MAINT SERVICES FOR ELECTRICAL DISTRIBUTION SYSTEM OF MD AND OTM ACCN AT NORTH OF RAILWAY LINE

Amount

Fixing only in repairs for the complaints received of OTM and MD Accn against internal electrification work/nature including taking out existing light fittings of any description from any position, replacement of switch, socket, fan, bell, holders,bakelite/plastic laminated sheet top cover fixed with screws for housing switches, socket outlets, fan regulators, PVC cable etc. removing faults in wires, batten/conduit, Main switch/DB;s MCB complete all as specified and as directed. Note:- (i) Contractor or his acredited representative shall report daily to complaint cell for recieving complaints from concerened exectuive at 0900 hours (ii) Materials required shall be measured and paid seperately at Supply Only rates, Labour charges is deemed to inclusive in the UNIT RATE QUOTED. (iii) Work shall be excuted as on requirement basis based on complaints recived in MES Complain Cell. Contractor has to collect complaints daily (expect on Holidays) from from MES Service Cell, collect the job card and submit back to MES Complain Cell dully signed by User after rectification of Complain. (iv) Unserviceable materials obtained shall Credited to contractor under Sch of Credit (v) The tenderer shall note that scope of the subject work is to provide proper service for efficent and timely completion of repairs. Tenderer shall make suitable arrangement for providing Electrician, Helper as required (minimum 1 Nos Electrician and 1 Helper daily) or as directed by Engg-In-Charge

Supply only Switch piano, flush type single pole, one way 5/6 Amp complete all as specified and as directed.

Supply only Switch piano, flush type single pole, Two way 5/6 Amp complete all as specified and as directed.

Supply only Switch Socket outlet 2 in 1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.

Supply only Switch socket combination 2 in 1, 3 pin, 15/16 Amp flush type universal complete all as specified and as directed.

Supply only Switch socket combination 2 in 1, 3 pin, 5/6 Amp flush type universal complete all as specified and as directed.

Supply only Bell push, flush type, 5/6 amps, flush type complete all as specified and as directed.

Supply only Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and as directed.

Supply only Modular Switch 1 way 6 Amps, 1 module, complete all as specified and directed.

Supply only Modular Switch 1 way 16 Amps, 1 module, complete all as specified and directed.

Supply only Modular Socket 6 Amps, 5 pin, 2 module, complete all as specified and directed.

Supply only Modular Socket 6 / 16 Amps, 6 pin combined 2, complete all as specified and directed.

Supply only Modular Bell Push Switch 1 way 6 Amps, 1 module, complete all as specified and directed.

Supply only Modular Blank plate, 1 module, complete all as specified and directed.

Supply only Modular type White cover plate with frame 1 module, complete all as specified and directed.

Supply only Modular type White cover plate with frame 3 module, complete all as specified and directed.

Supply only Modular type White cover plate with frame 4 module, complete all as specified and directed.

Supply only Modular type White cover plate with frame 8 module, complete all as specified and directed.

Supply only Modular type White cover plate with frame 12 module, complete all as specified and directed.

Supply only Modular type Metal Flush box 1 module, complete all as specified and directed.

Supply only Modular type Metal Flush box 3 module, complete all as specified and directed.

Supply only Modular type Metal Flush box 4 module, complete all as specified and directed.

Supply only Modular type Metal Flush box 8 module, complete all as specified and directed.

Supply only Modular type Metal Flush box 12 module, complete all as specified and directed.

Supply only lamp holder, insulated PVC/ Polycarbonate body, with back plate suitable for batten/angle fittings complete all as specified and directed.

