC.

This includes taking delivery of towermaterials and bolt‑nuts from GETCO’s stores etc. for normal , MT 170.00 10,076.00

extension & special towers at destination and keeping them in safe custody and transporting the same to

Sr. Unit Rate in

Item Description Unit Quantity Total amount in ₹.

Item Description Unit Quantity Total amount in ₹.

Same as above but erection of 9 / 12 / 15 / 18 / 21 / 25 Mtr. Extension with Towers. MT 0.00 12,694.00

11 Fixing of Anti climbing devices including supply of plates and supply of G.I. Bolt nuts & tack welding as

12 Fixing of DP / NP / PP / CIP including supply of plates and supply of G.I. Bolt nuts & tack welding as per

13 Tack welding of nuts upto approx. 10 mtrs. height OR two bottom-most panel from ground level at three

places on the nuts diametrically and applying zinc rich paint immediately after tack welding and as per Per Bolt 20000.00 15.00

instruction of EIC.

14 Stringing of ACSR / AAAC conductors including laying, jointing, tensioning, clamping with armour

rods,hoisting of insulator string fixing of jumpers, dampers etc..

b) Six conductors - Double circuit

1.ACSR Zebra (06 conductor) Route kM 7.770 1,58,530.00

15 Dismantling of conductors and line materials of existing line including transportation & creaditing to

nearest GETCO's store or substation as per instruction of EIC.: Route kM 7.770 92,298.00

(A) COLD CONDITION- 6 Conductors Double Circuit

16 Complete Installation of OPGW cable (24/48 fibres) including laying, providing required hardwares, in

line splices to be encased in Fibre Optic Splice Enclosures, Laying and termination of a fibre optic

approach cable required to connect Overhead Fiber Optic Cable (OPGW) between the final iin line splice kM 5.200 97,193.00

enclosure on the gantry/tower and the Fibre Optec Distribution panel (FODP) to be installed within the

building at both the substation ends as per technical specifications.

17 Link up of OPGW Cable including all related activities as per inst. of EIC. kM 5.200 8,850.00

18 Dismantlingof OPGW cable with require accessories and creadit to GETCO's store OR Sub station as

per instruction of EIC.

19 Work of Painting of Line name, Location No., two coat Painting Color code of desired length and

telephone no. on Tower Leg with letter of Gujarati language using ISI marked Paint as per instruction of

EIC including Supply of paints and other require materials.

a) All four legs - For 4 Nos. of Line (M/C) Per Loc. 0 862.00

b) All four legs - For 2 Nos. of Line (D/C) Per Loc. 45 431.00

c) Two legs - For 1 Nos. of Line (S/C) Per Loc. 0 216.00

20 Dismantling of any type of tower including transportation & crediting to nearest GETCO’s store or

substation as per instruction of EIC. Per MT 45.00 8,434.00

21 Cutting of stubs of old tower to be dismantled including breaking of chimney/cutting of RCC upto 450mm

below ground level & crediting stubs & steel bars to GETCO's store or substation including back‑filling & Per Tower 9.00 12,618.00

leveling of site as per inst. of EIC.

22 Transportation of Girder, Rail, All types of Substation / Tower structures,

Conductor, Insulator, Cables, Hardware, GI Strips, Earthwire, Staywire, Furniture, Transformer Oil,

Breaker, CT - PT, LA, Panels, Battery Set, Battery Charger, PLCC Equipment, Isolator, Testing equipment,

etc from GETCO's nearest / any Store Centre / Substation to another destination including loading and

i) Up to 70 kMs (Upto 6 MT) - Lumsum

(To be executed / considered for a particular Job / Lot while weight is not increasing 6 MT per Trip like Job / Lot 20 16,848.00

transportation of 3 Nos of 66kV CT)

ii) Up to 70 kMs (Beyond 6 MT) - Proportionate Per MT 115 2,808.00

iii) Beyond 70 kMs* Per MT /kM 250 22.00

TOTAL SCHEDULE-01 OF PART-B

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL SCHEDULE-01 INCLUDING GST @18%

ERECTION PORTION

PART B (SCHEDULE - 02)

Tender No. ACE(P&C)/Contract/E-456/TL/220kV/S&E

Shifting of 220kV D/C Viramgam –Tata Nano Line 1 & 2 with ACSR Zebra conductor from Location No. 60 to 69 passing through the plot of Khoraj GIDC for

proposed industrial plant by M/s Maruti Suzuki India Ltd. under deposit scheme (Option-1).

Sr. Unit Rate in

Item Description Unit Quantity Total amount in ₹.

Item Description Unit Quantity Total amount in ₹.

1 Construction of Caisson foundation (including Excavation, Piling, Reinforcement, Setting of monopole

template, Fixing of foundation bolts, Concreting, Backfilling, etc.) for all types of 220kV Multi-Circuit

Monopole Structures wherever required including supply of Cement, Dewatering, Shuttering, Forming &

Curing including cost of reinforcement bars with M20 Mix concrete. (Total 14 Nos of Locations)

a) M20 Mixture Cum 2800.00 19,428.54

2 Grounding of towers with pipe type earthing including excavation and back filling, with supply of all

materials like 32mm dia heavy duty 3 mtr. long G.I. Pipe, 50 x 6 mm G.I. flat, GI bolt-nuts, with GI spring No 14 8,985.00

washer, salt, charcoal etc. as per drawing and as per instruction of EIC.

3 Erection of 220kV Monopole Structures with complete bolt-nuts, fixing with foundation including

bolt-nuts, Base - Plate etc. (Total 14 Nos of Locations)

4 Fixing of Anti climbing devices including supply of plates and supply of G.I. Bolt nuts & tack welding as

5 Tack welding of nuts upto approx. 10 mtrs. height OR two bottom-most panel from ground level at three

places on the nuts diametrically and applying zinc rich paint immediately after tack welding and as per Per Bolt 2155.00 15.00

instruction of EIC.

6 Fixing of DP / NP / PP / CIP including supply of plates and supply of G.I. Bolt nuts & tack welding as per

7 Stringing of ACSR / AAAC conductors including laying, jointing, tensioning,

clamping with armour rods,hoisting of insulator string fixing of jumpers, dampers etc..

b) Six conductors - Double circuit

1.ACSR Zebra (06 conductor)

8 Work of Painting of Line name, Location No., two coat Painting Color code of desired length and

telephone no. on Tower Leg with letter of Gujarati language using ISI marked Paint as per instruction of

EIC including Supply of paints and other require materials.

a) All four legs - For 4 Nos. of Line (M/C) Per Loc. 14 862.00

b) All four legs - For 2 Nos. of Line (D/C) Per Loc. 0 431.00

c) Two legs - For 1 Nos. of Line (S/C) Per Loc. 0 216.00

9 Complete Installation of OPGW cable (24/48 fibres) including laying, providing kM 2.500 97,193.00

10 Link up of OPGW Cable including all related activities as per inst. of EIC. kM 2.500 8,850.00

TOTAL SCHEDULE-02 OF PART-B

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL SCHEDULE-02 INCLUDING GST @18%