Supply only ceiling rose, 3 phase PVC/ polycarbonate, insulated body, three terminals, complete all as specified and as directed

Supply only Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Single pole & neutral with 200 Amps rated bus bar, 240 Volts,IP-43 protection, complete all as specified and as directed

Supply only Sheet metal enclosure for 8 way Distribution Boards (DB’s), IP-43 double door, Single pole & neutral with 200 Amps rated bus bar,240 Volts, IP-43 protection, complete all as specified and as directed

Supply only Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Triple pole & neutral with 200 Amps rated bus bar,240 Volts, IP-43 protection, complete all as specified and as directed

Supply only MCB, TPN, C Series 415 Volts, 63 Amps 50 HZ, 10KA complete all as specified and as directed.

Supply only MCB, SPN, C Series 240 Volts, 6-32 Amps 50 HZ, 10KA complete all as specified and as directed.

Supply only MCB, SP, C Series 240 Volts, 6-32 Amps 50 HZ, 10KA complete all as specified and as directed.

Supply only step type electronic fan regulator flush type (05 steps) complete all as specified and as directed.

Supply only LED luminarie tube light fitting basic all purpose surface/wall mounted decrotative slim with polycarbonate housing & integrated electronic driver, 4 feet LED with high efficient LEDs 20 watt, (or nearest next higher wattage) with all accessories, suitable for operation on AC, single phase 220/230 Volts, 50 Hz, 6500K complete all as specified and as directed.

Supply Only, Bulk head LED fitting with injection molded Polycarbonate housing suitable for 10 Watt (or nearest next higher wattage) with IP 66 protection & impact resistance not less than IK-10 complete with integrated type, with high efficiency electronic driver, & high brightness LEDs, luminaire efficacy > 100 lumens/Watt, power factor ≥ 0.95, operating range 140 to 270 V, 50 and connecting complete all as specified and as directed.

Supply only LED bulb 10 watt 5 STAR LAMP with B 22 base capacity 1200 lumen, 6500K complete all as specified.

Supply only, AC socket with MCB, DP 25 Amps, starter switch and socket with plug Top and indicator complete all as specified and directed.

Supply only, MCCB 4P 125 Amps,thermal magnetic release, 415V ,50 Hz ,breaking capacity 25 KA complete all as specified and as direct.

Supply only, MCCB 4P 100 Amps,thermal magnetic release, 415V ,50 Hz ,breaking capacity 25 KA complete all as specified and as direct.

Supply only, MCCB 4P 160 Amps,thermal magnetic release, 415V ,50 Hz ,breaking capacity 25 KA complete all as specified and as direct.

Supply only, 3mm thick bakelite/plastic laminated sheet top cover size 100mm x 100mm for housing switches, socket outlets, fan regulators etc complete all as specified and as directed.

Supply only, 3mm thick bakelite/plastic laminated sheet top cover size 200mm x 100mm for housing switches, socket outlets, fan regulators etc complete all as specified and as directed.

Supply only, 3mm thick bakelite/plastic laminated sheet top cover size 200mm x 150mm for housing switches, socket outlets, fan regulators etc complete all as specified and as directed.

Supply only, 3mm thick bakelite/plastic laminated sheet top cover size 250mm x 300mm for housing switches, socket outlets, fan regulators etc complete all as specified and as directed.

Supply only, 3mm thick bakelite/plastic laminated sheet top cover size 600mm x 1200mm for housing switches, socket outlets, fan regulators etc complete all as specified and as directed.

Supply only, twin twisted flexible cable, PVC insulated, stranded copper conductor of size 14/0.0052, 1100 Volts grade complete all as specified and as directed.

Supply only, twin twisted flexible cable, PVC insulated, stranded copper conductor of size 14/0.0076, 1100 Volts grade complete all as specified and as directed.

Supply only, ceiling fan capacitor 2.25 mfd as per site requirement heavy duty with metal body complete all as specified and directed.

Supply only, ceiling fan capacitor 3.15 mfd as per site requirement heavy duty with metal body complete all as specified and directed.

Supply only Electronic LED driver 8 to 25 watt 220/230/240 Volt, complete all as specified as directed of suitable make, complete all as specified and as directed.

Supply only Electronic LED driver 36/40 watt 220/230/240 Volt, complete all as specified as directed of suitable make, complete all as specified and as directed.

Supply only PVC casing and capping medium grade and connecting accessories like Tee , Bends , elbow etc required as per site of size 20mm complete all as direced.

Supply only PVC casing and capping medium grade and connecting accessories like Tee , Bends , elbow etc required as per site of size 25mm complete all as direced.

Supply only PVC Conduit duly medium grade and connecting accessories like Tee , Bends , elbow etc required as per site of size 20mm complete all as direced.

Supply only PVC Conduit duly medium grade and connecting accessories like Tee , Bends , elbow etc required as per site of size 25mm complete all as direced.

Supply only PVC square box 100mm x 100mm, closed recessed type complete all as specified and as directed.

Supply only PVC square box 170mm x 100mm, closed recessed type complete all as specified and as directed.

Supply only PVC square box 200mm x 150mm closed, recessed typecomplete all as specified and as directed.

Supply only PVC square box 300mm x 250mm, closed recessed type complete all as specified and as directed.

Supply only 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) complete all as specified and as directed.

Supply only 2.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) complete all as specified and as directed.

Supply only 4.00 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) complete all as specified and as directed.

Supply only 6.00 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) complete all as specified and as directed.

Supply only 10.00 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) complete all as specified and as directed.

Supply only 1.5 Sqmm multistranded copper conductor twin core PVC insulated sheathed cable 1100 volts grade (ISI marked) complete all as specified and as directed.

Supply only 1.5 Sqmm multistranded, multi core annealed copper conductor three core PVC insulated, PVC sheathed cable 1100 volts grade (ISI marked) complete all as specified and as directed.

Supply only 2.5 Sqmm multistranded multi core annealed copper conductor three core PVC insulated, PVC sheathed cable 1100 volts grade (ISI marked) complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of size 10 Sqmm 2 Core including taking down/ dismantling existing unserviceable service connection complete all as specified and as directed.

Supply only, energy saving & environment friendly long life 20 Watt,(or nearest next higher wattage) CT ≥ 6500 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection & impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more & high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor ≥ 0.90, operating range 140 to 270 V, 50 Hz complete including GI pipe bracket of adequate size as required (Light Grade) of length 1.2 mtrs bent to shape and fixed with 40mm x 5mm MS flat with necessary nuts, bolts, washers etc, painting with two coats of syntheic enamel paint over a coat of primer and connecting up with and including three core twisted flexible copper conductor cable of suitable size all as specified & as directed.

Supply only, round slim surface mounted LED luminarie 18 Watt, (or next nearer higher watt) 6500K with diffuser to ensure glare free and even light distribution & integrated electronic driver, with all accessories, suitable for operation on AC, single phase 220 / 230 Volts, 50 Hz supply, complete all as specified and as directed.

Supply only, Square slim surface mounted LED luminarie 18 Watt, (or next nearer higher watt) 6500K with diffuser to ensure glare free and even light distribution & integrated electronic driver, with all accessories, suitable for operation on AC, single phase 220 / 230 Volts, 50 Hz supply, complete all as specified and as directed.

Supply only, LED luminarie tube light fitting basic all purpose surface/wall mounted decrotative slim with polycarbonate housing & integrated electronic driver, 4 feet LED with high efficient LEDs 20 watt, (or nearest next higher wattage) with all accessories, suitable for operation on AC, single phase 220/230 Volts, 50 Hz, 3000K complete all as specified and as directed.

Supply only, 600mm x 600mm ultra slim mounted LED module with high brightness, de-glaring PP diffuser and PS LGP de-glaring sheet for glare free uniform light distribution suitable for grid ceiling LED luminarie 40 Watt, (or next nearer higher watt) 6500K with diffuser to ensure glare free and even light distribution & integrated electronic driver, with all accessories, suitable for operation on Ac, single phase 220 / 230 Volts, 50 Hz supply complete all as specified and as directed.

Supply only, LED bulb 10 watt 5 STAR LAMP with B 22 base capacity 1200 lumen, 3000K complete all as specified.

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Pipes, Cables etc and keep in safe custody for reuse, complete all as specified and as directed. Note : Earthwork will be measured and paid under appropriate Items.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core laid in trenches/ floors/ on wall/ run through pipe/pole and connecting to the main switches/ cut outs MCB/ MCCB/Pole with necessary lugs complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc laying of cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified and as directed.

M & L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180 mm thickness, complete all as specified and as directed. Note : For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid.

Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified and directed.

S&F GI Tubing light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clamp as per site requirement etc complete all as specified and directed.

S&F Shackle type, Porcelain, Vitreous, White or Brown Insulator of size 90mm height 75mm dia including Galvanised Mild Steel 31x3mm Strap, 12mm dia Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt, including Dismantling Insulators like from existing Street/ Security Light Pole complete all as specified and as directed.

S&F Insulator Pin type Porcelain, Vitreous, White, Brown or Green including one Galva-nised Mild Steel Spindle, Two Galvanised Iron Washers and One Galvanised Iron Nut, 100mm Height, 65mm dia for 1100 Volt grade including Dismantling Insulators like from existing Street/ Security Light Pole complete all as specified and as directed.

S&F Aluminium Conductor Steel Reinforced (ACSR) (sizes as ordered) with permissible Sags and providing Jumper, etc.,fixing on Electric Poles and binding to Insulators with Aluminium Binding Wire as in OH Conductors including stringing, tightening, etc., including Dismantling ACSR or AAC Conductors from the Disturbed Span including Line Spacer, etc.complete all as specified and as directed. NOTE: Cost of Binding Wire is deemed to be included in the QUOTED UNIT RATE.

S&F in repair, Cable jointing kit for LV/LT 1100 Volts cable for heat shrinkable type, End joint kit complete with jointing material and accessories suitable for 25 Sqmm to 50 Sqmm, 3.5 core XLPE armoured aluminium conductor cable including testing after jointing, complete all as specified as directed.

S&F in repair plug top 3 pin 15 Amp ISI marked complete all as specified and as directed.

S&F in repair heating element, Round type / tikona type / banana type, 1.5 KW 230 volts, ISI marked suitable for 25/35/50 ltrs geysers of any make complete all as specified and as directed

S&F in repair heating element, Round type / tikona type / banana type, 2 KW 230 volts, ISI marked suitable for 25/35/50 ltrs geysers of any make complete all as specified and as directed

S&F in repair thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed.

S&F in repair, capacitor suitable for motor 4 mfd as per site requirement heavy duty with Plastic casing complete all as specified and directed.

S&F in repair, capacitor suitable for motor 6 mfd as per site requirement heavy duty with Plastic casing complete all as specified and directed.

S&F in repair, capacitor suitable for motor 50 + 4 mfd as per site requirement heavy duty with metal body complete all as specified and directed.

S&F in repair, capacitor suitable for motor 50 + 6 mfd as per site requirement heavy duty with metal body complete all as specified and directed.

S&F in repair, capacitor suitable for motor 45 + 4 mfd as per site requirement heavy duty with metal body complete all as specified and directed.

S&F in repair, capacitor suitable for motor 45 + 6 mfd as per site requirement heavy duty with metal body complete all as specified and directed.

S&F in repair, surface mounting digital time switchs 240 volts, 50 HZ, one module and connecting with contactor complete all as specified and as directed.

S&F in repair, 4 Pole Power Contactor 40 Amps complete all as specified and as directed.

M/S RANA ENGINEERING ENTERPRISE (BID ID -3124906)

RC Madan (BID ID -3125908)

Shree Krishna Traders (BID ID -3144483)

shree kamakhya traders (BID ID -3139342)

M/s AKRITI ENTERPRISE (BID ID -3141804)

bkgeneralstores (BID ID -3137827)

Saraswati Auto Works (BID ID -3137151)

Satya Enterprises (BID ID -3136316)